Re: Windows Vista HP. symptom: failure using the VxD loader.
I did a check of System Diagnostics and the report came back like: failure using the VxD loader. A device has a configuration issue preventing it from working correctly. Devices: Reader CF USB, USB MS Reader, reader SD USB, USB, xD/SM Reader and MMC storage reports "tv_ConfigMgrErr19". How can I fix it?
Thank you for your response. I acted on your suggestion and he returned with the "windows resource protection found no violations of integrity." Then I read somewhere to uninstall and reinstall devices, but I uninstalled devices portable usb cf, ms usb, usb sd and xd/sm in error. I didn't know how to get them back so out of curiosity I made re the system diagnostic and the problem disappeared, the only mistake was d drive is less than 15% free. I did something wrong?
Tags: Windows
Similar Questions
-
Window Vista. Loading failure using the VxD (code 19) charger?
I scan my computer and it says that my compact flash is not working and 'Failed to load using the charger VxD (code 19)' how can I fix.
Also when I play all the games, such as mabinogi, the game begins to lag very much, even to freeze sometimes, thinking its because of this error. Computer was fine before I booked the error. Help, please.
Hello
19 error code means there is a driver conflict such as two devices attempt to use the same resources.
Run the Fixit diagnosis toll from this link to automatically fix the problem.
Hardware devices do not work or are not detected in Windows:
http://support.Microsoft.com/GP/hardware_device_problemsKind regards
Afzal Taher-Microsoft Support.
Visit ourMicrosoft answers feedback Forum and let us know what you think. -
Loading Vista error Code 19 window using the VxD loader?
Hello!!
recently, I noticed an error in my Device Manager after strange Beaver on my computer, it will start the slow race, and now it freezes up while my son is using it to play games on line.used of administrative tools to find out that a USB Loader is corrupted because failing
Register it read > Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) you have an idea what the problem or have a solution. I try to update the drivers but not not any good any ideal how to solve this problem thanks...Hello sylar2009,
Thank you for visiting the Microsoft answers community.
This can occur when more than one service is defined for a device, if there is a failure opening the service subkey, or if the driver name cannot be obtained from the service subkey.
Uninstall and reinstall the driver
· Click on Start Orb > type device in the search box > click Device Manager
· Click the arrow to expand CD-ROM/DVD-ROM readers
· Right click on your DVD > click Uninstall
· Reboot and let Windows install DVD
Drivers update from the manufacturer's Web site
· Click on Start Orb > type device in the search box > click Device Manager
· Click the arrow to expand CD-ROM/DVD-ROM readers
· Right click on your DVD > click Update driver software
You should take a look at this article on Code 19 / 43 Code: http://support.microsoft.com/kb/310123
Also take a look at this KB article: http://support.microsoft.com/kb/314060
Hope this helps
Chris.H
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows Vista does not start. The BIOS loads then black screen with blinking cursor.
So my friend told me that his PC was not working. When you press the power button on the pc, the screen of the Dell BIOS load but instead of starting then Vista it shows just a black screen with a blinking cursor. Still, the BIOS detects the hard drive and has the ability to boot from it, but it just that again. I tried the recovery disk windows, and when you click on the "Repair" option when it loaded usually shows a list of the operating systems installed and their hard drives. There is no listed on the Vista recovery cd. Manually, you can browse and find the partition from the OS than its sequel, and clearly see the windows directories. It all simply not start, nor let the recovery disk to fix it because the operating system is not detected. I plugged the hard drive on my pc with the same results. Then I started my Win 7 and Explorer, disks and partitions are once again still visible with the appropriate directories. Windows says the drive is working properly and has no file system errors. When viewing in the hardware Manager, he says it's healthy (primary, active partition). My hard drive working correctly says healthy (boot, pagefile, primary partition). Why used it boot and why the recovery disk not recognize the operating system and how can I fix it or do I need to format and reinstall vista?
Hello
You can try the troubleshooting provided in the link below steps to fix the problem.
Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem
-
The Windows Vista startup disk crashes after the screen "loading files".
I am trying to install Windows Vista on a new computer. The computer recognizes the boot disk and I can go beyond the "Loading files" screen, but when I get to the screen that looks like the standard login screen, the menu to install Windows never appears. The display will be just what it was. Any help would be appreciated.
Hello Trey
I suggest you see if there is an update of the bios for the motherboard. You can also check out the link below and see the suggestion given by Tim Quan. -
Windows Vista into hibernation after using the FLASH
Hello
I am running Vista Business and whenever I look at everything which requires FLASH my PC will keep hibernating after 1 minute. I'm unable to locate just why he does this. I've seen sites tell me how to turn off the HARDWARE ACCELERATION in FLASH PLAYER, but it does not help. Everyone knows about this problem?
Help!
Have you gone to the power options, power management, and check the setting into hibernation? For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.
-
Failure using the VXD (error Code #19) charger
I wonder what I should do to remedy this?
See if the information above helps you.
See you soon.
Mick Murphy - Microsoft partner
-
Failure using the charger VxD (Code 19).
Norton 360 detects the unusable device;
Failure using the VxD (Code 19) charger
F:\ G:\, H:\ and I:\
Type Devives Protable
Generic Manf
Location: On UMBus Emunerator
Device status Windows cannot start the device hardware information (in the registry)
is incomplete or damaged (Code 19)
What is - this and how I can fix it.
My computer is a series of beeps 3 x 3 about 30-40 seconds after the connection.
Thanks for any advice. John
Hi jcjohn
Does not offer much help, but I picked this up in the Norton Community Forum
http://community.Norton.com/forums/Code-19-failure-loading-using-VxD-loader
With a possible solution from Microsoft:
http://support.Microsoft.com/kb/314060
If the problem is not resolved, try the Norton Forum:
-
When activating my windows vista ultimate product, I get the response that the license key is already in use, let me know how to solve this problem?
KiranS Hello,
Judging by your post, it seems that Microsoft had technical problems when you tried to activate your copy of Vista by phone. Have you tried phoning the line Activation again?
The normal procedure is that if the activation fails through the automated system, the call is transferred to a real person. It is the only available option if you get the error 'use existing product key'.
I can only suggest that you try again the activation by phone and see what happens.
This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.
John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com
-
You use windows vista Ult; Impossible to format the dvd for backup, do not know dvd is in the drive. able to read other DVDs
Hi, Virgil,.
1. what kind of DVD are you trying to format (DVD + R or DVD + RW)?
2. you receive messages or error codes when you try to format the drive?
You can check if you are able to format the DVD in another computer.
You can also read the following article and check:
-
Windows vista error - catastrophic failure - error occurred during automatic backup of files
- Windows vista service pack 2
- error 0x8000FFFF catastrophic failure code
- update browser GOOGLE chrome
- Run the disk check, have also partioned disks (supplied with the new laptop), but still keep on this error
SOLUTION:
The solution to the problem, I met is the following:
Step 1: RESTART your computer, press F8
Step 2: select the first OPTION (depending on the manufacturer of your computer, it may be first or second, and so on...)
The option is: fix my (the) computer
Step 4: It will load the same in SafeMode (just an example), select your OWN USER NAME (though more are available), log in as an ADMINISTRATOR (if you are the one)
Step 5: It will change into a small window asking you connect by using the command prompt: check this option (this may vary according to manufacturing, but it should be there)
Step 6: Now when you log in you should see X:\Windows\System32 >
Step 7: Change of disk C, D or E (essentially select your disk where the OS is installed)
NOTE: If NO leave are present select your ONE and ONLY by CAR.
If left are, for example: D and E (D contains BONES, E contains - your stuff)
Select drive with OS, i.e. D drive
Step 8: After your decision to step 7, it would look like
X:\Windows\System32\C:
Step 9: The result would now be C:\ >
SO BASICALLY WE ARE ACCESSING THE HDD FROM OUTSIDE
Step 10: Type Chkdsk/r/f
Step 11: wait for the results
The first 3 steps will be complete as soon as POSSIBLE, the 4th and 5th stage will TAKE ABOUT 120 minutes (variable, based on the hard drive, the computer specifications and especially your processor)
The result should tell you more about the DEFECTIVE AREAS, indexing ERRORS and similar stuff, and also they could be repaired.
When finished: TUPE OUTPUT
At the end of OUTPUT
and REBOOT
step 12: now even ONCE, go to the BACK UP CENTER, launch a NEW BACK UP, it should work :)
NOTE: I appreciate the incredible help with MICROSOFT research, engineers who were very thoughtful and dedicated to get my problem sorted out and help out me.
All these steps are suggestions for these engineers, NOT MY JOB: p
KUDOS TO MICROSOFT AND HIS TEAM!
See you soon,.
Jay
BTW: these guys who gave METHODS of TRIALS AND ERRORS, thanks to you also, I learned a lot.
-
Windows Vista - How can I move the buttons in the taskbar to the left side of the taskbar?
Windows Vista - How can I move the buttons in the taskbar to the left side of the taskbar? Someone has used my computer and now they are on the right side you can see 2 programs at once. I want that they start on the left and run through the whole (not just two value windows) task bar so I can see all and switch between them by clicking on them.
Right-click on the taskbar and unlock it. There will be low vertical bars between the sections of the taskbar. Place the cursor on one and drag it to the left. You have to play a little, but you will get it. -
Original title: several installation update of Windows Powershell 2.0 and WinRM 2.0 for Windows Vista (KB968930) but fails with the error 800b0100 - tried Code recommended fixed but nothing works - any ideas? Alan R
Installer standalone and patches already installed - laptop Medion used - all other updates loaded ok - also tried PC Tuneup of Maestro.
Hi Alan,
Thank you for visiting Microsoft Community.
To resolve the problem with the installation of the updates, follow these methods:
Method 1:
See the article and check if that helps:
Error 0x800B0100 when you try to install updates for Windows or Microsoft Updates
Method 2:
Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
For more information about how to back up the registry, see the link:
Back up the registry
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
I suggest that you follow the steps described in the article and try to reset Windows Update components:
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
I hope this helps. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.
-
Product key bad for the wrong version?
Hello
Recently the computer in business inherited from a friend, very fast and very good. Regardless of the operating system no - geniue, is with Vista Business, while the thumbnail of authentication is Vista Ultimate. I took a screenshot of what it says when I put Vista Ultimate product key: (it does not appear if you are unable to use it: P)
http://S13.PostImage.org/57nfn5pqv/vistareg.jpg
He said: "the product key you entered will not work with this edition of Windows Vista. You must run the Windows Vista Setup program or enter a Windows Vista Business product key."
How would the installation of Windows Vista? My files would still be there when you need him? My drivers would still exist? No matter what to get deleted or become unusable? He would return to SP1? Any response is welcome.
You can order form of the manufacturer's recovery media.
The reason why the system as non-authentique shows currently is using a license in Volume KMS - these licenses must be re-activated at least every 6 months by connecting to the KMS user license activation server.
It will require a reformat and reinstall whatever you do, unless you can connect to the KMS - Volume media server cannot be upgraded under normal conditions.
-
I bought a laptop HP three years ago in Dubai, now I am in India, my family problem does not activate windows vista and also use it now, I try to use but asked the system to activate product key not found the product key at the bottom of my laptop I enter the product key but the system says "the product key you entered will not work with this edition of windows vista.» You must run the windows vista Setup program or enter a windows vista product key. "In my company sticker a HP laptop, it says" Windows Vista Home Premium, also found in computer ownership 'Windows Vista Ultimate' and as low property said: you must activate today and return their product ID: 89580-014-0000025-71152, but in my laptop near the product key, wrote a different number which is "89580-014-0000025." what is the problem and how to solve that advice me please. ""
Hello
You can use this Recovery Partition to reinstall Vista to his new condition with the right edition of Vista.
This recovery partition was photographed on your hard drive by HP during the manufacturing of the factory.
You press F11 on startup to start the process of recovering back to factory settings.
Here is the information about HP.
http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703
If the recovery partition is damaged, you can buy HP's Vista recovery discs for a small fee.
If HP's Vista recovery disks, you may need to try this instead:
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:
"How to do a clean install and configure with a full Version of Vista '
http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html
And phone Activation may be necessary when you use the above installation method.
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
See you soon
Maybe you are looking for
-
No satellite A60-173 no light power - adapter ok
Hi guys. The A60 were to be driven out by removing the battery. Now it does not start and the power light does not even come. What is a good guess (hope?) does it blow the FUSE on the motherboard? I guess the power light comes almost directly from ta
-
Opening existing documents from my hard drive or e-mail attachments in Word or Excel in is no longer a simple click. Now download small window saying windows cannot open it unless I have it or look for an appropriate program or select a program mysel
-
HP Pavilion E-001AX: "The App is installed on this PC", but it is not installed
I am trying to download the Kindle of Amazon app from the store Windows Windows 8.1 operating system, but when I tried to download, it is said that 'this app is installed on this PC"but his was not, it is said that this application has been installed
-
Error opening Windows Firewall: 0 x 80070005 access denied
I have Windows Vista Ultimate Service Pack 1 installed on my computer. When I opened a Bittorrent client, I receive the following error message "Error opening Windows Firewall: 0 x 80070005 access denied." I've added exception for a specific port 243
-
I have a lenovo G575 computer laptop with windows 7 and a HP wireless optical mouse. Please tell me how to save the settings of the mouse because they are lost when I reboot.