Reader view stopped working - 50.0.2

Similar Questions

• Fingerprint reader has stopped working after update vV1.0.3.49

  I recently downloaded from Toshiba and installed Fingerprint Utility V1.0.3.49 (tc00407400c.exe) and since my fingerprint reader has stopped working.
  The software opens but usually recognizes my fingerprints and can not connect any other way.

  Have uninstalled and reinstalled several times and same result.

  Device Manager says device works ok.

  May I ask what model phone you have and what system do you use?

  Probably, you need to delete stored fingerprints and after restarting again, you should try to register new fingerprints using the software update of fingerprints.

  Have you tried that?

• Pavilion dv6 fingerprint reader has stopped working

  My fingerprint reader has stopped working. I can open the Simple pass identification program but when I click on fingerprints, it indicates 'identity check' with an hourglass on the top of the icon of fingerprints, and no matter how long I wait, that's all that happens. All advice appreciated.

  -----------------------------------------

  Pavilion dv6t laptop 3100, Win 7 Home Premium 64-bit, 8 GB of RAM, processor i5

  "Where you go, there you are."

  Hi Mikey,

  Looks like you're running the Digital Persona of SimplePass flavor.

  Two things to consider / try, in order.

  If the reset works, you don't have to reinstall the driver...

  • Hard reset
  • Reinstall the driver

  Hard Reset:

  Sometimes, all you need to do is the computer suddenly.  This method works for a variety of connection and "glued" program issues.

  • Disconnect all the external devices first.
  • Remove the AC power and battery
  • Press and hold the power button while in the minus 30 seconds
  • Reinstall the power supply for the first start only * see Note
  • Power on - connect
  • Next time you shut down the system, replace the battery.

  * Note: You can ignore the little battery aside.  If you wish, replace the battery the first time and do it with her.

  =====================================================================================

  The pilot, from your Internet site:

  Validity fingerprint sensor Driver sp52354 V2.1.0.2

  • Install the validity sensor Driver installation package: it if called sp*.exe - the package will be most likely located in the downloads folder.  If you have control of "Admin", you can highlight the package and "double-click on ' to install it, otherwise just right-click, select"Run as Administrator"and install.

  I hope this helps!

  It's my pleasure to help.

  Say "thank you!" to the help by clicking on the star of Kudos to show your appreciation.

  Fixed?  Mark this message 'accept as Solution' to help others find the answers.

  Note: You can find "Accept as Solution" only on the threads started by you.

  Good luck!  Year of the Dragon!

• on dv6 fingerprint reader has stopped working after installing Norton 2012

  Fingerprint reader has stopped working after installing Norton Internet Security 2012 on both of my notebooks from HP.

  Product name: HP Pavilion dv6

  Operating system: Windows 7 64-bit

  Error message in Device Manager under biometric devices in Device Manager displays an exclamation mark beside validity sensors (WBF) (PID = 0018). The following message is under the general tab: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ».

  Driver is present and seems to be up-to-date.

  Appreciate your help.

  I have finally isolated the problem of my software lack of HP dv6 fingerprint reader. I think Norton Removal Tool, available online at www.symentec.com/nrt, was the reason. I am sure this conclusion because the exact same problem occurred after I installed Norton Internet Security 2012 on laptop HP same as my wife. I tried, in vain, to uninstall and reinstall the driver for the biometric fingerprint device provided by Validity Sensors, Inc.

  After spending a day and a half to try to "solve" the problem, I decided to restore my system and go back to the prior agreement of the point of the installation of Norton. Thank you HP to make this process quick and painless. Don't forget that if you installed anything after the restore point, it will have to be reinstalled.

  Fortunately, there's a less intrusive on CD of Norton removal tool. This utility uninstalls an older version of Norton you are requested to restart and then installs the latest NIS. It is a method of removal safer that wide brush offered by the Norton Online link, which wipes everything remotely suspect.

  After reinstalling Norton Internet Security 2012 from the CD, everything works as it should, including the fingerprint reader.

• Adobe Reader has stopped working

  My adobe reader has stopped working.  (Error meassage 1606 could not access network location % appdata%\).  I tried to uninstall the same error that presented themselves.  Tried to download adobe 9 same error appeared.

  Hello mchlmsv7,

  Thanks for posting your question!
  
  This problem may occur if there is an incorrect setting in one of the registry keys under the following:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
  HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders

  (1) follow the steps described in the following article. Make sure that you use the chart for Windows Vista to step 3
  http://support.Microsoft.com/kb/886549/

  
  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

   

   

  If the article mentioned above does not work, follow the steps in the following article. (Skip steps that are already covered in the first article)
  http://kb2.Adobe.com/CPS/402/kb402867.html

  Please let us know if it helps.

  Thank you and best regards,
  Abdelouahab

  Microsoft Answers Support Engineer

• I get an error, 'Adobe reader has stopped working ".

  My computer is running Vista and a few days ago my Adobe Reader launch is no longer.  If I click on the drive icon or try to open a pdf file all I get is a message "Adobe Reader has stopped working".  On the other hand, the program works in safe mode.  I tried to uninstall/reinstall and even a restoration of the system among other things.  Met someone with something like that, and if so, what is the difficulty?  Thank you.

  Originalt title: Adobe Reader launch

  Hi Tblud

  Uninstall adobe reader software using the uninstall program.

  Download and install the lower version of the adobe reader software.

  Now, the problem will be solved.

  If you are prompted for updates... you can update.

  Thank you...

• My reading has stopped working.

  My reading has stopped working. I closed a file, it will play the next day and now none of my files. I can look through the track, everything is there and in sync, but it won't play. All the ideas will help. Thank you.

  Check if the mercury pass is enabled in preferences.

  See you soon,.

  The f

• Adobe Reader has stopped working - how do I solve this problem?

  It's really annoying as whenever I try to use the free software adobe reader has an adjustment and an error - Adobe Reader has stopped working.

  I re-installed this and this again

  Help! its driving me crazy!

  Some things you can try...

  • Using Windows Explorer navigate to C:\Program Files (x 86) \Adobe\Reader 11.0\Reader, and then double-click Eula.exe and accept the license agreement
  • You can open Adobe Reader by itself?  If so, try to disable the Protected Mode [Edit |] Preferences | (Improved) security].
  • If Reader opens in itself, try to disable the Safe_mode in the registry; Download, unzip, then run the attached registry script
  • It might even be a malware problem; See http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

• I'm having a problem at the opening of the pdf document.  I get the error message: 'Adobe Reader has stopped working ".

  I'm having a problem at the opening of the pdf document.  I get the error message: "Adobe Reader has stopped working" then I get Windows to search online for a solution, but then my document is closed. I tried to uninstall and reinstall Adobe Reader XI, restarted my computer, but it did not help.  I get the same message. What should do?

  Can you open Reader by itself?  If so, check that disable the Protected Mode improves the situation [Edit |] Preferences | (Improved) security].

• "Adobe Reader has stopped working" error message

  Now, I get "Adobe Reader has stopped working" error message every time I open a PDF, image below. I don't know why this is happening, I had installed it for some time. I also uninstalled Adobe Reader and installed again and it still happens. Help, please!

  Additional information - the PDF opens in fact, and I can see the document for a matter of seconds, after which the error message is displayed. Which is very annoying, because it looks like it works (in this sense, it will open the PDF) but then the error message is displayed.

  Any suggestions on what I should do would be most appreciated, thanks in advance.

  

  You can open Adobe Reader by itself?  If so, try to disable the Protected Mode [Edit |] Preferences | (Improved) security].

• Adobe Reader has stopped working, all the solutions?

  I'm having a problem with Adobe reader X.

  I open the program and it works normally, nothing to report.

  Whenever I close the program I get the error message "Adobe Reader has stopped working)

  I'm on Win 7 (32-bit) SP1

  all ideas/solutions for this situation?

  Thanks in advance

  It worked for me on Win7 Pro 64-bit:

  Open Adobe Reader X (10.1.1)

  Edit... Preferences... General...

  Uncheck 'enable protected startup mode '.

  Close and restart.

  I use Symantec AV, I can easily believe it's an irritating inconsistency between what Adobe is trying to do and what Symantec is trying to do.

• Integrated card reader has stopped working.

  I have a Dell Inspiron 530 s with Vista Home Premium. The integrated card reader stopped working after I removed a SanDisk Extreme 16 GB microSD card. Readers have been H, J, K and L.

  I tried: restart. Uninstall the device drive and reboot and let windows detect the driver.

  Even after reboot several times, and my own research I do not find the readers anywhere.

  I also looked under disk management, and it does not appear.

  I don't know what else to try. Any suggestions?

  Thank you

  Jinn

  Try the Fixit http://support.microsoft.com/mats/hardware_device_problems/

• "INTEL BLUETOOTH SERVICE VIEW STOPPED WORKING.

  When I connect my headset/Bluetooth Headset there is display a message 'INTEL BLUETOOTH SERVICE VIEW a CEASES to OPERATE.

  A problem caused the program to stop working correctly. Yet one thing that happens when I run the windows display Info window "SERVICE has BEEN DISABLED FOR DELETED" Please help me in this regard

  Here's what worked for me, after days of frustration and bad advice from idiots on Web sites.  I do not know. Maybe I'll turn out to be one of those idiots.  That's it: click Start.  In the search box, type Services.msc.  Scroll to Bluetooth stuff.  This is the alphabetical order.  Find Bluetooth Device Monitor, or something to that effect.  By simple click, double-click, or right-click.  I don't remember.  Turn it on!  For some reason, it has been disabled on my computer.

• my adobe reader software stops working after working for a few seconds. The problem is an inconsistent AcroRd32? Help

  my adobe reader stopped continually worked for about a year. According to the report, there is a compatibility problem with something called AcroRd32. I have no idea what it is, any help would be greatly appreciated

  Adobe Reader is a rogue program for years. I suggest remove you it and replace it with this light and Windows more user-friendly PDF reader.
   
   
  Foxit Reader
  http://www.foxitsoftware.com/Secure_PDF_Reader/
   
   

• My acrobat reader has stopped working when I try to charge it, it stops at 59% and said that the program you are trying to use is on net work that isn't available resources

  I received a large number of documents in pdf format but software adobe reader won't open the files, I tried to reload the software adobe reader, but when it comes to 59%, it stops and a message appears

  The program that you want to use isn't work resources that are not available

  I tried uninstalling the drive and reloading

  But he won't let me not uninstall help

  Hi davidwtug ,

  Please try to run the cleanup tool "Download Adobe Reader and Acrobat tool - Adobe Labs" on your machine to remove all traces of the reader.

  Then, restart your machine and install the latest version of the player from here:

  Adobe Acrobat Reader DC install for all versions

  If you have problems opening the files, please refer to this article:- https://helpx.adobe.com/acrobat/kb/cant-open-pdf.html

  Let me know how it goes.

  Kind regards

  Christian