Readers MD3200 and 3 TB

Had pingée with the issue of the customer... and looking for a response.   Thank you!

"Assuming that 96 x 3 TB drives which is the largest LUN I can create?

I don't know no limit inherient.    But a 297 to Raid 0 with no hot spare seems excessive.   :)

Tags: Dell Tech

Similar Questions

  • Why opaque readers comments and timers "loading" loop

    Yahoo.com/blogs are not enabled to write a comment.

    Hi dline1979.
    I was able to display items from Yahoo, and the feedback form has been activated once I signed in and used 10 Firefox. I would recommend that you upgrade to the latest version here:

    http://www.Mozilla.org/en-us/Firefox/new/

    If you see pages that hang and do not load, you can also try this link:

    Firefox crashes or does not - how to fix

    Hope that helps.

  • Q and S readers on T500

    Can someone explain to me what are the needs of readers Q and S?  They don't are not updated by the ThinkVantage backup, so their purpose to restore the C drive to the original factory condition?

    I created the rescue and recovery DVD, so I have to keep the readers of Q and S (since I have pictures of these discs?

    Thank you

    Ed

    Hello

    Short story 'no '. However, you must create and image of your current system on DVD or on a network drive and a bootable CD to start a recovery program. You can do this with Rescue and Recovery or with Acronis True Image (my preference).

    Note that the image you have on the disk is the Lenovo factory image. It is usually best to create an image after you installed all of your software on the computer and configure.

    Carpet

  • password Keyring and the space on the hard disk

    I am facing problems of space on my hard drive and the Keychain password... Need help please...

    And, how do you think these two are related? Or you are having problems with both? In all cases, you will need to sharpen the issue, then we know what you mean.

    How to free space on the hard drive

    1. You can remove the data from your file except for the folder/Home/Library /.
    2. Visit The FAQ XLab and read the FAQ on the free space on your hard drive.
    3. See also release space on your Mac OS X startup disk.
    4. See where my disk space gone?.
    5. Remember to empty the Recycle Bin to reclaim space.
    6. Replace the disc with a larger. Check out OWC of readers, tutorials and boxes tools.
    7. Use OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are.

    [Permission to use any part of the foregoing has been granted by khati, exclusively, to theratter.]

  • Splitting and merging of road crash

    1 TB drive merger crashes constantly when waking from sleep.

    After the restart of a symbol of prohibition, and from the utility disk in recovery mode, the portion of the fusion drive HARD drive is missing. SDS is visible. To get the machine working again, I rebuilt the DDI and installed OS x on this drive. Started again and improved to 10.11. run the utility disk in recovery mode, and now I see the DDD and the HARD drive even if they are separate units. Erased the two, now I can reinstall OSX on the portion of the HARD drive, proceed to 10.11 to new load my backup time machine on this disc. The discs are still divided, but the HARD drive seems to be functional and everything works.

    Maybe a replacement drive would solve the problem, but I'm skeptical that this is the real problem.

    Notes:

    I was once able to use disk utility to combine readers in merger by car, but he ended up crashing and I had to start over. I intend to let readers separate and work from the HARD drive at the moment.

    The problem may have started after 10.11 upgraded OS.

    If you have AppleCare, let them deal w / it.

    Another option is this--> https://www.apple.com/support/imac-harddrive-3tb/

    Since you have a 1 TB fusion drive, I would call Apple Customer Relations - 1-800-275-2273.  Ask politely and firmly that you want to transfer to customer relationships.  Tell them exactly what you said in your post.  See what they can do for you!

    Good luck!

  • I have just updated to windows 10 and I have no sound, everything else works fine

    I have no Audio, sounds or volume afte the update/upgrade of Windows 10. This is NOT the case yesterday when I don't have Windows 10 update/upgrade in my laptop Vaio from Sony. Everything works very well, is to take a mouse of logitech usb among other things. My Audio jack does not work for headphones will not do. I found an old usb headseat PS3 seems to work, according to this logic, a set of usb speakers would do the same thing. If you have a HD cable you can connect your laptop to an HDTV and use the TV speakers. What can I do to solve my audio problem?

    Go to control panel > system and security > system and to the left, click on advanced system settings. Once there, go to the Advanced tab, and under performance, click settings. Then, click on the Advanced tab, and under virtual memory, click on change. Now, I did uncheck automatically manage it paging file for all readers size and check again, but if this does not work I heard uncheck automatically manage paging file for all readers size and selecting size made on order and set the initial size and maximum size to 3072 should solve the problem. I hope this helps!

  • RapidDrive and OS.

    Y580 owner, 64 GB SSD.

    So guys it's mostly a matter of opinion.

    You prefer to use the quick player software or keep readers posted and install the OS in the SSD?

    I personally whether it is sufficient to install the operating system and some software (since you have 64 GB) on the m-sata SSD

  • How to get the Partitions that have become readers return Partitions?

    In XP SP3, two of my drive C: (9 MB FAT & 3.63 GB FAT32) partitions became readers H and I in my computer and generates low disk space warnings, but seem to be ok in computer management/disk management. How can I get these partitions on drive C and eliminating H and I readers that have emerged?

    Hello

    These drive letter are fixed by dell to store files and data from the system. Made registry changes the drive letter to visible on the computer. In order to make any change that we have to contact Dell technical support for assistance.

    Contact Dell

    http://en.community.Dell.com/support-forums/software-OS/f/3524.aspx

    http://www.Dell.com/support/contents/us/en/19/category/contact-information?c=us&l=en&s=DHS&CS=19

    Hope this information helps.

  • I'm seting up a new system and trying to do a fresh Windows XP install on hard drive clean.

    However, when it will install the files it's about 50% and it goes to a blue screen saying IRQL_NOT_LESS_OR_EQUAL.
    My motherboard is ASUS M4A88T-V EVO. Pls Help

    Set of utilities to test for computer HARDWARE manufacturers:

    Note: If you are OverClocking or use an automatic overclocking or BIOS power saving features, start by disabling: Intel EIST, Turbo Mode, Cool and pretty and fall back to the speed of stock as a starting point.

    Disconnect the other internal hard drives and external USB devices.
    Look for any loose hard drive power or cables SATA, graphics card or other power cables.

    First run Memtest86 +:
    It runs from a floppy disk or CD and should eliminate or confirm if your one or more of your memory
    sticks are bad or the values of the SPD in the BIOS are correct.
    Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.
    http://www.memtest.org/
    Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
    http://www.overclockers.com/forums/showthread.php?t=409152

    Hard drive test:
    If you do not know your readers brand and model, try "Speccy", provides information system/computer in detail
    OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
    Note: Option RAM indicates number of slots, DRAM Timing.
    Works your memory speed (frequency). The nominal frequency of your memory.
    http://www.Piriform.com/Speccy

    Test your player - create a Bootable CD:
    Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective. Test your drive with the factory utility. If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
    http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

    For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

    Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
    Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
    Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
    Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
    http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
    Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
    Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
    http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

    Once Windows is installed:

    Device drivers: have you installed latest drivers from device of the manufacture of the motherboard?
    Check their support site for the latest drivers as the CD that came with the computer
    or motherboard may be older and less stable drivers.

    Visit the download of the manufacture of the graphics card: download and install the most recent Windows 7 drivers for your card.
    ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
    NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

    See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos
    or equivalent ATI.

    Prime 95:
    http://www.Mersenne.org/freesoft/
    It's a stand alone .exe file contained in an archive .zip.
    Simply choose to run the option 'stress test' for 4 hours or more.
    If your PC can pass this test, your memory and CPU
    are very good (close the housing cover in order to maintain adequate ventilation)

    Core Temp:
    The temperature of each core of the processor.
    Note: For the overclockers using stock radiator and cooling fan Intel/AMD you can expect
    a range of 35 to 40 at idle and 60 to 65 C max temperature when running Prime95.
    http://www.alcpu.com/CoreTemp/

    CPU ID (CPUZ): http://www.cpuid.com/cpuz.php
    Watch the clock speed of the CPU under various conditions of loading
    (when using speed step technology Intel EIST).
    #1 Note:
    CPU - ID has two tabs - tab 'Memory' that shows the actual speed of the memory
    and the "SPD" tab shows the nominal speeds for each memory location that is filled.
    #2 Note:
    COMPARE the two values, the actual speed of the memory must not exceed the rated speed of your memory.

    CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.
    voltages, temperatures, fans speed.
    http://www.CPUID.com/HWMonitor.php

    Test of Stress of FurMark GPU (graphics card):
    http://www.oZone3D.NET/benchmarks/fur/

    Pass marks burn in test: http://www.passmark.com/
    Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

    HD Tune:
    Provides information of the car and has an option (tab scan error) to test your drive.
    http://www.hdtune.com/

    SpeedFan:
    Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
    It displays your drives model number and compares your drive with other discs of the same brand and model.
    http://www.almico.com/SpeedFan.php

    GPU - Z:
    A utility light, designed for you give information about your video card and GPU.
    http://www.techpowerup.com/GPUZ/

    PC WIZARD:
    A powerful utility designed especially for detection of hardware, also analyses more.
    He is able to identify a large scale of system components and supports the latest technologies
    and standards.
    http://www.CPUID.com/pcwizard.php

    J W Stuart: http://www.pagestart.com

  • my cd/dvd drive has stopped playing cd/DVD, I'm operating on the windows media player 11 and my dell v305 printer

    my dvd/cd player works on windows media player 11 and don't play more or reads cd/DVD it used to automatically read the DVD but suddenly stopped working also my printer that a DELL V305 does more whenever I click on print a window opens and says internet Explorer windows has stopped working and I need solutions as I am a new student online and my readers need and printer to work. can someone help me please?

    I tried uninstalling and reinstalling my printer as well as running a virus scan and always my printer does not print. the fact to unplug and re plug do not work and also, since I put in a new ink cartridge it said also of alignment problem. whenever I click on print, a window saying windows internet explore has stopped working. I looked in my device manager and noticedthere is that a 6T 04 NIC DOES NOT WORK give me code 10. could be the problem? can someone help me please?

    This should not be the problem.

    http://social.technet.Microsoft.com/forums/en/itprovistahardware/thread/3a503cdb-e61c-44BC-97c4-0b38b0e5f929

    Read the info above about your error Code in the 6 to 4 adapter...

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Dell.com/support/downloads/DriversList.aspx?c=US&l=en&s=GEN&ServiceTag=&SystemID=PRN_INKJET_V305&OS=WLH&OSL=en&CATID=&impid=

    Uninstall/reinstall your printer using the drivers from the link above from Dell.

    http://support.Dell.com/support/topics/global.aspx/support/my_systems_info/manuals?c=us&l=en&s=Gen& ~ CK = anavml

    And get / please read the manual above for your printer model to solve the problem of alignment, as it is a Dell printer problem.

    See you soon.

    Mick Murphy - Microsoft partner

  • Email alerts does not work but test Yes - MD3200

    Hello!

    We have recently acquired a SAS MD3200 and we are very happy about it.

    But yesterday we had a drive failure and no alert message,

    Description of what we have:

    -Storage Manager upward and running on a Win 2008;

    -Email and all selected filters (warning, information, etc...);

    -e-mail tested ok.

    -the SMmonitor to the top and the conduct;

    -the server, where the SMmonitor and the Storage Manager are running, is on the same network of the MD3200;

    -I can ping both NICs of storage;

    I also disabled the windows firewall (I don't know if that is the question), put the new drive in the hope of receiving an email, but not... :-(

    Help?

    TIA

    Paulo

    Thank you Kenny.

    Everything is well configured.

    The problem is some kind of incompatibility between the SMMonitor and the mail server (qmail). When the coordinates with alerts "include" is disabled, all goes well.

    It must be a '\n' somewhere.

    See you soon!

  • Internet does not work on Windows 7, no drivers for the Wifi and LAN

    Original title: Windows 7

    I used to have Windows 8 on my laptop. Well, so I've updated for Windows 10. Config my laptop wasn't as good, so it's slow. Recently, I installed Windows 7 (as it is known for the performance) somehow, the internet does not work. Missing the drivers for the wifi and lan. What should I do?

    Well, as my readers usb and touch screen no longer work.

    You have installed Windows 7 on a machine that is preinstalled with Windows 8, without checking first if the computer manufacturer supported and provided Windows 7 drivers for it.

    If does not support or provide Windows 7 drivers for this, you should never have installed Windows 7 on this computer Windows 8 and we cannot help you.

    Reinstall Windows 8.

  • I had the opportunity to see all the drives in windows 7 and XP virtual machine on the same screen. He suddenly disappeared, and I need.

    As I set up my computer with Windows 7 Professional and XP virtual machine, I could see all the readers, W7 and the virtual machine on the same screen. I can't do now for some reason any. All I can understand what is is past is that I got a page long list of automatic updates of W7 and some XP updates and as far as I know, the current page of readers has disappeared since then.  I need this feature if I can transfer files between W7 and XP because some of my programs are in one program of windows. I have nothing special when I installed XP to achieve this functionality, so I really don't understand what it controls.  How can I get that back?

    I have solved my problem by trying everything that moves. Here are my steps:
    -Open Virtual PC and minimize it
    -In the Windows 7 machine, click Start click all programs
    -Select Windows Virtual PC
    -Select Windows Virtual PC (in the drop-down list)
    -When the window opens, right-click on Windows XP Mode
    -Select share >
    -Select the homegroup (read/write)

    -Minimized open Virtual PC
    -Select my computer
    Windows 7 disks will be under other

    I hope this works for you also. As I said, it worked like this until I had a huge list of automatic updates of Windows 7 and XP more some updates. Apparently, one of them cut something.

    Even a blind squirrel finds an Acorn once in a while!

  • How can I set up to dual boot Windows 7 and XP on 2 separate drives?

    I have a new hard drive and a new DVD Windows 7 Ultimate 64-bit upgrade. I want to keep my old hard drive with the ability to work under XP. Can I just install my new drive in any open slot, and then start from my DVD? I'll be able to start on the player of my choice? How does with the marking of the readers? And it defaults to Windows 7 whenever I start my computer? How I will be when you start the disk with XP?

    Hi ohyanet:

    Since you are using a version of 'Upgrade' of Win7 it will assume the license of the prior XP operating system and the Microsoft EULA says that you can no longer use your XP operating system on any computer.  To dual boot with XP'd you need to buy a version "full" of Win7, not an upgrade.  When you install Win7 it will make a copy of XP called Windows.old in your drive (C :) and you can copy the files from it to your new O.S. of Win7, but you will need to re - install all the applications from the original media.)

  • Readers who have trouble download & purchase of subscriptions in DPS

    I have readers who have purchased a subscription that can not see their problems. Similarly, a few readers, try and buy the subscription and it just turns and turns saying "purchase subscription" with everything that is happening.

    I was able to reproduce this problem in our application with our sandbox account. See the top of the image. It has been run for more than 5 minutes. (I'm definitely on a stable wifi connection). Our application has been updated in September.

    Any suggestions?  Is this a problem with iTunes?

    IMG_0011.PNG

    Hi Megan,

    For problems of this kind, you must call our company helpline for assistance. You can find contact information by logging on http://digitalpublishing.acrobat.com/ and looking at the Middle at the bottom of the page.

    Neil

Maybe you are looking for

  • problems with some Web pages won't load does not correctly

    I have had problems with pages loading correctly but have not been able to solve the problems. I also tried to create a screen shot without success apparently. It is with all Web sites are not only some here and there. Sometimes if I navigate to the

  • AirPlay Audio to Airport Express

    I tried several times to send audio from Airplay (Macbook air to appleTV) to my Airport Express without success. When content comes from ATV audio express airport works correctly on my wireless configuration. BUT When audio is sent from my mac via ai

  • Bateria Energia

    MEU tem uma mensagem netbook no icon da bateria: "Conectado mas sem carregar. Netbook nao works sem o cabo. SE o cabo ele desliga puxo. O what to do? ELE acaba voltar da assistencia tecnica apos ter comprado a little tempo. Faith trocado o HD Grato.

  • Update of window Vista

    Recently, I did updates for Vista ultimate and vista has restart the computer. During vista startup saying update configuration step 3 complete 0 after a certain time windows stops and goes in this way forever and won't start more Please let me know

  • How to capture video from a digital recorder to the computer

    I have a laptop HP pavilion g6. Running windows 7. What do I need to capture video on the pc of my recorder?