Reading Excel data

Hello

I have a file in .xls excel format. I want to read the data of this daughter.

most of the people said in the forum OR what convert .xls .csv file format and read data from «Read the file spreadsheet VI»

Another option for read excel file without converting a .xls file in .csv format.

Please help me

Thank you

Cedric Virpara

Yes, you can use ActiveX

https://decibel.NI.com/content/docs/doc-19913

Tags: NI Software

Similar Questions

  • Reading excel data file in Oracle form data blocks

    Hi all

    I want to read the data from the excel file in the data block of the module of the form. There are many resources available that explain how to put the data in oracle forms in the excel sheet, but I can't find a single resource to achieve this functionality. Can someone please help me get around this problem. Any help will be much appreciated.

    Thanks in advance
    Bilal

    Bilal,.
    There is little documentation available through My Oracle Support, which shows how to read an Excel file in a form, but you need a support contract with Oracle to access the document (how to read data from an EXCEL worksheet in a form using WebUtil Client_OLE2 [813535.1 ID]).

    I've seen this issue come up in the forum from time to time, so I wrote a small form demo which illustrates playback in Excel in a form. Discover forms: how to read an Excel file in a form. This demonstration uses the WebUtil library, so you must make sure have WebUtil correctly configured in the Forms Designer, as well as on your application server.

    Hope this helps,
    Craig B-)

    If someone useful or appropriate, please mark accordingly.

  • Graph of the Excel data with overlay of dynamic data acquisition

    Hi all

    I was next to the forum of Labview for about a year, it's the same with my programming so I'm a little rusty. I don't have someone code this for me, but just a quick plan high level to point me in the right direction.  I am able to work through the tutorials Excel etc.

    Task 1: Basically, I have a set of data Excel (2 to 6 columns of figures, not the time) I want to read in Labview and throw in a XY graph as the base model that remains visible all the time.  This data set is quite long, length vs. size (length is 100km, 1 m intervals). I essentially want a scroll X graph to display all of the data.

    Task 2: Acquire a direct serial data string which will be superimposed on the graph of task 1 model. Acquired essentially data comparing data in real time to previously.

    In the past, I made the simple projects with Excel data reading and also the reading of data in series.  What I'm not clear on is how to create the (static) graph with Excel data model while superimposing live data as it comes.  It is the basis of an annual check of the investigation process.

    Advice on the process would be appreciated so I'll be working through the nuts and bolts.

    Cheers for any help,
    Wes

    If you are worried that your data sets is too large, then run a test with simulated data to see how LV takes it. You might be surprised. In all cases, you should be aware that the chart control will need to redraw it with any changes you do anyway, and as far as I know, having a large amount of data is the main thing that can make a slow chart control. If you find that you have too much data, you might need to decimate it you based on how much you zoom before putting it in the graph.

  • Excel data in Labview counters

    I'm working on a project that requires me to read the data into excel and display this data using one of the numerical indicators of LabVIEW. I use Excel sheet Change.vi track to get data from Excel in LabView. However, I'm unable to display this data in a digital indicator. The question that I am running is that the data is in an array of strings 2D, and counters do not accept that numbers of unique value [I seek for dual-format]. Is it possible to access the values of individual table and display them with, say, a meter? I have 8 values of interest in table 2D.

    Thank you

    Michael

    Hi Michael,

    Here is an example of using the function of index table. I have a 2D array is read by a couple of functions of index table to display different values from him.

    Kind regards

    Perry S.

  • InDesign CS4 Excel data merge on the master page problem

    Hi all

    I had the following problem with an automated data merge document. He reads only the first row of cells in the document. That's what I did.

    Examples of data

    Excel

    Colum A Cel A1: Articlenummer

    Cel A2 12345

    Cel A3 5465

    Colum B Cel B1 Description

    Cel B2 Test 1

    Cel B3 Test 2

    Barcode Colum C Cel C1

    Cel C2 90000

    Cel C3 900001

    On the master page, I made a layout with the folling containers. The diagram below is for 1 item.

    Text for Articlenummer container

    Contatiner text for Description

    For the barcode text container

    I copied the three containers on the page which resulted in the master page with 40 containers for each item.

    I went data merge and connected the TXT document to the first set of containers. InDesign reads the data and place it correctly. But Indesign doenst copy the data in the row of the cell in the following sets of containters. If I connect the document to the next set of containers that indesign don't bed that the data of the first line of the cell which results in a document that contains only the same data.

    Somehelp with that does

    Best regards

    Phillip

    I suspect what happens, that's what I described in my previous post, PARAGRAPH:

    «Indesign takes what he considers a "record" what on the page, that is from the top left to the bottom right of the page, any indesign objects can enter it considers only a record.»

    It's a little hard to explain so I'll demonstrate in images using a simple merge

    If the finished merger looks like

    but, if a chart is placed on the same page (whether the page master or not, doesn't matter) this is where things can go wrong

    but this is easily seen in the preview

    so, when you perform a merge of data with multiple records, the data of the variable must be treated separately to static data (items that will be on every page as a background, or in this example, the smiley face).

    If the merger on a master page, static elements must be on a master page above and variable must be on a master BASED ON the static captain.

    If the merger on a standard page, static elements must be on the master page. The advantage with fusion on a master page is that data remain linked. The downside is that a page can contain variable data in the merged file.

    hope it makes sense.

  • Import Excel data into Form Designer

    I developed a dynamic form in Livecycle designer that will be sent to hundreds of schools throughout Nebraska.  There is a table in this form that has buttons to add or remove a line while dependent students informtion can be entered in this table. How I shape now works perfect for most schools, however; with the largest schools that will enter in over 200 different lines of information, it will be a long unessarily task.  Most of these schools already have the information that we solicit in an Excel file.  Is it possible for an end user of this form, using the adobe reader software to import excel data into the table?

    -Susann Wenzel

    It is possible, but you will find may be more difficult than what it's worth.

    1. you must manipulate the worksheet to make it look like a DB

    2. you must set up an ODBC connection on the system running the form and the worksheet...

    3. you would have to change to point to the worksheet from the definition

    4. you wish Reader the form using LiveCYcle Reader Extensions to allow the ODBC connection occurs in the drive.

    Paul

  • Satellite P500/01R reads the data, but cannot write data on CD files

    I recently bought a laptop Satellite P500/01R. I am able to read a data CD, but can't write data on CD files. The CD is read/write.

    Any ideas?

    Hello

    Have you tried different burning software?
    I m using Nero and in my opinion one of the apps better combustion.
    Here, I can choose between CD, DVD, DL or Blueray (only possible if the CD/DVD drive also supports this).

    Have you also checked diffΘrents CDs from different manufacturers?
    You should do this since not all disks are 100% compatible.
    I had several problems with different CD or DVD in most of the cases it was a compatibility issue, I tried TDK and this kind of drive is compatible with my CD/DVD drive
    I m using the standard of R.

  • I'm reading the data (speed rate and flow) of a table and it plot in a graph.

    I'm reading the data (speed rate and flow) of a table and it plot in a graph. I need to draw two values of l/min (speed) to the same speed. How can I do using a loop for?

    There is no need actually to use a loop FOR this. And using a graphic waveform isn't the type of field for this, for a waveform you a (Start), the dT T0 (greatness not) and table D (Data), this isn't what you want unless you know precisely the measure will take place according to an orderly disposal, you'd want a xy chart so that you can trace the measures where they occur in the axes X and Y of preference.

  • Read more data 1 byte of visa

    Hi, when I use VISA to read more data of 1 byte, only the first table got the data, but I want to separate data from 40-bit to 5 tables. Does someone know how to separate data in the tables? Thank you for the reply!

    Your problem is the ASCII conversion attempt.  As I said before, you have raw binary data.  Therefore do not touch anything that deals with ASCII.  All you have to do is take your byte array and convert each element in an array of Booleans.

  • How to view graphical waveform Excel data

    I have a file .csv with 4 data column.  I found something for another thread that allows me to display data from an Excel file in a table.  I have a problem with the following:

    (1) I need to display column data 4 but I can't seem to find a way to add other elements to the Invoke node so I'm stuck with power display only 2 columns of data.

    (2) why can't take my output and put it in a table, and then view it on a waveform graph?

    Please take a look at the attached VI.  I took notes in the block diagram.  When I try to join the Excel data to a chart, it indicates that the source type is a string, while the sink type is double.  How can this be when the Excel file has only whole?

    Help, please.

    Thank you.


  • How to read the date and time of a file by labview information

    How to read the date and time of a file by labview information? for example, time created and updated time.

    The similar question had already spoken here (this is the old thread but still seems topical):

    http://forums.NI.com/T5/LabVIEW/file-date-created/TD-p/109836

  • Read the data in the first column selected in a multicolumn listbox

    When a line is selected in a ListBox multicolumn (1 point), how can I go on reading the data in the first column?

    The listbox multicolumn itself is the digital picture data type. If you have allowed only 1 point selection and selection mode select any row, it returns the line number. The property node 'Element names' to return a table 2d-chains of the elements in your Inbox. The index of the row to the value of the listbox and column 0. See code attached.

  • reads the data when I select run

    When I insist on running my program reads the data from the meter power... when I'm not it gives me an error. I tried to put right waiting them etc and nothing seems to be set. Also, when I take the vi that read data from the electricity meter, the code runs much faster. I don't know if this has to do with global variables or what, but I just change a code supplied with this unit and it included global variables. I tried not to play with those yet. Anyway, if someone sees something that would eventually cure this problem please let me know. Thank you.


  • How to read the date of the day of the day of the year?

    I want to put 30 days for the test of endurance for the application of the components. the user will have the current value of 30 days with specify them the end of the day.

    I saw that the "seconds to Date/Time.vi" sure I checked the day of the year. If I can use this day of the year, I can add + 30 read 30 date.

    Barros,

    What I gave was the answer you were looking for originally because I believe.  You will not just be able to read the date in a coherent way and then add 30.  You can either use the function Get time in seconds or a few varaint it and then add the offset you want (you could use the get a Date/time string and enter the date directly, but this digital conversion which will be useful in the monitoring of the time elapsed will be much more difficult than what I provided only).  If you want to stop the test, simply to keep track of the amount of time the test is in pause and extension at the time where that amount.

    Cheers, Matt

  • Reading large data using the database connectivity

    Hello

    I use the Labview database connectivity toolkit to connect to my database sqlitev3 (I'm using ODBC). I just have to connect to the database (using the block of open_connection) and read all the values inside (using the select_data block). The problem is that my database is huge (about 2 GB), and I get this error:

    . VI NI_Database_API.lvlib:Rec FETCH Recordset Data (R)-> NI_Database_API.lvlibB Tools Select Data.vi-> real_web.vi-> real_web.vi.ProxyCallerADO error: 0x8007000E Exception occurred in provider: not enough memory is available to complete this operation. in .vi NI_Database_API.lvlib:Rec Fetch Recordset Data (R)-> NI_Database_API.lvlibB Tools Select Data.vi-> real_web.vi-> real_web.vi.ProxyCaller

    What should I do? It seems that he reads the data in the memory and it doesn't have enough space for it. When I read the data I want to write to a file.

    Read it in pieces. Write each piece to the file, and then repeat with the next segment. Try to read and process all data in one shot is not very practical and you found out will not work.

Maybe you are looking for

  • upgrade to El capitan now HP Photsmart will only scan in black and white

    I just upgraded my iMac to El Capitan. My Photosmart HP 7520 analysis now only Launchpad and in black and white? any ideas?

  • I can sign in iCloud online, but not in iTunes. Help?

    Everything works with my username and password - through devices, AppStore, web, etc. But iTunes will not work. It acts like I'm attached in the wrong password each time. Any tips?

  • frozen touchpad HP

    My touchpad soon. I did a restart using the power button and close button. When you press the powerbutton once again it does stop with the sign of HP, but with a big sign USB on a black screen. Now, nothing works on the touchpad. I connected to my co

  • Program TV Guide download

    My problem seems to be a common with threads in forum dating back more than a year.  I've upgraded to Windows 7 and now I can't download the TV program guide.  Also, in a related matter, I think, I can't download the TV setup.  (It freezes when appea

  • my camera (PAP2T) "cannot connect to Server" Please help me!

    I got this message to my device (PAP2T) internet page "can not connect to access the server" Please help me! I knew that my friends who all linksys PAP2T don device won't work no three days in my country the Libya, is this general problem or my count