Reactive layouts: publish multiple Sites with conditional Builds and which connect

I hope that someone can provide a simple solution to publish problems I've had with adapted presentations when you try to publish several sites with conditional builds. Essentially, I want to be able to have an index page that links to one of the two variants of the published sites that I called 'General' and 'specific '. When I click on the 'general' link I want to not open the site which was published with a conditional for all these subjects compilation labeled as 'general' and when I click on the 'link' want it to open the site which was published using a conditional version for 'specific '.

Here are the steps I took to create sites and can't seem to get to bind correctly:

Table of contents, topic Creation and tagging content

  1. Creates a Table of contents.
  2. Added 2 topics in the Table of contents. The first topic, I called "general" and the second issue I called, 'specific '.
  3. I then click with the right button on the "general" and selected subject Tag to build conditional apply. From there, I've created a new tag called "General".
  4. I repeated this process to create the specific tag, but do a right-click on the 'specific' theme and the creation of a new tag called "specific".

Layouts reactive and edited the sites based on the conditional tags

  1. Created sensitive presentation using the standard layout and content generated without any conditional builds.
  2. Duplicated sensitive put in page and gave him the content of 'general' then it is generated using the conditional, "General" version If the finished publication published content has shown that the 'general' subject, as expected.
  3. I then repeated the same process for the specific content and content using the version parole, generated 'specific '. When over content published showed that the subject marked as 'specific' as expected.

Added an Index page to the table of contents

  1. Created a new topic to serve as the launch page.
  2. Added a 'general' hyperlink called for the launch of the general "theme found in the general publishes from the resource manager.
  3. Added a hyperlink called 'specific' to the launch of the general "theme found in the specific issues from the resource manager.
  4. I then republish the sensitive standard layout site.

From this point, it gets stuck and won't open properly published Web sites. I don't know why it won't launch hyperlinks correctly. Is there something I'm missing? Let me know if you do not want to see my files. I will be gladly their.

OK, thanks a lot for the capture screen. They help more than you realize.

So here's one of the biggest mistakes I think that you have done so far. You use the resource manager to link to published results. If it is technically possible to do, I'm pretty sure Adobe never planned for it to be used this way.

It may help to think in terms of creation of food products. I have long considered as RoboHelp to be very much like working in my kitchen. All consumables (heading text in the headings, images, HTML pages, etc.) are just as raw ingredients. (Eggs, milk, flour, etc.). The places of storage (hard drive) it's like the pantry and the fridge. And RoboHelp provides facilities to easily combine ingredients to create the different recipes.

This next bit will be somewhat exaggerated, but bear with me. Maybe you have one or more neighbors and all you want to share some common "ingredients". If you set the things where each of you have access to a wine cellar and a shared refrigerator. Maybe you do a Dutch sauce killer. You create it and place in the refrigerator, then your other participants have access through the common "fridge". This is exactly what the resource manager is intended to help.

Now assume that you create something like cookies chocolate chip and you keep in the refrigerator. Well, that's fine, but you don't want to use cookies to chocolate chip already baked in a recipe that might call for cookie dough. But that's what happens when you take an exit and place in a place intended for raw ingredients. And you will see the strange behavior. Prepare for these cookies chemically changes them so that cookies already are significantly different from the dough used to create them. Similarly, you don't want to take one or more output files and reuse in a project source.

So in your case, you run an index file and that fires events to produce the output. All should be well. But when you click on the links to open topics, topics are intended to show up more in the right panel. Think of the picture of how works of image on a TV. The moment that link you to something intended to fill the screen, he is forced into this smaller area on the right. If you end up with what you see in the last picture.

I suggest the following steps.

First, REMOVE your resource manager exits.

REMOVE all links that can point here.

Output records where people will consume copy your projects. (The web server)

Then figure either the parent (.. /.. / somefolder/somefile.htm) path to other systems or the absolute path (http://www.whatever.com) and to link the projects in this way.

Sorry, but without seeing the installation of first hand, it is difficult to say what should be these paths.

I hope this was helpful... Rick

Tags: Adobe

Similar Questions

  • Problem with Web Builder and MySQL connection

    Hello

    I created a web service VI (see picture attached) to connect my Web Builder application with a MySQL database. The problem is that I get nothing on my exit signs during the call to the web service VI.

    Some tests I've done:

    (1) this web service VI works perfectly (I mean indicators 'value', 'status' and 'data_hora' give the desired result) when the VI run directly through LabVIEW. MySQL connection and my VI are OK...

    (2) I know my web service VI was successfully built and deployed because the indicators give me some value if I sign something for them other than my SQL output

    (for example: if I put a string constant "Hello" on indicator "valor" I get "Hello" when calling the web service VI)

    I suppose that the database connectivity kit is not supported when a VI is integrated with a web service VI. In my case, kit screws are inside the subVIs 'start', 'exec 2d' and 'stop' showed in the picture as an attachment.

    Any idea?

    Thank you

    Marcelo

    I'm using LabVIEW 2001 Wesley, but I solved my problem.

    It was just a MySQL data source problem: I just had to add my info DB through C:\Windows\SysWOW64\odbcad32.exe.

    Thank you

    Marcelo

  • I published my site to Business Catalyst and purchased and installation by area, but the site can be seen only with the help of a search engine. The site is visible when I type the url address, but can't find a search engine

    I published my site to Business Catalyst and purchased and installation by area, but the site can be seen only with the help of a search engine. The site is seen when I type the url address, but can not find with search engines.

    Hello

    I suggest you sign upward to Google Webmaster tools (free) and check your site (directions are in the webmaster tools) and

    also consider joining Google analytic (also free).  Analytical will allow you to 'see' who is visiting your site and how they experience through research, order the seizure of the URL, or through the links, etc.  Also from where they come, how much per day, etc.  Lots of good information.

    In addition, through this document by google

    Check the performance of your site - webmaster help search

    Let me know if you have any question.

  • I created a site of Muse for a customer who wishes to host with Business Catalyst. How to publish the site with their account instead of using one of my free sites?

    I created a site of Muse for a customer who wishes to host with Business Catalyst. How to publish the site with their account instead of using one of my free sites? This is so I can keep my ones that are free for personal projects but also so they can pay for their own accommodation. I'm happy to put everything to them but don't know what to do.

    Hello

    You can use their IDs of BC and use them, which to publish the site will be under their account.

    Please change the login of BC's Edit > preferences > Publish > switch accounts, for Mac, there Adobe Muse > preferences

    Thank you

    Sanjit

  • How can I do the following to happen: Browse multiple sites at once, simply and easily. Each new site appears as a new tab.

    A tab open, when I click on a bookmark, the browser IS NOT open it in a new tab. It open in the same tab, replacing the old site.

       In FEATURES it says:

    «Browse multiple sites at once, simply and easily.» Each new site appears as a new tab.

       I wish it would.

    Install one or both of these modules.

    In addition, see How to set the home page which explains how to open several sites such as your homepage.

  • publish the site with muse to the temp site but then Business Catalyst replaces with Coming Soon site. How d

    Hello. I'll try to repeat my steps to find the problem:

    I create a new site from scratch on BusinessCatalyst so I can choose the package with the blog and e-commerce.

    I then create the Muse website and publish it on the field that I created when I created the new site in Business Catalyst.

    I add a few modules to my concept of the Muse and publish.

    Everything works for a while, but then the Muse published site is replaced with chart of Business Catalyst-default 'Coming Soon'.

    How can I stop this from happening?

    Thank you!

    In this case, you need to assign the page as 'start page' in the admin. of your site

    http://bloomingarden.BusinessCatalyst.com/

    Manager of-> pages web site

    I did it for you.

  • Cisco VPN Site to Site with a static and dynamic does not

    Hello

    I have ASA 5510 in Headquarters with static, IP and ASA 5505 in the remote site behind ADSL router trying to establish VPN, but its failure in phase 1

    Config of the headquarters

    interface Ethernet0/0

    Description link to router LeaseLine

    nameif outside

    security-level 0

    IP x.x.x.x 255.255.255.248

    !

    interface Ethernet0/1

    Description link to LAN internal

    nameif inside

    security-level 100

    IP 172.17.1.15 255.255.255.0

    access extensive list ip 172.17.1.0 inside_nat0_outbound_1 allow 255.255.255.0 172.20.1.0 255.255.255.0

    access extensive list ip 172.17.1.0 inside_nat0_outbound_1 allow 255.255.255.0 172.19.1.0 255.255.255.0

    access extensive list ip 172.17.1.0 vpn_to_remote allow 255.255.255.0 172.19.1.0 255.255.255.0

    extended VPN ip 172.17.1.0 access list allow 255.255.255.0 172.20.1.0 255.255.255.0

    Global 1 interface (outside)

    NAT (inside) 0-list of access inside_nat0_outbound_1

    NAT (inside) 1 0.0.0.0 0.0.0.0

    Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1

    Crypto ipsec transform-set esp-aes-256-md5 esp-aes-256 esp-md5-hmac

    Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

    correspondence address 1 crypto dynamic-map cisco VPN

    Crypto dynamic-map cisco 1 set of transformation-ESP-AES-256-SHA

    card crypto outside_map 10 correspondence address vpn_to_remote

    card crypto outside_map 10 set pfs

    card crypto outside_map 10 peers set y.y.y.y

    card crypto outside_map 10 transform-set esp-aes-256-md5

    outside_map crypto 10 card value reverse-road

    dynamic outside_map 30-isakmp ipsec crypto map Cisco

    outside_map interface card crypto outside

    crypto isakmp identity address

    crypto ISAKMP allow outside

    crypto ISAKMP policy 10

    preshared authentication

    aes-256 encryption

    md5 hash

    Group 5

    life 86400

    crypto ISAKMP policy 20

    preshared authentication

    aes encryption

    md5 hash

    Group 2

    life 86400

    crypto ISAKMP policy 30

    preshared authentication

    aes-256 encryption

    sha hash

    Group 2

    life 86400

    Crypto isakmp nat-traversal 20

    tunnel-group y.y.y.y type ipsec-l2l

    tunnel-group ipsec-attributes y.y.y.y

    pre-shared-key *.

    tunnel-group parkplace type ipsec-l2l

    tunnel-group ipsec-attributes parkplace

    pre-shared-key *.

    The Remote Site configuration

    interface Vlan1

    nameif inside

    security-level 100

    address 172.20.1.1 IP 255.255.255.0

    !

    interface Vlan2

    nameif outside

    security-level 0

    IP 192.168.1.2 255.255.255.0

    !

    interface Ethernet0/0

    switchport access vlan 2

    !

    interface Ethernet0/1

    ICMP list extended access permit icmp any one

    access-list SHEEP extended ip 172.20.1.0 allow 255.255.255.0 172.17.1.0 255.255.255.0

    extended VPN 172.20.1.0 ip access list allow 255.255.255.0 172.17.1.0 255.255.255.0

    Global 1 interface (outside)

    NAT (inside) 0 access-list SHEEP

    NAT (inside) 1 0.0.0.0 0.0.0.0 outdoors

    Access-group ICMP in interface outside

    Route outside 0.0.0.0 0.0.0.0 192.168.1.1 1

    Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

    crypto map outside_map 1 is the VPN address

    peer set card crypto outside_map 1 83.111.252.242

    card crypto outside_map 1 set of transformation-ESP-AES-256-SHA

    outside_map interface card crypto outside

    crypto ISAKMP allow outside

    crypto ISAKMP policy 10

    preshared authentication

    aes-256 encryption

    sha hash

    Group 2

    life 86400

    Crypto isakmp nat-traversal 20

    tunnel-group fairmount type ipsec-l2l

    tunnel-group fairmount ipsec-attributes

    pre-shared-key *.

    Best regards / Asfar

    Hello

    Have you tried to replace the names of 'tunnel-group' entry with Ip address on both ends... ?

    Thank you

    MS

  • Help with conditional display and Validation

    Version 4.1.1.00.23

    Hello

    I'm having a difficult time with a conditional display and validation, I hope someone can help with.

    Requirements:

    When (Datepicker) Start Date or the end Date (Datepicker) change can display the reason for change (select list) and change Description (Textbox)
    If the page is saved without entering a reason change display an error message of validation that the reason for the change cannot be empty (NULL)

    What I tried

    Create a dynamic Action on the Start Date

    Event: Change

    Selection type: Article (s)

    Items (s): P51_START_DATE

    Condition: no

    Real Action Section:

    Action: Show

    Fire on Page load: Checked

    Display all the elements of the page on the same line: NO.

    Section of the elements concerned:

    Selection type: Article (s)

    Product (s): P51_CHANGE_REASON, P51_CHANGE_DESC

    I also created a dynamic Action with similar settings for the P51_END_DATE.

    I created a Validation for the P51_CHANGE_REASON as a function return error text:

    DECLARE
    v_start_date    work_items.start_date%TYPE;
    v_end_date      work_items.end_date%TYPE;
BEGIN
    SELECT start_date
          ,end_date
    INTO   v_start_date
          ,v_end_date
    FROM   work_items
    WHERE  work_items_id = :P51_WORK_ITEMS_ID;
    IF ( (v_start_date != TO_DATE(:P51_START_DATE,'DD-MON-YYYY') OR v_end_date != TO_DATE(:P51_END_DATE,'DD-MON-YYYY') ) AND
          :P51_CHANGE_REASON IS NULL ) THEN
        RETURN 'Change Reason must have a value';
    END IF;
END;

    The question

    I tried to create another dynamic Action to hide the P51_CHANGE_REASON and P51_CHANGE_DESC fields during the loading of the page, but when the date fields are changed and the validation is fired the P51_CHANGE_REASON and the P51_CHANGE_DESC are hidden again.

    There are two buttons to send the page: 'SAVE' will submit the page and stay on the page and 'SAVE_CHANGES' will present the page and creates a branch to the previous page (which is a relationship with the EDIT buttons to change recording).

    I can not loading the dynamic Action page for fires DO NOT when validation is triggered.

    I hope it is clear and if not what information can I provide?

    Thank you

    Joe

    Which the condition is failing and what browser? I tested it in Firefox and it works as it should. Can you confirm that?

  • Having a problem with Flash Builder and Extension Builder - images not apearing on Mac system

    Have a panel created in Flash Builder 4.5 with Extension Builder 2.1. Everything is fine when it is installed on a PC, but when it is installed on a Mac in the Panel images do not show.

    Mac and PC both using Adobe Photoshop CC. Both installed similarly. ZXP deposit using Adobe Extension Manager CC.

    Any ideas?

    Problem solved:

    The problem is when using

    Changing to

    Changing to

    Thank you

  • Published Web site has components shift and disappear when the browser annotation scale.

    Hello world

    I am including a link to the published Web site, as well as including some screenshots of what looks like the question from my point of view. Just like a pre-emptive note: I had this problem before, and it was resolved by publishing a completely new site. I have saved the file under a new name, but also published the site under a new name and continue to encounter this problem. In addition, nothing is extended to the edge (for this thing of infinite width/length of browser).

    Thanks for any advice or assistance!

    http://argp07.BusinessCatalyst.com/index.html

    Y01.jpg

    ^ This is what the site looks like Muse.

    N01.jpeg

    ^ What the published site looks in my browser (Google Chrome) to 100%.

    The word 'Practice' is missing in the upper right of the page.

    Everything is well proportioned.

    N02.jpeg

    ^ What the published site looks like in my browser (Google Chrome) 90%.

    The word 'Practice' has re-emerged, but the vertical line disconnected (shifted down).

    Everything is well proportioned.

    N03.jpeg

    ^ What the published site looks like in my browser (Google Chrome) 80%.

    The word 'Practice' has disappeared again, as well as the vertical line.

    Everything is well proportioned.

    N04.jpeg

    ^ What the published site looks like in my browser (Google Chrome) 70%.

    The word 'Practice' has disappeared again, and the vertical line disconnected (shifted down).

    Text box at the bottom has turned into two lines of text.

    The layers of this provision include:

    Vertical line (rectangle of 1 px width)

    Horizontal line (rectangle of width 3 px)

    Text box group of practical architects

    White rectangle ON the bottom of the text box practice group of architects, UNDER the vertical and horizontal lines.

    The Accordion Panel

    Slide show

    Contact info text box

    I'm waiting for the line is defined as a footer in the properties of the Site (and/or the Page Properties) and "Sticky Footer" is so the footer sticks to the bottom of the browser window if the content of the page is shorter than the browser window.

    Your design, I hope that you want to disable "Sticky Footer" in the Site properties and disable "Item footer" to the line.

  • Other devices with yellow! and cannot connect to internet after reformatting

    I reformatted my gateway with the original XP disc. Now the multimedia audio controller is missing and there are several "other devices" with yellow! I tried to update the drivers on the site of the bridge for this model, but it's still a mess, and I can't connect to the net!

    Hi BrianFiles,

    If you have reinstalled Windows XP after formatting the hard drive, then you will need to install all the necessary drivers on the computer for devices work correctly.

    You can try to search for hardware changes in Device Manager and later proceed to reinstalling the driver.

    1. Click Startand then click run.
    2. Type devmgmt.msc , and then click OK.
    3. In Device Manager, click on your computer so that it appears highlighted.
    4. Click Action, and then click find the hardware changes.

    I suggest that you download from the site of the Bridge and save all necessary drivers on the hard drive and then try to install the drivers, check if it helps.

    Also reinstall the drivers for the chipset on the site of the bridge.

    If you still cannot get sound on the computer then go to the link below and run the troubleshooter available, check if it helps.

    No sound in Windows

    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

    How to troubleshoot unknown devices listed in Device Manager in Windows XP
    http://support.Microsoft.com/kb/314464

    Troubleshooting of conflict of devices with Device Manager
    http://support.Microsoft.com/kb/310126

  • How to configure NAT for Hyper-V on laptop with wifi, wired and vpn connectivity

    Me, as I suspect a lot of people, I have a laptop with WiFi connection, cable connection and VPN connection (Cisco AnyConnect), which

    also uses a virtual adapter (activated when active). I searched for some time a way to be able to move to

    Hyper-V in VirtualBox. Blocker full for me is the need for a lot of my virtual machines to be able to connect to the

    Internet through 'the connection active' in the way that VirtualBox and VMWare Workstation/Player through their NAT feature.

    I'm not a networking wait, but after looking around, can't seem to find something that is simple enough for me to configure,

    with a minimum of resources, which allows me to connect a Hyper-V virtual network via a simple NAT device adapter

    all three potential network connections - most seem to not assume that one connection out of the machine, which of course does not

    me what I want.

    Three questions:

    1. is there a Windows application available that an adapter (like loopback) internal which acts as a real NAT device to one of the surfaces

    external access via the active network connections and through the Windows Firewall and any other antivirus, components etc. for

    the road to (i.e. behaves like a "normal app" inside Windows for internet access)? It would be the best option, because it would be

    "always there" when I run virtual machines

    2. display of my lack of knowledge around this feature, don't RRAS (and I know that this is not an option "minimum contact") allow you to

    Connect an internal network adapter to several external network adapters?

    3. on the Linux/OpenBSD various base/NAT routers, are everything that allow several external adapters and who are

    relatively easy to set up (by an independent expert of the network)?

    Really, we could do with this feature for Hyper-V on the desktop, but willing to work around him, if there is a way to at least the

    use virtual machines, once it is easy to install.

    Hello

    The question is more suited in the TechNet forums. So I would say you mention the link and send the request in this forum for better support.

    http://social.technet.Microsoft.com/forums/en-us/w8itpronetworking/threads

    For any information related to Windows, feel free to get back to us. We will be happy to help you.

  • UPDATE multiple columns with conditional parameters

    I have a procedure that updates several columns of a table using the parameter of the procedure. Is it possible to have a update unique with the parameter SET conditional statement?
    CREATE TABLE TEMP
(POL_NUM NUMBER,
OED DATE,
TERM NUMBER,
TRANS_CD CHAR(2));

INSERT INTO TEMP VALUES (1, '1 AUG 2009', 12, 'NB');
INSERT INTO TEMP VALUES (2, '4 AUG 2009', 12, 'XL');
INSERT INTO TEMP VALUES (3, '2 AUG 2009', 12, 'RN');
COMMIT;

CREATE OR REPLACE PROCEDURE TMP_PROC (
  pPOL_NUM NUMBER,
  pOED IN DATE,
  pTERM IN NUMBER,
  pTRANS_CD CHAR2)
AS
BEGIN
  IF pOED IS NOT NULL THEN
    UPDATE TEMP SET OED = pOED WHERE POL_NUM = pPOL_NUM;
  END IF;

  IF pTERM IS NOT NULL THEN
    UPDATE TEMP SET TERM = pTERM WHERE POL_NUM = pPOL_NUM;
  END IF;

  IF pTRAN_CD IS NOT NULL THEN
    UPDATE TEMP SET TRANS_CD = pTRANS_CD WHERE POL_NUM = pPOL_NUM;
  END IF;
  COMMIT;
EXCEPTION
  WHEN OTHERS THEN
     NULL;
END;
    Is it possible to replace several IFs code to have only one UPDATE statement with the condition that update the column only if the parameter passed is not null? In the real world scenario, I have more than 3 columns and I do not want to write lots of IF blocks.

    Please help gurus!

    Published by: Kuul13 on September 18, 2009 13:26

    Hello

    Maybe this,.

    Create OR Replace Procedure TMP_PROC( pPOL_NUM  IN Number
                                    , pOED      IN Date
                                    , pTERM     IN Number
                                    , pTRANS_CD IN Varchar2 ) As
Begin
   UPDATE TEMP
      SET OED      = NVL(POED     , OED )
        , TERM     = NVL(PTERM    , TERM )
        , TRANS_CD = NVL(PTRANS_CD, TRANS_CD )
    WHERE POL_NUM = PPOL_NUM;
   Commit;
Exception
   When Others Then
      Null;
End;

    Kind regards
    Christian Balz

  • I can't publish my site with an existing domain.

    I bought a domain of www.nominalia.com, and I can't or don't know how to publish my Web site.

    Nominalia updated the DNS for this:

    NS1. WORLDSECURESYSTEMS.COM 54.236.190.129

    NS2. WORLDSECURESYSTEMS.COM 54.246.209.121

    NS3. WORLDSECURESYSTEMS.COM 54.252.148.151

    but the site still does not work.

    I don't know what to do, help me please.

    I think that the problem is solved because the domain now points correctly to the servers of BC, it was probably a delay.

    Thank you

    Sanjit

  • Cannot access a web site with a redirected and then Firefox freezes and having to recharge!

    Everything I click on to go to this web site is redirected, EVERYTHING! I can't load a page without copy and paste the address in the bar. He did not have this before, now it happens every time! Thank you!!!

    Do a check with some malware malware, analysis of programs on the Windows computer.

    You need to scan with all programs, because each program detects a different malicious program.

    Make sure that you update each program to get the latest version of their databases before scanning.

    Alternatively, you can write a check for an infection rootkit TDSSKiller.

    See also:

Maybe you are looking for

  • Downloaded version en-US, program works well in German

    I downloaded the Version of FF 23.0-US, however everything in FF is in German but. I'm located in Germany and unfortunately have a German version of Windows 8 Pro. Change in the topic: config general.useragent.locale to en-US has not helped. What can

  • Apple music isn't streaming songs that are not in 'my music '.

    Since yesterday, Apple is no longer music any music that is not in my music. If I go on For You or New and tap a song I don't have in my music it looks that it is subject to play, but then instantly give up and does not play. Nothing that I cannot ma

  • Need manual for TAB 2 A10-70

  • Timed-loop frequency of 1 MHz

    I have two codes for my NI9024 cRIO; an FPGA and a side side of RT. In my RT code, I use a frequency of 1 MHz for my timed loop. Just wanted to check if I should consider certain things important when using this frequency or not. I mean, is there a p

  • Diffie-Hellman - ASA firewall groups

    Hi all A couple of questions I hope you can help me with that. Please can you tell me where I would change the Diffie-Hellman group for phase 1 on an ASA firewall and is - it possible on the ASDM? Also, you must enable PFS have to DH on the phase 2?