read S.M.A.R.T. in PERC H710 Mini disc?

Similar Questions

• Dell PowerEdgh R420 and PERC H710 mini RAID setup

  Hello

  I'm a little new to the RAID configuration.

  I have 4 hard drives SATA, 2 1 TB HARD drive and 2 2 TB HARD drive. I just want my 1 TB on a RAID 1.

  When I did, I couldn't find the 2 x 2 TB of HARD drive.

  Is it possible to access the other 2 HARD disk when they are connected to a controller?

  I think I understand what you're getting now.  You are unwilling to LOOT the other two drives of 2 TB. So, what you see is correct. The operating system will not show other readers because they must be configured in RAID if they are logged as such.  You will need to create them individually as long as two separate RAID 0 VD.

  Then you will see the BIOS RAID PERC of the VD 3 total.

  VD0 - OS RAID1 (disks 0 & 1)
  VD1-RAID 0 (disk 2)
  Vd2-RAID 0 (disk 3)

  In Windows disk management, you also them as 3 separate logical drives that you can work with.

• Divide a virtual disk in two virtual disks PERC H710

  Hello guys,.

  -We have a server PowerEdge R720 with a PERC H710 Mini storage controller which has 8 drives 1 TB each of them.

  -We have created a virtual disc, which includes 8 physical disks configured in Raid 5.

  -We have installed Windows 2008 Server R2 and we got 4469 GB no allocated space that we cannot use due to the limitation of the disks of the Basic.

  

  What we really want to do is reclaim the unallocated space of the existing virtual drive and put it in a new one, so that we keep 3 disks for the virtual disk 0 and we use the 5 others for the new virtual disk 1.

  -Is that possible without destroying the data we have?

  -Help please!

  Thanks in advance and sorry for the bad English :(

  Unfortunately, there is no way to do it without restarting.

  Option 1

  What you have described, you could divide drives upward into distinct from VD, leaving a 2 TB or smaller for the operating system.  It will cost you a value of an extra disk to disk space (VD0 RAID 5 = 2 TB, VD1 RAID 5 = 4 TB).

  Option 2

  You can create "slices" on the disks - you still all 8 disks in a disk group, but you would cut a smaller VD for the OS, and then the rest of the disc space can be a VD for data (each VD will appear as a "separate" disk in Windows, so the second VFD can be converted to GPT and be as big as you want While the first VFD remains an MBR disk to boot into the operating system in BIOS mode.  This will give you return a value from an extra disk to disk space over Option 1 (VD0 RAID 5 = 100 GB, RAID 5 = 6.9 to VD1).

  Option 3

  You can switch mode UEFI, create a VD with all 8 disks (as you did), convert the GPT disk, then install.  UEFI is necessary at the start of the GPT disks and GPT is required for disks larger than 2 TB.  It would also keep 7 TB of usable disk space.

  You can also consider a RAID 6, if you can accept the value of another drive 1 TB of disk space.  Since a reconstruction of the drive may take 1 to 2 days or more, a RAID 6 would provide better tolerance to failures and protection during the vulnerable period that the disc is out of line or reconstruction.

• Reference DELL T420 - battery on PERC H710 adapter controller

  Hello

  I received a yellow warning

  Reference DELL T420 'Battery on PERC H710 adapter controller'

  What it means?

  What should I do?

  Order the new battery?

  It is a simple replacement mission?

  Is it essential?

  Update:

  test URL

  http://www.Dell.com/support/article/us/en/04/SLN130018

  Have nothing, everything seems fine now...

  Thank you

  It is normal so he can make a full discharge of the battery as part of his learning cycle every 90 days. Make sure that this isn't that. If this isn't the case, the reason, give it 24 hours. If it is fully charged, update the system (including RAID firmware, driver first) firmware. If not fully charged yet or it reproduces quickly, then replace the battery - power down to replace.

• R320 substituting PERC S110 for a PERC H710 - without loss of data

  I think of his replacement (added?) a H710 PERC our R320.  The vehicle currently has a S110 (software raid controller?).

  Play safe I'll have a complete bare metal backup.

  Is it possible to add a PERC H710 with my original two disks in RAID 1 and do not go through a complete reinstallation or backup recovery?

  It would make life so less irritating...

  Thanks in advance!

  Sincerely,

  Chris H.

  Hi cmhippy, yes you certainly would need back up you data, it is not possible to transfer RAID configurations of a software to a hardware RAID controller RAID controller.

• Cable for T320 8x3.5 to Perc H710

  I have a T320 with backplane replaceable 8x3.5 SAS drives hot. I ordered a Perc H710 (p/n 342-4203) to replace the H310. The SAS cable has the wrong connectors for the H710.

  I chatted with Dell this morning and they told me that I needed the manufacturer Dell cy7n1. I ordered this. However, after ordering, I searched online and the images seem to show a cable with only one connector at each end.

  What is the correct cable I need?

  Thank you.

  Hello

  CY7N1 is a cable to connect to a backplane 4HDD. Background cable basket of 8HDD is DJXF7.

  Thank you

• Where the PERC H330 Mini 25.4.0.0011 firmware?

  I installed OMSA 8.3 week last on a brand new R430 with all the latest available firmware upgrades applied.

  Despite this, the server notifies:

  "The current version of the firmware 25.3.0.0016 is earlier than the version required 25.4.0.0011 for Controller 0 (PERC H330 Mini).

  I tried the Dell downloads for the 25.4.0.0011 & driver version without a bit of luck.

  Can someone point me in the right direction?

  Hello

  There was a problem with this version of firmware. We have learned from the download site. 25.3.0.0016 is the version that is currently available.

  25.4.0.0011 probably won't. A new version that fixes the problems of fate in his place. If you do not want to wait the new FW version or a new version of the OMSA to get rid of the update notification, you can change the file version. In your installation of OMSA directory there is a file called lsiver.cfg. The current version information is stored in this file. The default installation directory should be something like:

  c:/program files/dell/sysmgt/sm/cfg

  The file must be located in this directory. If you open the file with Notepad and search for H330, you should be able to locate the H330 current firmware version information. There are several H330 controllers. If you don't know what controller you are using, you can change all the 25.3.0.0016 or you can just change the controller you are using. I think that there are three different H330s appear in this file.

  Thank you

• Error - Windows cannot read the disk in drive F:\-Assurez-vous that the disc uses a format Windows recognizes. If the drive is not formatted, you must format it before you use it

  Original title - Windows cannot read blank disc

  When I insert a blank DVD-R disc for burning, an error is indicated - "Windows cannot read the disk in drive F:\-Assurez-vous that the disc uses a format Windows recognizes." If the drive is not formatted, you must format it before you use it. "So I can't burn a DVD-R disc... But if I use the DVD-RW drive, it can be burned smoothly without any problems... Windows cannot recognize only the DVD-R disc... My DVD - RW driver is Sony Optiarc AD - 7280S. When I use Windows 7 without problem was found in the burning a DVD-R disc. But after using Windows 8, I can't burn a DVD-R disc. So please help me...

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you have a problem with the disc.

  As you mentioned that you have tried the steps of troubleshooting mentioned in this thread.

  I suggest you run the Fix-it tool and check if it helps.

  This tool diagnosis and repair CD or DVD drive issues, when you can not burn or play CD or DVD discs when a disc is not found, not available or not connected.

  See the link below.
  https://support.Microsoft.com/en-us/mats/cd_dvd_drive_problems?WA=wsignin1.0

  As we have tried most of the troubleshooting steps to resolve this problem, and if the problem persists after you run the tool fix - it also. So, I suggest to get in contact with equipment manufacturers , because they will be the best person to help you.

  Hope this information helps. Please let us know if you need additional assistance. We will be happy to help you.

• PERC H710 options

  Just got a PowerEdge T320 with controller Perc H710. There are a few configuration options undocumented in the help manual, or online. Cannot find anything on the web as well. It is "set the speed of the link to G3" and "Disk Cache". What are doing? And how to configure them, taking into account that the server will run Windows server 2008 R2?

  Simon

  Probably best to leave 'Disk Cache' disabled... the controller uses a battery backup cache, so if the system loses power, the unwritten data is kept in the cache.  Disk cache HARD disc has NO protection, so if the power is lost on the server, data not written to the disk cache will be lost, causing corruption.  This should be used if you have taken extraordinary measures to ensure that the system never loses power (or the integrity of the data is not critical).

  I can't that guess the 'Set Link Speed to G3' might actually be 3G, which means she restricted protocols of flow to 3 Gbps (SATA II/SAS I) instead of the 6 GB/s (SATA III/SAS II) that he is capable of.  If you use the appropriate drives (SAS or enterprise SATA II/III), there should not be any reason to enable this, because it's probably a compatibility setting for SATA I / II of readers whose speed cannot be used correctly with the controller, but if you use decent readers, that shouldn't be a problem.

• Disabled option to create new VD - PERC H710

  I have 5 x 1 TB SATA RAID-5, works very well. My goal is to add new SAS drive 2 x 3 TB RAID-0 having.

  Two issues I found.

  1 - new record added shown State as foreign menu PD Mgmt.

  2 - the 'Create new VD' option is disabled or grayed out. Why?.

  Thank you.

  -Type of server Dell PowerEdge R720

  CONTRL - RAID PERC H710

  1. the foreign configuration must first be deleted. VD MGMT, F2, foreign, clear.

  2. create is disabled because the disks are foreign and not available for use.

• PERC H710 downloads?

  Page drivers and downloads for my T320 doesn't seem to understand anything for the Perc H710 RAID controller I.  I searched Dell support site and did not find a relevant page.

  Where can I find updated firmware to date and any other software that I might want to use to keep the controller to update?

  Thank you

  Andrew

  They are under SAS RAID.  Here is the firmware:

  http://www.Dell.com/support/drivers/us/en/04/DriverDetails/product/PowerEdge-T320?driverId=DK9F9&osCode=WS8R2&FILEID=3188832303&LanguageCode=en&CategoryID=SF

  What OS?

  Keep the OMSA (OpenManage Server Administrator) to update will inform you when the firmware/drivers are obsolete:

  http://www.Dell.com/support/drivers/us/en/04/DriverDetails/product/PowerEdge-T320?driverId=CWHRG&osCode=WS8R2&FILEID=3267736217&LanguageCode=en&CategoryID=SM

  (Download and run to extract the files, and then run C:\Openmanage\windows\setup.exe, add yourservernameoripaddress:1311 to the Intranet Zone of IE).

• DVD reads not properly: Medieval 2 will start no more (original disc)

  Hi everyone, sorry if I write this in the wrong part of the site, but I really need help with something. I bought a new pc game (Medieval 2 Total War) and when I 1st installed, everything worked fine. The next day I went to play again and when I clicked on the icon of the DVD player has started and the disc was being read. The problem was an error message saying that I need to insert the right disk when it is clearly stated on the manual 1 CD has been kept in the drive. Can someone tell me why he was working one minute then the next saying that my drive does not exist please? I tried to reinstall and everything, but the same message appears again and again. Any suggestions please?

  Thanks in advance
  David

  Hello David

  It will be interesting to know what model of laptop you have.

  By the way: try to disable the DLA to packet writing software. Maybe it helps.
  Modification of a DLA installation procedure is as follows:
  1. open Windows Explorer
  2. right click on the CD/DVD drive icon and choose Properties
  3 click the DLA tab
  4. to disable DLA option erase DLA activate on your box of readers

  Please let me know if it works.

• Can not read the word file copied as a shortcut on a disc

  Format microsoft word copied as a shocut on a disk is not able to be read. An error message appears that the network connection or the driver that the shortcut refers to is unavailable.

  Please excuse my rudeness and gaiety that, but everything that you copied is the shortcut, not the file. If you attach the drive to your PC, it will find the file because the shortcut will direct you to the source file, but if you try to play the file on another PC the source isn't there.

  If you do not know where the file is stored pass on the original PC, right click the shortcut and go to properties and it displays the path of the target, because it is a Word file, the entire file is probably in the Documents. In the same box, you should be able to target location or find to open the file. When you locate the file copy on the external drive.

• Updated full M610/620 PERC H310 Mini RAID 1 disk

  I have 8 servers in my M1000e chassis.  They have all two drives 146 GB in Raid-1.  Just got in a boat load of 600GO drives gently used off PE R630 servers who are re-designed in a laboratory.

  I would like to replace all the records with the largest, with minimal downtime and no data loss.

  Advice? Tips? Advice?  Everything would be extremely appreciated before I mess up and make + 400 users very angry with me...

  Hello.

  It is possible to perform this operation with minimal downtime. Ensure that you have a backup validates your data just to be safe. You can do this by deleting every old hard drive and replacing with 600 GB disk, one at a time. Let the new drive to rebuild completely before replacing the other. You can monitor the progress of the reconstruction in OpenManage Server Administrator (OMSA) if installed. Clear the foreign configuration if it appears on the disc, if the drive rebuilt and state LOAN ; assign as a Global hot spare.

  You will notice that the total capacity of the virtual disk (VD) will not 600GO, because there will be unused space on the disks. You will use the property capacity expansion (OCE) online from your controller to claim unused space. In OMSA, GB storage-> PERC H310-> virtual disk-> available-> Reconfigure tasks-> capacity and continue. Under RAID level, select RAID 1 and enter 100 to recover any space unused on the disks and continue. See schematic illustration below:

  

  

  Let me know if you need additional assistance.

• PERC H710P Mini may not increase storage

  Hello, im trying to develop the existing Raid 6 storage. I've added 4 new drives and they are listed as loan. However, in Volume, it has no other choice to reconfigure. What Miss me? I read that only Raid 10, 50, 60 cannot be increased...

  Ah... it's because you have several bays in the same set of disks (called "slice"). You cannot reconfigure arrays in slices. You will need to do a backup/restore or remove the second VFD to expand / reconfigure.