Read the question using the first book (snow leopard) mac pro

Similar Questions

• I have 10 items.  I'm trying to update camera raw plug so it will read the first lines of a 7dmarkii shot. I can't find where to put them to update to the latest version of 8.7.  If someone could please point me in the right direction.  Thank you very muc

  I have 10 items.  I'm trying to update camera raw plug so it will read the first lines of a 7dmarkii shot. I can't find where to put them to update to the latest version of 8.7.  If someone could please point me in the right direction, I would really appreciate it!

  Normally, I shoot with the 7dmarki and have never had any problems.  After troubleshooting my error message 'cannot open IMG1111 because it's the wrong file type', only the options have been updated plugin raw from the camera, to buy the latest version or uninstall and reinstall.  First train to the plugin to update because it was a leased device.  Thanks again!

  Thanks MichelBParis!  I didn't see where he said to 12 items.  I downloaded the free DNG Converter last night and not had much luck.  It is not recognizing that I have all files in the folder at all.  Don't know what I'm doing wrong!

• I bought CS4 - have the box etc serial # - use an IMac with Snow Leopard - went to use the bridge and a screen came saying Adobe Bridge HOme Service was interrupted to concentrate on other resources... uh, I bought this software and how can we now

  I bought CS4 - have the box etc serial # - use an IMac with Snow Leopard - went to use the bridge and a screen came saying Adobe Bridge HOme Service has been discontinued for focus on other resources... uh, I bought this software and how it can now be 'gone '? Pls help - bridge is very convenient and I paid for it!

  See here:

  Deleted Adobe Bridge Home service

• I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  1. did you remove Bootcamp using disk utility?

  2 have you tried local restore or recovery of the Internet? - OS X: on OS X Recovery - Apple Support . Mac with built-in optical drives may need 'Gray' disks to boot the system.

• Can I put the Mountain Lion Snow Leopard?  Where can I download Mountain Lion?

  Can I put the Mountain Lion Snow Leopard?  Where can I download Mountain Lion?  I don't wan to upgrade all the way to El Capitan.  Some of my software may not be compatible.

  http://www.Apple.com/shop/product/D6377Z/A/OS-x-mountain-lion

  You should have a complete backup of your system before performing an upgrade. Given that, we risk minimum trying to El Capitan before adopting it. Instead of spending $20 on the Mountain Lion, when El Capitan is much higher.

  There are not many apps running in Cougar and El Capitan.

  Compatibility lists: http://roaringapps.com/apps

• J6450 will not scan since the upgrade to snow leopard

  My J6450 will not scan since the upgrade to snow leopard. I can print fine but when I try and scan is says sorry, scanner could not be initialized (Scanner not found.)

  You scan the front of the unit?  The software included in Sl does not support that.  Also note the HP Scan Pro included in the 10.5 software will not work with 10.6.  The 10.5 software and delete the print queue.  Make sure your 10.6 is update 10.6.1 and go here to download and install the HP software for 10.6 and Setup for your J6540.  You should be able to scan after that.

• White lines appear on the videos from my new Mac Pro - why?

  Hello

  I am the proud owner of a Mac Pro 2.7 GHz 12 - Core Intel Xeon E5 / 64 gig RAM / 2 X AMD over-pants D700 6144 MB running on OS X 10.9.3 (13 D 65).

  I use the last CC version, but also Red Giant Magic Bullet LOOKS to color grade my videos (on an adjustment layer). I have 3 HDD (1 SSD in the computer with the programs + 1 external (Thunderbold) G-RAID for cache files + 1 external Pegasus R6 2 (Thunderbolt 2) for images).

  Sometimes, when reading (but more often during export into Media Encoder) white lines appear on the video (see image below). Why?

  Is this a problem first? Is something wrong with my Mac? I reinstalled everything from scratch but the problem remains...

  I worked with the same programs on my previous iMac and I didn't have this problem.

  Any idea?

  

  Nicolas.Olivier wrote:

  Sometimes, when reading (but more often during export into Media Encoder) white lines appear on the video (see image below). Why?

  It is a problem that is known at this stage and is still under investigation by the folks at Adobe.  As they work through it, move your projects to the software rendering and move the SOUL to software exports.  It may take longer to work through things, but you avoid the strange lines.

• CS5 will still support the MCE Blu - ray on Mac Pro Player?

  It's basically my question:

  CS5 will still support the MCE Blu - ray on Mac Pro Player?

  It is y harly any info the hardware on the web site of Adobe support more. It's just all hype sales!  They used to tell you which disks have been supported, but now that still seems to just be an afterthought in CS5, there is not ehardware in detail everything that is taken in charge and what is not...

  This new MCE Blu - ray player looks like a wonderful solution, but only if Encore CS5 on Mac would support it.

  Thank you!

  I am positive that your Mac Pro has the connectors. The SATA cable it can be somewhat difficult if you're not comfortable deleting some parts with a screwdriver, but I found it very easy.

  Cables SATA sitting around, I had had a little long boxes on the ends of the connector forcing me to have to remove a small amount of plastic from the piece of fan housing. I think that if you buy a kit from OWC cable they include cables that are lower profile but whatever it is, it's not too bad. I just use a dremel to remove a small piece about 1 "x 1" directly above the ports. "

  Here are some instructions I found: http://www.newertech.com/downloads/nwtmpqxe32.pdf (Note: the pages in this guide are all mixed!) These guys here sell a kit that delivers these unused ports of SATA to eSATA ports.

  You will see that they have low profile cable I was referring to that and so they didn't need to cut the case fan at all. I would say just OWC (www.macsales.com), because they know what you are looking for and you can sell a kit that has the cables you need, including 4-pin-power to SATA power. I recommend you to install the two cables while you're here, so if you later decide to add another SATA drive or an SSD, you will not need to take off again. BTW, add an OCZ Vertex 2 60 GB SSd drive as my boot drive for the OS and applications has been the single most visible upgrade I did and makes the Mac Pro just smoke! Same value as I just pasted the small SSD up there in the optical Bay without a mounting kit, and it works great!

  In all honesty, theough, the external enclosure for Blu - Ray works well and is easier to access the drive, because it is now located on my desktop. If you're uncomfortable to disassemble your machine just get quadruple housing interface with the chip set Oxford 934DSB that I can guarantee you that it works out of the box. It cost $140 for the whole machine, not bad compared to the alternatives.

  The reader is this: LG WH10LS30. Looks like it's still on sale for Newegg $79 until the end of the year.

  Housing I have is the following: BYTECC ME535-Limited-BK. Another $60. The OWC, looks a lot prettier in a Mac environment but costs $40 more for the same features all in brushed aluminium.

  I've been creating and burning with yet but Roxio Toast 10 Titanium burns and the authors of the Blu - Ray just wanted to make a CD/DVD

  Good luck!

• Options of the SSD in late 2013 Mac Pro update?

  Options of the SSD in late 2013 Mac Pro update?

  Mac Pro has 256 GB which is almost full despite the displacement of all the large files (Photos, downloads, etc.) out of the disc. I'm at a point where the Player update seems to be a must.

  OWC option seems a bit of a hack using a slower drive and a controller.

  https://eShop.MacSales.com/shop/SSD/OWC/Mac-Pro/2013

  MCETECH claims to use a new disk allowed Apple with trim shoring and the ability of bootcamp to use Windows (important to me).

  http://store.mcetech.com/mm/merchant.MVC?Store_Code=MTOs & Screen = prod & Product_Cod e = 1TBPCIESSD-MP13

  There are eBay sellers who claim to use the running game in recent versions of the end of 2013 Mac Pro.

  http://www.eBay.com/ITM/new-Apple-Samsung-1TB-PCIe-SSD-MacBook-Pro-iMac-MacPro-L ate-2013-2015-SSUBX-/ 151605593746

  and

  http://www.eBay.com/ITM/new-Apple-Mac-Pro-late-2013-1TB-PCIe-SSD-Flash-storage-M Z-KPV1T0R-0A1-605-00108/351601210482?_trksid=p2047675.c100005.m1851 & _trkparms = AI d 3% D 222007% 26algo % 3DSIC. MBE % 26ao %3 D 1% 26asc %3 D 38804% 26meid % 3Dff768b1c384b46d68010 bf8050452542% 26pid %3 D 100005% 26rk %3 D 4% 26rkt %3 D 6% 26sd %3 D 151605593746 & rt = nc

  two sellers have a very high rating, but I don't trust eBay.

  The MCETECH seems to ensure ongoing compatibility as it is a part of Apple.

  Any ideas or experiences with the above or other good known options?

  OWC option seems a bit of a hack using a slower drive and a controller.

  https://eShop.MacSales.com/shop/SSD/OWC/Mac-Pro/2013

  I think you're bad read the OWC page. They propose to replace the internal SSD stick with their largest capacity SSD stick. The external box is only for you to continue to use the original USB key (perfect condition) as an external drive, if you wish.

• Cannot see function analysis using printer sharing on Snow Leopard USB connection

  I have two iMacs connected via ethernet to a wired ethernet network cable / wireless. Previously, my PhotoSmart C7280 is connected wireless network, and I was able to scan and print from any computer using software built into Snow Leopard. Scanning and printing has been a bit flaky lately due to wireless network problems, so I just moved the all-in-one at one of the iMac, it connected via USB and enabled printer sharing. I can now print and scan from the iMac to which it is connected, but when I access it from another iMac, all I can do is printed. For example, if I open Preferences system and then select Print & Fax, I can add the printer to the list of printers OK, but when I select the PhotoSmart from the list, I don't see paws print and scan that appeared at the top of the pane that results. I can access only the features of the printer. I have already reset the printing system and start again, but still no scanning. Any ideas?

  Well Yes, that's the way it works.  It is a sharing of print - only.  This configuration will not share the scanner.

  We will work on your network issues?

• My macpro is backup in the capsule of time even when I was at work, which means that the time capsule is consumed my data plan. Can anyone suggest a way I can have it the backup only when my mac pro and time capsule is in the same local wifi

  my mac pro is backup in the capsule of time even when I was at work, which means that the time capsule is consumed my data plan. Can anyone suggest a way I can have it the backup only when my mac pro and time capsule is in the same local wifi

  If the Time Capsule and MacBook Pros are not on the same network, the MacBook is not backup in the time Capsule. You probably see what snapshots leaving MacBook on the local disk, until the two are reconnected. If you don't want that to happen, disable Time Machine on a different network.

  Good day.

• First character left in file by reading the first line in text file

  When you use the function of reading text from a file file, I noticed that the 1st character is left in the file. I read the line correctly.

  When adding a 2nd line this character is in the file.

  Part vi code is attached.

  Any ideas?

  Thank you.

  Elik

  Can you attach a file of real data and tell us what you mean by "first character". The number of characters per line do you have?

  Can you tell us what you see in the modified file and what you expect to see.

  Everything seems good.

  1. Read you the first line and so the file pointer is just after the first line
  2. You set the size of the file at the end (seems unnecessary, because it does nothing). The file pointer is always right after the first line.
  3. You write the first line you read concatenated with a second line. It will be written on the current file pointer, i.e. after the existing line
  4. The first line is in the file twice, as planned.

  Setting the file size to the 'end' on an existing file does not have something useful. If you want to set the position of the file instead?

  Try to set the file position from and new data will be written at the beginning of the file.

• read the first character of each line

  Hello!

  I have a problem with the reading of a text file in LabView which I think is pretty easy to do, but since I'm really new to labview (and programming at all) I'm having a hard time to understand.

  So basically, I use the VI 'write file to measure' to write some test results to a text file. I'm just the ones and zeros so the text file looks something like this:

  1.00000

  0.00000

  1.00000

  ..

  and so on.

  I would then import these values in labview but I don't want decimals and I would like that everything on the same line, something like this:

  1 0 1 0 etc etc.

  (the idea is to then be able to convert the values to a hexadecimal number 1-F, if for example the above entry would result in 6.)

  I tried to use the function of text file reading, but I don't know how to convert then the entrance of my desired format.

  Also if you have any idea on how to start playback at the first 1, and then read the next 4 entries contact that would be great as well.

  Any help is really appreciated!

  
  

• Time machine is unable to perform a backup. Not able to access the sparsebundle. Problem occurred first on snow leopard OS. Followed Dragon upgrade to El Capitan. Only difference has error code of 109 changed to null. What about someone?

  Time machine is unable to perform a backup. Not able to access the sparsebundle. First of all, there is problem with the Snow Leopard operating system. Dragon followed in the upgrade to El Capitan. Only difference was error code 109 changed to 'null '. What about someone?

  We need some info.

  You can access from the finder Time Capsule? If this isn't the case, then Time Machine will not work.

  You upgrade the computer snow to El Capo and keep the same name?

  If you want to backup, it is best to start again... clean the new backup any attempt to add a previous backup failed.

  I recommend that you actually erase the TC... do a complete factory reset and start again.

  The previous backup if necessary can be archived on a USB drive connected to the TC assuming that Airport utility can still access it. Airport utility accesses the TC?

  With update installs all sorts of things can go wrong... so tell me more if you can not get anywhere.

• On Windows 7, how to implementing automatic uppercase the first letter of the first book and the first letter after each period?

  I'm using Windows 7, how do I configure my system automatically capitalized the first letter of the first word and the first letter after each period?

  Thank you

  Lisa.

  Hello Lisa,.

  It's more to do with the word processor on Windows. You don't say what word processing software you use. If you use WordPad which comes free with Windows, it is impossible to do what you want to do. However, if you are using Microsoft Office Word (that you can buy) then the CAP is set by default.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com