Re: USB Ports on my S Satellite series do not work
I recently bought a toshiba satellite s-series and the usb ports don't work - code of host controller compatible usb xhci 39
I tried the things:
-research on the internet for all issues
-Search the support site for drivers but they do not provide drivers usb for my laptop.
-Update and uninstall the driver.
-"Add legacy hardware" via Device Manager
any help is greatly appreciated
Post edited by: raafen
If you need assistance, you must post the name of the exact model laptop and the OS you are using.
After installing Java rebooted my system update, while booting it showed Eroor message 'BootMGR' missing, disabled bymistake USB ports, now my keyboard & mouse not working does not help?
Hi Abhi SR,
· How do you disabled the USB ports?
· What you did to fix the "BootMGR" error missing?
If you have disabled the USB ports in the BIOS (Basic Input Output System), you will need to use a PS2 Keyboard and enter the BIOS for their re help.
Note: Changing the BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.
Hope the helps of information. Please post back and we do know.
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
I have a phone Samsung SGH T305, but not internet access for my phone. Just a phone with a camera. To transfer pictures to my PC, I connected a usb cable and PC. I can't send them to my e-mail through the cable. I don't know how to retrieve pictures from the camera.
See if that helps
With my LG, I used a memory card and move the photos to the card. The device must be queued for mass storage until you will see the folders using the usb cable. If you use a memory card, don't forget that it snaps into place. Otherwise you will never see the folders if is not installed correctly.
USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.
It's a new 12 '' MacBook
my hp photosmart C4600 Printer series does not work via my bluetooth USB 2.0 Wireless printer adapter, I run windows 7
He ran once before, one of my suggestions of solution was the coil (?) was incorrectly, but don't know how to adjust it
(1) have you made changes before the start of this issue?
(2) what is the exact error message/code?
A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print. If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, Spooler subsystem or spooler resources, you might need to change and then restart the print spooler service on your computer.
To do this, we recommend that you save your work and restart the computer to restart the print spooler service. If you do not want to restart the computer, try these steps.
To change or restart the print spooler serviceYou must be logged on as administrator to perform these steps.
a. click the Start button, Control Panel, click System and Maintenance and then click Administrative Tools.
b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
c. right-click on the print spooler service and then click Properties.
d. on the general tab, next to startup type, make sure that automatic is selected.
e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.Additional reference:
Open printer troubleshooter.Let us know if that helps.
My WD 3 USB drive does not work in the 3 USB Ports on my Lenovo W530 lap. But work in the regular ports. What can I do to fix this?
Do not use windows update for drivers.
Update your drivers Lenovo support and see if that helps
If the lenovo is new, you can contact Lenovo support to asertain why usb3 ports apparently do not work
Hey well im disappointing defetly of Pentecost suport of toshiba, they never anwser mi email, and when I call for the support that they did not fix the problem mi! After 2 monthas waiting they never remember!
My Bluetooth on Satellite L500 does not work! I have upgraded from vista to 7 suport said that I probably had to put the Vista pc again to install the bluetooth, and upgrading them to 7. IM whit vista of Pentecost after using the restore cd.
After that I read some post and install the drives still does not work!
I try to install bluetooth monitor, then the battery Bt when battery is installing wask me to activate the bluetooth I use Fn + F8 and the battery does not install it!
Just do so for sure:
You have enabled your wireless switch?
I have a Satellite M70-159 and I am looking to buy a 2.5 external HARD drive ".
I would like to know if the power supplied by the USB port of my laptop is 500mA or 1000mA because the disc external HARD I want to buy needs 1000mA to work.
Eitherwise what I can do to provide external power to work HARD disk?
To my knowledge the notebooks USB ports provides the standard power of 500 my.
Generally if an external USB HDD what needs more than 500mA so special, the power cable external power is supplied with version 2.5, HARD drive or HARD drive comes with a double USB cable.
I hear double cable USB cable that supports 2 USB Sockets. In this case, you can connect the HARD drive to two USB ports.
This picture date of arrival:
[Double USB cable | http://www.n-c.fr/webshopncrevendeurs/catalog/images/Double_Cable_USB.jpg]
I installed the pcmcia card with BIOS update V2.1 and work under WIN XP sp2.
It seems to work normally in Device Manager, but when I plugged in the USB, it may not recognise.
If I can access usb PCMCIA ports.
This laptop does support USB 2.0?
How can I make it work?
It is a brand new model Toshiba and I guess that it supports high speed USB 2.0.
Sometimes, the operating system can not recognize external USB devices due to the limitation of power. The fact is that the USB port gives the 500mA. It is a standard value.
If the USB device use a higher power, the OS cannot recognize and activated the device.
In this case the external power supply is necessary. Another possibility is to use the USB hub with an external power supply.
Without a paid with Apple Developer account (waiting to have in fact my first AIR for iOS app works correctly), I created the .mobileprovision and .p12 files successfully in Xcode. With these I figured out how to debug in the Debug of Animate version iOS Simulator > DebugMovie > iOS Simulator but I can't debug my device (iPhone) via the USB port. ("Impossible to install the application. Make sure that the selected devices are connected. ") Connected and on. No problem with the available memory.
Past the other road, I published with success (he said) but my iPhone will not complete downloading the app in iTunes and even less using the 'post publishing' check in settings to install on my selected iOS device of publication. It is there no dialog, no explanation why... simply "the application was published successfully."
I moved the .ipa file in iTunes and on my device. It says it is syncing but then goes with anything. I once accidentally dragging the icon of my iPad where it has at least tried to install it. The dimmed icon appears on this device with "install...". "below, but it was not built for the iPad, so I trashed it after a few hours.
I have watched the video of Adobe and don't see what I'm doing is different.
In Xcode, there is a window of devices. You can select your iPhone and check requests in this regard. Try dragging the IPA in this list. It may still fail, but I hope that Xcode will give a better error message.
It is a faster way to much to get applications on devices using iTunes. If it does not copy OK you can then try remote debugging in Animate and then open the application. The IP address of your computer, you must have this ready to type in.
I have a P10 (PSP13E-0372V) that I have upgraded from XP Home to XP Pro. Everything went very well and then I discovered that I don't have a COM port or at least Device Manager shows no COM port.
If I try to dial, I get "Error 633 the modem is in use or not configured properly". Back to Bishop device to watch the modem which, it says, works very well. If I query the modem (Diagnostics) told me 'port that the modem is attached could not be opened. "
Also, it is said it is attached to COM3 but I can choose any port and get the same result. (When I change the port I get the message "the port has been opened by another application. Renaming the port may have an unpredictable effect on the other applications")
I tried to remove the modem and restart but no change.
If anyone any ideas how I can get the modem to work.
So any ideas on how
Usually WXP Home, Pro should work without any problem because all the drivers, tools and utilities can be used for the two operating systems. I just hope that you have preinstalled all things in order of good facilities.
Have you installed the driver chipset from Toshiba download page right?
It's all in the title. Several people on the internet told me to buy a usb cable to vga to connect an external monitor. I did it and it does not work. Can you help me? I have windows 8.1.
HE will get another. cable converter, best I'll try it and then I'll come back. Thank you very much for your help!
Flesh of 4 GB disk used on USB for ready boost on Windows Vista Premium generates this massage: device is connected to an unsupported interface. Ready boost is to boost the prossesing power. I have updated BIOS and run Microsoft Fixit without change. I have no idea what this interface, or what to do about it. Prayer does help. Thanks to this smart one that can help you.
There is a chance that the drive that you want to use is too slow or has a problem of memory even if
It passes the speed control (many have a quick memory in front of a lot of memory slow and those
will pass the speed control but will not work correctly). See the end of this message for car
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
Then lets refresh the USB stack
Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices
Now look everywhere EXCEPT the USB controllers for your device (cannot be found) and if you find
It RIGHT CLICK and UNINSTALL all. The device is your thumbdrive (s) or similar.
Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB
This KB shows XP how to and the method of Vista is identical
If necessary try these two:
Tips for solving problems of USB devices - and a Mr Fixit
Hardware devices not detected or not working - Mr. Fixit
DON'T GO OUT AND JUST BUY A READER WHO CLAIMS THAT IT IS READY - READYBOOST
many of them are or stretching at least the truth. Look at the sides of the player below and buy
a you know is FAST.
storage. And you need a fast reader.
ReadyBoost - list of speed Flash memory
How to find the index of ReadyBoost speed
USB Flash Drive speed - driving tests size
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
I was updating my BIOS.
My computer restarted abruptly, saying: there was a problem and that a check should be performed.
After reaching 100%, he's stuck. I waited for a while, but eventually it turned off.
When I rebooted, it stopped working correctly.
The screen, keyboard and USB ports do not work.
Can anyone help with this?
Looks like something was wrong during the update of the BIOS.
In this case the module ROM was flashed properly and therefore your laptop cannot start properly.
I think the BISO ROM must be flashed again, but this can be done by a Toshiba ASP because guys have had a trad-BIOS version that is necessary to Flash the ROM module
I tried to Flash my BIOS through windows such as recommended on my website of the manufacturer of the laptop (Toshiba). I guess that the process was not as after only 2 hours still "don't interrupt" message displayed. I had to force power off of my PC. Now it is not initialized.
The Laptio is Toshiba SA50-114, series of satellites. Model n - PSA50E
I tried the suggestions in the following link
However, it did not work.
However, I don't have the disk recovery and file/ROM BIOS tool. Have tried to search on the internet, but without any result.
Can someone help me please
1. How can I update the BIOS to get my PC to running back.
2. to turn towards links where I can find the files in the link above.
Thanks in advance.
> 1. How can I update the BIOS to get my PC to running back.
Not possible if your ROM BIOS module was bad flashed.
If you are a lucky man only the ROM module must be flashed again using a special procedure. But this can be done by a service provider authorized in your country.
> 2. Point me to the links where I can find the files in the link above.
There is no link! You need to ask to help ASP.
Maybe you are looking for
I want to insert a signature that I hosted on a web server without having to create and save the local html file on my computer, is it possible? I know that I can insert a picture from a web server as part of my signature, which is not what I'm askin
Can't go beyond da power on password. Help, please. Disabled code: 73106362
I have a Subvi, which is dynamically load by several sie. How can I debug the Subvi for each instance? It seems that I can open only a copy of the Subvi but I want to get the front panel for each instance. Is this possible? Thank you! Tom
At startup, message reads as follows: "Configuring Windows Updates, 0% complete, do not turn off your computer" Four minutes, it reads: "configuration failed. Revert the changes. Windows-7 64-bit system. Not useful control panel. Please help: * e-m
Once I finalized burn my dvd, Director of windows, the lower part of the screen out of green. Before I burn it to dvd, I saw in creation of windows dvd, that green is not on the screen, please notify