Read file test.txt (binary or what?) with LabVIEW 8.6

Dear friends!

Please, how to read the attached file (test.txt) with LabVIEW 8.6. In the same VI, can I convert it in a txt file real with the results presented in the rows and columns? Please, any idea? I need help!

The rebooting of the trace file is binary.

Unfortunately, without a description of the real file by developers RELAP format, I don't think you are going to get very far on the decoding of the file.

You must get directly in contact with the authors RELAP.

Here's the blurb to the RELAP Manual:

3.1.4.2 the reboot-Plot file.

The restart-trace file contains almost all the parameters of calculation

(Sub fractions, pressures, temperatures, flow rates, etc.) for transient computing together.

A common misconception is that a parameter must be specified using a minor in change request

in order to be available in the reboot-trace file when the calculation is complete. Affects a minor change request

only the printed output. The restart-trace file is accessible repeatedly that the new data should arise. However,.

during a calculation, the data are written to the reboot-trace only for minor editing file (and the plot point)

frequency. Once a calculation has been performed, it is not possible to recover data between data

written to the file to restart-track of the points. Therefore, it is important to choose a minor edit (and plot the point)

frequency that provides the plot to an interval appropriate to the problem is resolved. In practice,.

the minor change (and plot point) frequency must be changed during the calculation as the product of the problem

from one phase to the other. Common points must be selected in the phases of problem where rapid

RELAP5-3D/2.4

INEEL-EXT-98-00834-V5 3-18

setting changes are expected. For the economy, less common points must be selected in the phases

where the conditions of rest are expected.

Calculations are usually made using several reboots. (See Volume II for the restart entry

requirements.) For example, a new problem runs from 0 to 10 seconds. This first part is analyzed and

Run again from time zero that errors will be corrected. When a managed to 10 seconds has been calculated, a

restart run is made (for example, 10 to 30 seconds), and so on. RELAP5-3D

change of almost any feature of the model at any point of restart. When changes to the model are incorporated on

reboot, reboot-plot file reflects those changes only after the decimal point in the calculation, where they have been

implementation. In the example above, if an injection system is added to the model to 10 seconds, then data

for added components exists only for the time after 10 seconds. Changes, deletions and additions of model

are constantly being implemented. If a model change is done in 10 seconds, the revised model remains in

effect unless other changes are made to subsequent restart points.

When a calculation is completed, the restart-trace file becomes a valuable document of the

calculation. If lost, replacement would require reperforming the calculation, usually to the considerable

loads. At a later date, the file can be accessed and previously compressed data can be obtained as

necessary to extend the analysis. Therefore, it is recommended that files of restart-track of the important calculations

be protected safely and permanently.

Tags: NI Software

Similar Questions

Network wusb300n wireless adapter creates test.txt on my C drive

Hello.

The software of network WUSB300N wireless adapter/monitor creates the file test.txt on my C drive.

This file is required, and if not, how can I stop this generated file?

Thank you.

Thank you. It has worked flawlessly. I'll just use network monitor in Windows, rather than the LinkSys one.

Thanks again for your help.

read mixed type C binary file

Hello

I have the script program, which can produce the desired data in csv, ASCII and binary file format. Sometimes not all of the useful numbers are printed in the csv file, so I need to read data from the binary file.

I have atttached what I have so far and also a small csv and the bin file, containing the same data.

I read the first value of the integer (2), but the second data type is a string, and I can't read this one... I get the error at the end of the file, I guess because the type does not, or I guess I should read the data in a different way?

According to what I see in the csv file, the structure of the binary file should be the following:

integer, String, float, and repeated once again all the lines in the file csv...?

Thanks for the tips!

PS. : the site does not allow me to upload files, so here they are:

https://DL.dropboxusercontent.com/u/8148153/read%20Binary%20File.VI

https://DL.dropboxusercontent.com/u/8148153/init_in_water.csv

https://DL.dropboxusercontent.com/u/8148153/init_in_water.bin

Here is a basic example of what I mean. Oh, the whole analysis and the string. The floating-point number at the end is not decode properly. I tested on the first entry in your file binary. If you have access to the code that generates this data, you can see exactly what format the data is. Your data seems to be 22 bytes of length.

Concerned by several users, reading files interfering with write access to the files

I have a LV MY application that will run in several places/computers. Each will create a single HTML report and update frequently. These HTML files will be accessed and combined by another application of LV in a new HTML file that will be updated frequently. All HTML files could be opened by a user at any time in a web browser.

What concerns me, it's HTML reports could be avoided by a user, or the application of the combination to be written by the app MY? If the user or application combining a box open report she always written by the app MY? It goes the same for the app combining prevented to be written if a user has his open output HTML code?

Each HTML file can only be written by an application but read by many potential users and/or an app.

All programs run independently and asynchronously. Each application runs on its own computer and files all exist in a network location.

Can I do this by controlling all users file privileges? If anyone has read only permissions except the written computer the HTML file that will be enough?

MES Manufacturing Execution System is

Thank you

Judd

I guess as long users see the reports with a web browser, it should be no problem.

Browsers Web do not "lock" a file when they open it like Word or Excel because web browsers are not and should not modify or change the file somehow.

If only one person could display a web page to internet time would not work as we know it.

But if you're worried about it use LabView to lock files during execution of the program. Only in this way, users can open the file as read-only if they use something that can change the files. If you use the standard LabView open file read/write vi passing a file reference, then this will be done automatically.

How to get the string (specified by row and column) of txt file with labview

Hello world

How to get the string (specified by row and column) of txt file with labview

THX

As far as I know, a text file has no column. Be more specific. Do you mean something like the 5th word on line 4, where the words are separated by a space, and lines are separated by a newline character? You can read from the spreadsheet String function and set the delimiter to a space. This will produce a 2D channels table. Then use the table to index and give the line number and column number.

read an AVI using "Binary file reading" vi

My question is to know how to read an avi file using vi «The binary read»

My goal is to create a series of small avi files using IMAQ AVI write framework with the mpeg-4 codec to long 2 seconds (up to 40 images in each file with 20 frames per second) and then send them one by one in order to create a video stream. The image has entered USB camera. If I read these frameworks using IMAQ AVI read framework then compression advantage would be lost if I want to read the entire file itself.

I've read the avi file using "Binary file reading" with 8 bit unsigned data format and then sent to the remote end and save it and then post it, but it did not work. Later, I found that if I read an image using "Binary file reading" file with 8 bit unsigned data format and save it to local computer itself, the format should be changed and it would be unrecognizable. I'm doing wrong by reading the file format of number integer 8 bit unsined or should I have used other types of data.

I'm using Labview 8.5 and Labview vision development module and module vision 8.5 acquisition

Your help would be very appreciated.

Thank you.

Hello

Discover the help (complete) message to "write in binary.

"Precede the size of array or string" entry by default true, so in your example the data written to the file will be added at the beginning information on the size of the table and your output file will be (four bytes) longer than your input file. Wire a constant False "to precede the array or string of size" to avoid this problem.

Rod.

I just looked at problems with importing files from nikon D810 in LR 5.7 it pop a window saying it can't read the files to work on an imac 27 "yosemite on my mac pro running after several times he finally managed to read files and import them into LR

I just looked at problems with importing files from nikon D810 in LR 5.7 it pop a window saying it can't read the files to work on an imac 27 "yosemite on my mac pro running after several times he finally managed to read files and import them into LR, I never had this problem before there was a sort of update that could from cause?

What is the destination folder that the date be underneath? In the top right it says users who suggests, you try to put the photos on top of your username instead of under your username. Maybe that's the problem. So change your folder in the drop-down list at the bottom right of what it should be rather than users, and if you're going to show us the destination of your photos at least scroll through the list of folders down right so that we can see which is the white highlight.

Here is how mine looks like if I want to put my photos imported under my subfolder users - Steve - photos by date:

Need of XLSX files tested to see if there is a problem with the content library
Hello

I have a file which causes an error when you use the library of Stellent. The file is a file XLSX and when we open and then save the file again, then does not cause the error. This leads me to believe that the file has been successfully created or something wrong with the library. More than likely it is the file. Is there any tool that I can use to test the file that will tell me what exactly is the problem? The file is automatically generated by a survey company. And so if we can show a problem with the file itself, then they will have to solve the problem in their autogenerator.

Thank you
Larry

Published by: 1000345 on April 16, 2013 06:44

Published by: 1000345 on April 16, 2013 06:45

Published by: 1000345 on April 16, 2013 07:00

Published by: 1000345 on April 16, 2013 07:00
Which, in my view, that we use it for is to get out of text or metadata files to create an index on the data.

Yes, it's also OutsideIn. I believe you can use the SDK to export research.

If I were you, I'd do some testing base of the new version and it doesn't help, create a service request in Metalink so that management can take a peek inside.

Cannot read file backupset with RMAN cloning
Hello

I'm performing cloning on windows for windows operation. On the target, I took via rman backup using the recovery catalog. I got fresh backup of database as well as any archivelogs and delete the obsolete using the rman recovery catalog repository.

When I connect to target, Recovery catalog and the auxiliary instance after that running some RMAN commands gives the error that it is impossible to read file backupset. What could be the reason for this. I write the list error part of RMAN please see and tell me what could be the reasons I took fresh backups and it seems that it is impossible to read this particular backup.
channel ORA_AUX_DISK_1: reading from the backup C:\ORACLEBASE\PRODUCT\10.2.0\F piece
LASH_RECOVERY_AREA\ORCL\BACKUPSET\2010_09_27\O1_MF_NNNDF_TAG20100927T125050_6B0M
6YLD_. BKP
ORA-19870: error reading backup total C:\ORACLEBASE\PRODUCT\10.2.0\FLASH_RECOVER
Y_AREA\ORCL\BACKUPSET\2010_09_27\O1_MF_NNNDF_TAG20100927T125050_6B0M6YLD_. BKP
ORA-19505: impossible to identify the file 'C:\ORACLEBASE\PRODUCT\10.2.0\FLASH_RECOVERY_ '.
AREA\ORCL\BACKUPSET\2010_09_27\O1_MF_NNNDF_TAG20100927T125050_6B0M6YLD_. BKP ".
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 3) the system cannot find the path specified
switch to the previous backup

RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of Db in dual at 2010-09-27 13:17:22
RMAN-03015: an error has occurred in the script stored memory Script
RMAN-06026: some targets not found - abandonment of restoration
RMAN-06023: no backup or copy of datafile 6 to restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of the file 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore

RMAN >

Please help me in this matter.

Kind regards

Abgrall
If your RMAN backup exists on the target server path.

Target server: C:\Oracle\RMAN_BACKUP\

Put on the same location on the auxiliary server.

Auxiliary server: C:\Oracle\RMAN_BACKUP\

When cloning also connect with your catalog of recovery that you use the catalog of recovery for the server target.

Concerning
Asif Kabir

Published by: asifkabirdba on 27 Sep, 2010 14:51

Problem with reading file xls with text inside

Hi all

I have a problem to read the excel (xls) file with the first line containing chains of different length.

I wonder how can I skip the first line and continue reading of the second line.

Thank you very much.

I only have saved VI.

So here are the names.

Downstairs: open the file. Text reading file with lines of selected reading (right click for the menu to find). Read the text file with lines of reading not selected. Close the file. At the top is spreadsheet String to Array.

I cann't open exe file when I open always open with adobe reader.when I uninstall adobe reader my exe file work but I still need adobe for my pc

I cann't open exe file when I open always open with adobe reader.when I uninstall adobe reader my exe file work but I still need adobe for my pc.

Hello

read this and see if this solves your problem

http://www.Winhelponline.com/blog/restore-exe-file-Asso-Windows-7-Vista-incorrectly-associated/

Adobe *.pdf files can be opened in Internet Explorer, the default program can not be changed to acrobat reader in the properties or select 'Open with'

Adobe *.pdf files can be opened in Internet Explorer, the default program can not be changed to acrobat reader in the properties or select 'Open with'. Cannot change the default program of Adobe in the file association list.

I have the latest version of Adobe (9.3.3).

Hello

Don't forget to log on as an ADMINISTRATOR

Use this utility to unassociate the. PDF and then re - associate with Adobe Acrobat Reader.

How Unassociate a Type of Extension file in Vista and a utility to help
http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html

How to set default Associations for a program under Vista
http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html

How to associate a file Extension with a program Type in Vistahttp://www.vistax64.com/tutorials/69758-default-programs.html

How to view and change an Extension of filename on Vista
http://www.Vistax64.com/tutorials/103171-file-name-extension.html

Restore the Type Associations by default Vista file extensions
http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
I hope this helps.

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

"Can not open AsIO.sys (2)" I get this message when I log in after a reboot. I have search for the file, but can't find it with the research or the command prompt. What do do in this file, and can be created and put into the appropriate folder?

"Can not open AsIO.sys (2)" I get this message when I log in after a reboot. I have search for the file, but can't find it with the research or the command prompt. What do do in this file, and can be created and put into the appropriate folder?

Hi Jack,

This driver belongs to AsIO.sys Asus Probe. Try to uninstall Asus Probe and if you need, install again. If this does not help, uninstall Asus Probe and other tools of control such as Speedfan. Open the registry (regedit.exe) editor and search for AsIO.sys and remove all the entries that you can find.

André
"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

In CloverETL how to read file xlsx with a column of type "long".

Hi all
Let me know how to read an xlsx (Excel) file with columns of data type "long".
I used XLSDataReader to read file xlsx. There are names of "Remarks" column, which exceeds the linits of 256 characters, so I can not use type 'string' to do this.
IM using "long" datatype and graph below error crossings.
Pointers on this will be greatly appreciated.
INFO [main] - * graphic CloverETL framework/transformation, (c) 2002-2013 Javlin a.s., published under the GNU Lesser General Public License *.
[Main] INFO - running with CloverETL library version 3.4.1 build #010 updated 07/01/2013 18:38:12
INFO [main] - running on 4 CPUS, operating system Windows 7, architecture amd64, Java version 1.7.0_07, max memory available for JVM 913920 KB
INFO [main] - loading properties by default: defaultProperties
INFO [main] - graphic definition file: graph/SurveyResponses.grf
INFO [main] - graphical revision: 1.16 modified by: 470707 update the: kill Jan 20 16:13:52 IST 2015
INFO [main] - check the graphical configuration...
INFO [main] - graphical configuration is valid.
INFO [main] - graphical initialization (SurveyResponses)
INFO [main] - initialization of the phase 0
INFO [main] - Phase 0 initialized successfully.
INFO [WatchDog_0] - starting all the nodes in the phase [0]
INFO [WatchDog_0] - has successfully started all nodes in phase!
INFO [XLSDATA_READER1_0] - reading data of 0 sheet (Sheet1).
ERROR [WatchDog_0] - component [XLSDataReader:XLSDATA_READER1] finished with ERROR status.
How (long) field cannot be set to the value "comment." does not match the specified format ' ' with good reason 'incomplete analysis. " in folder 1, 23 ("comment"), metadata field 'Survey_Responses_Sheet1 '; value: 'How' (note that for parallel processing ParallelReader or server, run the registration number may be incorrect)
ERROR [WatchDog_0] - the error Details:
org.jetel.exception.JetelRuntimeException: component [XLSDataReader:XLSDATA_READER1] finished with ERROR status.
at org.jetel.graph.Node.createNodeException(Node.java:535)
at org.jetel.graph.Node.run(Node.java:514)
at java.lang.Thread.run(Thread.java:722)
Caused by: org.jetel.exception.BadDataFormatException: how (long) field cannot be set to the value "comment." does not match the specified format ' ' with good reason 'incomplete analysis. " in folder 1, 23 ("comment"), metadata field 'Survey_Responses_Sheet1 '; value: 'How' (note that for parallel processing ParallelReader or server, run the registration number may be incorrect)
at org.jetel.data.LongDataField.fromString(LongDataField.java:465)
at org.jetel.data.parser.XLSXDataParser.parseNext(XLSXDataParser.java:492)
at org.jetel.data.parser.XLSParser.getNext(XLSParser.java:136)
at org.jetel.util.MultiFileReader.getNext(MultiFileReader.java:432)
at org.jetel.component.XLSReader.execute(XLSReader.java:562)
at org.jetel.graph.Node.run(Node.java:485)
... 1 more
Caused by: java.lang.NumberFormatException: incomplete analysis
at javolution.text.TypeFormat.parseLongString (unknown Source)
at javolution.text.TypeFormat.parseLong (unknown Source)
at javolution.text.TypeFormat.parseLong (unknown Source)
at javolution.text.TypeFormat.parseLong (unknown Source)
at org.jetel.util.formatter.JavolutionNumericFormatter.parseLong(JavolutionNumericFormatter.java:74)
at org.jetel.data.LongDataField.fromString(LongDataField.java:462)
... 6 more
INFO [WatchDog_0] - the implementation of phase [0] completed with error - elapsed time (sec): 4
ERROR [WatchDog_0] -! Completed with error - graphic stop run!
INFO [WatchDog_0]-* the summary execution of Phases * -.
INFO [WatchDog_0] - Phase # finished status RunTime (sec) MemoryAllocation (KB)
INFO [WatchDog_0] - 0 4 175279 ERROR
INFO [WatchDog_0]-* end of summary * -.
INFO [WatchDog_0] - finished the watchdog thread - total running time: 4 (s)
INFO [main] - freeing graphics resources.
ERROR [main]-
--------------------------------------------------------------------------------------------------------------------------------------------------------- Error details ----------------------------------------------------------------------------------------------------------------------------------------------------------
Component [XLSDataReader:XLSDATA_READER1] finished with ERROR status.
How (long) field cannot be set to the value "comment." does not match the specified format ' ' with good reason 'incomplete analysis. " in folder 1, 23 ("comment"), metadata field 'Survey_Responses_Sheet1 '; value: 'How' (note that for parallel processing ParallelReader or server, run the registration number may be incorrect)
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ERROR [main] - the graph failed!

I think the 256 character limit is a red herring. All data is there, the front-end integrator is truncating only for display purposes.

Your data is a string, it should certainly be classified as a string in the metadata. For a long time is for numeric values.

I don't think there is a problem here, if you were to write this data to the trash or a text file (after reading it in), you will see that your data is not truncated.

Kind regards

Patrick Rafferty

Branchbird

I try to install the update of PS CS6 can read files camera raw Nikon D800. The exe file fails and says trying to install the application manager. I did it and the update still does not work. Now what?

I try to install the update of PS CS6 can read files camera raw Nikon D800. The exe file fails and says trying to install the application manager. I did it and the update still does not work. Now what?

update by downloading the files directly and then apply them: http://www.adobe.com/downloads/updates/

If this fails, attach a screenshot of the error message if it is in English. otherwise, quote it.

Read file test.txt (binary or what?) with LabVIEW 8.6

Similar Questions

Maybe you are looking for