RE1000 cannot find the router

Similar Questions

• Satellite T110-11U - cannot find the router WLAN

  Hello

  I have a Toshiba Satellite T110-11U. Have had since February and loved it-fortunately it wireless used throughout the House. Then one day on a month, unless I was in the same room that the wireless router, Wireless does not work. I have 2 other laptops (and iPhone) which still connect wirelessly throughout the House and the garden without problem.
  As you can imagine, it was very strange. When I take in the garden, my other laptops are all networks wireless in the region, but my Toshiba can't find any.

  Suspecting it was a driver problem, I made sure that the wireless drivers are up-to-date. With no joy, I got the system as it was at the time of purchase (do a complete restoration by interupting, starting and leaving the hard drive to be deleted and reinstalled etc.). Still the same problem. I even changed the rooms in which the router is, and the same problem - the Toshiba cannot find the router unless the router is located a few meters from the laptop.

  Until I lose the will to live, can anyone suggest the cause of my problems, or is it time I admitted defeat and brought back to the Comet under warranty (where likely test next to a wireless router and tell me everything is fine!).

  Thank you very much

  Steve.

  Hey Buddy,

  Did you check if the wireless network card is recognized correctly in the Device Manager? There may be a yellow exclamation or unknown device. Try also updating the driver WLAN from Toshiba Web site:
  http://APS2.toshiba-tro.de/WLAN/

  See all other WLAN routers?
  The wireless network card can be activated using a combination of keys FN + F8 and in the BIOS. In the BIOS, you should also load default settings and test again.

• wusb54gcv3 cannot find the router

  My computer is unable to detect the router.  I have the router works on 2 different computer.  I inserted the card and the program provided wouldn't load.  Windows find a driver and installed the adapter.  However, it cannot detect the wireless network.  I just reinstalled XP on a new drive so there is no update. Any help would be appreciated.

  Thanks for your suggestion.  It is difficult to update anything online when you can not get the internet service because you do not find the router.

  However I knew that the problem was with the fact that necessary XP service pack 2 downloaded so that the adapter to work.  Moved to my computer and connected to the direct ADSL line downloaded sp2 then the adapter while traveling.

• Cannot find the routing type 'ECHO' to a mediator

  Hi all
  
  I use SOA Suite 11.1.1.2.0 with a composite SOA designer update.
  I do not see "Echo" when I add a static routing rule...
  
  Thank you
  Jang Vijay Singh

  According to literature Echo is available for the follwing models

  The echo option is supported only with the interfaces of mediator with the following types of WSDL files:

  Request/response

  Request/response/Fault

  Request/reminder

  Note:

  The echo option is not available for the interfaces of Ombudsman with request/response/fault/reminder of the WSDL files.
  The echo option is available for synchronous request/response and request/response/Fault operations.

  Note:

  Echo option is available for synchronous operations only when the rule of routing is sequential because parallel routing rules are not supported for mediators with synchronous operations.
  For synchronous operations, a conditional filter set, the echo does not return a response to the appellant, when the filter condition is set to false. Instead, a response null is returned to the caller.

  Echo option is available for asynchronous operations unless the mediator interface has a callback operation. In this case, the echo is run on a separate thread.

  Note:

  The asynchronous echo option is only available when the routing rule is parallel. To use the option of the echo, then the sequential routing rules are not supported for mediators with asynchronous operations.

  You can use the link follionw for more information

  http://download.Oracle.com/docs/CD/E15523_01/integration.1111/e10224/med_createrr.htm

• C4780 cannot find the wireless router

  I have a new iMac and old Toshiba that is running Windows XP and you use a Netgear wireless router.  When I got to the printer, it worked fine on the wireless network.  Bought a new router that I couldn't work with the Mac and the PC so I returned to my original router.  Now, the printer does not work as a wireless printer.  Summaries of diagnosis indicates that the printer cannot find the wireless router and fails under "Network Name (SSID) Found."  On the Network Setup page, my network is listed as a network discovered by the printer.  I guess there is a simple solution and hope to find the answers here.

  Thank you very much!

  Some printers C4780 left the factory with a default misconfiguration.  This could be the reason why you can not see the hpsetup network.  Here is an updated set of instructions for manually adding the C4780 to a Mac:

  Part 1 - Get the printer in Ad-Hoc Mode Wireless

  (1) turn on the printer.

  (2) display the printer has six keys; three on the left (top-left, middle left, below on the left) and three on the right (top-right, centre-right, bottom-right).  Press and release the following touch buttons in order:

  top left,

  bottom-left,

  top left,

  top left.

  (3) you should see the internal menu of printers.  Press the right button down to select 'Service Menu'.  Press OK (lower-left).

  4) press the lower button right until you see "Reset Menu".  Press OK (lower-left).

  5) press the lower button right until you see "half full".  Press OK (lower-left).

  (6) after a few seconds, the printer turns off.  Press the power button to turn on the printer.  It is now reset with the correct default network settings.

  (7) turn on the radio:

  Press the Scan button to get the wireless settings

  Select wireless Menu

  Select wireless settings

  Select Enable Wireless to turn on the radio.

  Part 2 - run the Wireless Setup Wizard

  The printer has now created an ad - hoc network called hpsetup.  To connect to this network on your Mac.

  Check the connection to the printer by opening the printer's internal web page.  You can do this by opening Safari, select bookmarks then ShowAll bookmarks.  On the left pane of Safari, select Hello and on the right, you should see your printer listed.  Double-click your printer and Safari should display the printer's internal web page.

  The printer Web page, select the network tab, and then select Wireless (802.11).  Now press Start the wizard to launch the wireless configuration wizard.

  When the wizard is finished, your computer unplug the printer's ad - hoc network as the printer reconfigures itself to connect to your network home.

  Reconnect your computer to your home network.  Verify that you can connect to the printer at the opening of its internal web page again once we were doing before.

  Finally, install the printer SW.  Since you have Snow Leopard, you don't need the CD that came with the printer.  Instead, open the Print & Fax under System Preferences applet and press the [+] button.  Highlight your printer and click Add.

• Often, I get the message error "Firefox cannot find the server.

  Often, I get the message error "Firefox cannot find the server. Page normally, refresh the page to load, even if sometimes it takes more than one try.

  I checked my connection settings. IPv6 and DNS prefetching are disabled, according to the recommendations in this article: https://support.mozilla.com/en-US/kb/Firefox%20cannot%20load%20websites%20but%20other%20programs%20can?s=Firefox+can%27t+find+the+server+at & r = 1 & as = s

  See also:

  • http://KB.mozillazine.org/Error_loading_websites
  • https://support.Mozilla.com/kb/error+loading+Web+sites

  You can try to reset (power off / on) of the router.

• Photosmart C4780 installation fails at the "system cannot find the file specified."

  My problem began simply with your printer, a HP Photosmart C4780, who has always had a wireless connection and would not print.  Initially, the checked network connection fine control panel of the printer.  I ran a Microsoft printer troubleshooting, which found a block in line print and authorized.  The first test page print, but did print the "internal test page.  I did not understand what it meant, so I looked for help on the HP site.

  I ran the HP print and Scan Doctorand he suggested I have reinstall the driver.  I have downloaded and saved the current HP (PS_AIO_06_C4700_USW_Full_Win_enu_140_175.exe) and then uninstalled the existing driver.  When I tried to install a new, a window pops up saying "the system cannot find the file specified," with only a single box for click that simply says "OK".  The installation went through 'examining installation options', after entering "check updates, download updates, install updates" and then it was all in "audit system", who jumped out of the window "file not found" upwards, and when I clicked 'OK', the installation window as well as the error message box simply disappeared.  Which I suppose is the path to the file is under the window, but it didn't fit so he showed not the end.  What I read was "C:\Users\... \Local\Temp\7zS588E\Setup\.\Setup\hpzpnp40...»

  I found a topic on the same printer model for the same problem in the forum, which offered this hotfix:

  You must first complete a level 3 of the software uninstallation. I've included the steps below to do this.
  
  1. press the Windows key and the letter R
  2. type %temp%, and then click OK
  3. open the 7z folder (a more recent if there are multiples)
  4 open the util folder
  5 open the folder of the ccc
  6. double-click on the Uninstall_L3
  
  Once you have completed the Uninstall_L3, delete all of the items listed in the temp folder. Note, you will not be able to remove all the elements, please ignore those that do not. Then please empty the trash and perform a clean boot. I've included the document «How to perform a boot in Windows» If your computer does not request it, restart your computer.
  
  Once your computer is back, you must reinstall the printer software. You can do this either by using the Setup CD, or by downloading the software.

  I did what was suggested, until he got to the point where it says it was the case recommend not removing any more items if I had intended on using the HP Officejet printer (Yes, I have a second HP printer connected to the network) anytime in the future.  Not really understand how it all works, I decided to stop what I was doing, so unfortunately it has not solved my problem.

  Do I need to uninstall both printers HP before I can reinstall a?  And if I do that, is there a reason that I wouldn't be able to reinstall the two printers?  Looks like I'm asking trouble.  Bottom line... I can not install the driver.

  I tried to install the full versions and the driver base and still get the same result.

  I have a HP Pavilion dv6 - 3100t for computer laptop, running Windows 7 Edition Premium, version 6.1.7601 family service pack 1 64-bit.  I have not installed new hardware or software.  This printer has always had a wireless connection.  The router I'm using is a Netgear 54Mbps WGR614 v6 (provided by my cable company) and the network includes not only my laptop and the Photosmart printer, but also desktop ASUS, HP printer, an Officejet 6300 series (used only for printing graphics and photos via a wired to the router) and a chip on Vizio TV.  I use Norton 360 first Edition and disabled the antivirus auto-protect when I downloaded and tried to install the driver.

  Help, please!  And thanks in advance for your time and your attention.

  Oh, Jamieson, it worked!  I can print again!  A massive amount of thanks and congratulations to you.

  I couldn't believe it when he actually passed the point where it normally would stop the installation, but then almost at the end, upward jumped «Fatal error during installation»  My excitement sank into a depression.  He said while the installation was not successful and he needed to collect information in order to diagnose the fault.  I looked at what has been collected, and it was more or less gobblety-* beep * for me.  There was a code of 19714722 error condition, if that means anything.

  Then he placed on my desk, the "Error of Installation HP - Windows 7.hta" file and instructed me to do away with the current window, restart, and then open the file and move forward with these guidelines.  I did and he basically had me to restart the computer once again, and then turn the printer off, unplug the printer, then unplug the router, wait 30 seconds and then plug the TAA - DAA and back in, I'm back in the business of printing.

  Thank you very much for your time and patience.

  All the best to you and yours!

• P1102w - cannot find the printer

  Hello

  I'm unable to print using a wireless connection.

  the printer is p1102w.

  operating system is MAC OS 10.10 Yosemite

  Whenever I try to print something I get "printer is not connected / cannot find the printer" message.

  I tried the solutions on your support site, but nothing helped.

  For sure, printer is connected to the same network as the computer. I see it on the print configuration page and I can connect to its IP address via a web browser (but I can't use web services).

  All software and drivers are up to date. Update Apple is nothing new to me. Niether have your site.

  I tried to move the printer closer and further away from router. No results.

  No web proxy is related to my network.

  To make this work, I have to remove the printer from my system, reinstall it using the USB cable, and then add it again via wi - fi.

  But some time the problem reappears.

  It's really frustrating. Help, please.

  Hi @xopot ,

  I see that you have problems printing via wireless network. I would like to help you today.

  Since you can access the printer embedded Web server, the printer would have a valid IP address. Most likely, it has something to do with the software that the printer uses.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  

  

  Configure a static IP address for the printer.

  The printer is not found during Installation wireless.

  Do not take into account the title. Select the Solution 4: assign your printer a static IP address.

  If you need help, let me know.

  Have a great day!
  Thank you.

• Cannot find the printer HP Deskjet 3055 has wireless

  Hi bought this printer and went through the set up disc. The printer is connected and has the right signal to our home network and the laptop also connects wirelessley to the internet just fine. The laptop cannot find the printer - I tried all the suggestions and put the IP address for internet search and it will not. I can't understand. Also tried to install on the MAC laptop and still only goes up to now and then are unable to communicate with each other. Please can I have some advice.

  Oh, wait a minute--I just got it working by stopping laptop, printer and disconnect the wireless router and all start back them up again. Then to try to make it work on the MAC laptop - what this space! Thanks for the help.

• Cannot find the WSDL service defined for the name of the service

  Hello! I made that call on the other composite via MDS on a single instance. Everything works fine. I've deployed this composite 2 to another instance, updated MDS. And I got error in the composite test 1st 2nd call. You have an idea? Thank you.
  

  
  

  EM error

  
  

  " < bpelFault > < faultType > 0 < / faultType > < remoteFault xmlns =" http://schemas.Oracle.com/BPEL/extension "> < part name ="detail"> < could not find the service WSDL defined for the name of the retail service > {http://xmlns.oracle.com/EnterpriseServices/Core/ShipmentAdvice/V1}. CreateShipmentAdviceService. Please make sure that the port attribute to the binding defined in the composite file is correct by checking the service name and namespace in the element #wsdl.endpoint. Also, check that the WSDL file for binding namespace is imported and is currently accessible (check import at the top of the composite file nodes). Finally, to validate the parameters of HTTP proxy for the server. < / details > < / part > < a name = "summary" part > < summary > oracle.fabric.common.FabricInvocationException: could not find the service WSDL defined for the service name {http://xmlns.oracle.com/EnterpriseServices/Core/ShipmentAdvice/V1} CreateShipmentAdviceService. Please make sure that the port attribute to the binding defined in the composite file is correct by checking the service name and namespace in the element #wsdl.endpoint. Also, check that the WSDL file for binding namespace is imported and is currently accessible (check import at the top of the composite file nodes). Finally, to validate the parameters of HTTP proxy for the server. < Summary / > < / part > < part name = "code" > < null code > < / code > < / piece > < / remoteFault > < / bpelFault >

  
  

  SOA-server - diagnostoc.log

  
  

  Handle error message.

  error while trying to process the message 'com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessage '; the reported exception is: block cannot handle the exception.

  failure of the block 'BpPrc0' to handle an exception of business for instance '350026'; reported exception is: faultName: {{http://schemas.oracle.com/bpel/extension} remoteFault}

  messageType: {{http://schemas.oracle.com/bpel/extension} RuntimeFaultMessage}

  parts: {}

  detail = < detail > cannot find the WSDL service defined for the service name {http://xmlns.oracle.com/EnterpriseServices/Core/ShipmentAdvice/V1} CreateShipmentAdviceService.  Please make sure that the port attribute to the binding defined in the composite file is correct by checking the service name and namespace in the element #wsdl.endpoint. Also, check that the WSDL file for binding namespace is imported and is currently accessible (check import at the top of the composite file nodes). Finally, to validate the parameters of HTTP proxy for the server. < / details >

  , summary = < summary > oracle.fabric.common.FabricInvocationException: could not find the service WSDL defined for the service name {http://xmlns.oracle.com/EnterpriseServices/Core/ShipmentAdvice/V1} CreateShipmentAdviceService.  Please make sure that the port attribute to the binding defined in the composite file is correct by checking the service name and namespace in the element #wsdl.endpoint. Also, check that the WSDL file for binding namespace is imported and is currently accessible (check import at the top of the composite file nodes). Finally, to validate the parameters of HTTP proxy for the server. < / Summary >

  code = < code > < code > null}

  This error exceptions thrown by the underlying routing system.

  Contact Oracle Support Services.  Provide the error message, the composite source and the trace of the exception in the log (logging level value debug mode) files.

  This error was an exception that is thrown by the message handler.

  Check the trace for the exception in the log (the connection value level debug mode).

  ORABPEL-05002

  Handle error message.

  error while trying to process the message 'com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessage '; the reported exception is: block cannot handle the exception.

  failure of the block 'BpPrc0' to handle an exception of business for instance '350026'; reported exception is: faultName: {{http://schemas.oracle.com/bpel/extension} remoteFault}

  messageType: {{http://schemas.oracle.com/bpel/extension} RuntimeFaultMessage}

  parts: {}

  detail = < detail > cannot find the WSDL service defined for the service name {http://xmlns.oracle.com/EnterpriseServices/Core/ShipmentAdvice/V1} CreateShipmentAdviceService.  Please make sure that the port attribute to the binding defined in the composite file is correct by checking the service name and namespace in the element #wsdl.endpoint. Also, check that the WSDL file for binding namespace is imported and is currently accessible (check import at the top of the composite file nodes). Finally, to validate the parameters of HTTP proxy for the server. < / details >

  , summary = < summary > oracle.fabric.common.FabricInvocationException: could not find the service WSDL defined for the service name {http://xmlns.oracle.com/EnterpriseServices/Core/ShipmentAdvice/V1} CreateShipmentAdviceService.  Please make sure that the port attribute to the binding defined in the composite file is correct by checking the service name and namespace in the element #wsdl.endpoint. Also, check that the WSDL file for binding namespace is imported and is currently accessible (check import at the top of the composite file nodes). Finally, to validate the parameters of HTTP proxy for the server. < / Summary >

  code = < code > < code > null}

  This error exceptions thrown by the underlying routing system.

  Contact Oracle Support Services.  Provide the error message, the composite source and the trace of the exception in the log (logging level value debug mode) files.

  This error was an exception that is thrown by the message handler.

  Check the trace for the exception in the log (the connection value level debug mode).

  at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:238)

  at com.collaxa.cube.engine.dispatch.BaseDispatchTask.process(BaseDispatchTask.java:89)

  at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTask.java:65)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:897)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:919)

  to com.collaxa.cube.engine.dispatch.Dispatcher$ ContextCapturingThreadFactory$ 2.run(Dispatcher.java:933)

  at java.lang.Thread.run(Thread.java:738)

  ]]

  Hello

  In the em console, against you call composite (I meant first composite), could you click on the "Show XML definition" (right next to the ' Show WSDL and endpoint URI) and see if correct endpoint URI is set up for the 2nd composite?

• Cannot find the printer on the wireless network

  My new 6500 a 710n-z printer copier copies very well.  Also, it detects the wireless network and is given an address 169.254.182.35.  I have reset the router several times using the WPS button.  But after I installed the software on my netbook ACER Windows XP, the computer cannot find the printer.  I spent three days trying to get the $% # ^ & * to work.  I see in some documents to get a 169.254. IP address, so I'm probably not connected?  But what to do?

  Well Yes, a 169.254 IP address... is auto-assignée when he can't get one from the router.  The WPS button does not reset the router.

  Do this on the printer: Setup > network > Wireless Setup Wizard. Follow the instructions.

• I tried all these steps and still no progress, cannot update or restore my phone. When you try to restore an error appears saying 'cannot find the phone (9).

  I tried all these steps and still no progress, cannot update or restore my phone. When you try to restore an error appears saying 'cannot find the phone (9).

  We do not know what are the following steps, because you have not provided their. Support this article has suggestions for your specific error code.

  If you see errors 9, 4005, 4013, 4014, when you restore your device iOS - Apple Support or

• Cannot find the seetings camera

  Cannot find the camera settings in firefox os smartphone

  Hi sanatankumarsahu,

  What settings to configure for your Firefox OS device camera?

  There is no specific menu of camera settings, but depending on your device and the version, you can choose another camera, turn flash power or reset the focus.

  Please reply to this message with your Firefox OS as well the version and the Build ID device model so that we can give you a definitive answer.

  Thank you

  -Ralph

• Cannot find the function edit that was on my old computer and firefox. When you click the Firefox icon, you can collect the text that has been deleted.

  Cannot find the function edit that was on my old computer and firefox. When you click the Firefox icon you can extract the text that was deleted by accident.

  Hello, you can press the alt key to display the menu bar with the Edit menu temporarily. or you can press ctrl + z which is the shortcut for "undo"...

• Message "Safari cannot find the server.

  In all these days, I get a message 'Safari cannot find the server' on a regular basis despite the fact that I'm connected to the internet and the server is a real server, such as Google or other sites that I use all the time.

  Is there something funky past with Safari that it would suddenly start happening?

  1 disable Proxies if selected.

  System Preferences > network > advanced > proxies tab

  Unlock the lock if you have to.

  Under 'Select the Protocol', uncheck if checked.

  Click 'OK' and then 'apply '.

  2. If this does not help, run EtreCheck and post the report here.

  http://etresoft.com/etrecheck

  Download, open the download folder, click on it to open it and select "Open" in the dialog box to execute.

  Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste it when replying.