Reading of micro speakers keep muting mic

Similar Questions

• Speakers get muted when headphones are connected

  HP TouchSmart 520

  Windows 7

  The built-in speakers put muted when headphones are connected.

  Hello

  I had the same problem recently with the urge of 23 I use at work, so I plugged the headphones in the speaker to the back of the computer. The music now plays only through the headphones.

  When the computer is seen from behind, the speaker on your desire output jack is probably close to the lower right. It looks like your headphone output, but it has a small icon that looks a bit like this:
  (((.)))

  In addition, a member of the forum named emmarose has had the same problem; That's how she solved: "the problem was solved when I deleted and reloaded the sound driver," she wrote.

• Cannot delete definitely read e-mails, they keep re appearing in google mail whenever I have reconnect. It semms to store. How can I stop this?

  Cannot delete definitely read e-mails, they keep re appearing in ggogle mail whenever I have reconnect. It semms to store. How can I stop this?

  original title: delete old messages

  Hello

  In dealing with the problem with Gmail, I suggest you to contact Google support for assistance:

  http://support.Google.com/mail/bin/request.py

  Hope the helps of information.

• I have micro serious lag in windows 7, if I use a micro usb, line or mic. Help!

  I have a problem of mismatch of mic in windows 7.  The delay is so bad, that it is difficult to complete sentences, where the game.  The offset is to know them if I use a micro usb, line or mic.  Anyone know now to eliminate this problem?

  Hello
   
  It seems that you are using TeamSpeak or Ventrilo aka event. If this is not the case, let us know what application are you using?
   
  There is some good info here if you use wind and all the different parameters in use. go through the following link:
  http://www.Ventrilo.com/Setup.php

  Disclaimer of third party application:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Use of third party software is at your own risk.

• Live audio of micro speakers

  I want to get live from my microphone audio to the My speakers. I read an article on how to do the line of muting of the United Nations, but in the properties of the speaker when I select the level all I get is the volume. My operating system is windows vista Home premium.

  Hello Evan P_ _ _ _ _.

  In addition to the Meghmala response, please relay the make\model of your PC and if you use an external microphone. Also, the additional microphone settings option would be dependent on the installed sound card\software. You can also check if the latest driver for your audio device is installed to check any options or additional Microphone settings.

  Thank you

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP ENVY23 - D6U52AV #ABA: speakers put muted when headphones are connected

  I tried after an option provided in other post but does not solve my problem in windows 10

  Try the following steps to see if they solve your problem.

  1 right-click on the icon sound in playback devices select system tray

  2. click on speakers (no helmet) so no default device makes your default device

  3. click on the recording tab

  4. click on mix stereo click right properties

  5. go to the listening tab

  6 playback through this device make sure that your headset is not selected

  7. repeat the process for your headphones by ensuring that the reading is not through speakers so

  Thanks for the reply with more details.  It is similar in appearance to me that help me in another forum.  But all the measures I mentioned it solve my problem and now I don't see any problem between audio switching between the built-in speaker or headphones.

  Concerning

• Problem reading Audition3 with speakers/headphones

  My musical director uses hearing to read the files.  We have recently upgraded it from 1.5 to 3.0.  Our problem is that 1.5 would play through the speakers until the headphones are connected, then would shut off the speakers and the headphones would be the only audio output would play the.  With 3.0, the only way I see to go to destinations of reading is to do it manually via Edit-> hardware (sorry, don't remember the option at the bottom of this menu), then choosing the destination reading (headphones/speakers).  I can't imagine that's the only way to make this work.  What Miss me?  Is there a way for hearing or the pc automatically detect and proceed to the appropriate destination based on which is connected?  Thanks a lot for your help!

  If you have not changed the operating system on the computer, I'm a little surprised that the active remote sensing is suddenly became an option at all - it's weird. Maybe it's because the 3 Audition using ASIO - I don't know. But one thing, you can try free use ASIO4ALL as a driver that will make the release of Audition 3 behave almost identical to Audition 1.5 and use the same driver within the PC - so your headphone expected to behave as he has already done...

  But if you changed the OS as well, then all bets are off. Detection of Microsoft active ridiculous causes much more trouble than that ever worth it. Your problem with an external interface, is that it will not power the speakers directly, so you would need an external and speakers amp to go with it, and it is quite a bit messy now, isn't it? What you really need, is a small pair of additional speakers with a headphone jack on them which cut the speakers - that may possibly be affected by the OS from M$ and would work with each system. My problem is that I can't currently to locate those who have this facility, I'm afraid - I'll have another look later, but maybe you can try the ASIO4ALL driver first and see if you can restore the status quo?

• Sansa View not to read a micro SD card.

  I have a sansa View 8 GB.  I just got my first sd card.  I loaded music on it from Windows media player 11 on a Vista system, and I don't see any content on the Sansa.  I can see the folder when I insert it into my laptop but I do not see the songs.  What I am doing wrong?

  If you plug your point of view on a USB 1.0 port, you will get a message that says: "this device will not work faster if it is plugged into a 2.0 port. If you do not receive this message, you already have 2.0 and from the age of your computers, they both should be 2.0.

  If your view in my computer as Sansa View, you're auto (or MTP) detection mode. Windows should display files that you have transferred to your view in this mode. I leave my opinion in this mode and have not had any problems to copy or delete any type of file. I have not really found the need for MSC mode.

  Just to check for you, I created a folder music on my card extension and copied an album for her. The view on the album and played it as he does for the music I have in the internal memory.

  The only thing I can think is that the Dell or the card reader adds something to your transfers that conflicts with the view. It is possible that the card reader using MSC mode to view and transfer files to the card. However, the display must always show and play music, but Windows does not display the content because once the card is installed in the view, the view is now in MTP mode, and as already said, files transferred in a mode will be not appear in Windows if the display is in the other mode. I try to leave the card in the view and just use Windows Explorer to copy your music to the card.

  Worked for me, hope it works for you.

• Internal speakers keep cutting out

  I have a Lenovo G560 and whenever I turn the speakers spent about 20% the sound cuts, but it works with headphones and external speakers.  It certainly isn't the material because I just replace the speakers and I tried to update the drivers and what not...

  Any ideas?

  try to restore the default values of speakers: default values for the Control Panel/sound/speakers/properties/Advanced/restoration

• Reading through computer speakers, even when headphones are connected to the sound

  Hello
  When I connect my headset to my dell ispiron 1545, the sound is played through the speakers of the laptop,
  nothing will stop it doing this
  In my playback devices I have

  Speakers/headphones
  IDT high definition audio CODEC

  Independent (RTC) headset
  IDT high definition audio CODEC

  -------------------------------------------------------------
  When I turn off the speakers/headphones, I have NO SOUND at all and I have a small speaker with an x in the corner
  nothing allows me to set the helmet as a defauld, when he says to set as default, nothing happens, as it won't let me change anything in the
  IDT Audio Control Panel
  Also, I am an administrator
  PLEASE HELP AS MY LAPTOP SPEAKERS ARE RUBBISH

  Hello

  Follow the steps in this article and see if the problem still occurs.

  http://support.Microsoft.com/mats/NO_SOUND
  See also: http://windows.microsoft.com/en-US/windows7/Tips-for-fixing-common-sound-problems

• I have a version of adobe reader pro download - it keeps telling me the demo has expired and I have to add a serial number that I don't have...

  any help much appreciated.

  Adobe READER is a free program... you actually have the ACROBAT program?

  Cloud Plans https://creative.adobe.com/plans

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• trying to install flash and adobe reader, adobe download manager keeps crashing.  Windows XP pro SP3 install new.

  I recently did a fresh install of Win XP Pro SP3 on a blank hard drive.  I use the latest Firefox.  I try to install Adobe Reader and Adobe Flash, but I get "Adobe Download Manager has encountered a problem and needs to close."  I tried cutting Winroot anti virus, but still the same problem.

  If you follow the 7 steps you can download directly here: XI Pro/Standard of Adobe Acrobat and Reader: Direct Download Links | ProDesignTools and Adobe Flash Player Distribution. Adobe

• Alcor Micro Card Reader

  When I tried to download pictures from my camera card reader memory chip does not recognize the memory chip. HP has a update driver for the card reader Alcor Micro, but it would not be installed. My computer is a HP Pavilion p6-2378, Win. 8.1, 64-bit, the Alcor Micro Card Reader Driver is for a 32 bit, so I was wondering if there was a way I could get a more recent program of Alcor Micro Card Reader because when I went to the Alcor society, they said that they only sold to companies like HP who built the computers. I was told by one of the technicians of HP to reinstall the Alcor Micro Card Reader since the recovery disks, but if the Alcor Micro Card Reader would not install new drivers why I would bother to reinstall. He don' your sense no. Is there any help out there?

  Thank you for the additional information.

  Have you tried to install the 64-bit driver for the card reader I have provided in my link above (64-bit driver)?

• When the function insert card reader with windows asking to format micro card?

  Hello, I have problem of a few days.when ever I insert the card reader with micro SD card windows asking to format...
  It is not happens with a single card, any micro SD card, I have insert Windows you want to format... but the card worked perfect in telephony, mobile and other things...

  I also try to use the same card reader & card in different windows 7 PC... It's working perfectly... .so help me with this...

  Hello

  Method 1:

  Follow the link below, run the fix it tool and check if it helps.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  1. check if the device is detected in Device Manager. Follow the steps to go to the Device Manager

  i. click on start, type devmgmt.msc and then on enter.

  II. research the name of the device

  If the device is not detected in Device Manager, and check if it is the hidden device.

  i. click on view under view hidden devices

  II. develop all winks in Device Manager

  III. there would be multiple entries in the device in gray Manager uninstall all entries shaded under all the winks and then restart the computer and connect the external device to the computer and check if it works

  2. install the latest drivers from the manufacturer's Web site and even ensure that the driver is compatible with the version of the operating system installed on your computer. Check if it works

  Links: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work correctly

  Installing the driver in compatibility mode: http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  3. check with any other card SD one another if it is get recognized or detected or you can even check if the same SD card becomes recognized or detected on another computer

• Read a data point every time via the sound card

  Hello!

  I'm reading the output of an amplifier to lock that cannot be connected to my PC. So I decided to read througn my mic.

  To do this, I connect channel 1 or 2 for my microphone.

  However whenever I do a reading I can not simply take a while but only several points at once.

  10 is the minimum number of points I can get when I put the sampling of 100 and length frequency 0.1 in the VI of its acquisition.

  Any combination that translates into less than 10 points gives me an error (for example 100 sampling rate and duration 0.01).

  I thought that by indexing dynamic data to acquire its VI would solve the problem, but playback is differnet from that I get when reading lock-in amplifier

  through GPIB.

  (I'm testing with a locking amplifier which I can via GPIB interface.  So at the same time, I read with my sound card and the GPIB and compare graphs)

  Any way to read a point every time?  Or I'm getting something other wrong here?

  Thanks for your time!

  Looks like the CDA min frequency response of 10 Hz, pg 69 card technical:

  http://www.hardwaresecrets.com/datasheets/ALC888_1-0.PDF

  However, you can apply a known value of low voltage DC at the entrance to see if it reads properly micro. Note that microphones out low level signals, looks like the ADC full scale entry is ~1-1.5V so make sure that your entry does not exceed. You can use dividers of resistive voltage if necessary to reduce the input voltage.

  -AK2DM