Re: Unable to create recovery Satellite A300-1NA discs

Similar Questions

• How manually to create the Satellite A300 recovery DVDs

  Hi all!!

  My cousin interrupted at first startup of Vista, resulting in a constant error while switching on the laptop (say a word about the disconnection of a camera or a media player). I decided to perform a clean install of Vista Home pre and everything was ok.

  I have a return to the top of the HDD Recovery folder and tried to burn a DVD using as prototype of my recovery dvd (A200-1J0) who proved not bootable.
  So, I would like to know if it is possible to make a recovery dvd manually (which means that without the wizard mentioned in the user manuals) for laptop Toshiba A300-17N.

  Something like this is not possible. If the folder HDDRecovery still exists on the second partition, please start your laptop and press F8 for advanced startup option. Use first option on top for the repair of computers. Follow the menu und opt for Toshiba HDD recovery.

  Reinstall the OS and create recovery DVDs using Toshiba tool preinstalled.

• Satellite L850 - 1 5 - unable to create recovery media

  Hello

  I tried to create the recovery disks for my Toshiba Satellite L850 - 1 5 Toshiba and I inserted the first disc and burning has started and then the disk check. I then received a message to say the creation of drive 1 has failed. How can I create recovery discs if I get this message?

  Please notify
  Thank you very much

  Which blank media are you using?

• Satellite A300 Toshiba Disc Creator (for Win 7?)

  Hello

  I have the Toshiba Satellite A300 model, the original comes from OS with it is Vista 32 bit. I've recently updated the laptop for Windows 7 Ultimate.

  I downloaded all the applicable programs associated with Windows 7 32 - bit, up to now, all worked perfectly smooth... However, I searched for the Toshiba Disc creator and found none in the Toshiba download page.

  This is the link that I use:

  HTTP://EU.COMPUTERS.TOSHIBA-EUROPE.COM/INNOVATION/DOWNLOAD_DRIVERS_BIOS.JSP?SERVICE=EU&BANNER_ID=HOM E_RSL_DRIVERS

  If someone could help me in this and redirect me to the download page for Toshiba Disc creator (for Windows 7 32-bit). would be appreciated

  Concerning

  The Toshiba Recovery disk Creator is only available as part of the original image of Toshiba.
  You can download this tool.

  See also this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=56007

  It's the same theme...

• Satellite A105: Unable to create recovery CD - missing rdc_info.ini file

  I have a SatA105 without a recovery disk, but there is a utility called Recovery Disc Creator thereon. But when I try to start it, it gives me an error message that the rdc_info.ini is missing or damaged.
  It's there, so I opened it, and he is looking for a plug to the address Z:\giinfo.ini which is not found!

  What does that mean? I can't make a recovery disk? or can I get a copy of someone, and then going to work? Or is recovery not a disk info only the computer not more?

  What can I do now?

  Hello Jim

  Unfortunately, I don't have a model of cell phone US and don t really know what the problem is here. Generally avoid problems if you use the pre-installed recovery disc creator. The image is stored in the hidden partition.

  Be sure that you do it on the right track. How it works exactly, you can read HERE

  Otherway you should contact the partner in your country. I'm sure they can help you or perhaps to create a recovery media for you.

• Unable to create recovery discs, burning fails - F:\07007XSP.swm

  whenever I try to create the recovery disks it starts to burn, then I get the error:

  Cannot read the next file.
  F:\07007XSP.swm

  (error code: 020150-20-00000000)

  How can I solve this problem?

  The problem is that you used is not compatible DVD disc.
  Test different DVD. I use TDK DVD-R and I think it's very good brand.

• Tecra M7: Unable to create recovery CD: lack CDDVD.ini - INI file load error: RDC_info.ini

  I recently bought a Tecra M7, but the system does not include recovery media, just a recovery partition and a recovery disk creator.

  However, when I try to run the Recovery Disc Creator, he responds with "error loading INI file: C:\Program Files\Sonic\RecordNow!\RDC_info.ini.

  I opened this file in an attempt to determine the error, but the content simply refer to a file named CDDVD.ini. I looked everywhere in the hard, even mounted the recovery Partition, but could not find this file.

  Search on Google, I found that this case is regularly brought disappeared, and that without it, the recovery media cannot be created. A person said Tech Support by sending an email the file, another was sent by another user.

  In both cases, the user was immediately able to make records. In any case, there seems to be a standard file, referring to the "Add_info.ini" (Application and drivers disks) and "Rec_info.ini" (OS Recovery Disk), fairly uniform and unchanging across all systems that use this method to create discs.

  Please, could someone email me them or post it here so we can all see?
  If/when I get this file, once I determined it works I post here.

  Daniel

  Hello

  You can buy a set of recovery disc for Toshiba for all £17 and£ 18. Maybe it will help if you can't find the file.

  Thank you...

• Portege Z830 - Unable to create recovery media

  I'm trying to create a recovery media on my portege Z830 with the "toshiba recovery media creator.
  Unfortunetely, it says "no zone of restaurants on the disc": the only thing I did was to create an inactive partition with Windows Disk Manager.
  I checked, the recovery partition exists.
  With the warranty, will I receive a free restore DVD?

  > the only thing I did was to create an inactive partition with Windows Disk Manager.
  That of the problem. Pre-installed application is designed to find the recovery image on specific position using what is called markers.
  Now the application is confused and can't find it.

  Why didn t ask here what you can do until you have made the decision to change something?

  To get the disc for free? I put t know if it will work. Problem is that your obligation is to read s operating manuals and learn about your new product, before changing anything.
  You can try to contact Toshiba service nearest and ask for help. That's all that I can say at the moment.

• Question on recovery Satellite A300

  My laptop needs restoration because it doesn't let me go on windows or whatever it is, that I have ready disks. But this model has two hard disks built and all the stuff I want to keep are stored on the second hard drive, if I reinstall windows will be on the second hard drive to be deleted as well?

  Im not bothered what is on the main hard drive, but want everything on the second hard drive.

  If this is not deleted everything what in it if I take the second hard drive then reinstall windows then plug in what would happen then?

  Thank you

  Alex

  Hello

  I think the first HARD drive would be to format this means only the HARD drive where windows operating system is installed could be formatted and all partitions would be deleted.

  Greetings

• Satellite A300-1NA - Wake we possible keyboard?

  First I want to say hello to everyone because I'm new here, because I bought my Toshiba a few days.

  I wonder how exactly "Wake on the keyboard" present works.
  Is it possible to turn on my PC with USB keyboard connected instead to raise the lid and pressing the power button on my laptop?

  Anyone know where I can find any guide the user to the BIOS of my laptop?

  Have you read the user manual?

  It should be a soft copy (Format PDF) in C:\DOCS or in the Start Menu.

• Failed to create recovery disk

  Hello!

  I apologize in advance for my English.

  After a year of perfect operation, I decided to completely restore my system (Windows Vista Home, HDX 18 Premium, 64-bit) using the hidden partition. Everything was fine.

  A week ago, my PC didn't start because he does not recognize the hard drive: no operating system found. No partition has been found, even the hidden (in my system is E).

  I tried to reset the BIOS and I was right: the booted system, performed all necessary diagnostics and load Windows.

  So, I decided to create a recovery disk to restore the system, even if no partition is found.

  But I have been unable to create recovery disks because the Recovery Manager utility froze, did not write any DVD, and after three hours, I had to turn off the PC, because nothing happened.

  My creation of recovery disks is slightly different from the pictures I've seen in many forums: instead of asking what kind of media, I would like to use (DVD, CD) and how many of them is needed, it simply shows a green bar: writing files, from 0% to 100%. When he arrived at 100%, it froze and nothing happened.

  Now I can not create a new set of disk (the program starts, but its window disappears immediately), even if the PC is running and I could (probably) restore the system using the hidden partition.

  Now:

  (1) are useful recovery disks if the hard drive is not recognized at all?

  (2) since it is possible to create a set of disks only, the failure of the attempt account?

  Thank you!

  You are welcome. Be sure to also follow the Macrium prompt to create a bootable cd. Label it as Macrium rescue and set aside to care for the child. Then whenever you need to restore your laptop to your Image backups, just boot with the cd and it guides you through it. Works even if Windows is too damaged to start.

• No option to create recovery/usb drives

  I used my x 220 laptop for a year now and I am trying to port my OS on to a new drive mSATA I recently installed, but cannot create recovery disks to do this. I use rescue and recovery 4.5 for windows 7, but I don't see any option to create recovery/usb disks. I see only options to create a backup of my regular HARD drive and "create recovery media", which only seems to copy the service program of rescue and recovery, thinkvantage on the USB. I know that data that are installed on the USB key is not correct because it is about 500 MB, while I've read online that the complete recovery disk should take about 8.4 GB. I also know that I never created before recovery disks. Y at - it something that I'm missing is not let me create these disks?

  hitokirix wrote:

  is there an easier way to do this?

  It's been a while since I've done it, but it worked in all situations where I tried: call Lenovo support and declare that you are unable to create recovery discs. There are several legitimate reasons to do this, for example from my experience...

  1. my X61s did not come with a DVD player and I don't have a DVD USB drive connected.

  2. my T60p reported all kinds of program errors when I tried to use the utility provided to create diskettes.

  3. an another ThinkPad (don't remember the model number) had a HD crash under warranty. Lenovo sent me a replacement HD but I had no recovery discs. (I had backups Acronis full score but Lenovo didn't and I didn't volunteer).

  4. one of my friends refused the license agreement for Windows on its ThinkPad. Instead, he decided to try Linux. After a few weeks of frustration with Linux, he decided to return to the Windows fold. Since he had not accepted the license to the first start agreement, it had been unable to create recovery discs.

  If your system is under warranty in my experience that Lenovo will send you a set of toll-free recovery disks. You may need to be a little persistent, but as long as you keep it clean, you should get them. Note however the last time I did that was at least 3 years ago so their policy may have changed. Also note that, in any case, my request is legitimate. YMMV.

• Satellite A300-211 - can I use creator of recovery disk to create other discs?

  My laptop is Satellite A300-211

  My question is can I use the Toshiba Recovery Disc Creator program to burn CDs and DVDs next to the Windows image?

  Hi mate,

  The Toshiba recovery disc creator can create the Toshiba Recovery disk and that s all!

  If you want to burn the other CD or DVD, you can use other software such as Nero or CD Burner XP. The last one is a free and really nice. It has many functions and is very low. Check it!

• Cannot create a recovery for my Satellite A300-1BZ CD

  I tried to use the Toshiba Recovery Disc Creator repeatedly and with many different brands of discs to create the recovery disk.
  However each time as the laptop is about to finish burning the disc, there is an error and the operation not can be completed.

  I don't think there is a problem with the drive as I have used for many other things including watching movies without problem.
  Could Toshiba please send me a recovery disk instead?
  Thank you

  > Could Toshiba please send me a recovery disk instead?
  A mail recovery disk? Very interesting. Mailed 4 GB image is not so easy.

  I don't know what you're doing, but if you want good tip then use Verbatim or TDK DVD-R blank media. For the DVD-R.
  I have too many Satellite A300 and recovery DVD, I created successfully.
  Do you use DVD-R virgins too?

• Re: Satellite A300 - error creating recovery disc

  I'm not really providing any solution, but is facing a similar problem with my laptop Satellite A300-1EI, bought in Dubai, UNITED Arab Emirates. I tried to make records of recovery through Toshiba Recovery Disc Creator. However, each time, I got an error message. I tried with Verbatim, Philips DVD-R and lost several DVDs. Meanwhile on the net surfing, I discovered that the engraver of DVD from Toshiba is a little sensitive and try to use Verbatim DVD - R brand. I tried with Verbatim 2 days and at the last moment when I was about to dance with joy that the first DVD is created, received an error like below

  * "The following issue occurred during the recording of the data of the disc.*
  Current process will be stopped.*

  * A power calibration area error occurred.*
  * Please check if the disc is scratched or dirty.*
  * If Yes, please try again with a new disc.*

  "* (Error code: 0E01B5-26-00037304)."

  I don't really understand the message. Can advise you on how to create the recovery disks.

  Kind regards
  Vijay

  Hello

  To me, it seems that the used DVD discs are not completely supported by ODD.
  It seems to be a compatibility issue.

  I had this problem in the past, but I could resolve it using another DVD from another manufacturer.
  I had a good experience with TDK DVD-R.
  Using the R disk I was able to burn the disc, but using the + R I received an error message.

  See you soon