Re: Vista will not start after the installation of update

About 2 days ago I updated 2 Optional updates through windows update. It was - Input - Synaptics Synaptics PS/2 Port TouchPad
and somethind to do with sound hdmi (don't know why I got this update ' cos I do not have a hdmi and I accidentally installed it as well).
After that installs Vista won't start so I did a restore of the system in safe mode, and she came back to life, however, isn't in better shape, will probably not not to install Vista all over again.
So be careful when you install these updates.

It's weird that they came with windows update. As much I know usually windows update does not update if not needed harddrivers...

You need to update your hardware drivers from the Drivers Toshiba download site and not from Windows update because no one knows if they interfere with the drivers of Toshiba.

Tags: Toshiba

Similar Questions

  • Windows 7 does not start after the installation of updates - sounds familiar!

    Apparently, I have another system that no longer starts after you install an update to Windows 7. New kick computer _ I have to disable the automatic update of windows. Twice I had to restore the system in the first week because he hung up after the installation of updates for windows 7. I have no idea what update is the cause of the problem.

    Essentially, start the screen goes black with the cursor blinking in the upper left corner of the screen. The only way out is to restore the system.

    Does anyone know what update is the culpret? HP support has no idea. Their only solution was to update windows 7 to 'never download an update from windows '. It is a terrible thing to be underestimated solution.

    Here's the resolution...

    I installed all the updates except KB2284742 954430, 973688 and 971033. So I decided to install these 1 4 at a time in the order shown. I installed successfully 228472 and 954430 and 973688 disappeared from the list of available updates. So I installed 971033 and it installed successfully and I was still able to restart.

    My conclusion is that there is a conflict between the first 3 updates when they are installed at the same time.

    Now my system is up to date with all windows updates and I'm able to restart without any problems!

    Close this message.

  • Windows Vista will not start after the automatic installation of the patch Ms.

    My Dell laptop does an automatic installation of the latest MS patches (12/08/10) and now he can't boot into windows.  All tests show that the material is fine, but an error at the end of the "bad update patch" said test results I can not even to go back to a previous restore point.  This happened to me the year last on my desk... same thing, but it's XP which could not start after an automatic update for the Member States.  Dell technical support told me that MS knows what is happening, but it is not supposed to be public knowledge.  I need to know if there is a fix, in addition to erase everything and do a complete reinstallation of the operating system.

    Follow these steps to try to solve your problems of boot.

     

    Restore point:

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    Do Safe Mode system restore, if it is impossible to do in Normal Mode.

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    http://www.windowsvistauserguide.com/system_restore.htm

    Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     

    If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    See you soon.

    Mick Murphy - Microsoft partner

  • Computer will not start after the installation of Kaspersky, will not even go into safe mode

    I tried to install Kaspersky on my laptop this morning to roll some viruses on my computer. After you restart during the installation, I got the blue screen of death with a STOP 0x000000F4 error code. I can't use my phone at all now, and it will not work in SafeMode either. I tried to restore the computer to before that Kaspersky was installed but it cannot do so. I tried to restore to the last known good configuration, but that did not work. I have no idea what to do now. My laptop is basically useless now and I am very angry.

    If I have the Kaspersky disk in I kind of access Kaspersky, and it keeps telling me it is obsolete and must be updated, but it will not be updated. Also, it tries to mount the drives or something and gets stuck trying to create the swap file. I don't know if it's important, but I'll post it anyway.
    I'm at a loss to know what to do...

    If you have tried to install an AV program after your PC has been infected you left it too late.

    Your safest option is to use your recovery discs to get destructive if you plant (make sure that the external devices are disconnected during this process)

    I hope that you, the data has been saved you will lose everything on the PC

    Once recovered allow windows update to do its thing for Important updates ONLY. It may take several reboots.

    If any update fails cure this problem before doing anything else.

    Once the update finished visit of manufacturers of laptop for important driver updates to update necessary.

    Only after this has been done, you should start installing software or external devices.

    If an installation fails, solve this problem before

  • Satellite L300 - will not start after the installation of Skype

    My Toshiba Satellite L300 won't start after installing Skype.
    This happened to someone else, and can I do?

    Thank you.

    I think Skype is probably the most used messenger and ideal application for communication.
    It is professionally designed and programmed. As you know in recent years, it has been offered in many different versions and it is always better and better.

    So I think that Skype itself is probably not the problem. I know that a lot of people also use Skype and I've never heard problem described.

    Anyway, what you can try is to remove Skype and try to install it again. Try also push the BONES at that earlier time. Maybe some Microsoft updates are responsible for the stability of the software.
    It's really not easy to say what the problem is here.

  • ENVY M6 - 1184ca: 8.1 for Windows does not start after the installation of update KB2919355

    Updating Windows 8.1 KB2919355 has proved to be extremely problematic for me. When he was released at the beginning of 2014 that I was not able to get installed it with the exception of two occasions, the first being several months ago and the second time, a few days ago. I have constant pain to try to get the update of KB2919355 until recently. What finally got the update installed was opened as administrator command prompt and type the following commands,

    DISM/Online/Remove - Package PackageNameackage_for_KB2919355 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.3.1.14 

    and then

    DISM / online/cleanup-image /startcomponentcleanup

    So now, the update of KB2919355 has been installed. Only one problem: like the first time I had the installed, Windows Update leave commissioning. As the HP splash screen that normally appears during the startup process appears after about 3 seconds, Windows displays an error Stop, and for a fraction of a second will display SYSTEM_THREAD_EXCEPTION_NOT_HANDLED error, which as I read, is related to the graphics drivers. The thing is, after the cancellation of the update (the computer in Mode safe start put Windows automatically uninstall the update and everything goes well after), then go in and uninstall the graphics driver, restart, reinstall the graphics driver and reboot again, and then reinstall the KB2919355 update, the problem recurs. I also tried to download and to install the new update of firmware for my particular DESIRE machine which was released a few days ago, but which has not helped either.

    I'm really stuck. I looked up and down, and I scoured Internet for anything that might help. I need to update KB2919355 be installed because without it, I can't book my free upgrade of Windows 10. This laptop is about 2 years and a half old now, so it fulfills all the prerequisites for Windows 10.

    Please do not suggest that I do a Refresh of the system or a system reset, as I have no way to back up my programs, that which some I would not be able to reinstall because I have more drives for some of my programs. Also, I can lose to save him for some of my games.

    When people ask me "What's up?", I always say 'the CAP '.

    So that seems to have solved the problem that is described in this post here. I followed the suggestion, which was to uninstall the driver, SPDT DuplexSecure (which has something to do with the SCSI devices, I'm not quite sure) using the SPDTinst (download here) and now it seems that Windows has started without crashing after installing the update KB2919355. I'll check my Windows Update history and see if it is there.

    Low and behold, a year to be really behind value is ultimately more. I have successfully obtained the update of KB2919355 works on my computer.

  • Reviews of Ubuntu does not start after the installation of updates

    I have a Windows 10 host and a guest Office Ubuntu 15.10. Ubuntu installs and runs fine until I have install updates, and then it gets so far through the boot sequence, but blocks trying to start the GUI.

    What should I do?

    Hello

    can confirm: after installing the last invited Ubuntu patches of the slaughtered 3.16.0-62 core during startup.

    Latest posts is: failed to start the vmware services.

    logfile VMware stops at the loading HGFS subsystem.

    To access the guest computer resolution: Boot with advanced options (hold SHIFT to start, until the menu loader grub is shown). Now select boot option (!) lower than 3.16.0 - 62.

    With 3.16.0 - 60, the guest operating system will start normally. Reinstallation or reconfiguration of the vmware tools don't fix this behavior. If something seems broken with kernel 3.16.0 - 62

    Any solution with core 3.16.0 - 62?

    Best wishes

  • Computer will not start after the installation of Windows Vista SP2

    After downloding and installing Windows Vista SP2 on ACER laptop for my daughter, I can no longer start the computer.  Initially registered startup C:\\Windows\System32\drivers\ecache.sys as corrupt file repair.  Change BIOS to boot first from the optical drive and the departure of computer with Vista DVD in the drive, I accepted the option repair.  No chance that the machine always fails to start and always displays the window "Statup repair."  Auto repair is always unsuccessful.  Repair suggestions will be appreciated.  Thank you.  Bob G.

    Support Microsoft still offers a FREE support for Vista SP2.  Go to: https://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034&st=1&wfxredirect=1 where they will help you.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Fusion 6 will not start after the installation of the .vmwarevm backup file

    I searched online for a certain time but impossible to find a solution, that I understand.  I know little of virtual machine technology.

    I've been in VMware Fusion 6, trying to find a way to reduce disk space on the virtual hard disk.  I screwed things up and restored my previous Windows 7 x64.vmwarevm in the /Virtual folder on my retina MacBook Pro Machines.  I expect merger to be happy with what was a working configuration.

    When I try to open this file in Fusion 6, I get the following message:

    Unable to get information from snapshot: failed to lock the file.

    Instant module market failed.

    Unable to start the virtual machine.

    In settings / hard disk settings are as they were originally.

    No idea where to go from here?  I don't have the data backed up separately.

    I'm not on Boot Camp.

    The log file has entries of several 'permission denied' when it comes to create files in the folder/vmwarevm. As a first step, check the permissions of the file/folder.

    André

  • computer does not start after the installation of updates

    Just click on the button "installs the update and the computer shuts down."  When the computer turns off automatically, I pushed the power button and now it is frozen the computer in start mode.  What should I do now?  Can I power off and try again (or which will mess up the configuration of the update that he just installed.

    Note: There are 21 updates installed last night without problem; then 1 update again (that set up correctly when I restarted this morning).  After a successful this morning launch, I noticed there was an another update to install, which is what made me at this point.

    Single computer at home (I use my work computer to submit this application).

    Wait awhile and see if, during the initialization of the problem to be solved or not. It is NOT a good idea to unplug the laptop.

    If this does not work, then try to press F8 and choose last known good configration, but you may need to reinstall the update again.

  • System does not start after the installation of update (10thFeb10)

    Updates to auto (windows Update) using.  Downloaded automatically update yesterday (10thFeb10) and when I shut my computer down it started to install them - as usuall.  However start my computer than this 11thFeb10 am and he began to run through regestry files when starting up.  Then it is impossible to load windows.  Just went to a blank screen.  Rebooted several times and were able to start it in safe mode.  Tried system restore but the same thing happens.  Obviously there was something to this update that 'changed' my computer and I'm not happy about it!  Also thought that there could be new updates (perhaps to fix the last update) but I can not even Windows Update to open it.  Tried online and he tells me that I have never downloaded updates and that none are available.

    I use Windows Vista Ultimate x 86.  I hope someone can help me!

    Got a response from Ms.  Good all who have this problem - you have an ATI Radeon graphics card?  Driver is causing the conflict.  Uninstall all the stuff ATI goes on ATI web site and install the download of 'single driver '.  Reboot and then you can download and install other fancy programs that come with your graphics card.

  • computer does not start after the installation of vista updates.

    computer does not start after the installation of vista updates. Startup Repair is also not working. event name: Startup Repair v2, prob GIS. 1: automatic failover, prob GIS 2: 6.0.6000.16386.6.0.6001.1800, prob 3:6, prob prob 5 and 6 GIS GIS sig, 4:720907: corrupt file, prob GIS 7: 3221226021, 8:3, prob GIS GIS prob 9: repair wrp, prob GIS 10; 2, 0 s version: 6.0.6000.2.0.0.256.1. In addition, none of these advanced recovery options seem to work.

    Hello

    Try the steps suggested by David Y post dated November 2, 2010 in the link given below and check if that helps.

    http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/a6071159-db22-4076-b5d8-31f446dbdf32

    Hope that information was useful

  • ITunes does not start after the installation of Windows 10

    ITunes does not start after the installation of Windows 10, 1511 version (OS Build 10586.164). ITunes version 12.3.2.35, 6 GB RAM, Intel i3 @3.3 GHz. Itunes and Ipodserver module will run by Manager jobs, but Itunes does not open. iTunes starts in SafeMode as explained in the link below (hold SHIFT and control on your keyboard while you open iTunes).

    Fix unexpectedly closes or problems of launch in iTunes for Windows - Apple Support

    Solution, according to this link, is:

    If the problem does not occur in Mode safe, remove any third party plug-ins iTunes: solving problems with third party plug-ins - Support Apple iTunes but the link has been archived, and I can't find any plug-ins installed iTunes. Any other ideas?

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

    Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

    More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

    Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

    TT2

  • XP does not start after the installation of avira. Blue screen: STOP: 0 x 00000024 (0 x 00190203, 0 x 87174270, 0xc0000102, 0x00000000)

    Original title: xp does not start after the installation of avira

    I have a HP Slimline s7410
    XP Home Edition SP3
    I had Norton free with Comcast, but since I have no more Comcast became Norton expired. So I uninstalled Norton and installed the free version of Avira, he scanned the computer and it was clean. I went to reboot and now it does not start.
    I have a cd/dvd drive of work.
    I don't have an XP bootable installation CD

    My system worked well until: I installed the free version of Avira

    Whenever I select one on the XP advanced options options menu start, it goes into a boot loop.
    I turn off the auto reboot system failure although it seems only work once, as the next time he's trying to start up it goes into the boot loop.

    Here's what my BSOD looks like:

    Disable or uninstall any anti-virus, disk defragmentation or backup utilities. Check the configuration of your hard drive and check the updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

    Technical information:
    STOP: 0 X 00000024 (0 X 00190203, 0 X 87174270, 0XC0000102, 0X00000000)

    Any help is greatly appreciated! :)

    My first suggestion is to do a system restore at this time point.

    second suggestion is to keep your external drive connected to the pc at all times.  only detach when necessary.   of course, it would be better to install a second hard drive in the computer instead.   in any case, keep your personal files out of the system disk is a wise thing to do.   You can also download and store files for free on the Microsoft Skydrive site.

    third suggestion is to keep your system set upward through executing a check disk and Defrag at least once a month.   Basically, you can open the Explorer and right-click on the drive letter.  then select Properties, and on the Tools tab, you will have the opportunity to run the disk check.  then reboot and do a Defrag.   where this disk check fails, then you will need to run it to the drive via a bootable cd prompt.

    Interestingly, I don't know if the bootable cd that you made you allows to run the disk check.

    so my suggestion is to do a series of tests using your cd bootable your computer works.  see if you can actually run a chkdsk/r at the moment with them.    If Yes, then if your constant worries are having bad sectors on the hard disk, chkdsk/r will identify and mark so windows will jump on them.    in any case, see if your boot at the moment media can run a check disk at all, and let me know.

    fifth proposal is to install "microsoft security essentials" like your anti virus program.  even if you have run ubantu, it is not likely to have been an infected copy.   anti - are most critical virus for windows and not not so much for ubantu or linux is because windows is a system of world class operations.    the people who make the virus deliberately their engineer for the windows operating system.   If, however, ubantu and linux have been just as popular as Windows, virus engineers would make infections for the o.s. too.     Although they no doubt, attacks are more frequent for the windows os.

  • Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process.

    Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process, but do not remember.
    Tried running firefox.exe Pei but error message:

    XML parsing error: the undefined entity
    Location: chrome://mozapps/content/profile/profileSelection.xul
    Line 18, column 1:
    "< dialog < =" "^ =" "p =" "> < / dialogue >

    Running on Windows XP SP3. No problem whatsoever before moving to 27. Sending of Chrome that I can't open Firefox at all.

    Thank you, jschaer2000. In the meantime, he works. How long, we'll see ;-)

Maybe you are looking for