Re: What position the caddy a Satellite Pro 6100 use?

I recently acquired one of the old machines out there I have an I was wondering where can I get the internal carriages of?
Second, this model uses a hard drive spindle adapter?

Thanks in advance!

This SP is very, very old model laptop so I put t think you can order somewhere try to check eBay. You will find lots of different parts for old models of laptops. In the worst case buy a defective SP 6100 and use it for parts.
> Secondly, this model uses a hard drive spindle adapter?
I n t think so, but you can check it yourself. You can remove very easy HDD. HARD drive cover is fixed with a screw. When you remove the HARD drive cover, pull the disk block HARD on vinyl of the HARD drive battery handle.

Tags: Toshiba

Similar Questions

  • How to clean the cooling on Satellite Pro 6100 module?

    Since my laptop for some reason stop (explained in my last post), I read messages from others who are similar to my problem and some of the responses that they was that they must clean the cooling with a vacuum (vacuum) module.

    So I was wondering how to clean it and where is it? (I m not an expert on computers)

    Hello
    I am not owner of a Satellite Pro 6100 but I saw this laptop on several pictures and it seems that the fans are placed at the rear near the CC.
    If you try to vacuum dust and debris from these grids of fans.

    I found also found a very detailed instruction how to remove and open the Satellite Pro 6100. http://www.irisvista.com/tech/laptops/Toshiba6100/Toshiba_Satellite_Pro6100_dismantle_1.htm

    BUT if you have no experience, you must do it yourself. The best way to ask someone who knows what to do!

  • 'Bad RTC battery, check the CMOS' on Satellite Pro 6100

    Hello... I just got a Satellite Pro 6100 and when it is started I get an error message:

    RTC BATTERY BAD
    BAD CHECKSUM (CMOS)
    Check the system. Then press the [F1] key
    _

    I can still use the laptop for about 15 minutes, but then it crashes. I did some research and discovered that it is the power supply Board. But my laptop is out of warranty and the reminder is now officially over.

    Y at - there someone who can help me?
    Thank you
    Liam

    Published by: admin

    Hi Liam

    Hmmm... I think it s not a Council but the battery of the CCF.
    Take a look in the user manual. There you should find something that exactly the message is displayed if the battery RTC (BIOS) is not charged.

    The RTC battery, you must connect the power adapter and should run the laptop for about 24 hours.
    After that the main battery has been charged, then the RTC battery starts to load.

    It will take a little longer.

  • What is the mainboard on Satellite Pro M30 productnumber?

    Hello

    I need the Productnumber motherboard for my Satellite. Modell Nr.: PSM35E-000NU-GR

    Thank you.

    It is not easy to find that information except you will try to ask Toshiba service in your country. They have access to the database of Toshiba s and can help you about this.

    In any case, trying to verify the number P000400260. It should be the correct order number.

  • Need help with the upgrade of the WLAN on Satellite Pro 6100 minipci card

    Hello everyone, I desperately tried to update my WIRELESS card on my laptop SP6100, since it was delivered with a card minipci wifi-b, which is not fast enough today. s standards.

    Each piece of the Toshiba official documentation mention the SP6100 has a mini-PCI type 3a slot, so can accommodate two minipci card a type 3a and 3B wifi.
    But unfortunately for me, I discovered the hard way that it is absolutely NOT the case - I was put back by a fortune by buying costs for a type3 intel minipci wifi card, which does NOT at all on the laptop.

    I spent an hour in unnecessary calls to the customer service from Toshiba, that I had to convince PCMCIA certainly isn't the same as miniPCI, and Mini - PCI cards ARE CERTAINLY replaceable by the user. She insisted that she could not be changed by the user of the system, but by toshiba themselves.

    Could someone please please advise me on the type of wifi card that are built with the SP6100 laptops? I think is it AGERE brand, in the form of WLAN minipci card. I know that it IS certainly NOT miniPCI type 3.

    Help, please! Thank you.
    And besides, every place that I tried so far appears only sell type3 miniPCI cards,
    Other types of Mini-PCI cards are available to retail customers?

    Infinite thanks!

    Hello

    You must understand that your model of laptop is quite old and right now the market wasn't available standard b. I'm pretty skeptical that you will be able to use the standard WLAN with G maps due to compatibility issues. On this forum, I founded several threads that people write about the problems of upgrading older models of laptops with the new wireless network cards.

    In my opinion the best solution for you is to use a PCMCIA WLAN card. The installation should be easy and you can use the wireless network with faster data transfer adapter.

  • Satellite Pro 6100 - battery icon indicates 0% and courier mouse disappears

    Hi all

    I'm new to this so hope I'm posting in the right place.

    I have the laptop above Satellite Pro 6100 and am having some problems that I hope that you guys may be able to help me with.

    The first problem is that the battery is fully charged, but the icon on the screen says 0%.
    He fled feeding okay and if you disconnect battery lasts for all time and a half.
    If I try to defrag it does not have enough power?
    So I have to defrag in safe mode.

    The other problem is that the mouse disappears off the coast of the right side of my screen and it takes forever to find him!

    Would appreciate some advice or solutions like like the laptop and not really wanted to get a new one at the moment.

    Oh am running windows at home.
    Thanks in advance.

    Eve x

    Update the BIOS and set the default values.

    You could try reinstalling the common Modules for Toshiba and energy savings.

    If all else fails, there is the opportunity to back up your data and run recovery. If it happens again on a new installation of Windows, it may be a hardware problem.

  • Re: What can I do to get my Satellite Pro 6100 from the dead?

    It's now quite a few years I have a * Satellite Pro 6100 *. I recently had the following problem.

    * _Problem_ *.
    When I press the power button to turn the computer into the AC power light starts flashing orange light (flashes come in groups of eight, the second and eighth flash are longer). Nothing else happens: the computer is dead as a brick. To stop the flashing, I have to disconnect the main power supply and remove the battery.
    * + Note: the power supply is ok.

    * _Question_ *.
    What should I do to restore normal operation?

    Thank you

    Post edited by: hnav

    Hello

    I put t think you will be able to do anything that would bring back the laptop from the dead.

    According to your description books sends a flashing error code that appears always if a motherboard error has been detected.

    In your case only an ASP might help you.

    First, the technician would be able to read the code and then to know what part is malfunctioning.

    In the worst cases, the motherboard must be replaced; (and this could be a costly affair.

    Good luck

  • Need to drive caddy HARD and coverage for Satellite Pro 6100 HARD drive

    Does anyone know the part numbers or to get a hard drive caddy and the Satellite Pro 6100 Series hard drive
    Thank you

    What caddy did you? Internal an external 2.5 USB caddy for a HARD drive or the case?
    I think that if you need a domestic framework for laptop you should order it since the maintainer authorized Toshiba in your country.
    I think that guys should be able to order something like this directly from the Toshiba store

  • Satellite Pro 6100 turns off when I connect the power adapter

    Satellite pro 6100 works well up to this I put AC adapter / CC, then turns it self
    Any ideas would be appreciated

    see you soon

    Hello

    You use original Toshiba AC/DC adapter or another?
    What happens if you connect the AC/DC adapter, while the laptop is turned off?

    It s really strange problem, but I think that is s TI associated with AC/DC adapter or the motherboard itself

  • How to remove the bios password on Satellite Pro 6100

    Hello
    I got this Satellite Pro 6100, I would like to install windows xp on it, somehow once I opened it, it's just a black screen with the password.
    I removed the hard drive and I was able to access it with my computer, means that the password is not for the hard drive, but rather the bios.
    What is the password of the bios? How can I reset it? I removed the Green battery which I think it is the RTC battery, it would make? How long should I wait for the settings to be reset to zero?
    Y at - it no jumpers to reset the bios... ?
    I don't know what my son used a password, so I need help with this...

    Is it possible to kill the bios settings... ?

    Thank you

    Hello

    It seems that the machine has a BIOS password. And it seems that there are only 3 options:

    1 Google for the procedure how to remove a BIOS password
    2. ask your son for the password
    3. send your machine to an authorized servicepartner and allow them to remove the password, which means that you pay money for it.

    Welcome them

  • Satellite Pro 6100 - what CD/DVD drive that I can use

    What DVD player is supported by the Satellite Pro 6100?
    I need to upgrade

    Thank you much for the help.

    Hello

    May I ask if you took a peek in the user manual?
    In most cases, information on compatible CD/DVD players are placed in the user's manual.

    Just for the note; You can also order a compatible CD/DVD player with ASP in your country!

    Check it out!

  • LED flashing - need to know the Satellite Pro 6100 POST error codes

    When I tried to turn on my Satellite Pro 6100 laptop the Green DC in power light turned orange and started to blink.
    It flashes 5 times, then 3 times then repeats.

    I guess that this indicates a failure in the system, but where can I find what means this error code?

    Hello

    You can read the flashing code very easily short flashing means 0 long average 1.
    Then you read the complete code back.

    Finally, the error code must be converted into HEXADECIMAL value and then a technician of the laptop could know what means this value.

    The ASP in your country should provide details of the mentioned error.

    Welcome them

  • Satellite Pro 6100: cursor moves out of control on the screen

    Hey guys,.

    I'm seriously going crazy right about now... my problem is the following:

    I have a Toshiba Satellite Pro 6100, Windows XP Professional with SP2, memory: 512 MB.

    About two weeks ago my cursor began to move up and down whenever I pressed the space bar. It has gotten worse since. My cursor moves out of control across the screen (there are usually in the upper right or lower left) and I can not recover. I know for a fact that it has nothing to do with my external mouse (optical), because this problem also occurs when I use my pointing device. Even in safe mode.

    The thing I've tried:
    Ran Spybot: Search and Destroy
    Ran Adaware
    Xoftspy RAN
    A ran Symantic Antivirus 10 (complete analysis of the system in safe mode)
    New keyboard
    New motherboard

    Nothing helps. I'm this close to format my pc. Does anyone have a suggestion of what to do?

    Thanks in advance!

    Hello

    I put t he understand. You have changed the keyboard and the motherboard, but you did not recover the OS with the Toshiba Recovery CD.
    The first procedure that you should do is the new installation of the OS before you change or replace anything on the laptop.

    Unfortunately, it is not easy to say why it occurs. A friend of mine has a similar problem with the cursor. The cursor has jumped on the screen and it was not possible to open applications. It has (or service) resolved with the replacement of keyboard.

    If the new installation OS doesn't fix this strange cursor, so I recommend you contact Toshiba.

  • Satellite Pro 6100 - how to change the date and time in the BIOS

    Hello

    I received a satellite pro 6100 that had not been used for some time. Windows does not work then he reinstalled with the good drive.

    When I try and windows 'enable', I get the error 32777 and the laptop is unable to connect with the activation servers that a google leads to believe me that the date and time are incorrect in the bios.

    I know that Press esc to access the bios but there is no option to change the date and time in there. I put the date / the correct time in windows, but this does not seem to synchronize with the bios. I've updated to the latest version of the bios, but this is not enough.

    How can I change or update the time in the bios?

    Thank you

    Hello

    I doubt this time and date setting BIOS does affect Windows activation time Windows doesn t affect it in my opinion. There must be another reason for this problem.
    You can activate Windows by phone?

    Normally the date and time in the BIOS can change you if you mark the date or time, and then press on + or - to change this. Sometimes you have to press PageDown/to the top according to the model of BIOS or laptop.
    Usually in the configuration of the BIOS you will find a brief info how changing the values.

    Check this box!

  • Satellite Pro 6100: black border to the right of the screen

    After a new installation with windows xp when I star tup I have a black border (1.5 cm) to the right of my screen.
    After the beginning and the end of the screen saver, I have a full screen.
    but when my laptop started again I have this black border again.
    I have a satellite Pro 6100.

    Management information
    System
    Model = laptop
    Manufacturer = TOSHIBA
    Serial number = 0000000000
    UUID = ffffffff-ffff-ffff-ffff-ffffffffffff
    BIOS Version = Version 1.90

    OPERATING SYSTEM
    Caption = Microsoft Windows XP Professional
    Version = 5.1.2600 Service Pack 2

    CENTRAL PROCESSING UNIT
    Index = 1
    Manufacturer = GenuineIntel
    Name = Mobile Intel (r) Pentium (r) 4 - M CPU 1.70 GHz
    Version = model 2 Stepping 7
    Max clock speed = 1694
    Socket designation = uFC - PGA Socket

    Display
    Index = 1
    Horizontal resolution = 1024
    Vertical resolution = 768
    Chip Type =
    The RAM size =

    Very strange problem! Can you please tell us more about this problem? I assume that you have installed the OS on your own. Since when you noticed this weird display problem?

    Have you noticed this immediately after installing the OS (without driver)? Did you install the display driver on Toshiba support page?

Maybe you are looking for

  • timer watch OS 3.0 - can I change the timers etc 1,3,5,10, standard?

    Just upgrade to watch OS 3.0 - love the timer app now has default timers (1,3,5,10,15 and 30 min + 1 and 2 h). I have the referee youth soccer games with 25, 30, 35, 40 or 45 minute halves. It would be GREAT to be able to set/add those as the default

  • SELPHY CP710

    Unable to print my on Selphy CP170 United Nations document. Everything is plugged in, connected and turned on, the document was sent, he is on the waiting list, it is stated that it is printing but nothing happens.

  • ScanJet g4010: do not install scanjet following usb and usb-hardware driver issue?

    Hello I tried to install the scan of a brand new computer and encountered the following problem: I downloaded the package of appropriate software (full software and driver) from HP Web site, I start to install and get a message after the first stage

  • Windows Defender will not update

    IHAVE windows XP Defender. For the last 6 month'sit will not be updated. Icannot find the shortcut to run the program. When the download of microsoft, windows defender update updates will not install. Help appriciated.

  • Want to K204TX: A factory reset will erase my custom partitions?

    Problems with Windows (installed programs are NOT displayed is the Control Panel / programs and features). When I got the laptop, she had 2 partitions (visible), a C:\ with almost the entire HARD drive is assigned to the and a D:\ (Recovery) of about