read only problems with windows 2003

Similar Questions

• problem with windows 2003 vpn servers. and xp pro clients vpn using bridge nic

  I have installed 2 guests windows 2003 on 2 laptops. both are configured with 1 CC of backend and frontend 1 nat/vpn server that has 2 interfaces, a bridge and one configured for host only.

  I configure nat on both servers windows 2003 rras and vpn services and have them connected to my local network. they are able to access internet, ping between them and other computers on the network, as well as the host systems on which they run.

  the problem is that I am not able to connect to the vpn servers remotely from inside a guest virtual machine. I wanted to try a vpn site-to site between the guests 2 windows 2003, but the operation failed.

  I then tested customer to type of a guest virtual computer pro xp vpn server. It is also a failure.

  but I discovered that if I initiate a VPN from any one of the host computer system laptop or another computer on the physical network I am able to connect to the vpn servers I have set up.

  I wish I could have these laptops to operate normally and

  time to time be able to turn on virtual machines with vpn

  servers and test as dfs things and replication active directory as if

  they were running 2 separate real-world offices. the two laptops have invited Setup for 192.168.0.0 networks with subnet mask 255.255.255.192. each host that it supposed to be running a 1 subnet for the popular virtual machine with the servers vpn/nat connect together the 2 sites.

  laptop computers are running xp pro and vista ultimate as the host systems. I'm only using the windows firewall but also tested with them disabled vpn connections. also launches the service ipsec on laptops to secure internal lan traffic, I have also tested with two guests with disabled ipsec.

  is there something I'm missing here with the installation of the vmware bridge network?

  Oh I forgot to mention, I test using pptp and ms-chap v2

  I managed to do work by unchecking the tcp/ip settings and the microsoft file sharing on the bridged NIC resaeau.

  now it works very well but who explain to me why it cannot work when you are using the same network as the host card. they all have two different ip addresses and mac addresses. but something seems to be in conflict

• I don't even know what to call this problem with Windows 7! Can someone please read and help?

  Hi all

  What is c?

  I have half a dozen problems with Windows 7 right now, but let's start with the most irritating.  Screens disappear and reappear.

  I'll open a window and then open another (at the same time) for a reason, and if I don't have my mouse entirely on whatever the window, it "disappears".  That is, it will become transparent with just sort of 'framework' around him.  The content is gone.  But they come back.  It makes the idea behind 'Windows' laughable.

  And try to block and the copy is a nightmare of one window to the other.  Or even on the same page.  I try to block something and move away, and the "block" disappears.

  I thought it might be my mouse, which is your ordinary Microsoft Optical Mouse 2V.0, I went to devices and printers and formatted my mouse (I've never done this before) and my Microsoft Keyboard and recorded.  Nothing wrong with the keyboard.  The mouse just kept screwing as it did before, and I used your basic standard settings - nothing fancy or different.

  Now I write in this little place and nothing is to move, the mouse behaves - what IS IT?

  I am getting this problem in Windows 7 because honestly, I have no idea where else to put it.

  And I have just started with the problems.  Can you please, please, please help?

  I can't help but think that all the problems are related, so I'll put one little summary of what else is happening.

  1 out of nowhere part, I got a notice saying that I had to change the settings to allow Windows update immediately and without my permission (I think that's what he said and I know that there is a setting in devices and printers? or something like that where I allow edits without review)

  2. I can't convince my printer there is NO residential group and that I am the administrator and the only person using the computer.  This screw with my settings (wired) network too.

  3. I have a four-in-one printer (print, copy, scan and fax).  I am at home lately and will be years apparently, so I decided that I wanted to get the printer scanner and fax.  He was already printing and copying.  I turned off, unplugged and did not know that I had to uninstall all software and then reinstall it.  I don't have the time to do it again; I want a clean computer before you set up the printer.  Well, it seems to create small problems in the world.  I keep getting directed to devices and printers, but I want to read all the information before I uninstall just in case.

  4 modules!  They are the bane of my existence.  I do not understand what they are doing when I go and look at them individually. I tried to use IE10 without addons and it's just a big headache.

  5 constantly getting a yellow banner at the bottom of my screen asking me if I want to run * some * and I wanted to know the risks involved.

  6. constantly asked about Active X.  What is it and what does want of me?

  7. all of a sudden an hour ago, my computer has decided to go to "sleep" mode and wants me to change user for myself and when I do, it says it is locked, but I hit the beautiful image and it opens on the regular Windows screen.  WHY?  I don't use a screen saver and I got 20 minutes sleep mode which is just the entire dark screen until I touch the mouse.  No more!

  Guys do you see why I'm going crazy?  Help, please!  I spend all my days this last week and one before that trying to move things.  All this because I wanted my printer to scan.

  ···
  I'll open a window and then open another (at the same time) for a reason, and if I don't have my mouse entirely on whatever the window, it "disappears".  That is, it will become transparent with just sort of 'framework' around him.  The content is gone.  But they come back.  It makes the idea behind 'Windows' laughable.

  ···

  ^{Click Start or press the Windows key and type mouse but do not hit Enter. Search change how your mouse above control panel section.}

  ^{When this new pane opens, uncheck the Activate a window by hovering over it with the mouse. Click OK at the bottom to save your changes.}

• Common problem with Windows 7, what causes errors with itunes, the software adobe reader, TurboTax 12

  Is there a common problem with Windows 7, what causes errors with itunes, the software adobe reader, TurboTax 12?  I get error messages when I try to use one of these programs

  Hello

  Thanks for the reply with the details.
   
  Problem with opening PDF documents, please see the link and follow the steps in the article:
   
  Error "Windows cannot access the specified device, path or file" when you try to install, update or launch a program or file
  http://support.Microsoft.com/kb/2669244#top
  Important: Disable your antivirus or changed settings can make your PC vulnerable to viral, fraudulent, or malicious attacks. Microsoft does not recommend that you disable your antivirus software or change settings. If you need to temporarily disable your anti-virus software, you should reactivate as soon as you are finished.
   
  See the link for the question with idevices:
   
  iTunes for Windows: "Could not load the data class" or "Cannot load provider data" alert synchronization services
  http://support.Apple.com/kb/TS2690
   
  Problem with TurboTax 12, check out the links and follow the steps:
  http://TurboTax.Intuit.com/support/IQ/install-product/reinstalling-the--NET-Framework/GEN12673.html
   
  5639 error: Cannot configure the product update system
  http://TurboTax.Intuit.com/support/IQ/update-product/error-5639--can-t-configure-product-update-system/SLN12386.html
   
  http://TurboTax.Intuit.com/support/IQ/install-product/Troubleshoot-installing-and-running-TurboTax--Windows-/SLN63018.html
   
  If the troubleshooting steps above do not help, check in a new user account:
  Reference:
  http://Windows.Microsoft.com/en-in/Windows7/create-a-user-account
   
  If it works in the new user account, then the current may be corrupt user account.
  To fix the damaged user account, follow the steps in the following article:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Adobe Reader 5.0 with Windows 7 compatibility problem

  Adobe Reader 5.0 with Windows 7 compatibility problem

  version 5?

  use the most recent Adobe Acrobat Reader DC install for all versions

  Clear mcafee, unless you are sure you want.

• Problem with windows update and Service pack 1 for Vista 32 bit.

  A screen will appear that says I need to download the Service Pack 1 for Vista. He also says that it is more optimal to download the much smaller file, through Windows Update, rather than on the site. But when I check the Windows Update, it did not for me to download. Update verification that history does not display it has been downloaded before, even if the other Windows updates have been. Do I need? Should I download the version + 400 MB of site or there at - it another way to download smaller files for my PC only? Any help appreciated. Thank you! Here is the text I copied and pasted pop up I got.

  ------------------------------------------------------------------------------------
   
  A problem with Windows Vista
  Windows Vista has stopped working properly.

  This problem has been corrected in Windows Vista Service Pack 1 (SP1).

  What is a service pack?

  An update to software that combines new security and performance with existing updates improvements. Service packs can contain new features or changes to the design of a product.

  To resolve this issue, follow these steps:
  Determine if your type of operating system 32-bit or 64-bit.

  How will I know if my system type is 32-bit or 64-bit?

  Click the Start button, right-click computer, and then click Properties.

  Under system, you can view the system type.

  The average of 32-bit and 64-bit?

  Both 32-bit and 64-bit refer manner that your computer (CPU) CPU processes information. The 32-bit versions and 64-bit Windows are designed for use in computers with 32-bit processors or 64-bit, respectively.

  For more information, go online and read this article for Windows Vista online help:

  32-bit and 64-bit Windows: frequently asked questions

  Check online at Microsoft Download Center to download and install Windows Vista Service Pack 1:

  Windows Vista Service Pack 1 for 32-bit systems
  Windows Vista Service Pack 1 for 64-bit systems
   
  -------------------------------------------------------------------------------

  In the end, P.S. - know what long and thank you in advance for taking the time to read and respond.

  In addition, unrelated question. Does anyone know why my computer would always have an icon in the lower right shows a storage device mass that I did not and when nothing is plugged into ONE of my USB remove locations?

  Ralleny,
  Regarding mass storage disks that appear, you have housing of memory card reader on your PC?  Usually they will appear like this.  I have a HP at home that has a Bay of 5 card reader to the front and I see the same type of items that you see. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The problem with Windows update - automatic updates service won't start not (error 126)

  original title: the problem with Windows update

  Please help me to get Windows Update operational return.

  XP Media Center Edition, Version 2002, SP3

  Had a problem with "Generic host process for Win32 has encountered a problem and needs to close."  Follow-up of the instructions on this link:
  http://support.Microsoft.com/kb/931852

  Seems to have cleared the error message.  So far so good.

  However, now a Windows Update does not work.  Security Center Windows were told to go to control panel > system and use the Automatic Updates tab.  But, if I go to control panel > system, the Automatic Updates tab does not appear.

  I also went to the control panel > Services.  Tried to start the automatic updates service.  Received this error message: could not start the service automatic updates on Local computer.  Error 126: The specified module could not be found

  I already followed several instructions on this subject:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cannot-access-Windows-automatic-update-after/aeaec175-01f4-47ed-8F97-55b854af4220

  In the thread above, I was following the post on 30 August.  According to Option A, I completed step 5 for the uninstallation of McAfee Security.  At this time, my network card has stopped working.  On the recommendation of the officer, I posted to the Malwarebytes forum.  The officer determined Malwarebytes that I don't have a malicious software.  I ended up posting on forum McAfee to get my network card works again.  Then I reinstalled McAfee and start to run Windows Update.

  I started with Option A, step 8 to reset Internet Explorer using http://support.microsoft.com/kb/923737.  The difficulty it has worked very well.

  Then Option A, step 9 says reset Windows Update using http://support.microsoft.com/kb/971058.  When I ran the difficulty in default or aggressive mode, I got an error message saying: he cannot start wuauserv.  The message asks me to verify that the user has privileges to take this step.  Well, I checked through user accounts who am the only one user set up on this PC and I have administrator privileges.  Help me please run this difficulty or recommend another way to get Windows Update works again.

  [1]... looks like you are saying that my system is so wet that a clean install is the (only?) way to go.

  [2] if I do a clean install, not only what I need to reinstall Windows and all my applications, I also have to reinstall the drivers... Etc. ?

  [3] I think I have the disks supplied with the PC system. Is it better to use than to use the recovery partitiion?

  [4A]... is there a possibility that some of [my data are] infected?

  [4] preventing me from simply infect the whole PC again?

  A1. Yes, and it was my recommendation in August, too.

  A2. Yes.

  A3. Only not really well using the restore Partition hidden to make the "destructive recovery" will include all drivers, etc., that have been installed at the factory.

  A4a. Yes, a real possibility.

  A4b. You run at least three 3 tests on the backup data before restoring one (1) with your installed & updated up-to-date anti-virus application (for example, Microsoft Security Essentials) and two 2 with good reputation, free online scans (e.g., ESET;) Bit Defender; Kaspersky; HouseCall; (F - Secure).

  If you have saved your data on CD/DVD, the disc scanner. If you have backed up your data to a flash drive, SD card, or another external drive AND KB971029 is installed, analyze the drive.

  If you have any questions or need additional help, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  Once again, good luck!

• Error message - it only works with Windows Media Player for Windows XP when trying to convert playlists to Excel.

  Original title: windows media player 11 trouble conversion playlists to Excel after obtaining bonus pack.

  I downloaded the bonus pack, everything works well except the library management wizard. Comes with the message that it only works with Windows Media Player for XP only. I am currently running windows xp edition family and windows media player 11.  Help, please.

  Hello

  You can follow this link & check if the problem persists:

  How to export a playlist in Windows Media Player?

  Hope the helps of information.
  Please post back and we do know.

• Connection problem with Windows Live

  Recently, a change has been introduced whereby it asked me to confirm my mobile number so that MS can send me a verification code that fits into a security process probably intended to check my Windows Live Sign On, however, it happens that it is not possible to select a mobile phone in my country (Malta, European Union).

  I would also like to point out that even though I select Remember me, remember my password within logon, Windows Live Messenger still brings me my username and password for my Windows Live ID account (* address email is removed from the privacy *); This is why does not remember my login credentials.  This happens on my laptop running Win XP SP3.
  
  I also noticed that I am getting a problem of logon failure, when I try to login to my HP iPAQ which runs on Windows Mobile 2003.
  Hi Emil_d76,
   
  I recommend you post your query in Windows Live Messenger Forums for assistance with this issue.
   
  For the problem with Windows Mobile, post your query in Windows Phone Forums.

• Problems with Windows Installer after using System Mechanic.

  I had a problem with my Dell 2 years and was told by the Support Dell buy iolo System Mechanic. However, now I have problems with Windows Installer (it is not installed correctly) and I've read that this can be caused by the registry cleaner in the iolo System Mechanic.

  So, really two questions: 1. do I need iolo System Mechanic? 2. how to correctly install Windows Installer?

  Thank you!

  original title: Registry Cleaner/Windows Installer

  So, really two questions: 1. do I need iolo System Mechanic? 2. how to correctly install Windows Installer?

  1 no, the registry cleaners can give you immediate relief, but they are a big pain in the long term.

  2. follow the four methods listed in the resolution section of the following article:

  http://support.Microsoft.com/kb/2642495

• Printing problems with Windows 7

  Since moving to Windows 7, I have problems printing.  What you see is not what you get.  For all programs (Word, Excel, Access) - the info is being printed as if it is printing on a 8.25 x 10.25 instead of 8 x 11 paper size.  I can't print labels because they don't properly space.  NOT SATISFIED WITH WINDOWS 7!

  Friday, April 16, 2010, 05:07:16 + 0000, DeeCaci wrote:

  > Since moving to Windows 7, I have problems printing. What you see is not what you get. For all programs (Word, Excel, Access) - the info is being printed as if it is printing on a 8.25 x 10.25 instead of 8 x 11 paper size. I can't print labels because they don't properly space. NOT SATISFIED WITH WINDOWS 7!

  If you're happy with Windows 7 is of course your choice.
  but I would point out that the problem you are experiencing is not a problem
  with Windows 7. The problem is with the driver that you use for your
  printer (and drivers are written by the printer manufacturers, not by)
  (Microsoft). Either you have the wrong driver or the driver has bugs
  it. or you can use the wrong driver.

  It's just a guess, but my guess is that you have the wrong driver.
  Check with the manufacturer of your printer, either by phone or on their web
  site for the right pair.
  Ken Blake, Microsoft MVP (Windows desktop experience) since 2003
  Ken Blake

• Problems with Windows Installer - installer stops and shows the dialog on the command prompts

  Hello

  I hope someone can help me with this question... I looked long and seriously, and you have tried all of the suggestions posted (cancel/save, etc.).

  I am trying to install a program and Windows Installer stops right in the middle of installation and a dialog box appears with information from command line, and the only thing I can do is select 'ok'... the program is not installed.

  Here is the info that appears in the dialog box:

  Windows® Installer. V 5.0.7601.17514

  msiexec/option [optional parameter]

  Installation options
   
  Installs or configures a product
  /a
  Administrative installation - installs a product on the network
  /j [/t ] [/g ]
  Publishes a product - m for all users, allows the current user
   
  Uninstalls the product
  Display options
  / quiet
  Quiet mode, no user interaction
  / passive
  Automatic mode - only progress bar
  / q [n | b | r | f]
  Sets the user interface level
  n no user interface
  b Basic UI
  r reduced UI
  f-full UI (default)
  / Help
  Help information
  Restart options
  /norestart
  Do not restart after the installation is complete
  /promptrestart
  Prompts the user to restart if necessary
  /forcerestart
  Always restarts the computer after installation
  Logging options
  / l [I | w | e | a | r | u | c | m | o | p | v | x | + |. | *]
  i status messages
  w warnings recoverable
  e-all error messages
  a startup of actions
  r registers of the specific action of the
  u user requests
  c initial UI parameters
  m out-of-memory or fatal exit information
  o disk out-of-space messages
  p - Terminal properties
  v performance
  x extra debugging information
  + - Add to the existing log file
  ! -Flush each line in the log
  * - Log all information, except the x and v options
  / log
  Equivalent of / l *.
  Update options
  / Update [; Update2.msp]
  Apply updates
  / uninstall [; Update2.msp] / package
  Remove the updates of a product
  Repair options
  /f [p | e | c | m | s | o | d | a | u: v]
  Repairs a product
  p only if the file is missing
  o If the file is missing or an earlier version is installed (by default)
  e If the file is missing or an equal or higher version is installed
  d if the file is missing or a different version is installed
  c If the file is missing or checksum does not match the calculated value
  has all the files to reinstall the forces
  u all (default) user-specific registry entries
  m all requirements (by default) computer-specific registry entries
  s all (default) shortcuts
  v-runs from source and recaches local package
  Setting public properties
  [PROPERTY = PropertyValue]

  Consult the SDK Windows® install to get additional documentation on the
  command line syntax.

  Copyright © Microsoft Corporation. All rights reserved.
  Portions of this software are based in part on the work of the Independent JPEG Group.

  I hope someone has a suggestion for this problem... I just bought a new laptop and Windows 7 Professional came installed on it.

  Thank you

  Linney thanks for your response!

  The file I'm trying to install is an exe file (so the SIG file is embedded in the exe file).

  I tried the option "Run As Administrator" and it did not work.  However, you gave me an idea that has provided a work around that allowed me to install the program.

  Once this dialog box is displayed with all the control switches, rather than press 'OK', I left on the screen and went in the 'temp' folder and find the MSI program I tried to install (I cross referenced the timestamp of when I tried to install it to find).

  Once I found the updated file, I clicked it, and he proceeded to install the program... I have not had any other problems with the installation.

  So, there's something wrong with the way that the exe file have been created and how the files extracted from the msi file (these are files of Intel and Lenovo - driver updates - so I think they do these things) or there is a problem with Windows Installer.

  For now, at least, I have a work around I use until I find a solution to this problem of permanent

  Thanks for your help and for taking the time to answer!

  I hope this can help someone else in the future

• Dual monitor boot problem with Windows 7 Professional 64 bit after installation of any graphics program like a game.

  I have built this platform with the help of the owner of a store of 4 cumputer teir 2 years ago. We initially put Windows Vista 32 bit on the system to Vista 64 bit unstable atm. For 2 years, the computer worked like a dream. Last week I made a clean wipe of windows vista and windows 7 professional 64-bit installed. The system has two monitors. The primary monitor is a sony bravia with 26 "led and secondary for watching movies is that a 55 '' led Samsung 1080 p 240 Hz. The graphics card is a geforce GTX 295 nividia. It has 12 GB of Ram and the CPU is an i7 965 @3.20.

  The problem I have is this. After the installation of any game average to work with windows 7, the screens to reset their resolutions automatically more than a few times as they are confused. Sometimes, I have to return the screen to its correct resolution after installation in full. Most of the games and then run fine. After installing the game or any game designed for win 7 startup of computers is all messed up for the monitors. After starting hand 26 "sets its resolution and then after about a second 30 pause the computer makes the sound (the double) that it is resolutuons to reset monitor again? After that this second reset about 1-2 minutes the computer is good to go, unless it sets the res evil. The problem is the computer has never done that with vista and it is very annoying say the least. It still freezes the installation of some games. The only way to resolve what I found is the restoration of the system. The computer starts normally and screen ground is defined once she has always been. The only problem is when you install another game, the problem is their new. This problem is worse in some games.

  The latest nvidia drivers have been installed. There is no conflict in the device with the exception of an old printer Manager. The two comes is set to 60 hertz. I searched all over the internet and there seems to be a problem with windows 7 without solution. I am at a loss. Any other information that you need let me know and I'll post it. Thank you!

  Hi ancientone618,

  It sounds almost as if there is a Windows update that is in conflict with your NVIDIA Driver Installer.  I would say to disable automatic updates of Windows to see if it might help:

  http://Windows.Microsoft.com/en-us/Windows7/turn-automatic-updating-on-or-off

  In addition, please see the article with some useful information:

  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Having a problem with Windows Live Mail lock up shortly after the start.

  Having a problem with Windows Live Mail lock up shortly after the start. When I start the Task Manager to end the process, it sometimes freezes and the only way to solve the problem is to disconnect which forces the profile to close. Assuming a corrupted profile, I followed the instructions of Windows support to fix a corrupted profile and copied all the files except ntuser.*. When I try to paste them into the new user profile (all profiles are admins), I get the error message asking if I want to leave to proceed. When I click on continue, all THE files in the profile block "corrupt" to the new one, including ntuser.*, that I was not choosing. Why? If the files are rewritten empty? Tried 3 times, same result. Please notify.

  I think I found it! I went in the Windows Live Forum and found a thread that looked like my problem. He suggested going to msconfig and take off Live Mail list start. I couldn't find it on the list, but the top element was "" default EXE"something of an unknown manufacturer. I took it out of the startup list, and Live Mail works again! Thanks for your help!

• Problem with windows Explorer, getting the error Windows Explorer has stopped working.

  I have a problem with windows Explorer (windows 7 OS) - the causes of each click on the right button of the mouse on the desktop icons to convey a message "Windows Explorer has stopped working. Windows Explorer restarts. How to solve this problem?

  Thank you

  Miodrag

  Thank you very, very much... I solved my problem by uninstalling the software "daemon tools".
  I have only Microsoft Security Essentials antivirus, is it necessarily to install another antivirus software?