Read file without knowing the full name

Similar Questions

• UTL_FILE: Read multiple files without knowing the names of the files

  Hello
  
  I use UTL_FILE and I would like to read a line in several files in the same directory, but without knowing the full name of the file.
  
  Thanks in advance for your suggestions!
  
  Stéphane

  I don't think its possible directly with utl_file. But you could use th ejava-class form tom kyte http://asktom.oracle.com/pls/asktom/f?p=100:11:1761435541976545:P11_QUESTION_ID:439619916584 for a list of the files and then treat one after the other with utl_file.

  I hope this helps.

• Read a PDF file without knowing the size of stream

  Hello

  while I am able to properly read a PDF file, the only way I can do it (in function
  on what I heard in the master PDF 1.7) is to go the end of the stream and
  start from here (section 7.5.5).

  But this requires the size of the stream to be known. While this is usually not a
  problem (since the flow is usually a simple file), I would like to make my
  a bit more generic and be able to manage any type of flow, as library
  as long as it is placed at the beginning of a PDF document.

  But unless I missed something of the form, when I'm dealing with a
  unknown flow (a person who could not yet be fully charged when I started
  reading, as an outlet), it is not how to do it. I mean, I could do it,
  but I don't would not be able to tell when I arrived at the end of the document. Not
  without some sort of length information (because I do not know where the stream)
  ends). I mean, where to stop? In a trailer? That works only if the
  document have never been updated.

  If, just after the header (%) PDF - he was a kind of meta-information on
  the size of the document (after all the updates, if any) I could move the stream to
  that post (wait for the data arriving, if necessary) and work my way of
  He (and from there, because I would like to know where the document ends). But since my
  understand, there is no way to retrieve such information.

  So, to sum up, in order to properly read a PDF document:
  -I always need to know the size of stream (which I might not be able to)
  -the data flow must end with the PDF data (which could be also not always true)

  Am I wrong?

  Unless the file has been established for "fast web view" (aka linearization - ISO 32000-1, Appendix F) Yes.

  BUT, if a file be linearized so that it can be better managed in flow (at least for some parts of the PDF file).  It is not supported to pure stream - which is not possible - but it will help.

• Need to know the instance name of window for Acrobat Reader XI

  I try to use a custom web program that launches Adobe Acrobat Reader XI and want to know the instance name for this version of Acrobat Reader window. I updated my version of Acrobat Reader 10.0 and the instance name of window seems to have changed, once again!

  This is the story of the instance name of the window for Acrobat Reader in case you don't know what I am referring. I tried all the supposed possible variation of what I expected it to be and all seem to fail. Adobe seems to have changed the name of the instance of the window.
  Also another note is that the new name of the server is "ACROVIEWR11" and it is the XI (11) version installed on a 64-bit computer to Windows 7, so who can make a difference.
  Any help would be greatly appreciated

  Acrobat Reader 10 - the window instance name = Acrobat
  Acrobat Reader 6 & 7 - the window instance name = Adobe Reader
  Acrobat Reader 5 - window instance name = Acrobat Reader

  Why not just use a reporting tool to find out?

• Navigate XML without knowing the names of nodes

  I want to save a HTTPService call XML data in an ArrayCollection collection without knowing the name of the node.
  Normally I would have:
  httpServiceId.lastResult.RootNode.ChildNames
  
  I want to save the ArrayCollection collection without knowing what the names are. Is it possible to do?

  I was able to understand. I downloaded the component to Exchange:
  http://www.Adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&loc=en_US&EXTID=1414 018

• Disabling update the configuration file without stopping the VI

  I would like to perform a function that when the new modules are added in the existing system of the public Service or hot swapping modules autour, the VI can update its configuration file. I don't want the VI to stop we will collect data 24/7.

  I use cFP2220 and two or three modules of different types. I have my work VI and it is fairly straightforward FP read.vi in a time loop. All data are stored in the database using the Labview database tool. My screws are hosted on the local PC, not on the controller. I'm using Labview 8.6.

  I guess I have to get the file configuration (iak), whenever new modules are added, the iak file can be changed (without MAX aperture). In any case, I would have the flexibility to run the VI continuous. I know there is a similar code here: http://zone.ni.com/devzone/cda/epd/p/id/3221and they get the configuration file in the ini file. But I don't know how it's done as I can save only the configuration file as a file iak for FP system.

  Another potential problem associated with that, I guess, is the database format. For now, I use a three column structure, i.e., DateStamp, value and ChannelID. In this case, if I want to add/remove/swap channels, I can just change the ID of the corresponding channel. What happens if I have a horizontal arrangement of the database, namely 10 columns corresponding to 10 sensors, would he be in trouble if I change channels modules?

  Thank you very much.

  There is a way to change the module and programmatically updated the IAK file without stopping the VI.  You will need to change the FP read.vi front right by with the constant e/s FieldPoint.  You will need to use the Open FP, FP create Tag, read FP, and close to the public Service.  The trick to this is that you must pre-create files IAK in MAX first.  The way to do is to set up your cart in a configuration and then find devices to MAX.  Then save the iak.  Then reorganize your bottom of basket to the next setting would have desired, then have MAX find devices and who save in a file different iak.  You will need to do this for each configuration you have.  Then, you need to place the code below when you want to Ministry the configuration file.  I have also included a screenshot of MAX that you can see what the strings are correlated with.

  

• Not receive a computer given to nine, but don't know the user name and password

  I got a refurbished computer and I don't know the user name and password. Someone knows what to do?

  * original title - I received a refurbished computer and I don't know the user name and password. Someone knows what to do? *

  Hello

  Reinstall vista

  I'm sorry, but the strategy of microsoft in these forums is that without assistance will be given about lost or forgotten passwords

  read the policy at the link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

  Here are the different ways to reinstall vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  Save all data, because it will be lost, do the above

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• I bought a 6 iPhone as good as new, but inside in Maps application, it has a PIN in other countries, with the full name, phone, address, linked to another address in the city of mi. My suspect is if this is a new feature of relly is a recertificated or mi

  I bought a 6 new iPhone with iOS 9.3.1 system realized by me. But in the app Maps, I found stranger´s information of another person, pinned as well in my country (Uruguay) and the Argentina, including the full name, address and access a address in Montevideo to another in Buenos Aires.

  I Don t know the name or personal information provided here, and I never put there. So, I need to know if I bought a new device or a recertificated and otherwise, maybe stollen.

  Think it is very difficult to understand something, and I want some directions before asking this question to my provider here.

  Obviously, it's not a new phone. Take it to where you bought it. Get your money; Don't let them pass you to another 'new' phone.

• Is it possible to save revenue by program to an excel file without overwriting the previous entry?

  I want to record the revenue of every four hours in an excel file without overwriting the previous entry.  It would work like a button "save under", but instead enter a new name, the name of the recipe as well as the date and time is what the file would be saved under.  Any thoughts on whether this is possible, or how it can be accomplished would be great.

  Everything looks good except for a minor detail that perhaps with that you could help me.  Instead of naming the file "data", I want to use the contents of cell C1 to datatable name.  I could do in the argument Filename = or should I use an expression.

• How to get the full name of the user of the OPS?

  Hi Experts,

  I know we can get the login controller pageContext.getUserName () user name. Is there a simple way/API to get the full name of the user (name, first name) of the OPS?

  Thank you.

  Hello

  USER name and information of the PERSON are two different concepts. You can get the id of user with pageContext.getUserId () connection. In order to get the first name, last name, you must select it from table PER_ALL_PEOPLE_F.

  You can use the sql select and set pUserId of pageContext.getUserId ();

  SELECT FIRST_NAME, LAST_NAME TO PAP PER_ALL_PEOPLE_F, FND_USER FU

  WHEN TRUNC (SYSDATE) BETWEEN PAP. EFFECTIVE_START_DATE AND PAP. EFFECTIVE_END_DATE

  AND FU. EMPLOYEE_ID = PAP. PERSON_ID

  AND FU. User_id =: pUserId

  Anil

• Hi, is it possible in 2014 CC Illustrator to increase the size of Panel of police find so I can see the full name of the police? Thank you

  Hi, is it possible in 2014 CC Illustrator to increase the size of Panel of police find so I can see the full name of the police?

  You can see on the screenshot below fonts with longer names are not displayed, I know you can see an excerpt from the police, but that slows down and me its not practical!

  Concerning

  

  Hi emiltsonev,

  We do not have an option to increase the size of this Panel. You can use the slider on the right to scroll.

  Thank you

  OM

• How to get the full name (device disk) using esxtop?

  Hello

  I am looking for storage settings using esxtop - pressing 'u' for drive.

  As I use the iSCSI (open file server) device, I couldn't see the identifier of the full device. Can someone help me to get this.

  I have attached the screenshot of esxtop for this...

  

  Any idea? Thanks in advance.

  In ESXTOP enter a capital 'L' and type a number to make the larger DEVICE field. Depending on the length of the name of the device - you might need to up to 40 characters to present the full name.

  Entering the '?' in ESXTOP will give you the options you can set (this information is also there as well).

• Crack the full name column

  Hi all
  
  I have to split a column that contains the full name of the person first, middle and last.
  
  I did:
  
  Select alt_accomm_registrations.full_name, substr (full_name, 1, instr (full_name, ' ')) "Firstname."
  substr (full_name, instr (full_name, ' ')) 'Name' alt_accomm_registrations.
  
  
  The problem is somepeople have only put there firstname and some took a first and last, and some have put first, middle and last. Then sometimes, if somebody gave only a first name, it shows in the field of the Suranem?
  
  Published by: oraCraft on 08-Oct-2010 04:41

  Something like...

  SQL> ed
  Wrote file afiedt.buf
  
    1  with t as (select 'Victoria Seymour-Blaauw' as fullname from dual union all
    2             select 'Jennifer Onyewuenyi' from dual union all
    3             select 'Paul William Pitto' from dual union all
    4             select 'Hugh Leddy' from dual union all
    5             select 'Dermot McBrien' from dual union all
    6             select 'Katherine' from dual union all
    7             select 'Fred James Tim Smith' from dual)
    8  --
    9  select regexp_replace(fullname, '^([^ ]+).*$', '\1') as firstname
   10        ,regexp_replace(regexp_replace(fullname,'^[^ ]+ ?'), ' ?[^ ]+$') as middle_names
   11        ,trim(regexp_substr(regexp_replace(fullname,'^[^ ]+ ?'), '(^| )[^ ]+$')) as surname
   12* from t
  SQL> /
  
  FIRSTNAME            MIDDLE_NAMES                   SURNAME
  -------------------- ------------------------------ --------------------
  Victoria                                            Seymour-Blaauw
  Jennifer                                            Onyewuenyi
  Paul                 William                        Pitto
  Hugh                                                Leddy
  Dermot                                              McBrien
  Katherine
  Fred                 James Tim                      Smith
  
  7 rows selected.
  
  SQL>
  

• How to get the full name of the user to a sso.

  Hi all
  
  I am brand new with oracle application server.
  I use oracleAS 10g with SSO enabled. How can I get the full names of the users?
  I know that this information can be obtained with the command 'ldapseach' but I'm looking for information in a view or a package.
  Is it possible to get this information in a view or a package?
  
  Thank you.

  Look at the portal.wwse_api function person_info package
  Maybe it's something similar that you are looking for

• How to save pictures of Photos in the form of files without losing the GPS data?

  Hello!

  Can someone advice me in the following cases:

  I want to erase my Photos from iPhone and iMac. Before that, I wish I had pictures of my library of Photos saved as a regular directory with files. As Windows does, for example.

  Can someone tell me how to save all Photos in the form of files without losing the GPS data? Thank you!

  Just export them (File menu) in unmodified versions.