reading in avi files frames

Similar Questions

• I can't read the .avi files with any program on my system.

  I can't read the .avi files with any program on my system. Have several programs that all of them played before September 2010, like the classic, windows media center windows media player media player, Director of windows, windows, 5.3, video programs video ulead dvd creating toshiba. Nothing works, frustrating not being able to download videos from two different cameras and burn them on DVD. I get an error of almost all the programs, saying that it was unable to load the required component, but I can't determine what this component. I tried to reinstall the codecs again non-joy.

  The free utility GSpot to identify the codec that created
  a .avi file... maybe it will help solve the problem:

  Download GSpot
  http://www.free-codecs.com/download/GSpot.htm
  (left-click the text: "Download GSpot")
  (on the next screen...
  left click: 'Download [GSpot 2.70]')

  You don't have to install it... just unzip the file and
  GSpot.exe left click to launch.

  GSpot Super quick start
  http://www.headbands.com/GSpot/v26x/Quick_Start.html

  Evaluation of video files and Codecs with GSpot
  http://www.windowsmoviemakers.NET/PapaJohn/68/GSpot.aspx

  Good luck.

• I can't read the avi file

  I can't play avi files.

  Error message from WMP: Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file.
  KM Player error message: number combination of filters could be found to make the stream (error Num:80040218).
  The DIVX Player error message: the file contains a track in an unknown format (code"" ") format. You may need to install a decoder directShow for video format in order to read this file.
  I tried all the codecs, directshow, directx, service packs, updates, as many players but still nothing.
  Microsoft article isn't good, because apparently you can't reinstall WMP on Vista.  All this happened after I made the recovery of the Dell system.

  It may be interesting to try to rename the file .avi
  to .mpg... believe it or not... sometimes it works.

  If this is a XviD file... you may need
  the XviD codec.

  This can be checked by using the free software GSpot:

  Download GSpot
  http://www.free-codecs.com/download/GSpot.htm
  (left-click the text: "Download GSpot")
  (on the next screen...
  left click: 'Download [GSpot 2.70]')

  You don't have to install it... just unzip the file and
  GSpot.exe left click to launch.

  GSpot Codec identifier
  http://www.headbands.com/GSpot/download.html

  GSpot Super quick start
  http://www.headbands.com/GSpot/v26x/Quick_Start.html

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  XviD Codec
  http://www.xvidmovies.com/codec/

  XviD FAQ
  http://www.xvidmovies.com/FAQ/

  Also... it may be worth trying to convert the files to
  another format like. WMV or MPG.

  There are many programs that can do conversions...
  The following freeware is an example...:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• Unable to read the .avi files with Windows Media Player 11 on XP

  Original title: Media player upgrade was worse than basic
  I recently updated my Player multimedia media Player 11 and now it won't play movies from AVI file that I used to be able to play easily on the outdated version. Why is this?

  Hello

  Do you have an error message when you try to play with Media Player AVI files?

  When you try to play a file that uses a codec that is not installed on your computer, Windows Media Player attempts to download the codec from a Microsoft server. If the
  Codec is available, the Windows Media Player installed on your computer, and then bed file. However, if the codec is not available on the server (for example, because)
  the codec not created by Microsoft), Windows Media Player displays a message that your computer is missing a codec.

  In some cases, the file you want to play uses a codec that is not available or compatible with Windows Media Player. When this happens, you may be unable to use Windows Media Player to play this particular .avi file.

  You can consult this article for a solution:

  You receive an error message when you try to play an .avi file in Windows Media Player
  http://support.Microsoft.com/kb/279242

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows media player cannot read. AVI files

  Original title: windows media player problems

  Whenever I try to open a movie (AVI) file windows media player hangs (stops working), I have tried different solutions of various forums but none helped me not so if someone tells me what to do I would appreciate it.

  Hello

  ·         What are the troubleshooting steps you have tried?

  ·         If it works well before? If so, remember to do recent changes on the computer before this problem?

  ·         Do you have an error message when Windows media player is blocked?

  I suggest you follow the steps mentioned below:

  Method 1:

  Run the troubleshooting windows media player setting and check if the problem persists. Follow the steps described in the following link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2:

  If the previous step fails to re-register the Dll for Windows media player files and check if the problem persists, follow:

  a. click the Start button.

  (b) in the search box, type command prompt.

  c. in the list of results, right-click command prompt, and then click Run as administrator.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  d. has the command prompts these commands.

  Type regsvr32 jscript.dll and enter.

  Type regsvr32 vbscript.dll and enter.

  Type regsvr32 wmp.dll , and enter.

  Method 3:

  If the above step disable and enable Windows Media Player to Windows feature on or off, follow these steps:

  a. click the Start button, select Control Panel, click programsand then click Windows turn on or off features.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. to turn off Windows Media Player, click media feature. And uncheck Windows Media Player and click OK.

  c. restart the computer to apply the changes.

  Note: follow the steps above to activate or activate Windows Media Player and check if the problem occurs.

  For more information, refer to this link turn Windows features turn on or off:

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  Method 4:

  You can uninstall any third-party codec installed for the avi files to play and check if this help.

  WARNING OF THIRD PARTY SOFTWARE

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

• read an AVI using "Binary file reading" vi

  My question is to know how to read an avi file using vi «The binary read»

  My goal is to create a series of small avi files using IMAQ AVI write framework with the mpeg-4 codec to long 2 seconds (up to 40 images in each file with 20 frames per second) and then send them one by one in order to create a video stream. The image has entered USB camera. If I read these frameworks using IMAQ AVI read framework then compression advantage would be lost if I want to read the entire file itself.

  I've read the avi file using "Binary file reading" with 8 bit unsigned data format and then sent to the remote end and save it and then post it, but it did not work. Later, I found that if I read an image using "Binary file reading" file with 8 bit unsigned data format and save it to local computer itself, the format should be changed and it would be unrecognizable. I'm doing wrong by reading the file format of number integer 8 bit unsined or should I have used other types of data.

  I'm using Labview 8.5 and Labview vision development module and module vision 8.5 acquisition

  Your help would be very appreciated.

  Thank you.

  Hello

  Discover the help (complete) message to "write in binary.

  "Precede the size of array or string" entry by default true, so in your example the data written to the file will be added at the beginning information on the size of the table and your output file will be (four bytes) longer than your input file. Wire a constant False "to precede the array or string of size" to avoid this problem.

  Rod.

• Cannot read AVI file using video app

  Hi team, support

  I can't read the AVI file using video app (version 9.2.A.0.6) error message: "cannot play video".

  Whereas, in the file AVI can play with VLC app (third-party application).

  I bought Xperia Z1 because I thought that it can play AVI video files (see:http://www.sonymobile.com/global-en/products/phones/xperia-z1/specifications/ ), please please do not ask me to use another third-party application.

  Info: model: c6902, Lollipop: 5.0.2 Build number: 14.5.A.0.270

  Thank you.

  As I've mentioned before, AVI is a container format when it comes to videos. The information you find in the paper is also also the decoder MPEG-4 format. I just tried an AVI file with MPEG-4 codec here, and it works very well. But if you try to play an AVI file with another codec such as: JPEG, RGB or Cinepak, they probably won't work because they aren't supported codecs.

  You can always download a program on your computer that can check the information of your AVI file container. MediaInfo is an example of this program.

• After you import the avi file to new laptop, reading looks like he will ignore the frameworks

  I created successfully a project of first Pro CS5 using my desktop computer computer (i7 with dedicated NVIDIA graphics card) without any problem. I then imported the video file avi created on my desktop to my old laptop (intermediate level) with the same edition of Premiere Pro is installed and enabled in Premiere Pro create a new project it without any problem reading. After moving first Pro CS5 to my new laptop higher end, I imported the avi file of the desktop to create a new project on the new laptop, but when I went to play the video in Premiere Pro on the new laptop, the picture is shaking during playback as executives are to be ignored. The new laptop is far superior to my old, so I don't know what is the issue. The new laptop is an i7, 64-bit, 8 Gig RAM, NVIDIA GeForce 650 M graphics card.

  Is there a different setting that I needed in Premiere Pro on the new laptop computer?

  Here are the details of video file:

  Image size: 720 x 480

  Sampling: 32

  Frame rate: 29.97

  Audio Format: 48000 Hz - 16-bit - stereo

  Project Audio Format: 48000 Hz - 32 bit floating point - stereo

  Total duration: 00 41; 31; 17

  Average: 3.6 MB/second

  Format of the pixels: 0.9091

  AVI file details:

  Contains 1 track (s) of the video and 1 audio track (s).

  Interleave: 1: 28.99

  Video track 1:

  Size is 8,34 G bytes (medium frame = 123,44 K bytes)

  There are 74673 keyframes.

  Frame rate is 29.970 fps

  Image size is 720 x 480

  The depth is 24 bits.

  Audio track 1:

  The size is 456,22 M bytes

  Rate is 48000 samples/s

  The sample size is 16-bit

  Taking your advice, I discovered an error of 'beginner '. When I imported the AVI from my office, I was a hypothesis that it was copied to the disk on my new laptop... Oops! The glitter is attributable to the project on the laptop trying to access the file through the network traffic. When I copied the avi file on my laptop, then created a new project in the key of my laptop - problem solved. Thank you, Jim, the suggestion on several disks. I'm immediately incorporate.

• Stor.e TV 1.5 TB - not able to read .avi files

  I transferred .avi files from my computer on Stor.e tv and for some reason the icon on the left is a question mark instead of the usual.

  Not only that I am not able to read .avi files.
  The strangest thing happened only in some of the files (4) I was transferred.

  Can someone please help?
  Thank you.

  Hello

  Have you tried to repeat this procedure?
  Delete the files copied to the HARD drive and copy the files once more.

• Cannot read data from avi file

  Hello

  I wrote timestamp data and exposure to an AVI file, but I can't as the file data using the read avi function.  I enclose the code to play the video, but also an excerpt of 7 video framework.  If you open the video in a hex editor and search for 'Time', you can see that the data has been written to the file, but I just get the empty string when I try to read this return as in the attached VI.  I'm doing something wrong?

  I use LV 8.0.1 and IMAQ Vision 7.1.1 4.0.

  Thank you

  Greg

  Thank you for your help.

  Finally, I got this problem.  I tried the IMAQ upgrade as you said, repair facilities IMAQ, LabView and removing and reinstalling all my software of NOR.  None of this has helped.

  In that time, I had a lot of other problems with NOR-MAX, got totally fed upwards, formatted the hard drive and reinstalled windows, LabView and all the stuff of vision.  In the process, I discovered that I had bad RAM and replaced the one too.

  Almost all problems are gone now, including this one.

  Thank you

  Greg

• COOD109B error reading of an AVI file

  get a cood109B error when I play the avi file

  It is a question of not having the right CODEC installed. CODECS are files that help the compression/decompression of various formats of audio and video files during playback.

  If you want to download and install a package of codecs, I would recommend one of the K-Lite codec packages available here. The regular package should be enough, but you can opt for the full package.

  Once you have downloaded the package on your computer, you can right-click on the installation. EXE andrun as administrator to avoid any problems with the installation

• Reading CCTV software .avi files prob

  When I try and play .avi files saved on my hard drive to my DVR card/software version 11.0.6002.18311 for Windows Media Player (or any other player besides), I can see and hear, but there is a very important, continuous, loud, popping noise all the time. What can I do to fix this? I have Vista Home Premium, nVidia GeForce 9500 GS graphics, Realtek sound card, (I think?), and the 8-Channel DVR card (which I only use 3) card PCI PC CCTV DVR H.264 100 fps.

  Hello and thanks for this info, but I had already looked at and have no idea of what I need or what I already have, much less know what would be safe to download even if I could work on what I need - all that I know is that I have the latest version of Windows Media Player!

  It's only the .avi files by the DVR card software that won't play properly - all other .avi files play fine. So today I contacted the software support team card and explains the problem and their response is that they are now aware that there is a problem with the playback of files in WMP and are trying to put that right. Apparently, they send me an update as soon as POSSIBLE. We'll see!

  Thanks a lot for your answer anyway. I do not know others with a similar problem will find useful.

  Kind regards

  SoozeW.

• IPad - problem of AVI file

  I recently bought a camera of the fauna which records AVI video files. Once converted, the intelligent use of the Pro converter for - iPad.m4v files, I can play the files on my Mac desktop. However when I transfer the converted files (copied to an SD card using an Apple camera connection kit) on my iPad air he does not see them, and I'm unable to transfer them or read them on my iPad.

  Why play the files converted on my Mac BUT not on my iPad? Please, can someone advise if it is possible to overcome this problem.

  I understand that there is a problem of codec with iPad playback of AVI files, that's why they need to be converted BUT even when the files are converted, they do still have no game on the iPad...

  AVI is not a codec, it is a container, it can contain a wide range of codecs

  a codec means a der (co) / oder (dec), this is the true format of video and audio, or

  That's what support ios devices

  Video formats supported: H.264 video up to 1080 p, 60 fps, high profile 5.0 with AAC - LC audio up to 160 Kbps, 48 kHz, audio stereo formats .m4v, .mp4 and .mov; MPEG-4 video up to 2.5 Mbps, 640 x 480 pixels, 30 frames per second, basic profile with AAC - LC audio up to 160 Kbps per channel, 48 kHz audio stereo in the formats .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 x 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi format format

  You can use the free program handbrake to convert the media in other codecs to work with your ios device

  rather than relying on the somewhat limited use feature import connection cam then synchronize using iTunes to ios device

• AVI files created from the same quality as the DVD engraved project?

  If I have a project and go to 'Share', I can create an AVI file specified as (use for editing in Adobe Premiere Elements).  Is the quality of this the same file that the quality of a DVD created through 'Share' - disc - burn DVDs?  Or another way to put it--if I created an AVI file and then later burned to disk would it be quality that burn the original project to a disc?

  johnf

  Thanks for the additional information on your situation.

  Although there may be differences in quality, I doubt that you will see quality differences between the content of your timeline from the timeline compared to the burning of a collection of DV AVI to DVD-VIDEO format to DVD disc.

  In fact, the case of the intermediary to DV AVI, is the classic way of working with a large project into smaller segments. But I am the mini series before the final project to confirm that this is the case of tests. From what you wrote, you have been there and done that. What is the quality of the videos that you have prepared in this way? If good, you are on the right track.

  If you want a better resolution product, such as AVCHD to DVD disc or Blu - ray disc on Blu - ray disc format, you could burn at or considers that the intermediate file a file like AVCHD.mp4 (1920 x 1080 at 30 progressive frames per second). If you've traveled the way DVD AVCHD, you can produce with a regular DVD burner, but he needs a reader Blu - ray which takes supported AVCHD DVD or one of these media players that support the AVCHD DVD. The Blu - ray disc format on Blu - ray disc requires a drive and a Blu - ray burner.

  According to the players and its specifications, some create the HD file and put it on a card memory or USB for use in other than the DVD player players.

  Major projects that will be appreciated by all.

  Best wishes

  RTA

• Horizontal lines in the saved preview AVI file

  Hi all

  On another thread, I was wondering why I was getting an error message when you try to export and save a movie, but now I was able to get a temp AVI file after hitting enter and save a file preview, but this AVI file preview, which is normally the same quality of the full saved file I think, has horizontal lines in it that are very obvious compared to the original file... below are the screenshots yet sample to compare...

  File Clean original AVI 720 x 480 30 fps

  

  Display of the lines in this file first 720 x 480 30 fps AVI preview

  

  I have a file imported into the script and she will play opposite via setting the speed being set to-100 and it reads in the preview window properly, in reverse, when I click on the play button.

  But when I do a "file > export timeline > film ' command I get an error message saying ' year error occurred while doing this film.» Error writing files (disk full)? " ... but my hard drive is nearly full, with more than 30 concerts left open on it... and my gadget to use RAM shows that more than half of my RAM capacity is not used.

  But I got a temp Preview file generated after knocking entered to play the preview after I was not able to save and that ' s how I got this file... and I think that the temporary files are normally just as strong as the final saved files because they take so much time to generate during the preview by pressing on enter as they do when you export and save.

  In addition, this process saved an AVI file of 8.5 gigabytes of file 1.5 MB AVI using the codec in CamStudio.

  
  

  Another test using the MSU lossless codec produces a 3.5 GB AVI file which seemed better, but wouldn't you just play faster than about one frame per second after an hour and a half to save time.

  Someone at - it solutions?... I see also that the new record of first shows a large screen size, but it was recorded at the same size of 720 x 480, as the original was.

  Thank you

  NuMetro

  The hard drive uses a swap file, and the program creates files (such as the rendered file you use now instead of an export file) and in general, if you get the message that the disk is full, chances are that your disk becomes too full for the program continues.  You must check your hard drive with care and make sure you have enough space to work without this message.  There are discussions here on how to configure your hardware to the good editing (forum hardware).

  The horizontal lines you see are "interlaced" lines... rather than being a "progressive"... file You can use mediainfo or gspot to see what your assets are exactly and then implement the project should match the one... and then export to match THAT... and you should be OK (once solve you the problem of hard disk)