RE6500: no connection after the router main stop or restart (WPA related?)

Similar Questions

• Satellite M40X-169 when it is connected to the wireless device stop with restarts and blue screen

  Hello.

  I had the problem with my laptop when I connect and get connected to the wireless network. My laptop stops with the Blue error screen, then restarts.

  Maybe you can help me solve this problem, because I can't work normally when I need to be connected.

  Plaese help me.

  Hello

  It is not easy to give you a precise answer, but try to remove WLAN card from Device Manager, and then restart the device. You can also check the Toshiba download page and try to install the latest driver for the WLAN card.

• Unable to connect to the router (even after reset)

  I'm really frustrated, and I hope that this community can provide an answer. After all the hype around this router, it is he who gave me the most trouble.

  About a month and a half... completely randomly it seems to me, I could not connect to the router more. Not through intellectual property, routerlogin.net/com...nothing. It just says: cannot display the page. I did everything I could possibly think, tried all of the suggestions I could find here and elsewhere and still nothing would work.

  I finally did a hard reset and obviously lost all my settings... and RIGHT AFTER the hard reset after upgrading the firmware, I can't connect to the router again. This could be the cause? Is there a way around it?

  The router worked fine until about a month and half ago. Then I stopped being able to connect to the admin page. Several resets hard did nothing.

  I ended up RMA'ing it and the new replacement works fine (for now).

• My laptop lost wireless connection after hibernation I or stop it. Then I have to reset the automatic Wireless Configuration to find my wireless connection

  I just bought a new NetGear wireless router and now my laptop lost wireless connection after hibernation I or stop it.  Then I have to reset the automatic Wireless Configuration to find my wireless connection.  Whenever I stopped him it and I have to choose.  This does not happen on another laptop or desktop that I have.  Is there a safe solution for this?

  Hi Ron,

  1 Windows operating system you are using?

  2. you receive messages or error codes?

  You can read the following article and check.

  Windows wireless and wired network connection problems

  If you use Windows XP, then read the following article:

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  This problem can also occur when the power management profile turns off your network card.

  You can try the following steps and check if it helps.

  a. click Start, type device manager in start search and press ENTER.

  (b) in Device Manager, expand network adapter.

  c. now you will see your network adapter or adapters if you have more than one. Right-click on the network component, and then click Properties.

  d. go to the power management tab.

  e. ensure that all check boxes are unchecked (check boxallow the computer to turn off this device to save power is off).

  f. If you have disabled the boxes, click ok and restart your system. Put the computer in Hibernate mode and check if you still have any questions.

• my wifi stopped working suddenly. It shows no available networks. However, another iphone is able to connect to the router. Help, please

  my wifi stopped working suddenly. It shows no available networks. However, another iphone is able to connect to the router. Help, please

  Hello

  1 have you made changes to your computer recently?

  2 are you able to access the Internet through an Ethernet cable?

  I suggest you to follow the steps in the link and check if it helps.

  Windows wireless and wired network connection problems

  I hope this helps.

• EA6500 unable to connect to the router after Time Machine

  Just got an EA6500 - updated to the latest firmware available.

  I have attached 2 x WD NAS and 1 x WD through the USB port of the device.

  Each time after I finished running Time Machine on the MacBookPro (written to one of the WD NAS), I can no more connection to the router as neither the local IP, or the cisco connect cloud. The error message I get (loosely formulated) is: unable to connect to the router. Please ensure that the router is connected to the internet.

  At this point, all the devices connected to the router (wired and wireless) still can access Internet perfectly. Only the console of the router is therefore more accessible.

  Anyone else have the issue?

  Any ideas on how to solve it?

  Contact support for Cisco and the person advised me to do a factory reset (even if the router is new with no customization!). Regardless, it now works correctly. Cisco Cloud Connect works always before, during, and after a Time Machine.

  "When in doubt, try to turn the grid and the.

• Try to connect to the wireless computer after freshly installed Windows says I am connected to the router, but I have no internet access

  Original title: connection problem

  Hello! I recently did a clean installation of Windows 7 Professional 64 bit and I use a wireless USB adapter. Windows says I am connected to the router, but I have no internet access, and I have this yellow on trinagle. Work of all my other Windows 7 PCs, but this one. Could someone help me? Thank you!

  Hello

  Welcome to the community forums of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue. I see that you are unable to connect to the wireless network after you perform a new installation.

  I suggest you to consult the steps described in the article:

  Method 1:

  You can try the steps in the link and check.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  You can update the driver of windows 7 on the manufacturer's Web site.

  Method 2:

  
  You can remove and re-create the wireless network connection, follow these steps:

  a. Click Start, type ncpa.cpl , and then press on Enter.
  b. right click on your wireless network connection and then click Properties.
  c. click the wireless networks tab.
  d. under preferred networks, click your Wireless
  network and then click on remove. e. click on view Wireless networks.
  f. under management of the network, click refresh the network list.
  g. under Choose a wireless network, click the wireless network to which you want to connect, and then click Connect.
  
  Method 3:
   
  
  If the steps above don't you can uninstall and reinstall the NIC drivers and check with the question.

  a. click on Start menu, in the Search tab type devmgmt.msc and press ENTER.

  b. right click on network adapters and click Uninstall and restart the computer.

  c. after rebooting, install network cards and check with the question.

  
  Method 4:
  
  You can temporarily disable the antivirus and firewall on the computer and see if it helps:
  Enable or disable Windows Firewall
  
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  NOTE: Turn off Windows Firewall might make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
  You can see the following link to disable the Antivirus installed on your computer software.
   
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  Please follow these recommended steps and post if you still experience the problem. I'd be happy to help you further.

• Printers HP B110a cannot communicate with the laptop, but both will be connected to the router?

  OK, here's an interesting problem that has been banging my brain for hours, one of my friends has a HP Photosmart all in one printer B110a. Now I can get the printer to connect to the wireless router, no problem. Can I also have the phone to connect to the router, the problem is that the printer cannot communicate with the laptop. The router brand and model is the Linksys wrt54g

  Now, I took my friends laptop home and tried to see if she could detect my wireless printer model different on my router which is a TP WR340GD I went in devices and printers, and went to Add a printer and Add Printer wireless, it instantly detected my printer via the wireless network. There is no problem on the side of the laptop. I am sure that any firewall on the laptop was turned off when I tried the connected printer.

  So now I have my friends printer here with me and decided to try and see if I could detect the HP Photosmart printer All In One Printer on my laptop on my TP WR340GDwireless router. Yet once, it worked perfectly and it has detected the printer and works wireless without fault.

  I'm down now to the conclusion that the problem is with my friends router Linksys wrt54g I'm gone in the settings of the router, change the wireless channels, changed security between WEP and WPA/WPA2 and AES AND TKIP wireless and this does not solve the problem.

  I can access to the Photosmart B110a: the Web server integrated in a browser ONLY if I have the laptop to the router physically connected by Ethernet cable when trying to access my router from a friend, but I can access through wireless on my router. The problem is probably something very simple that I forgot, but I was more all I can think that I tried to reset harder than the printer cleaned the network settings on the printer as well from the display of the printer menu.

  I'm really lost now, someone at - it suggestions?

  Hey pcwizard, ok, I checked the router settings and Mac filtering turned on, so I decided to reset the router, it restored to factory settings. Re-Setup wireless and once again I tried, still had no luck with the laptop to communicate with the printer.

  in any case, I decided to connect the cable from the printer to the laptop and took the USB to wireless Assistant. As I reinstalled it the printer using the wired method.

  He told me that the rules of traffic incoming and outgoing firewall stopped communication between devices and assign port numbers 427-9000 etc.. However, I had turned off all firewall, Windows and Norton 360, which since then, I've replaced with a better anti-virus software.

  I went into the settings of the router, port forwarded the application numbers, tried again and is again no luck. I'm usually pretty good with computers, but it was really annoying me. So I went and had a coffee and a brainwave came and I decided to see if my laptop could detect and connect the printer to the router. As soon as I tried it, he finds and the printer has detected immediately.

  Then I thought there must be something on my laptop to friends who may be at the origin of the problem, when I looked, I noticed that my friend had the old software Vodafone Mobile Broadband running in the background which was connected to the router.

  So I closed and turn it off and tried again adding printer. SUCCESS now detects it and the printer is now communicate and respond with the laptop. I'm guessing that the Vodafone Mobile Broadband have a built-in firewall blocking the communication. However it is strange because it worked without problem on my printer at home, so I wonder if some how blacklisted broadband Vodafone IP address of the printer at a time on their router.

  I'm so happy, it's finally done, a lot of hours and work, and after all this time it was * beep * Vodafone.

  in any case Pcwizard I thank very much for trying to help, no doubt has given me a few ideas.

  Thanks again!

• Printer Hp6700: unable to connect to the router wireless D - Link DI-514 when SSID Broadcast is set to no.

  HP6700 printer: unable to connect to the router wireless D - Link DI-514 when the router Broadcast SSID is set to no. My MAC laptop and HP laptop both work with the set SSID on no. If I change the router Wireless SSID Broadcast is YES, then the printer HP6700 can connect to the wireless router. I set up the printer it saying that the SSID and password have been, the same as both of my laptops, but it connects ever, unless I have change the router to broadcast the SSID. Help!

  Have you tried to update the firmware on the DI-514?

  You can also try to set a static IP address on the printer, and then assign the printer to the list of DHCP static in the interface of the router.
  To give a static IP address to your printer:
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.
  Now, stop the router and printer, start the router, wait, and then start printing.

  After that you remove and re - add the printer to your Mac.

  Show support by clicking on the blue Kudos star in the post that solved your problem. Doing so will help the other members of the forum their solutions also.

• Windows 7 Dell computer laptop connects to the router, but the internet connection is spotty/slow

  I recently installed a new Comcast wireless gateway, which includes a built-in router.  My Ipod and Ipad work perfectly with this new router connection.  My Dell laptop, however, connects to the router without a problem, but it surfing the internet very slowly and sometimes can't access it at all.  The router connection remains strong during these periods of power failure, however.  I don't get online no problem when I connect directly to the router/modem with an Ethernet cable.  Network troubleshooting does not detect a problem, I have released/updated my IP address, and made sure I had updated drivers.  The issue still [persists.  Any input on what to try next?

  Hello Scot,

  Thanks for posting your question in the Microsoft Community forums.

  The description of the problem, I see that the Internet connection is very slow on the computer.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  Maybe there's a chance that some network settings, start services application or a third party or a security software restricted it to connect properly and is responsible for the internet connection is slow.

  I suggest you to follow the steps below and see if it helps.

  Method 1

  I suggest you try the procedure described in the following Microsoft Article and check if it helps.

  Internet Explorer is slow? 5 things to try
  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Method 2

  If the problem persists, I suggest you to follow the steps described in the following Microsoft tutorial and see if it helps.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Why is my Internet connection so slow?

  http://Windows.Microsoft.com/en-us/Windows/why-Internet-connection-slow#why-Internet-connection-slow=Windows-7

  Method 3

  If after performing more high question method persist, try to perform the clean boot and temporarily disable security software and then check the speed of the Internet.

  Step 1: Perform the clean boot

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to reset the computer to start as usual after a repair.

  Step 2: Temporarily disable security software.

  Disable the antivirus 

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  Method 4

  Since then, the issue is not resolved by disabling the security software, Windows Firewall could be the next possibility. So, I suggest, temporarily, disable the Windows Firewall and check if the problem persists.

  Refer to the following steps:

  1. Press the Windows key + R, type firewall.cpl , and press ENTER.
  2. Click turn Windows Firewall on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Click turn off (not recommended) Windows Firewall under each network location that you want to stop trying to protect, and then click OK.

  Caution:

  You should not turn off Windows Firewall unless you have another firewall is enabled. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers. You must reactivate as soon as you have completed troubleshooting.

  For more details, you can see the article mentioned below.

  Enable or disable Windows Firewall

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Wan interrupts the connection after the firmware update

  Looks like the latest firmware upgrade is the source of the problems.

  I've just updated my timecapsule 1 TB of first generation version 7.6.7 and my 3 TB timecapsule new version 7.7.7

  Both are connected to the router of the provider of Internet services and extend the network even in my house.

  WiFi is stable until the upgrade, but now the connection is lost every few minutes or seconds.

  Both versions are later to the respective timecapsules.

  I end up having to downgrade if no solution is found.

  I powered the two market still nothing does not. Redefine the network and tried both hidden and not hidden, yet once nothing doesn't.

  Any ideas on what is causing the problem?

  Well, since nobody seems to have an explanation, and Apple are not out with firmware update after 7.7.7 and 7.6.7 I decided to downgrade the firmware to the previous version. I now run version 7.7.3 on the new 3 Tb Time Capsule and 7.6.3 on the 1st Gen Time Capsule. So far, the network is stable. Using WiFi Explorer Ii see that they use channel 6 and 8 respectively. Signal is strong and no dropouts have taken place so far. Hope the issue is resolved in the next firmware update.

  As I read in another post: firmware update does not solve a problem, you didn't. However, it can create a problem that you didn't.

• I want to thank my wifi in another part of the House with an Airport Extreme. But I want to not be connected to the modem main via ethernet cable is it possible?

  I want to thank my wifi in another part of the House with an Airport Extreme. But I want to not be connected to the modem main via ethernet cable is it possible?

  I put in place already to extend the wifi of my modem still connected to the modem via ethernet cable.

  Now I want to be considered on the floor and use it to extend the wifi without ethernet cable

  The AirPort Extreme can extend only wireless signal from another router from Apple, so if you want to take the AirPort Extreme on the floor and extend wireless signal, you will need another airport connected to your modem by Ethernet cable router to produce the wireless signal that will extend the extreme on the floor.

  Another way of saying the same thing would be to say that if you want to extend wireless using a router from Apple, you'll need two of them do... because AirPort Extreme is not compatible with a third-party modem or modem/router for this purpose.

• HP Envy 4500: Printer connected to the router, but will not print wireless Macbook

  I want my wireless printer to work on my macbook, but I can't. I tried setting up on the HP utility to connect with the router as the mac and printer on but it does not work! It indicates that the download was successful, but the device was not reachable. I don't really know where to go from here and any help would be really appreciated. Thank you.

  Hey @miriamnimmo,

  Welcome to the Forums of HP, I would be happy to help you! I understand that you have the printer set up on your network, but the software says that the device is not accessible. Sometimes the IPv6 may interfere with the connection, and I suggest we disable that before anything else. On the fornt of the printer Panel, scroll down to and then select Wireless. In the wireless Menu, select Advanced settings, then IPv6 and.

  Now we are going to let the router and unplug the power cable (NOTE: do not reset the router), then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  Please let me know if this solves the problem by marking your post as solved (click on Accept as Solution button below). If the problem persists, let me know, I'll watch for your reply.

  See you soon!

• iMac connects to the router of Linkysys WRT1900ac

  I am trying to help a friend get his iMac 12.1, that is running 10.11.4, to connect to a new Linksys WRT1900ac router.  The router is a novelty in this House, is in the same room of 10 x 12, as the computers listed below, and the installer was using the Linksys recommends the method, which is to let the Linksys to make adjustments.

  Here are its configuration;

  The router is connected to a cable modem, ISP and the following devices are connected to the router and works well;

  Via ethernet

  Windows 10 PC

  AT & T cell phone extender

  Ooma VOIP

  Wireless

  iPhone

  iPad

  Notebook PC

  While troubleshooting my MacBook 5.1 also allows to connect without problems to the Linksys router.

  Note that her iMac connects without problem to the wifi network Netgear Guest unprotected from its neighbor.  I also installed in his room my 1st generation Airport Express, which has added a second wifi network but without access to the internet and his iMac connect without problems to this wifi.

  Here are the steps I took to try to solve this problem, and they were unsuccessful;

  ➔ Scanned for malware/adware with Malwarebytes and found nothing.

  ➔ Ransacked after the files in/Library/Preferences/SystemConfiguration and restarted

  com Apple.Airport.Preferences.plist
  NetworkInterfaces.plist
  Preferences.plist

  ➔ When the previous did not work I trashed all the files in the folder/Library/Preferences/SystemConfiguration except "com.apple.boot.plist', which would not remove and rebooted

  ➔ Created a second user account and still not able to connect to the Linksys router

  ➔ Repaired permissions

  ➔ Created a new location in System Preferences > network and added the OpenDNS addresses and in the material value MTU 1453

  ➔ restarted in safe mode and not still could not connect

  Firmware on the router Checked ➔, which is updated

  ➔ Reset SMC

  ➔ reinstalled El Capitan via the App Store

  That's all I could think about.  I'm puzzled.

  I checked the router and everything seems ok, but I'm no expert.  There may be something I'm not contagious.  I have seen that he has no MAC filtering set up in the router, so this isn't everything.

  Please tell me if there is something that I'm on.  Is there something in the router, that I need to change?  There are other files in the Mac, I need to delete?  Is there any other troubleshooting steps I can take to identify this problem.

  Any help would be appreciated as it is a total mystery to me.

  There are a lot of variables, but start with some basic info. So on her iMac, if you click the wifi at the top right, you can see his router listed?

• M40X connects to the router Netgear DG834G wireless

  Message on the toolbar and warnings are; No limited connectivity or. Improved Intel Pro wireless 2200BG driver worm 9.0.4.8 without success.
  I have another laptop with a USB wireless network too and that works very well.
  I was able to connect to the router via the ethernet card.
  Been on Netgear, and the router works well.
  Any ideas, anyone please...

  Hello

  I guess that your laptop uses the map Intel 2200BG wireless.
  You will find a lot of questions and problems with this card intel.
  Mainly the graphics driver update will solve these issues.
  You can also check the power save mode settings in the properties of the wireless card. Go to the Device Manager, choose the wireless card and go to properties. In the second Advanced tab you should find the Power save mode option. Please switch off (off)

  I put t know where you download the driver, but you must use the latest version on the Intel site.