Reader of CD-ROM/DVD-Rom disappeared after the installation of Service Pack 2

Why my CD-ROM/dvd-rom drive does not disappear after the installation of Service Pack 2 and how do I get it back? Because before I installed Service Pack 2 I had a problem of code 10 and tried deleting the thing fixing upperfilter, but that did not work, so is there anything else I can do. I have a HP Pavilion dv9000 and it is 3 years old.

Thank you!

Hello

Check with HP, their drivers support and documentation online and ask in the HP Forums about known issues.

Support HP & drivers
http://welcome.HP.com/country/us/en/support.html

Contact HP
http://welcome.HP.com/country/us/en/contact_us.html

HP forums
http://h30434.www3.HP.com/PSG/

========

Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104/

Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.

Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.

Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.

Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

===============================

Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.

Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.

Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

-----------------------------------------------------------------------

You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.

Forums - a lot of expert real help
http://Club.myce.com/

CD/DVD units
http://www.myce.com/storage/

Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

Tags: Windows

Similar Questions

  • Impossible to install programs, download 1628: failed to complete the installation after the installation of service pack 3

    Impossible to install programs, download 1628: failed to complete the installation after the installation of service pack 3. What I have to do.

    Assuming you meant WinXP SP3...

    Why the SP3 was not installed for over a year?

    What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you tried to install WinXP SP3?

    A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • I have windows xp after the installation of service pack 3 I can only start in safe mode

    I have windows XP after the installation of service pack 3 I can only start in safe mode?

    Hello

    ·         You get the error message?

    ·         What happens when you try to start in normal mode?

    Method 1

    Windows XP can in every start Safe Mode by default. Even if you select the option Start Windows normally, it always starts in Mode without failure. IOW, you can't get out of safe mode.

    This happens if the switch/SafeBoot is added to the Boot.ini file. / SafeBoot parameter forces a boot in safe mode by using the specified parameters. The available parameters are:

    (a) minimal

    (b) network

    (c) safeboot: minimal (alternateshell)

    For more information about the boot.ini switches, see visualization and correction of the settings of the boot on x 86 systems

    RESOLUTION

    (a) click Start, run and type MSCONFIG

    (b) click the Boot.ini tab

    (c) If you have a dual-boot system, select the entry that is appropriate under the [operating systems]

    (d) in section downstairs, Startup Options uncheck / hisFEBOOT

    (e) click OK

    (f) restart Windows

    The entry/SafeBoot are removed from the Boot.ini file.

    Method 2:

    If the above method is not the cause, it seems that Service Pack 3 is not installed correctly.

    Step 1: You try to run the system restore from safe mode that will repair return the computer to the point while it was working fine.

    How to restore Windows XP to a previous state

    Step 2:

    I suggest you follow the troubleshooting steps form the article and check if it helps.

     

    How to troubleshoot an installation fails on Windows XP Service Pack 3

    http://support.Microsoft.com/kb/950718

    Note: System requirements to install Windows XP SP3

    Reference: Learn how to install Windows XP Service Pack 3 (SP3)

    Hope the helps of information.

  • my computer guard reboot changes back several times after the installation of Service pack 2 on Vista.

    I tried to update my computer (Dell, Vista Home premium) with service pack 2 for Vista.
    But after completing the installation, there was an error when I tried to restart to complete update and work stoppage.
    So I restarted the computer and, instead of log on screen, the message [service pack was not installed recovery changes do not turn off your computer] appeared
    and then restart automatically.

    Now it's repeating this cycle for a day!... .the message - > restart-> message-> restart...
    What should I do? I can still start windows safe mode. (the same message...)
    I have lots of important files it contains so really want to reinstall Vista.
    Please help me...

    Hi arkitekromero,

    Given that repair options did not work for you.  I suggest you try the method below.

    Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

    Rename the Pending.xml file, and then change the registry notes read the following important notes before you use this troubleshooting method.

    • Use this method to resolve the symptom of restart that is described in the "Symptoms" section, so that you can back up data before you reinstall Windows. You must use this method of troubleshooting only if you plan to back up data and reinstall Windows.
    • Use this method only after trying other methods.

      Note If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer for instructions on how to continue.

    • Use this method only if the computer has no restore points or if you cannot start your computer to a point where the system restore feature is available.
    • After using this method, the following conditions may exist until reinstalling Windows:
      • An update is being installed may not be installed correctly.
      • Windows Update may not work correctly.
      • If an update is installed, you may be unable to stop the installation process.
      • You may be unable to enable and disable certain Windows functions in option.
      • Certain optional Windows features may not work correctly.
      • The computer may be in an unprotected state.

    To rename the Pending.xml file, and edit the registry, follow these steps.

    Start Windows Vista and go to system recovery options:

    1. Insert the Windows Vista installation disc in the disc drive, and then restart the computer.
    2. When you are prompted to restart from the disc, press any key.
    3. When you are prompted, configure the language to install, time and currency formatsand keyboard or input method options that you want, and then click Next.
    4. On the Install Windows page, click repair your computer.
    5. In the System Recovery Options page, click the version of the Windows Vista operating system that you want to repair, and then click Next.

    Use the system recovery options to rename the Pending.xml file and modify the registry:

    1. In the System Recovery Options page, click command prompt.
    2. Type cd C:\windows\winsxs, and then press ENTER.
    3. Type ren pending.xml pending.old, and then press ENTER.
    4. Type regedit and press ENTER.
    5. Select HKEY_LOCAL_MACHINE.
    6. On the file menu, click load the hive.
    7. Look for the following folder:
      C:\windows\system32\config\components
    8. When you are prompted for a name, type Offline_Components.
    9. In the registry editor, find and delete the following registry subkey:
      HLKM\Offline Components\AdvancedInstallersNeedResolving
      HKLM\Offline Components\PendingXmlIdentifier

    Exit the registry editor:

    1. At the command prompt, type exit to quit the registry editor.
    2. Press ENTER.
    3. Click restart.

    Thank you for using answers Forum. Please let us know how it works.

    Joseph
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows does not start after the installation of Service Pack 3 for Windows XP

    Hey guys I have a question I received this automatic update (Windows Service Pack 3) I am running Windows XP Media Center Version 2002, the problem I have is after installation of the update my computer guard stop and windows not not start, I had to go back to my computer to a safe point (usually before the update) and I say usually because I already tried to install this two update times with the same result.

    I hope you can help me I really need your help, I'm totally distraught and I received the update to install it but I'm afraid to install fearing that my computer will not start.

    Thank you.

    Hi Crickets1,

    1 did you receive an error during the shutdown process?

    I suggest that you refer the below Microsoft article and try the steps mentioned to do before you install Windows XP SP3.

    Steps to take before you install Windows XP Service Pack 3

    http://support.Microsoft.com/kb/950717

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Reinstall the games and accessories after the installation of Service Pack 3

    Earlier this year, I accidentally deleted the entire folder games to help my computer run a little faster. my intention was to delete all except Spider Solitaire games which I played regularly - I had Service Pack 2 is installed at the time. A few months later the computer shop installed Service Pack 3 on my computer after the failure of the hard drive to get rid of a suspicious virus after that I connected to the internet. I tried to reinstall Spider Solitaire via the Add/Remove Windows components, but he says I now need Service Pack 3 CD even though it already on my computer! I was not received a copy of the cd if I should have a problem on the track. I still have the original CD XP Home Service Pack 1 on it. How can I reinstall the games?

    Hi MaggieMaggieYX,

    Check out the link below to put on with similar problem and check if it helps.

    http://social.technet.Microsoft.com/forums/en-us/itproxpsp/thread/495b50ae-e9ba-42c1-99f5-4c6aff5668dc/

    If the thread that the above help you not then need to uninstall service pack 3 on the computer and install the necessary games and then reinstall service pack 3 will support to the computer.

    How to remove Windows XP Service Pack 3 from your computer

    http://support.Microsoft.com/kb/950249

    Steps to take before you install Windows XP Service Pack 3

    http://support.Microsoft.com/kb/950717

  • Power options do not work after the installation of service pack 3 for Windows XP.

    I just reinstalled the SP # (for the fourth time) by micro dirs, now power options do not work on my XP

    "CASE # 1160-173781" ive just "REINSTALLED" SP3 on my XP HOME for the 4th time according to the instructions of Microsoft 'INDIAN-TECH? NOW MY POWER OF DAMNNED OPTIONS DO NOT WORK GRRRRRRRRRRR. SP3 IE8 ARE NOT DESIGNED FOR HOME WINDOWS XP SOFTWARE! and hard - to - go * if im going to pay for them fix THEIR MESS! everyone in firured here a way to solve this problem? I FIND A LOT OF QUESTIONS IN THE FORUM THING, B U T, "NON!"

    This link shud hlp sup:

    http://fivepercent.us/2008/08/15/Windows-XP-standby-and-Hibernate-problem-update-82008/

    http://fivepercent.us/2008/06/06/Windows-XP-standby-and-Hibernate-problems-solved-Finally-i-hope/

    http://internalcomputer.com/how-to-overcome-the-Windows-XP-SP3-crashes-after-the-update-and-the-driver-power-management-problem.computer

  • Why Logon script runs is not after the installation of service pack 3?

    I installed Service pack 3 on some remote computers connected to the domain.  With Service pack 2 login scripts will work fine, but after I installed service pack 3, that logon scripts do not run on slower links and links a little faster they work intermittently.

    Hello

    I suggest you to send your request in the TechNet forums since the system is in the environment field. Click on the link below.

    http://social.technet.Microsoft.com/forums/en-us/categories/

  • Unable to find the personal files and desktop wallpaper is changed after the installation of Service Pack 3.

    Original title: Service pack 3.

    My computer automaticlly installed Service pack 3 and when it was over installation and rebooted I couldn't come back, it only opens to the Welcome window that I tried to do it on safe mode, afew ways and all I would get was a mess, saying file is missing or damaged windows root>\system32\hal.dll. Please reinstall a copy of the above file, then there was another mess, saying load needed DLLs for Kerrnel. My computer would not shut off either Finally I held the off button down until it finally stops, then when I started it back up he did not return, but it wasn't the same startup window. There was another image of office programs on my desk were not all the same and all my photos are nolonger may not find them as well as some of my personal files that were no longer on my desk. is could someone please tell me what happened?

    Hi smittycindy,

    What steps you have tried to solve the problem?

    one) that you are able to boot to the desktop now, try to do a system restore that will repair return the computer to the point while it was working fine.

    How to restore Windows XP to a previous state

    (b) you can then manually download & install Service pack 3 from this link and check if the problem persists.

    http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

    Hope the helps of information. Please post back and we do know.

    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Stop slow Windows XP after the installation of Service Pack 3

    Original title: Windows XP SP3 is not shut down or restart.

    I installed the service pack 3 for win XP & Symantec endpoint protection. Start immediately, the system would not shut down or restart when I go to stop or restart. The only cure (for a novice like me) was to put the computer manually. I tried the C:\WINDOWS\system32\shutdown.exe - r t 01 run control but no downtime at all. Please give me solution for this particular problem.

    Hello

    I suggest you to go through the steps mentioned in the link and the Coachman.

    Advanced Troubleshooting for shutdown problems in Windows XP

    http://support.Microsoft.com/kb/308029

    Hope this helps and keep us informed if you need help.

  • Computer goes down to start-ups, blank screens, random reboots after the installation of Service Pack 3.

    Original title: problems since "Upgrade" from XP SP2 to SP3.

    I missed experience boot-ups, blank screens, random reboots and having to reboot several times to get my home page & then Office to appear since I updated to XP SP2 to SP3 - a Microsoft again found a solution to this bug or should I use the system restore and go back to SP2?

    Hi Gary,.

    You receive an error message or code when the computer does not start?

    It would be possible that Service Pack 3 is not installed correctly.

    (a) I suggest to uninstall Service Pack 3 from your computer.

    How to remove Windows XP Service Pack 3 from your computer

    (b) you can manually download & install Service pack 3 from this link and check if the problem persists.

    http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en


    Note:
    system requirements to install Windows XP SP3


    Reference:
    Learn how to install Windows XP Service Pack 3 (SP3)

    Hope the helps of information.

    Please post back and we do know.

  • Microsoft Word has changed after the installation of Service Pack 4

    When I turned on my computer this morning, I found the appearance had changed completely - the fonts, colors, the sidebar etc. However we can tweak those who use the Panel and the other adjusts the rest very easily.

    BUT now, I find that the word seems back to an earlier version - especially visible when you try to insert graphics. He seems to be back in Word 2003, where the paintings were very heavy and difficult to use and also look different when done from the charts I used in Windows Vista until yesterday. I'm in half way through a document and need to create a consistent look for the cards and it is now impossible. What should I do?
    Thanks for any help.
    RGC
    PS I have not had this problem with my other PC in the office which is also Vista running Windows 2007.

    http://support.Microsoft.com/kb/2463332/en-AU

    do you mean this particular update?

    From your description, it may be that you have lost your 'Aero theme' for Vista.

    or colors for your monitor have changed from 32 to 16.

    Have you checked your settings?

  • Closing after the installation of Service Pack 1

    I just installed the Service Pack 1 update, and now my computer will not be closed.  If I click on Hibernate, sleep, or stop, the computer powers down and power back up.  I wait for the hard drive to stop running all the time and stop it again and it bounces upwards, even when the screen is folded closed.  Y at - it a setting I need to change or something?

    Windows Update Forum:

    It comes with Vista, upgrade install and activate Forum.

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

  • After the installation of Service Pack 1 for Windows 7 Media Player shows more album when sorting music by genre.

    Any suggestions on how to restore this function?

    Please click the small arrow to the left of the search box, and select the icon or tile. Who help me?

  • The installation of Service Pack 2 for Vista failed. I tried several times. Message reads "not successful." "Element not found". I click on the 'Détails' link and it shows the following error: ERROR_NOT_FOUND (0 x 80070490).

    The installation of Service Pack 2 for Vista failed. I tried several times. Message reads "not successful." "Element not found". I click on the 'Détails' link and it shows the following error: ERROR_NOT_FOUND (0 x 80070490). I tried in several ways through the links suggested to solve the problem and nothing has worked.


    I turned to the forums and I saw that many, many people have the same problem with Vista SP2 Upgrade. Microsoft and several of its Vista customers realized that Vista has a lot of problems, but people who have need of the service. Being able to download and install the SP2 can make Vista more stable, but I get the same message mentioned above, and so I am sure are a lot of other people who are trying to get Service Pack 2 integrated into Vista.

    0 X 80070490 - ERROR_NOT_FOUND
    Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

    The error you receive occurs if there is corruption in the manifest of component maintenance base.

    Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
    http://support.Microsoft.com/kb/931712
    "Explains the SFC / Scannow.

    A repair install is the usual solution of SFC/scannow does not work.

    You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
    http://support.Microsoft.com/kb/958044

    NB: If you have installed SP1 for Vistahttp://support.microsoft.com/kb/948537

    Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed.

    Uninstall SP1

    See also:

    How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
    http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

    TaurArian [MVP] 2005-2010 - Update Services

Maybe you are looking for

  • Splendor Pro U500 - installation of Windows 7 running in a loop

    Hi, I have a Satellite Pro U500 (PSU83A-00N00D) I started the 64-bit install (Windows 7 Professional) and seems to be up to post install configuration but get stuck in a loop making the 'system of rating performance now' is this normal?, should I wai

  • OfficeJet pro 8600 more: HP officejet pro 8600 more - error B86F3A7C

    Our printer is locked with all lights flashing. Or turned off, it starts good then shows the errornumber pasted below - and starts to Flash again. How to return to the normal operating mode?

  • Pavilion 17: Off Hp Pavilion system

    Help, please My system was found distraught when my son entered the incorrect password, disabled people's code: 99498200HP Pavilion 17 notebook pc Thanks in advance

  • 2000 - 299WM: System off

    I need help.  I have a HP 2000-299WM, and he is stuck on system disabled after evtering the bad power on password 3 times.  The code displayed on the screen is 76750243.  Can you please give me the log on password?  Thank you.

  • Derivate labVIEW FPGA

    Hello world I want to drift a signal, and my first thought was with a registry change (see attached picture) and I would like to know if there might be enough or if it should be improved. Thank you! J.