Read CD only Gold records: Portege 660

I had to format my portege 660cdt. I had no disc provided with lattop.
Have installed win95 cd and works fine except that it is only the reading of Gold records. He did read other disks before formatting.

Hello

I put t really know what you mean with Gold records. You know very well that there is often no good explanation for some problems that occur especially for the oldies.

If the device can read original discs of music or data discs I put t see any problem. It's always nice to know that someone is very pleased with these older devices.

Good luck!

Tags: Toshiba

Similar Questions

  • How to read/select only the records from a table with non-English characters

    Hello
    I need to find all records in a table with non-English (mainly Chinese) characters in at least one of the varchar2 columns. Let me kow if someone knows a way by which it can be done using SQL/PLSQL.

    Best regards
    Imran
    select * from your table
    where your_column != convert(your_column, 'UTF8', 'US7ASCII)
    

    Replace UTF8 with your database character set

    Published by: thtsang on October 15, 2009 03:53 - unequal sign change of! =

  • Need to view daq reads per second but only to record a reading every 10 minutes. I would also like to record the date and time, at the same pace. Need help

    Need to show daq reads per second, but only to record a reading every 10 minutes, need help

    You are also looking to taste to 1 Hz data acquisition?

    My approach would be to use the DAQ acquisition to time your loop display reading each acquisition, then use the loop counter to control the logic of your writing to file.  For 1 Hz and 10 minutes write I would use 'quotient and remainder' I / 600; If rest = 0, then write the data point.

    For the date and time, under Calendar palette use the time get in seconds food a DateTime Format to a string.

  • List of values do not fetch all records are read only 25 records of entry

    I have a vo... on which an attribute is to have a list of input values that came from other vo called peoplesearchvo...

    On the user interface, I get only 25 records in the list of input values... I tried several things but still did not work

    in the peoplesearchvo... Tuning part I gave all the rows in batches of 20, according to the needs... Mode... scroll and rangesize = 1

    On the user interface in the section of links to the properties of the iterator, it is rangesize - 25 and updating is the (delay) default mode.

    I did not change when even... I get only these 25 records failed to retrieve all records, even after I scroll down.

    Can you get it someone please let me know about it

    Thank you

    Yes, it is a bug in the ADF (fixed in 11.1.1.7.0).

    If you have oracle support account, see note: 1456824.1

    According to this note, you need to patch 13924897

    Dario

  • Why only first record?

    Hi, I have a bpel process, I read sap db with invoke I transform and write data to oracle. But it works only the first record. I see the i cannot read the XML all SAP db but I did not understand why he transform and written only first recorded. Any idea?

    Hello

    If you have several folders umay need to use foreach in the transformation.

  • In XP PRO SP3 WMP11, will add all my files in the library. I added the folder, but it adds only 116 records 2000

    In XP PRO SP3 WMP11, will add all my files in the library. I added the folder, but it adds only 116 records 2000

    In XP PRO SP3 WMP11, will add all my files in the library. I added the folder, but it adds only 116 records 2000

    You cannot view, add, or delete items in the library of Windows Media Player 11

  • SQL loader is loading only one record

    I use SQL loader to load a CSV file into database

    sqlldr CON CONTROL = 'test.ctl' = 'TEST.log' = bad "bad.bad" LOG DATA = ' test. DAT'

    How ever I always only one record

    CTL file

    OPTIONS (ERRORS = 50)

    DOWNLOAD THE DATA

    ADD

    CONTINUEIF NEXT(1:1) = ' # '.

    IN TABLEtest

    FIELDS TERMINATED BY' '

    SURROUNDED OF POSSIBLY ' "" ' AND ' "'"

    TRAILING NULLCOLS)

    "Etest_ID" (27) TANK.

    'test_IND' CHAR (8),

    'test_SUB_IND' CHAR (12),

    "test_GIND1" TANK (9).

    "test_GIND2" TANK (9).

    'test_STATUS' CHAR (11),

    'test_STATUS' CHAR (11),

    'test_AMOUNT1' CHAR (14).

    'test_AMOUNT2' CHAR (14).

    'test_AMOUNT3' CHAR (14).

    'test_AMOUNT4' CHAR (14).

    "test_GIND21" TANK (9).

    "tet_GIND3" TANK (9).

    'test_STATUS1' CHAR (11),

    'test_STATUS2' CHAR (11),

    'test_AMOUNT1' CHAR (14).

    'test_AMOUNT2' CHAR (14).

    "test_FLAG" TANK (9).

    'test_USED_FLAG' CHAR (15).

    "test_FLAG" TANK (9).

    'TtestL_TRF_AMOUNT' CHAR (16).

    'testF_DATE' CHAR (8),

    'test_STATUS' CHAR (14))

    data file

    'AB00431MT00377_110915_00000 '."PP"."    "« Y »« Y »'TRAN '."FAILURE."'00000008667.15 '.'00000000000.00 '.'00000000000.00 '.'00000000000.00 '.« Y »« Y »'ZERO '.'ZERO '.'00000000000.00 '.'00000000000.00 '.« Y »« Y »" "'00000008667.15 '.'2111014 '.« S »
    'AB00431MT00377_110915_00000 '."PP"."    "« Y »" "'ZERO '."    "'00000000000.00 '.'00000000000.00 '.'00000000000.00 '.'00000000000.00 '.« Y »" "'ZERO '."    "'00000000000.00 '.'00000000000.00 '.« Y »" "" "'00000000000.00 '."0000000".« R »

    Help, please

    I tried generating CTL gall in various Noah this option worked. It is urgent please help

  • I currently have version 15.3, Adobe Reader can only install the previous version? [Android]

    I currently have version 15.3, Adobe Reader can only install the previous version? If no update on 15/11/2015. If so, please write where and how?

    Hi ventorr,

    15.3 drive is the latest version for Android OS.

    The previous version can be available and downloaded here:

    FTP://FTP.Adobe.com/pub/Adobe/Reader/Android/

    Let me know how it goes.

    Kind regards

    Ana Maria

  • I just installed Prime Minister 11 items and when I save a project, it is only to record the audio.

    I just installed Prime Minister 11 items and when I save a project, it is only to record the audio. I made sure that export audio and video boxes are checked in the advanced Panel, but still only audio. When I went to save it, I got a pop up that says something in mircosoft wanting to make changes to my computer and I clicked on is not to think that they were related (and), but only audio get exported. I have quick time installed, but still nothing. Help, please!

    Amandaw

    There may be an explanation for what you are experiencing.

    On what computer operating system is your first items 11 running? Windows 8 or 8.1? And you are exporting to a file MPEG2.mpg and playback on Windows Media Player? If this is the case, please download and install the VLC Player

    VideoLAN - official page for VLC media player, the video frame Open Source!

    and let us know if export plays back video and audio on this drive.

    If that's the problem known Microsoft MPEG2 Windows Media Player, and then explore publish them + share/computer/possibilities other than MPEG or use VLC instead of Windows Media Player player for playback of MPEG2.mpg exports.

    Please let us know the result.

    Thank you.

    RTA

  • Help with the query to select only one record from the result set in double

    Hello

    Please help with the query. Version of Oracle database we use is 10g R2.

    I have a vision that is duplicated IDS, but they are used across the different functions. See below examples of data. Please help me with a query to select only one record (based on ID regardless of the area) from the bottom of the result set of duplicate records. For what is the point of view is there unique records, given the combination of the fields ID, Org, DF, dry, Sub-Sec

    ID
    Org
    DF
    Sec Sub-Sec

    (163)CQCPDMCPDMHD(163)PCENGENGENG(163)CQASICASICIS8888TSTACTACTAC(163)TSHEHESW6789CQINFOINFOFOS6789PCSECSYSSECSYSINFO16789TSSECSYSSECSYSINFO29009PCBMSBMSBMS1

    My result set must eliminate the duplicate identifiers regardless of whoever we choose of the result set. (I mean without distinction Org, DF, s, Sub-s). My expected result set should be.

    ID
    DSB

    DF
    SEC
    Sub-Sec
    (163)CQCPDMCPDMHD8888TSTACTACTAC6789CQINFOINFOFOS9009PCBMSBMSBMS1


    Thank you

    Orton

    Hello

    This sounds like a job for ROW_NUMBER:

    WITH got_r_num AS

    (

    SELECT id, DSB, df, s, sub_sec org

    ROW_NUMBER () OVER (PARTITION BY ID.

    ORDER BY org

    ) AS r_num

    OF view_x

    )

    SELECT id, DSB, df, sub_sec s,

    OF got_r_num

    WHERE r_num = 1

    ;

    He is a Top - N query example, where you choose the elements of N (N = 1 in this case) from the top of an ordered list.

    I hope that answers your question.
    If not, post a small example of data (CREATE TABLE and INSERT, only relevant columns instructions) to your sample data and the results desired from these data.  (I know that you said that you were a view selection.  Just for this thread, pretending it is a picture and post simple CREATE TABLE and INSERT statements to simulate your point of view).
    Point where the above query is to produce erroneous results, and explain, using specific examples, how you get the right results from data provided in these places.  (I didn't quite understand the explanation above.  I don't know why you want to

    ID ORG DF DRY SUB_SEC

    --      ---     --      ---     -------

    1234 CQ DPRK DPRK HD

    and is not

    1234 IS CQ ASIC, ASIC

    or

    TS 1234 IT IT SW

    or

    1234 CQ ASIC ASIC HD

    )
    If you change the query at all, post your modified version.
    Always say what version of Oracle you are using (for example, 11.2.0.2.0).

    See the FAQ forum: https://forums.oracle.com/message/9362002

  • 'Reader' will only display a PDF file for a second, then here down the PDF file.

    I recently had an automatic update "Reader" and now "Reader" will only display a PDF file for about a second and then closes the PDF file.  This happens to all PDF documents any what scource.  I am running Windows 7.  What should I do to correct the situation.  (Yes - I've removed the "reader" of my computer, re-installed it.)  Did not help).

    Access to 11 C/programs/Adobe/Reader / player.

    Looking for a file named eula.exe (or just eula).

    Double click on it.

    Accept the license agreement.

    Drive should work fine from there.

  • Return only the records with a string of text that is less than a certain value?

    Hi people,

    I'm not sure whether this is possible or not, but worth-

    I need to be able somehow output only the lines with the text of a column field less to (because of the arguments) 30 characters (including spaces). I know that I can use CFs Left() function to cut the chain, but I don't want to have words cut off mid-sentence. Therefore, I want to somehow restrict the query to only the records that contain a string of less than 30 characters.

    Is this possible?

    Thanks in advance :-)

    You can use the length of the db function. It may or may not be named LEN()

    SELECT SomeColumn
    FROM YourTable
    WHERE LEN (SomeColumn)<=>

    Or you can retrieve all of the records and use one of the functions of the chain at cflib.org as FullLeft().
    http://www.cflib.org/UDF.cfm?id=329

  • SD card reader supports only 1 GB cards satellite 2450-101

    I just bought a Kingston 2 GB SD card. Despite many efforts, I can't get my 2450-101 to format 1 GB storage on this map.
    Someone at - it of this experience and a way around it?

    I found in googel Satellite 2450-101 specifications and it seems that the card reader can manage only the SD card without support MMC. Additional not all card format SD is supported and therefore in my opinion the 2 GB format SD card is great

    I put t know if it will help you but I read somewhere in the forum about similar themes. The Toshiba SD card format utility has been updated and could format the 2 GB SD cards. I don't remember the version of this utility, but you can try to download the SD card from the Portege M400 section format utility.
    But as mentioned, I don't know if this utility works on the Satellite 2450 m.

  • Cannot read DVD on flea market Portege M300

    Hello.

    I wonder if someone can help me. I bought an flea market portege M300 and it's fine - however I could not create recovery discs that the option was not on the section Protect and Fix on Toshiba Assist.
    Now, I can't read the DVD.

    I guess that sort of resettlement was made but not with the toshiba recovery discs and so I can see I can play DVD CD or burn CDs. Does anyone have any ideas as to what I should do. Toshiba send me a recovery disc for the machine and so I was wondering if they would be on these discs and if I should wait until they arrive.

    Thank you, best regards,.

    Rachel

    Hello

    Does the drive support the function of burning?

    You can try to enter in the properties of the drive and select the recording tab.
    The option activate write to this drive must be marked.

    On the Toshiba Recovery CD, you will find an image with preinstalled operating system and all the Toshiba drivers needed and utility.
    If you want to watch DVDs if you need special software such as WinDVD or PowerDVD.
    These are applications of DVD player. I guess the WinDVD must be preinstalled on the image.
    To burn a CD s, you are also burning software. I advise to use a Nero.
    For me this is one of the best burning applications.

    You should try using different media. You should know that not all media are compatible and supported.

    You bought this laptop as a second hand unit, so it is possible that the drive is bad. Sometimes, if the drive cannot burn or read some of the media due to the error of calibration of lens. In this case there are not a lot to do to replace the drive.

  • LOV opened from column in the table always showing only 25 records

    Hello. I'm on Jdev 11 g R1.

    I have main VO with an attribute with LOV (entry LOV). The LOV VO defined in tuning as 'all lines' and range is set to-1

    Main LOV fell into the page and column is made in the form of entry-level LOV as expected. Everything works ok.

    But when I opened the LOV is showing 25 records. I have to scroll to the end and click on the button "Search" once again to see the rest of the records (total 48). It shows not all records and scrolls automatically when I start to scroll down, but stops at 25 records.

    I can't change the size of the beach of LOV since it is located in the table, so there is no access to the iterator LOV.

    How can I force LOV to see all records?

    As far as I KNOW, there is a bug in 11.1.2.x (and if you have a support contract, you can request the fix for it)

    Also associated with R1: list of input values does not fetch all records of documents only 25 are read

    Dario

Maybe you are looking for

  • Question about re - install the software that came with the computer

    I inadvertently deleted the controller Ethernet and Bus High Definition Audio my laptop while trying to remove the Real Player I downloaded. How can I get these? What do I need to use the recovery disk that came with the computer or y at - it another

  • problem on windows

    Greetings, I installed 10 windows but the laptop EliteBook8530w does not work effectively as eailier when I have windows 8.1, now I want to reinstall windows 8.1, I was wondering if you could please guide me in the next concern. Kind regards Zoya1.

  • Re: Satellite L300 - Keep recovery partition when you use DBAN

    Hello I usually use DBAN to wipe my drives, however, I am interested in doing this on a laptop without destroying the recovery partition. Essentially on a satellite L300 I want to erase the HDD using DBAN (Darik Boot and Nuke) (while maintaining the

  • ProBook 430 m2 (NGFF) SSD

    I recently bought a HP probook 430 G1 mobile. It came with a standard 500 GB 5400 RPM HARD drive. I want to improve it with an SSD.Obviously, I have the standard option of a SSD 2.5 ", but I know that this laptop has an empty slot, which should be a

  • BlackBerry Smartphones last one. The font size for the 8900?

    How do you change the size?  I don't see a way - at least not as my old curve.  Does anyone know?  Thank you!