"Reading and burning DVDs in Windows 8.

Similar Questions

• Satego X 200 - 21 d: drive DVD TS-L632D is not read and burn DVD-R DL

  Hallo,

  I have problems with my DVD SATEGO X 200 - 21 d
  TS-L632D read a burn only DVD-R DL discs.
  I contacted Toshiba support via e-mail and asked
  for a new disk firmware, but the answer did not solve my problem.

  There are only updates in the download area of toshiba,
  but not for my car model. I can send my laptop
  for the money to a service partner, to check this problem.

  I do not understand this! I bought a laptop upscale
  for 1,700 EUROS and there is no support for the update of the firmware
  available to solve problems with newer drives?

  If I get this problem in the WEB, there is an a large number of
  questions and problems with playback and engraving
  Discs DVD-R DL with this drive model!
  How is it possible?

  I hope for some advice to get an update of the firmware player
  to solve the problems of reading and writing DVD - R DL discs.

  Janni J. Gettings of Germany

  Hello

  I found the update of the firmware on the European driver Toshiba page!

  Satego X 200 - 21 d seems to belong to the PSPBEE and the Toshiba page provides the update of the firmware to TO02.
  It s for the TS-L632 reader.

  But generally not all CD or DVD of all manufacturers is fully supported.

  My knowledge of the user manual should provide a details and info on compatible and tested media.
  Using recommended media, you can be sure they will be compatible and will work 100%.

  Greetings

• WMP 11 allows you to burn or read DVDs or only data CDs? originally made wmp 11 decoder has to read and burn DVDs or not? I am running windows xp sp3.

  I have windows xp pro sp3 and since I installed the fix wmp 11 Report Center that my disc is not readable in spite, I can play cds/dvds.and data also

  Impossible to install wmp! so the fix Center report as nero burning plugin causes wmp to crash or does not not despite

  every bit of nero have been removed from the registry.what going on? does any body help

  Hi Kostas,

  What is the brand and model of the computer?

  You can try the steps to drive your CD-ROM or DVD drive is missing or is not recognized by Windows or other programs

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756

  (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  Please post back with the State of the question.

• Qosmio F30 - 112 - DVD player can read and burn DVDs

  Hey everybody!

  Here's the problem: my DVD-ROM won't read some DVDs, it does not burn. In Nero when it start burning error pop up and the message is: Power calibration error

  I tried with all the testers for writer and reader of alerady and they all did not find any problem. They said that the recorder and player work properly. I even reinstalled twice end it always shows me this error and it will not burn or read some DVD Windows Vista (which I tried to read another computer and there is no problem). I tried to clean it with cleaning and nothing.

  I think that this problem started since I've updated the firmwire F103, but I do not know...

  Help please.

  Hello!

  Was the update of the firmware of your CD/DVD drive or have you another one? In my view, the drive could be faulty due to a bad firmware

  But before you exchange the drive, you should try to remove the upper and lower filters in the Windows registry:
  (1) start Regedit (start-> Run-> Regedit)
  2) go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  Good bye

• Unspecified error when burning DVDs with windows media player DVD is empty when starting get coded, then when control burn error occurs and does not burn the disk. How to fix this?

  I get an error when I burn DVDs with windows media player. He asked correctly when I lad the DVDs that I choose to burn a dvd disc. Then I add my video fles she adds and lists. Then I hit burn and it starts to create the dvd disc. All my files are wmv files. The bar regarding % moves to 100% but captured along with burning the disc, he rejected and I get an unspecified error message. with just a button to hit, which will close the error box. The files don't burn the disk accordingly. The disc remains empty.

  Hi N2tjq,

  Are a. When you facing this problem?

  B. is - what happens with all DVDs?

  C. recent changes made on the computer?

  I firstly you suggests to save the project to your computer, and then try to burn on a DVD at a slower burning speed.

  Choose a speed slower burn to your DVD recorder as follows:

  1 back to adding photos and video to the DVD page and then click on Options.
  2. in the DVD burner speed box, select medium or slow.
   
  Change-Windows-DVD-Maker-DVD-Video-settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings

  If the problem persists, download the service pack 2 for windows vista on the computer
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791

  See the link below:

  Error message when you try to publish a movie to a DVD using Windows DVD creation in Windows Vista: "unspecified error".
  http://support.Microsoft.com/kb/949281 
   
  For more information, please see the links below:

  Burn a DVD video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  Troubleshoot-problems-with-creating-a-DVD-Video-using-Windows-DVD-Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  If you use windows media player, see the link below:
  Burn-a-CD-or-DVD-in-Windows-Media-Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player
   
  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Why, trying to ' save/burn DVD' in Windows Movie Maker 2011, Windows stops at 40% registered?

  I carefully created a film that lasts 1 hour 19 minutes and consists of clips video, pictures always and the music with Windows Live Moviemaker 2011.

  I am running Windows Vista Home Premium and think I have all the updates that are loaded.

  When I try to "save/burn DVD", Windows starts the recording of the film process, and when she gets the 40% recorded point, Windows will stop.  What is the problem?

  Large, complex projects, such as the one you created tend to
  be problematic.

  There is a real possibility that you have included one or more
  source (photos, video clips, music files) files that are either
  corrupted or not completely compatible with Movie Maker / DVD Maker.

  Several formats are apparently compatible with Movie Maker but
  the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Audio - wav, wma, wmv

  And... the following article might be worth a visit:

  How to burn DVDs with Windows DVD Maker
  http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker
  (scroll down for...) What to do in case of problems)

• Are the installation DVD of Windows Vista Enterprise and installation DVD of Windows Vista other than company completely different?

  Installation DVD of Windows Vista business and Windows Vista DVD installation, other than the company

  Are the installation DVD of Windows Vista Enterprise and installation DVD of Windows Vista other than company completely different? If so, how are they different?

  Hello

  This edition targets the enterprise of the market segment: it includes a superset of the Vista Business edition. Additional features include support for packets from the Interface user multilingual (MUI), BitLocker Drive Encryption, and UNIX application-support. Not available through retail or OEM, this edition channel sale will get distributed through Microsoft Software Assurance (SA). Since Vista Enterprise classes as a benefit of Microsoft Software Assurance, it includes several benefits HIS only, including a license allowing the execution of up to four virtual machines running a mixture of editions of Vista and the versions [13], access to Virtual PC Express and activation via the VLK. [14] Vista Enterprise supports up to two physical processors. [7] 64-bit Enterprise supports 128 GB of RAM

  Windows Vista Enterprise made salient

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Vista-Enterprise-highlights

  Compare Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/products/compare

• DVD/CD RW do not read audio CDs or data or save a blank CD, but that it's ok to read and write DVDs

  My DVD/CD RW drive will not respond to CDs of any type, void, audio or data.  It whirs for a few seconds and then more nothing.  No AutoPlay (even if she is selected and in the registry as a value of 1), and if I try to click on the drive, the old hourglass stand forever and if I click on new does not, unless I have the disc, it erases then back to normal.

  The drive works fine for DVD reading and writing.  I tried to little nearly every thread relating to problems of CD, and I ran out of hair out! I uninstalled it, unplugged, repluged, rebooted, reinstalled, you name it! PC has updated the driver when I try to update.  I did all the advice regedit I saw and still nothing!  Anyone?  Please?

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  A CD/DVD cleaner might help.

  CD have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Burned DVD using Windows DVD Maker times only once on my Blu - ray player

  Original title: burned dvd

  When I do a cd burned with my windows dvd maker, dvd will play only once on my blu - ray player separated from the TV.  It works fine the first time, but the Player cannot find the disc any time after that.  I use dvd + r discs.  Is there a formatting problem, or do I need to get the dvd + rw discs.  I'm really at a loss.  Thanks for your help guys!

  Hi frapachino21,

  -The problem occurs with all CD/DVD you burn using Windows DVD Maker?

  -After playback of the disc on the Blu - ray drive, the drive is not detected on your desktop/computer laptop with no problems?

  To use certain kinds of CD or DVD discs outside of your computer, you must close the session, which is a process that prepares the disc to be read by other computers and players.

  You can try to close or finalize the CD/DVD and check if it makes a difference.

  Also see the following articles:

  Burn a DVD-video disc

  DVD-video burning: frequently asked questions

  Why my CD or DVD does not work in another drive?

  Disc burning: frequently asked questions

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Burn DVDs using Windows DVD Creator

  I am using first Pro CC 2014 in a Windows 7 environment.

  Creating DVDs is very good an exception for me, but I find that I need to do on a project that I finished yesterday evening.  Help files are full of duty (which is is more developed again) to handle this, but reading the instructions, it seems that I need to install Pr CS6 for this.

  Then... a few questions before I pass a (Aussie ADSL speeds waste) time downloading something I do not need, is it possible to use Windows DVD Maker (or, in a pinch, DVDStyler) to manage and, if so, what export settings should I in SOUL?

  FYI, I tried using the preset with PCM Audio MPEG-DVD and I thought that he had worked - but my 12 minutes project stopped after about 8 minutes and there is no audio data.  Also, I tried to compress the audio in the MPEG format in SOUL with similar results.  DVDStyler seems to read the .m2v file generated by the SOUL like wave, so I have not even tried a burn.

  Another question: if I don't have to go on the road of CS6/still, my project 2014 CC will drop open here or do I have to do some sort of conversion?

  Any advice on the best way to proceed would be much appreciated!  I'm sure I'm missing something and this should not be difficult.

  Well, playing around, I found my own solution which I'll post in case anyone else wants to burn DVDs without installing CS6/still.

  I found a piece of software called DVD Flick (free under a Creative Commons license) which can create DVDs from a wide variety of raw materials - I happened to use a version made in SOUL on the Youtube HD preset (1080) and it worked well - good quality, the instructions were clear and concise, and the coding was relatively fast (about 1 minute-by-minute video).  If I need to burn a DVD more in the future (so probably not, but who knows) can I have a play with other settings of the SOUL, but, for the moment, I am happy and can recommend DVD Flick on CS6/still just for the occasional DVD.

• How to download movies on the internet on my computer and burn DVDs of it

  I don't know how low loading movie from the internet and create a dvd of it can someone please help

  Hi esthernall12,
   
  There are many web services available for download videos from video sharing sites. Please use your favorite search engine to find a reliable site to do.
   
  Coming to burn these movies on DVD, you can use Windows DVD Maker, Windows Media Center, Windows Media Player or Windows Explorer.
   
  Find help below articles.
   
  Burn a CD or DVD in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Center
   
  Burn a DVD-video using Windows DVD Maker disc
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker
   
  Burn a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player
   
  Burn a CD or DVD in Windows Explorer
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer
   

  Important note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Burning DVDs with Windows Media Center

  Why does take so long to burn a dvd of a movie that I recorded with Windows Media Center Vista?

  Is there another way to upload videos/movies recorded with Windows Media Center on a dvd?

  I have Windows Vista Ultimate 64.

  What determines how long it will take to burn the DVD?

  The following factors play a role in how long it will take to burn a DVD:

  • Available system resources on your computer. The speed of your computer processor, the amount of available disk space and amount of RAM play a role in determining how long it will take to encode the video and burn it to a DVD.

  • The speed of your DVD burner, as well as the type of recordable DVD media you are using. A faster DVD burner with faster recordable DVDs results in a decreased once burning, compared to burning a DVD with a DVD burner slower more slowly the recordable DVD.

  • The length of the video on the DVD. When you use Windows Media Center to create a DVD, all the video and audio must be converted to a file format audio and video that a DVD player can decode and play. Long videos take longer to burn.

    You can include digital images and music on the DVD when creating a slide show. Photos and music are encoded in the MPEG-2 and Dolby audio, Digital video format and consequently, they will increase the time it takes to create and burn slide show DVD.

  City of http://windows.microsoft.com/en-AU/windows-vista/Burn-a-CD-or-DVD-in-Windows-Media-Center-frequently-asked-questions

  Check out similar posts mentioned under "Related topics" to the right of this message.

  There are always third-party programs to watch, things like Nero or Roxio, but they are expensive, unless you get them delivered with a new DVD player.

  Free Windows CD DVD burning software download list
  http://www.techmixer.com/free-Windows-CD-DVD-burner-software-list-download/

• Cannot read some burned DVD SD-R2212

  Hello
  Cannot read some burned a DVD with my cd/DVD-ROM sd-r2212.
  I have found no information on this drive (Dvdr-R or Dvd - R +)

  Where is the problem?

  Do I need a new driver?

  Thank you

  Hello Daniel

  What you mean with some DVDs. How do give you an answer if you are not specific to your problem?
  Which laptop model you have?

• Brander DVW/RW can read and write DVD double layer dvd

  Hello

  I would like to know if brander DVD/RW can also read and write the DVD DL(dual layer) dvd.

  or I have to buy for that special brander!

  Johan

  What is a "brander DVD/RW?   Support double layer DVD depends on the material.   Try to identify the make and model of the car since the Device Manager and find its specifications.

• Re: Satellite P200 - TS - L802a Won't burn DVD on Windows 7

  I have a Satellite P200. Due to the original HDD becomes full, I installed a new drive hard more - and installed Windows 7 Ultimate on it. I can't get my DVD burner to work (TS-L802a). The DVD player is fine because if I put the old hard drive back (Vista) it works perfectly. I have the 6.1.7601.17514 (TF32) firmware installed. I tried to upgrade to the WinVup2_L802A_RATO35 however the installer does not recognize that there is a DVD player - even if it will read DVDs without problem. It says update is not available and the Start button is grayed out.

  I searched high and low for a solution and I'm out of ideas. Can anyone offer a solution please? Thanks in advance.

  NB: I have not upgraded from Vista - I bought Windows 7 to install on new hard drive.

  Hey,.

  > even if it will read DVDs without problem
  This means that DVD burning function is affected, but you can play DVDs without problem, right?

  Well, this could be also related to the brand of DVD. This DVD you use for burning discs?
  I m using the DVD - R Verbatim and TDK. The two brands works fine on my laptop.

  What burning software do you use? Have you tried with CD Burner XP?