Reach target FIFO in the event structure will not achieve

Similar Questions

• Structure of the event in the event structure

  Is it possible that I can have a structure of the event, which is in another structure of the event? When I run the code, I can't use other buttons. (See chart for details)

  

  Do not put the event structures in the structures of the event! There is never any reason to do so.

  Redefine architecture your code in a correct state machine.

  (By default, events lock the façade until the event ends and if you raise the event internal or external, first of all, the other event can never fire because the current event can never accomplish or is inaccessible by data stream.)

• structure of the event recorded does not change value

  I have a VI that communicates with an FPGA via a telnet interface.  I have several Boolean controls on the front panel.  When you click a control, it sends a write command on the face i in telnet to the FPGA.  Similarly, if a process in the FPGA himself wrote the same registry (that control written when I clicked on it), an order is generated in the FPGA and returned to the VI and the control (via a local variable) lights or unlights accordingly (based on value).  In other words, these controls are read-write...

  It's all workers, except for one important thing.  I have the code that runs through a structure of event whenever the value of the control changes.  I can see that this code executes in fact when I click on the control via the front panel.  HOWEVER - when something is generated in the FPGA finally changes the value of the control, the structure of the event does not, even if I see the value of the change of control on my front.

  A specific example, I have a control named CLIENT_LB.  When I click on CLIENT_LB, I see it lights up, and I see the event structure code run.  Now, if I have the FPGA process to set CLIENT_LB to 0, I see unlight on my front, but does not run the code structure of the event.  I have probes in place who have checked the associated local variable CLIENT_LB evolving impact of values.  The structure of the event reads: 'CLIENT_LB': value change.

  Shouldn't an event structure "value change" run when the value changes, regardless of whether if it happened manually (i.e. me by clicking on the control) or automatically (i.e. the FPGA written in VI and changes the value of the control)?

  The VI is great, and you would not be able to test it in any case unrelated to the material, to remedy that I've attached 2 screenshots, I have described below.

  1. This is where the string from the FPGA analysis occurs.  The chain between the sub - VI, and then the data chain part is hidden to determine if the Boolean value of the control is true or false.  I put a probe on CLIENT_LB, and I see that as the FPGA changes the value of the register, CLIENT_LB passes from false to true as a result.  I checked this several times.

  2. it is the structure of the event.  This code runs when I click on CLIENT_LB on my face, but does not run when the peak CLIENT_LB #1 local variable is changed.

  Writing to variables never fires events to "change the value. If writing should raise this event, use the property "Value (follow the signs).

  Norbert

• Structure of the event - controlled motor not variable

  I have a state machine that includes certain structures of the event. These event structures are used to control stepper motors using an Arduino Mega microcontroller. I'm using labview in 2012.

  The entrance to one of the events is the variable "pour the entry. I want to use it to control the motor speed and direction.

  If I control the motor as shown in the attached image Working.jpg, then the motor functions correctly. If I fix the motor to the steps variable # then the engine moves at the speed set in the right direction depending on whether the entry "pour" is positive or negative.

  However, I want to control the speed of the engine, not the number of steps, with the variable "pay Input". I checked that the values read by the indicator image INPUT_VALUE works do not are of the same order as the specified values, working, by using the "Set Speed". When I connect the value of the entry to the spindle speed of the motors of the Arduino (not_working.jpg) icon, the engine is running, apparently indefinitely at maximum speed. I don't understand why there is a difference in motor behavior between the value provided by these two methods at the entrance to the speed of the motor. I am confused by the present and don't know where to go from here.

  The structure of the event somehow behaves differently when taking a value from outside the structure to this data inside? or y at - it something to do with the opening of the structure on its first loop?

  I have also attached my vi together, even though she may not be the easiest to follow and requires an arduino Mega to run.

  Carlr wrote:

  I have a state machine that includes certain structures of the event. These event structures are used to control stepper motors using an Arduino Mega microcontroller. I'm using labview in 2012.

  The entrance to one of the events is the variable "pour the entry. I want to use it to control the motor speed and direction.

  If I control the motor as shown in the attached image Working.jpg, then the motor functions correctly. If I fix the motor to the steps variable # then the engine moves at the speed set in the right direction depending on whether the entry "pour" is positive or negative.

  However, I want to control the speed of the engine, not the number of steps, with the variable "pay Input". I checked that the values read by the indicator image INPUT_VALUE works do not are of the same order as the specified values, working, by using the "Set Speed". When I connect the value of the entry to the spindle speed of the motors of the Arduino (not_working.jpg) icon, the engine is running, apparently indefinitely at maximum speed. I don't understand why there is a difference in motor behavior between the value provided by these two methods at the entrance to the speed of the motor. I am confused by the present and don't know where to go from here.

  The structure of the event somehow behaves differently when taking a value from outside the structure to this data inside? or y at - it something to do with the opening of the structure on its first loop?

  I have also attached my vi together, even though she may not be the easiest to follow and requires an arduino Mega to run.

  You have a very inappropriate design of "state machine" - even if you do not have same event in more than one of your structures of the event (in addition to time-out), looks that get some of your treatment to go forward until you get something very specific (and in which none of your other user events are being processed).

  I strongly suggest that first set you design of State machine - perhaps follow producer/consumer Design Pattern (events) rather than having everything in a loop, the way you have.  If you keep everything in a loop, you should consider redesign so that you at least allow events to deal with rather than stay in a loop for an indefinite period!

  In any case, in the case where work, you send variable "Set Speed (steps per second)" for engines step by step write vi.  But otherwise, you're feeding 'Entry for' value - are they the same? And to let you know, you send only command "write" step by step when the input value to be paid.

  It's a big mess!  For starters, look at the attached picture, get rid of your structure of the event that has "for the entry" and replace it with what I showed in the picture. (In fact, all your event structures can / must be replaced with a similar logic.) Does not need the event structure in all this, you're just more complicated it must be!

  -DP

  

• Record event blocks LabVIEW if the event Type is not selected.

  Hi I think that found a possible bug in LV2011 SP1.

  -Thread a property node of event Reg on the dynamic event record Terminal of a structure of event

  -Add a case to the event

  -Click on the dynamic event

  -LV accidents

  The source code included, try adding the unspecified event and look like LV breaks down.

  BR,

  / Roger

  Hi Roger,

  I doubt it. If you first select the event in the node property and then add the event to the event, you do not get an accident (I don't have at least let me know if you do). However, if boring and annoying is when it happens, there is a simple solution to the problem, which probably means that it will not be fixed on the previous version.

  Johan BR

• DAQmx error: DAQmx Every N samples transferred the event buffer is not d support channel types

  Hello

  Trying to get my new ni9263 below is the steps:

  DAQmxErrChk (DAQmxCreateTask("",&taskHandle));
  DAQmxErrChk (DAQmxCreateAOVoltageChan(taskHandle,"Dev1/ao0","",-10,10,DAQmx_Val_Volts,)); NOR-USB 9263
  DAQmxErrChk (DAQmxCfgSampClkTiming (taskHandle,"" SAMPLE_RATE, DAQmx_Val_Rising, DAQmx_Val_ContSamps, SAMPLE_SIZE));

  DAQmxErrChk (DAQmxCfgOutputBuffer (taskHandle, OUTPUT_BUFFER_SIZE));

  DAQmxErrChk (DAQmxRegisterDoneEvent(taskHandle,0,DoneCallback,));

  DAQmxErrChk (DAQmxRegisterEveryNSamplesEvent (taskHandle, DAQmx_Val_Transferred_From_Buffer, EVERY_N_SAMPLES, 0, EveryNSamplesCallbackAO, NULL));
  DAQmxSetWriteRegenMode (taskHandle, DAQmx_Val_DoNotAllowRegen);

  Then I do my writing code and start the task

  When I move my code in my application hangs when it comes to DAQmxRegisterEveryNSamplesEvent with the following error

  DAQmx error: DAQmx Every N samples transferred the event buffer is not d support channel types

  Status code :-200980

  Any idea?

  Greetings;

  When you're talking about an alternative, do you mean a sleeve of spare or chassis or an alternative in the code?

  If it's a matter of code, then you probably need to change your software architecture to adapt the capacity of the installation. In order to avoid to use the FIFO and so have the problem you are experiencing, you avoid needing to register for this event? A few examples on different architectures is on the following link:

  http://www.NI.com/white-paper/6999/en

  Kind regards

  Simon Perez

• Cases of event structure do not work (probably façade is disabled

  Please find the attached VI, I tried the update feature and inlcude a new code. And it ends in a non-responsive event structure.

  Is this a bug (related to the definition of property of "Windows run in a transparent manner") or am I missing something...?

  You have your events to lock the front until full.  If you have a keydown event, the structure of the event 2nd he also captures and locks the front panel.  You might think that you have a timeout, but this loop does not receive the value of timeout until the first so that the loop ends.  Your second loop depends on the completion of the first loop.

  If you do not hit the combination just with a keydown event (or leave of mouse or mouse enter and other events that would lock the front) which causes also this first loop to stop.  You have locked your program.

  As Mike said, have 2 structures of event on a diagram when you do not understand how to work the event structures.

  I recommend reading warnings and recommendations when using events in LabVIEW.    This document has a little more items that I think should be mentioned.  But it's a good start.

• Photosmart Premium C309-g: the drivers and the printer software will not be installed.

  My network all-in-one Photosmart Premium C309-g worked very well on my desk until recently, when suddenly the HP software could still see and connect to the printer, but Windows 10 could not. I tried to remove the printer and uninstall all associated software, then tried to reinstall the software. Unfortunately, the installation will not get to the point where it starts and then suddenly disappears with no trace of her still running in the background. I can deviate from the default installation and bring to the top of the page to select the components that I want to install, but when I do the button 'ok' on this page does not work. No matter how many times I click on it, the page remains open and the installation will not so fast. If I click Cancel on this page, it disappears and the installation back to the previous page, where I can choose to continue and happen almost immediately out of sight again. This happens whenever I try to install selected software and drivers. I deleted the printer from the devices page in the Panel, I made sure to this it is not is more listed in the Manager of peripheral devices (printers and imaging devices), I removed the Windows 10 print queue and I deleted all the data of the folder under the Program Files (x 86) HP folder on my hard drive. I also disabled Windows Defender and run the installer as administrator, yet none of these steps help the process at all. I have never, in my 20 + years using nothing other than printers HP, encountered a problem like this. I'm used to receive error messages during the installation of software to fail, but I have never had a process simply disappear from the computer without leaving any trace of never having run. I hope that someone out there has an idea, that I have not thought yet, transferring files to my tablet to print from becomes a pain in the rear.

  A man who took the freedom of another man is a prisoner of hatred, he is locked behind bars of prejudices and narrow-mindedness. I am not truly free if I take freedom away from someone else, as surely as I am not free when my freedom is taken from me. The oppressed and the oppressor similar are stripped of their humanity.
  ~ Nelson Mandela

  Welcome to the HP Forums @GarfieldFan1969,

  I understand the printing software will not fully installed for your Photosmart C309 on your system Windows 10, and I wanted to answer with my suggestions for trying to help! Here are my suggestions for you to try. When you are finished, please let me know the results and problems or errors that you may encounter!

  First step: clean boot, restart the PC and try the install again.

  1. start by typing "msconfig" in the search box of Cortana, and then click MSConfig (run command)
  On your keyboard press Windows + R key at same time and type Msconfig in the run window, and then click OK or press ENTER.

  2. now, choose Selective startup

  3. Remove the check of the Load Startup items

  4. click on the Services tab

  5. check "hide all Microsoft Services" and then click on disable all

  6. click apply , then OK

  7 restart the PC and temporarily disable firewalls or antivirus programs

  8 run the Installation Wizard for Windows HP printer to install the printer

  9 turn on the firewall and start services

  Second step: you unregister and re-register the Windows Installer Service:

  1. hold down the Windows key + R to fill the box "Run" and type cmd.exe, and then click OK.
  2. at the command prompt, type msiexec /Unregister , and then press ENTER.
  3. at the command prompt, type msiexec/regserver, and then press ENTER.
  4. at the command prompt, type exit and press ENTER to close the command prompt.
  5. run the Wizard for Windows HP printer installation

  Step 3: run System File Checker Scan (up to 3 times) to repair the corrupted system files:
  1. go to start
  2. type CMD
  3 right-click and run as administrator
  4. to check and repair the OS type sfc/scannow (note the space between sfc and ' / ')

  You may need to run this upward to 3 times to solve all the problems

  When finished, it will say one of three things
  Windows did not find any breach of integrity (a good thing)
  Windows resource protection found corrupt files and repair the (good)
  Windows resource protection found corrupt files but was unable to fix some (or all) of them (not a good thing)

  Try to reinstall the printer.

  Step 4: activate the built-in Windows administrator account

  source

  1. first of all, you'll need to open an administrator mode command prompt by right-clicking and choosing "run as Administrator" (or use the shortcut Ctrl + Shift + Enter in the search box).

  Note that it works the same in all versions of Windows. It just search for cmd and then do a right-click on the icon of the command prompt in the start menu or the boot screen.

  

  2. If you are in Windows 8.x or 10 you can click on the Start button and choose to open a command prompt in this way.

  

  3. now type the following command:

  NET user administrator / Active: Yes

  

  4. you should see a message that the command completed successfully. Log out, and you will now see the administrator as a choice account.

  (Note that this screenshot is for Vista, but it works on Windows 7 and Windows 8 and Windows 10)

  

  You will notice that there is no password for this account, so if you want to leave it enabled, you must change the password.

  Try to reinstall the printer.

  

  Testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

• Since a windows 10 update on 09/12/15 my lightroom app will does not start I tried signing and return in, restart, reload the application, it will not start either from the desktop or the app cloud have other people encountered this problem?

  Since a windows 10 update on 09/12/15 my lightroom app will does not start I tried signing and return in, restart, reload the application, it will not start either from the desktop or the app cloud have other people encountered this problem?

  Hi rogerk94701487,

  Could you please check the event viewer and let me know the path of the defective Module once.

  How to check the event viewer: Photoshop CC 2015 crashing very frequently

  Kind regards

  Tanuj

• The page content will not be displayed in IE 7 & 8

  I'm going to understand problems why content after the Spry Menu will not display in IE 8, and the page appears at all in IE 7. Seems

  http://nowagenewmedia.com/Organica/

  CSS

  * {
  vertical-align: baseline;
  Police-weight: inherit;
  do-family: inherit;
  font style: inherit;
  do-size: 100%;
  border: 0 none;
  outline: 0;
  padding: 0;
  margin: 0;
  }
  {#outerWrapper}
  Width: 960px;
  margin-top: 10px;
  margin-right: auto;
  left margin: auto;
  border: 3px solid #CCC;
  }
  {#contentWrapper}
  Width: 100%;
  overflow: auto;
  Clear: both;
  }
  #header {}
  Width: 960px;
  height: 160px;
  }
  #sidebar {}
  float: left;
  Width: 225px;
  height: 400px;
  background-color: #FFF;
  border-left-width: 1px;
  border-left-style: solid;
  border-left-color: #CCC;
  }
  #content {}
  float: left;
  Width: 734px;
  background-color: #FFF;
  }
  {#navbar}
  float: left;
  height: 35px;
  Width: 960px;
  Clear: both;
  }

  Page

  < ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""
  " < html xmlns =" http://www.w3.org/1999/xhtml ">
  < head >
  < meta http-equiv = "Content-Type" content = text/html"; Charset = UTF-8 "/ >"
  < title > Untitled Document < /title >
  < link hand. CSS"rel ="stylesheet"type =" text/css"/ >
  "< link href="Spry-UI-1.7/css/Menu/basic/SpryMenuBasic.css "rel ="stylesheet"type =" text/css"/ >
  "< script src="Spry-UI-1.7/includes/SpryDOMUtils.js "type =" text/javascript"> < / script >
  "< script src="Spry-UI-1.7/includes/SpryDOMEffects.js "type =" text/javascript"> < / script >
  "< script src="Spry-UI-1.7/includes/SpryWidget.js "type =" text/javascript"> < / script >
  "< script src="Spry-UI-1.7/includes/SpryMenu.js "type =" text/javascript"> < / script >
  "< script src="Spry-UI-1.7/includes/plugins/MenuBar2/SpryMenuBarKeyNavigationPlugin.js "type =" text/javascript"> < / script >
  "< script src="Spry-UI-1.7/includes/plugins/MenuBar2/SpryMenuBarIEWorkaroundsPlugin.js "type =" text/javascript"> < / script >
  < style type = "text/css" >
  / * BeginOAWidget_Instance_2141544: #MenuBar * /.
  / * Values for skinning a basic through presets menu. If the default settings are not sufficient, most count should be done in
  These rules, except for the images used to down or to the right pointing arrows, located in the SpryMenuBasic.css file
  
  They take the following classes of widget for layout of menu (located in a "Preset")
  . MenuBar - applies to all menu bars - default is a horizontal bar, all submenus are vertical - level 2 subs and beyond are drop down to the right.
  . MenuBarVertical - vertical main bar; All submenus are drop down to the right.
  
  You can also pass in extra classnames to set your desired top-level menu bar layout. Normally, they are defined by using a predefined setting.
  They apply only to the horizontal menu bars:
  MenuBarLeftShrink - the menu bar will be horizontally "shrinkwrapped" be just big enough to hold his items and left-aligned
  MenuBarRightShrink - as MenuBarLeftShrink, but right-aligned
  MenuBarFixedLeft - set to a specified width defined in rule "." MenuBarFixedLeft', and left-aligned.
  MenuBarFixedCentered - Fixed to a specified width defined in rule "." MenuBarFixedCentered',.
  and centered in its parent container.
  MenuBarFullwidth - expands to fill the width of the parent container.
  
  In general, all the rules specified in this file are prefixed by #MenuBar so that they don't apply to instances of the widget inserted along
  with the rules. This allows use of multiple MenuBarBasic widgets on the same page with different layouts. Due to limitations in IE6.
  There are a few rules where this was not possible. These rules are so noted in the comments.
  
  */

  {#MenuBar}
  background-color: #003300;
  do-family: "Lucida Sans Unicode", "Lucida Grande", without serif. / * Specify the fonts on the bar menu and submenu MenuItemContainer, so MenuItemContainer.
  MenuItem and MenuItemLabel
  at a given level all use the same definition for ems.
  Note that this means that the size is also inherited from the submenus of the child,
  so be careful when using other than relative sizes
  100% on the fonts submenu. */
  make-weight: bold;
  font size: 13px;
  make-style: normal;
  padding: 0;
  }
  / * ATTENTION: because ID + class selectors do not work correctly in IE6, but we want to restrict these rules to all this
  instance of widget, we used the concatenated string classnames to our selectors for the type of layout of the menu bar
  in this section. These have very low specificity, so be careful not to overstep accidentally. */

  . MenuBar br {/ * using only a class, so there same specificity that the "."} MenuBarFixedCentered br' rule bleow * /.
  display: none;
  }
  . {MenuBarLeftShrink}
  float: left; / * shrink the content, but also to float the menu bar * /.
  Width: auto;
  }
  . {MenuBarRightShrink}
  float: right; / * shrink the content, but also to float the menu bar * /.
  Width: auto;
  }
  . {MenuBarFixedLeft}
  float: left;
  Width: 100%;
  }
  . {MenuBarFixedCentered}
  float: none;
  Width: 100%;
  margin-left: auto;
  margin-right: auto;
  }
  . MenuBarFixedCentered br {}
  Clear: both;
  Display: block;
  }
  . MenuBarFixedCentered. Submenu br {}
  display: none;
  }
  . {MenuBarFullwidth}
  float: left;
  Width: 100%;
  }

  / * Top level bar small objects - these actually apply to all items and get substituted for the submenus level 1st or successive * /.
  #MenuBar. {MenuItemContainer}
  padding: 0px 0px 0px 0px;
  margin: 0;
  / * Zero margin on the containers of items. The MenuItem is the active area of hover.
  For most elements, we have padding top or bottom or border only on MenuItem
  or a child so we keep all tiled submenu with elements.
  Definition of this 0 avoids the "dead zones" to hover. */
  }
  #MenuBar. {}, MenuItem
  padding: 0px 10px 0px 10px;
  background-color: transparent;
  border-left: 1px solid #FFF;
  border-top-width: 0px;
  border-right-width: 0px;
  border-bottom-width: 0px;
  border-top-style: none;
  border-right-style: none;
  border-bottom-style: none;
  }
  #MenuBar. {MenuItemFirst}
  border-style: none none no none;
  }
  #MenuBar. {MenuItemLast}
  border-style: solid none none none;
  }

  #MenuBar. MenuItem. {MenuItemLabel}
  text-align: left;
  line-height: 1.4em;
  color: #ffffff;
  background-color: transparent;
  Padding: 6px 6px 15px 15px;
  Width: 10em;
  Width: auto;
  }
  . SpryIsIE6 #MenuBar. MenuItem. {MenuItemLabel}
  Width: 1em; / * Equivalent to min-width in modern browsers * /.
  }

  / * First level of submenu items * /.
  #MenuBar. Submenu. {}, MenuItem
  do-family: Arial, Helvetica, without serif.
  make-weight: bold;
  do-size: 12px;
  make-style: normal;
  background-color: transparent;
  padding: 0px 2px 0px 0px;
  border-width: 1px;
  border color: #cccccc #cccccc #cccccc #cccccc.
  / * Border styles are replaced by first and last items * /.
  border-style: solid solid no solid;
  }
  #MenuBar. Submenu. {MenuItemFirst}
  border-style: solid solid no solid;
  }
  #MenuBar. Submenu. MenuItemFirst. {MenuItemLabel}
  padding-top: 6px;
  }
  #MenuBar. Submenu. {MenuItemLast}
  border-style: solid solid solid solid;
  }
  #MenuBar. Submenu. MenuItemLast. {MenuItemLabel}
  padding-bottom: 6px;
  }
  #MenuBar. Submenu. MenuItem. {MenuItemLabel}
  text-align: left;
  line-height: 1em;
  background-color: transparent;
  color: #ffffff;
  padding: 5px 6px 6px 12px;
  Width: 7th;
  
  }

  / * Hover States for containers, objects and labels * /.
  #MenuBar. {MenuItemHover}
  background-color: transparent;
  border color: #cccccc #cccccc #cccccc #cccccc.
  }

  #MenuBar. MenuItemWithSubMenu.MenuItemHover. {MenuItemLabel}
  background-color: transparent; / * expose this propeller separately * /.
  color: #999999;
  }
  #MenuBar. MenuItemHover. {MenuItemLabel}
  background-color: transparent;
  color: #999999;
  }
  #MenuBar. Submenu. {MenuItemHover}
  background-color: #003300;
  border color: #cccccc #cccccc #cccccc #cccccc.
  }

  #MenuBar. Submenu. MenuItemHover. {MenuItemLabel}
  background-color: transparent;
  color: #999999;
  }
  / * The submenu - first-level submenus properties * /.
  #MenuBar. {SubMenuVisible}
  background-color: #003300;
  min-width: 0%;  / * This prevents the menu being lean that the parent MenuItemContainer - but not available on ie6 nice to have * /.
  border-color: #ffffff #ffffff #ffffff #ffffff.
  border-width: 0px;
  border-style: none none no none;
  }
  #MenuBar.MenuBar. SubMenuVisible {/ * menu bar horizontally for only * /}
  top: 100%;    / * 100% is at the bottom of menuItemContainer parent * /.
  left: 0px; / * "left" may need tuning according to borders or padding applied to the bar MenuItemContainer or MenuItem,.
  and your personal taste.
  0px align left drop-down list with the content of the MenuItemContainer area. Assuming you keep the margins 0
  on MenuItemContainer and on the parent MenuItem
  menu bar, which in fact equals the sum of padding-left MenuItemContainer & MenuItem align
  the drop-down menu to the left of the menu item label.*.
  z-index: 10;
  }
  #MenuBar.MenuBarVertical. {SubMenuVisible}
  Top: 0px;
  left: 100%;
  min-width: 0px; / * Do not neeed to match the width of the parent MenuItemContainer - elements will avoid total collapse * /.
  }
  / * The sous-menu--deuxieme submenu level properties and beyond - are visible to descendants. MenuLevel1 * /.
  #MenuBar. MenuLevel1. {SubMenuVisible}
  background-color: #003300;
  min-width: 0px; / * Do not neeed to match the width of the parent MenuItemContainer - elements will avoid total collapse * /.
  Top: 0px;    / * If you want, you can move this down a smidge to separate the top item "submenu s of menubar.
  It is really necessary only for the submenu on the first point of MenuLevel1, or you can make it negative to make the submenu
  vertically 'centered' about his call to * /.
  left: 100%; / * If you want to move the submenu on the left to partially cover the point of his call, you can add a margin to the left with a
  negative value to this rule. Alternatively, if you use the elements of fixed width, you can change this value on the left
  to use px or ems to get the desired offset. */
  }
  / * IE6 rules - you can remove these if you do not want to support IE6 * /.

  / * Note about several classes in IE6.
  Some rules above use several class names to an element of selection, such as "hover" (MenuItemHover) and 'a a submenu' (MenuItemWithSubMenu).
  * give the selector '. MenuItemWithSubMenu.MenuItemHover'.
  * Unfortunately, IE6 does not support using mutiple classnames in a selector for an element. For a selector like '. foo.bar.baz', IE6 does not take into account
  * all but the final classname (here, ".baz") and defines the specificity in consequence, with only one of these classs as significant. To work around this problem
  * problem, we use the plugin in SpryMenuBarIEWorkaroundsPlugin.js to generate classnames for IE6, such as "MenuItemWithSubMenuHover".
  * Given that many of these necessary, the plugin does not generate additional classes for modern browsers, and we use the copies of CSS2 style class
  * syntax for that. Since IE6, both apply the rules where the
  * It should not and gets the specificity wrong too, we have rules of order carefully, then misapplied rule in IE6 can be overridden.
  * So we put first the multiple class rule. IE6 wrongly apply this rule.  We follow this with the single class rule that it would be
  * replace by mistake, by ensuring that the specificity of IE6 interpreted as is the same as the unique class selector, so the latter wins.
  * We then create a copy of the rule of multiple class, adding a "." SpryIsIE6' in the context of the class and to ensure that the specificity
  * the selector is high enough to beat the rule of single class in the case of "match of these two classes. We place the rule of IE6 at the end of the
  * block of css styling to make it easy to remove if you want to drop support for IE6.
  * If you decide you do not need IE6 support, you can get rid of these, as well as the inclusion of the SpryMenuBarIEWorkaroundsPlugin.js script.
  * The 'SpryIsIE6' class is placed on the HTML element by the script in SpryMenuBarIEWorkaroundsPlugin.js if the browser is Internet Explorer 6. This avoids the need of IE conditional comments to these rules.
  */
  . SpryIsIE6 #MenuBar. MenuBarView. MenuItemWithSubMenuHover. MenuItemLabel / * selector IE6 * /}
  background-color: transparent; / * expose this propeller separately * /.
  color: #999999;
  }
  . SpryIsIE6 #MenuBar. MenuBarView. Submenu. MenuItemWithSubMenuHover. MenuItemLabel / * selector IE6 * /}
  background-color: transparent; / * expose this propeller separately * /.
  color: #999999;
  }
  . SpryIsIE6 #MenuBar. Submenu. Submenu / * selector IE6 * /}
  left margin:-0px; / * Offset at least part of a version of 'double upholstery' bug IE6 'double margin "* /.
  }

  
  / * EndOAWidget_Instance_2141544 * /.
  < / style >
  < script type = "text/xml" >
  <!--
  < oa:widgets >
  < oa:widget wid = binding "2141544" = "#MenuBar" / >
  < / oa:widgets >
  ->
  < /script >
  < / head >

  < body bgcolor = "#17321A" >
  < div id = "outerWrapper" >
  < div id = "header" > < img src = "media/header.jpg" width = "960" height = "160" alt = "organica title" / > < / div > "
  < div id = "navbar" >
  < ul id = "Menu bar" >
  < li > < a href = "#" > home < /a > < /li >
  < li > < a href = "#" > Organica kitchen < /a >
  < ul >
  < li > < a href = "#" > Menus < /a > < /li >
  < li > < a href = "#" > Catering < /a > < /li >
  < /ul >
  < li > < a href = "#" > Bar juice < /a > < /li >
  < li > < a href = "#" > produce < /a > < /li >
  < li > < a href = "#" > grocery store < /a > < /li >
  < li > < a href = "#" > < /a > < /li > body care
  < li > < a href = "#" > events < /a > < /li >
  < li > < a href = "#" > Contact < /a > < /li >
  < ul >
  < li > < a href = "#" > Directions < /a > < /li >
  < li > < a href = "#" > job < /a > < /li >
  < /ul >
  
  < script type = "text/javascript" >
  BeginOAWidget_Instance_2141544: #MenuBar
  var MenuBar = new Spry.Widget.MenuBar2 ("#MenuBar", {}
  widgetID: "Menu bar",
  widgetClass: 'MenuBarFullwidth the menu bar. "
  insertMenuBarBreak: true,
  mainMenuShowDelay: 100,.
  mainMenuHideDelay: 200,.
  subMenuShowDelay: 200,.
  subMenuHideDelay: 200
  });
  EndOAWidget_Instance_2141544
  < /script >
  < / div >
  < div id = "contentWrapper" >
  < div id = "sidebar" > < / div >
  < div id = "content" > < / div >
  < / div >
  < / div >
  < / body >
  < / html >

  You have some tags not closed in the html code. Here's what your code should look like the openingtag to the closingtag. It's a good idea to 'comment' where your

  end of tags. In the code, you will see that I did this like:
  . Some people like to put "comment" inside the closing like tag: If you move it then
  the comment goes with it.
  
   

  

  
   

  
   

  
       
  • Homepage
  
  
  • Organica food
    
    
    
    • Menus
  
  
• Restoration



• Juice bar


• Produce a


• Grocery


• Care of the body
• Events


• Contact


• Directions


• Job




       
   

   
Sidebar

   
Content

 




• The event gateway asynchronous not multithreaded?

  Hello
  I stumbled upon a huge problem, and I would appreciate your help, otherwise I'm looking at a major overhaul of my application: S
  
  I thought that any event gateway (asynchronous) would be multi-threaded? in other words, multiple users can call the event gateway at the same time and it would be just the fire the event gateway threads and parallel processing of the EFA happen?
  
  However, this isn't what happens in my application. My gateway to events is called from a Web page and it calculates (very complicated and time-consuming data) data and creates a file with a unique file name. However, if more then 1 user submits a job at the same time, it takes the first task, it ends and then begins to work on the next task in the queue. So if there are 5 users submitting their jobs one after the other, the event gateway will take their jobs one by one which is very bad for me.
  
  Is it possible to have the event gateway to work on several tasks at the same time? or is it just not possible?
  
  I would greatly appreciate your response. Thank you
  
  using Coldfusion MX 7, WINXP

  Check the ColdFusion Administrator settings page: event gateways-> Settings.

  The number of threads that service configurable events here. The default value is 10 threads for the company, but if you use the Developer edition, then you are locked 1. The CF standard does not support the event gateways.

• Why the iPhone 6plus will not open photos app on mac pro for IOS 10 update.

  Why the iPhone 6plus will not open photos app on mac pro for IOS 10 update.
  A message appears on the iphone asks you to trust the computer it is attached (mac pro 10.10.5)

  You type 'Confidence' and nothing happens. the photos on mac app publishes this message.

  This Mac not yet have been granted access to the media on 'my iPhone '. To import media to this Mac, press 'Trust' on 'my iPhone '. You must first unlock the device.

  This actually solved for me after going to settings, General, reset, reset the location and privacy... and then plug in the unit and pressing the trust... hope that works for others.

• Firefox shows upwards on the taskbar but will not maximize when clicking on window

  I tried re installation, but when I click the icon it will appear on the taskbar but will not maximize.

  It is a more detailed explanation of the above.

  Sometimes, a window is "off the screen" somehow. Often, you can force it to appear on the screen by right clicking on the thumbnail image just above the taskbar and choose expand. Does it work?

  A possible cause for this is that the file that stores the positions and sizes of window is corrupt.

  #1 method: If you can get a zoomed window:

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Leave this window open, switch back to Firefox and output, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Pause while Firefox finishing its cleanup, then rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

  Launch Firefox back up again. Windows normally appear again?

  #2 method: If you can not get a Firefox window for all:

  Close Firefox by right clicking the icon in the taskbar > close all windows.

  Using the Run dialog box (windows key + R) or the search for the start bar menu (or Windows 8.1 may bar charms bar research?) type or paste the following and press ENTER to drill down to the profiles folder:

  %APPDATA%\Mozilla\Firefox\Profiles
  

  Here you can see a folder - in this case, double-click that - or more than one case - in this case, double-click on in what looks like the most recently updated.

  Scroll down and rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

  Launch Firefox back up again. Windows normally appear again?

• Fire fox is slow and on a single website, it goes on the site but will not load the page

  Fire fox is slow. Also on a single Fire fox web site goes on the website but will not load the page
  Questions began Tuesday, June 16, 14. Website can be opened with other browsers.
  I am running windows XP sp2

  Start Firefox in Safe Mode {web link}
  While you are in safe mode;
  Press < Alt > or < F10 > to display the toolbar.
  Followed;

  Windows; Tools > Options
  Linux; Edit > Preferences
  Mac; name of the application > Preferences

  Then Advanced > General.
  Find and stop using hardware acceleration.

  Dig safe web sites and see if there is still a problem. Then restart

• I have the latest version of FF and the latest version of Roboform... everything has worked perfectly until an hour ago... now the Robofrom toolbar will not work... its

  I have the latest version of FF and the latest version of Roboform... everything has worked perfectly until an hour ago... now the Robofrom toolbar will not work... says not compatible... it is activated in Add ons... nothing has been put to day or changedf suddenly just no toolbar and it will not tie

  RoboForm will probably have an update for Firefox 30 when Firefox 30 is actually out, if not sooner. No need to turn off the automatic updates now.