Re: Wireless lack from the Satellite L670D

Similar Questions

• I use the 64-bit drivers for Windows 7 from the Satellite on the Qosmio?

  Hello

  I have 2 laptops Toshiba, Qosmio X 300 - 14U and Satellite T130 - 12 K, and my question is:
  I use the 64-bit drivers for Windows 7 from the Satellite on the Qosmio?

  Thanks in advance

  Hi frakri,

  What drivers tell you exactly? Display, chipset, sound, etc. ?

  Theoretically, it should be possible, but it s according to the material. For example if your Qosmio has the same chipset as satellite you can use these drivers. Otherwise it wouldn't work because the hardware is different.
  First, check the features!

  In addition, you can get all the drivers here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• no noise from the satellite toshiba A505 S6005 speakers

  I have no sound from the speakers on my laptop. It's a toshiba satellite A505 S6005. I watched netflix and my screen turns off but the sound was still playing and after I plugged it in the computer had closed due to lack of autonomy. so after that I turned it back on I tried to watch the movie again, but I got no sound. Ive already covered the sound setting and theyre all very well. any yellow or red exclamation point and the volume is 100% disabled. Thanks for posting if one knows how to fix this problem

  I would try to download the audio driver from Toshiba and reinstall.

  Good luck.

• How to change the Satellite L670D-103 using new SSD 80 GB HARD drive?

  Hello

  I have a Satellite L670D-103 with a 320 GB HARD drive running at 5400 RPM which is too slow for me.

  So I plan to change this factory by a new SSD HDD to increase the performance of the overall system :)

  But as the SSD are expensive, I have only a 80 GB SSD.

  I built the recovery on a USB media and I want to use it to restore my system to the new SSD (I previously did the space needed to ensure that all data can be stored on my new SSD 80 GB space; p)

  Retrieving SSD partitioning new procedure is done without error, but when copying image to restore data to freshly created the partition, one not enough space error stop the process!

  It seems that the recovery procedure is possible on a hard drive that is equal or superior to the original size of the disk (320 gb).

  So, how can I restore mysystem on my new SSD?

  Thank you
  Stéphane.

  > It seems that the recovery procedure is possible on a hard drive that is equal or superior to the original size of the disk (320 gb)

  To my knowledge, you have different recovery options:

  (* 1) * recovery of factory default software

  (a) recovery to out of box state
  (b) recovery without changing the HARD drive partitions
  (c) recovery of a custom size partition

  (* 2) * "erase the HARD drive.

  I think that if you choose factory default software recovery of-> recovery to out of box state then the recovery would create exactly the same size of partition on the new SSD which were available on the 320 GB HARD drive.
  I think this might be the reason why you have received this message.

  Perhaps you need to choose the 3rd option Recovery on a custom size partition

  What do you think?

• Impossible to establish a wireless connection on the Satellite

  Hi all

  I am desperate because I implemented an env wireless in my house, and all my machines work fine except the toshiba one.

  In fact I see the network wireless only in Intel tools, then I click the button connect and get connected a second and the GET disconnected (but wireless is always visible from the laptop.

  Where do you think the problem?
  Router wireless card or the problem is in the toshiba.

  Note that I'm able to make the system operational wireless on another without any problem.

  Thank you for your quick feedback on this issue.
  Best regards.

  Hello

  Not easy to say what could be wrong or what might help.
  You must see this:

  -> try to update the WLan card driver
  -> check the WLan card driver and advanced properties tab more you could disable option economic power.
  -> try to use own windows Wlan connectivity
  -> disable the encryption on the router and try to connect without any security option.

• Card wireless replacement on the Satellite A500D - 11 c

  Hello
  Excuse me for my English.
  I have a Satellite A500d - 11 c and my wireless card is dead.
  I want to know if the wireless card is connected to the motherboard and if I changed?

  If so, how can I do?

  Sincerely,

  Hello

  In the past, I disassembled several Toshiba laptops but not A500. In General, the principle is the same, and you can find the wireless network under the keyboard map. It must be placed enough in the middle. You will recognize easily because the WLAN antenna is connected to the network without WIRE (black wire) card.

  Problem is that the keyboard is fixed with two screws placed at the bottom hidden under the battery.

  If you don t have experience with this sort of thing please don t do anything on your own and ask for professional help.

• Entrance of sessions lack from the Tools menu

  I just upgraded to Firefox 8. The entrance to 'sessions' disappeared from the menu 'tools '. I had about 20 sessions recorded and want them back.

  If this feaature was reemoved since Firefox, can someone tell me where the data can be stored on my haard drive? If I have to, I'll go in the file with a hex editor.

  I just realized that the entry of "sessions" was part of an add-on, Tab Mix Plus, which had been disabled by the update of Firefox. When I enabled it, everything worked well :)

• Sticker license Vista slowly disappears from the Satellite L300D-148

  ... from the back of the laptop. I hope you know what I mean.

  The Vista license sticker on the back of my L300D-148 is due to normal use slowly "vanishing", some letters are not legible more, but the license key itself is still.

  I can remove the sticker by myself to protect it from the damage or what I lose my guarantee that?

  I hope you can help out me.

  Kind regards

  Rantanplan

  Hello

  Of course, you can remove this sticker if you wish. This should not affect the warranty.
  But just note buddy;
  This serial key cannot be used in other Vista operating systems.
  This serial key belongs to the image of Toshiba Vista preinstalled, which belongs to the OEM license.

  Good bye

• Wireless causes to the satellite Pro 6100

  Hi I have a pro 6100 and just recently, I replaced the card WiFi mini PCI card [PA3171U-1MPC] 802. 11 b with PA3236U-1MPC a / b combo. The site Web of Toshiba shows this combo Mini PCI card as being compatible with my model so compability shouldn't be a problem.

  At the same time, when my PC has been upgraded, I also added a Bluetooth PA3121U-3BTM module to my PC.

  Recently, I tried to connect via the wireless link and I could not do. I looked in my device manager and it has not shown that the new PCI Wireless card was recognized while previously it showed that Toshiba Mini PCI Wireless lan.

  I can see now is that--

  Area of personal network Bluetooth Toshiba
  Intel(r) Pro/100 VE Network Connection
  TRP Win Miniport
  GlobalSpan USB ADSL Lan Modem

  Bluetooth

  Bluetooth RFBUS from Toshiba
  Bluetooth RFHID from Toshiba
  Toshiba Bluetooth RFCOMM
  Bluetooth RFBNEP from Toshiba
  I was wondering now that I have Bluetooth maybe causing this conflict?
  Why is the Mini PCI card is not displayed in my device manager or go through what I wrote more high is this normal? The Mini PCI card has been attached by a computer technician and I have no doubt that it has been correctly mounted.
  Thank you

  I think I can solve my problem but I'm not entirely sure.

  I went to the Toshiba site we and downloaded the drivers for the PCI Atheros cards {driver WiFi Atheros 802.11a/b/g with support Cisco/WPA for Windows XP / 2000 (v2.4.2.14, 11/11/2003; 3.72 M)} and now in my list I see Atheros AR5001X Mini PCI Wireless Network Adapter
  I hope it is the right one?

  I can now access the login box for the wireless, which is a promising sign. I can't test it at the moment because I do not have a router at your fingertips right now.

  One last thing, when I press my button FN and F8 it does not bring the message that wireless is enabled. It is used for, but not now.
  Anyone know why this might be?

• Z30-A-1E9 recovery media from the satellite with Windows 10 or Windows 7

  Hi all

  I have a Toshiba Ultrabook (Satellite Z30-A-1E9). It comes with pre-installed 64-bit Windows 8.1 home version. Whenever after a successful recovery process, the cell starts to upgrade the operating system software to Windows 10. It takes a lot of time and focusing on the material of the ultrabook. I'm looking for a recovery with Windows 10 or Windows 7 media. Is it possible to find anywhere or at least create it by myself?

  Thanks a lot for your time!

  Miroslav

  The recovery image Win7 Pro does not work because your laptop is a Win8 Home Edition key.

  You can block the automatic upgrade of Win10.
  Google for "stop Windows 10 to install"

• New HDD on the Satellite L670D-102

  I need to replace the old disk, the cause of my broken laptop. Can someone explain to me how to re - install Windows 7?

  Can someone explain to me how to re - install Windows 7?

  You will need to use either the disc of Windows 7 from Microsoft or you are going to use the Toshiba recovery disc...
  This Toshiba Recovery disk you created in the past?

• Excessive noise is coming from the Satellite P10 804

  Because over the last six months my camera from excessive electrical noise, like a refrigerator / freezer! No idea what this could be and how much it would cost to fix.

  I bought the unit in spring 04.

  I replaced a disk failed a year ago.

  Hello

  It's not easy to say what could be this strange noise?

  I found you another thread here in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=105342&

  It s about the issue of control of volume.
  I don't know but maybe this question Mr has something to do with the electrical noise!

  What do you think?

• Restore the partition from the Satellite Pro A200 recovery

  Hello

  I accidentally deleted the 5 GB recovery partition on my Satellite Pro A200. I have since recovered (and the data inside) and tried to create my discs of recovery using the "Recovery Disc Creator', but it is to say that it cannot find the recovery partition :(

  I tried fishing by the ini files for recovery disc creator find where he seeks the score, but could not find anything...

  One thing I noticed is that now it is recovered, it appears as a NTFS fs (I think that before it was an unknown FS type?) and volume label "HDDRECOVERY".

  Any ideas on how I can either:

  (a) wrong recovery tool by using the recovery partition
  (b) to make the score look exactly as it did before I deleted it, so I can use the tool as it is.

  Would really appreciate any help - want to make these recovery disc for my vista ultimate before I go around whacking backtrack top :) and dicking

  your

  Frank

  Hello

  > accidentally deleted the recovery partition of 5 GB on my Satellite Pro A200. Since I got (and the data inside)
  I wonder how you restored the deleted partition. Perhaps the recovery settings partition are not the same that before and, therefore, the "Recovery Disc Creator' doesn t work properly.

  Unfortunately, I think you will not be able to fool the recovery tool, if the recovery partition cannot be found.
  You can rename only the partition NTFS FS. This can be done in the disk management console.
  But I don t think this will solve this problem.

  It seems that you have to reinstall the whole OS using the CD of restoration of Toshiba or the original CD of Microsoft Vista

  Good bye

• Toll-free indicated what power disconnected from the Satellite L30-134

  I don't know it this the appropriate category, because I'm not sure of the source of the problem.

  Okay, here it is:
  I have Toshiba Satellite L30-134.

  Normally, when I unplug the cable of the AC adapter, 2 things happen:
  1 ATP icon shows that the current generator is the battery, and it shows invoiced % and about working time remaining before the battery is empty.

  2. the power management becomes more energy saving settings, and implementation Hibernate just until the battery is completely down.

  Well... Last few days things have changed:

  Now, when I unplug the power cable, the system does not recognize this and she continues to display: ' course Power Source: AC Power ', for the remaining capacity of the displays: "S/o" and the system is not hibernate, because he does not feel the difference.
  I'm not sure that this has something in common, buy, I found that the UPS SERVICE has been stopped, I tried to start it manually, but there is ERROR 2481: the UPS service is not configured correctly.
  Need help, please :-)
  OS: Windows XP, automatic updates, I did not notice if this happen after installation or any other measure of speciffic, I did...

  > Normally, when I unplug the cable of the AC adapter, 2 things happen:
  > 1. ATP icon shows the current generator is the battery, and it shows invoiced % and about working time remaining before the battery is empty.
  > 2. Power management becomes more energy saving settings, and implementation Hibernate just until the battery is completely.

  This process is correct. After disconnecting the AC adapter the laptop switches to the battery power and uses the Toshiba power saver mode the power created for the use of the battery.

  > Now, when I unplug the power cable, the system does not recognize this and she continues to display: ' course Power Source: AC Power ', for the remaining capacity of the displays: "S/o" and the system is not hibernate, because he does not feel the difference.
  > I don't know he has something in common, buy, I found that the UPS SERVICE has been stopped, I tried to start it manually, but there is ERROR 2481: the UPS service is not configured correctly.

  Well the ups (uninterruptible power supply) service could be responsible for this problem!
  If you are not able to start it manually, then it might be a problem with OS software.
  I studied a bit and found this article in the Microsoft Knowledge base about this problem.

  + Cannot start the UPS Service.
  http://support.Microsoft.com/kb/310437

  Good bye

• poor wireless signal from the router to the new hp pavilion desktop computer

  getting poor signal wireless to the router to the new hp pavilion desktop computer. router 10 feet away. Help!

  Wireless router works fine for the 3 most old cell phones in the office.

  I heard that desktop computers receive wireless signals, but also laptops.  Is there a solution out there for this situation, in that I am?

  Thank you

  Roland

  whatifu wrote:

  A geek at Best Buy told me to open the box and put a few sheets of Tin around the antenna inside. What do you think?

  Roland

  Hello

  Also my suggestion BUT you need to do, of course, don't let touch to the Platinum

  All the best,