Reading of sheet TDMS root - need help
Hello
I'm quite new to TDMS files. I have a sample file with 2 sheets in which a leaf is referred to as root worksheet and another datasheet (concept of the point of excel sheet). I have some information to read (Raw 5) of the first journal (root) in LabVIEW. I tried with PDM with LabVIEW libraries, but I could only read the data. I also tried with excel fuctions I could open this file in excel, but without success. , I have attached the sample here file.
I would really appreciate if anyone of you could help me to read that particular line.
Thanks in advance,
Manu Mohan
LipingZhao wrote:
From your description, I don't know what data you want to read. You said "I have some information to read (Raw 5)", do you mean "line 5"? I used the Viewer files TDMS look at the attached file and the file is OK. Have you tried to use the TDMS files Viewer? Can you tell me what part of the data that you want to get the opinion of the viewer of TDMS files (for example, you can attached a screenshot to note)?
Thank you for your information about "TDMS File Viewer". I wanted to read line 5. Sorry for typo's fault. I created a new VI that will do what I said.
Tags: NI Software
Similar Questions
-
TEAC DV - 28 S - W model number
Hello
Try these steps and see if it helps.
Step 1: Run the provided article fixit.
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
Step 2: Run the troubleshooter of CD/DVD burning.
For ITunes:
http://support.Apple.com/kb/ts1436
See also:
Your CD or DVD drive is missing or is not recognized by Windows or other programs
-
Need help for reading in parallel on the same interface and writing XNET
Hello. I need help to configure CAN interface to write and read from the same interface.
I use NI PXI-8513/2. I use CAN1 as interface.
My had TO send status messages CAN every 100ms. I have to read in order to return akntoowlege to keep DUT CAN interface happy and not make mistakes.
So, I want to open Strim Session and readall frames in the loop. At the same time, I need to be able to write in a frame HAD at the time...
I only need to read one picture at a time too, but since I know the ID, I can pull it from the stream.
What I'm confusing all is how to put in place the same CAN1 interface to be able to write and read in parallel.
I think I would get errors that interface is already in use.
Since I'm new to CAN, I was read and write only when necessary. But, sometimes I was getting errors on my messages. Sometimes I get message, sometimes miss me. But, when I run CAN test criminal as sniffer he sends and written every time. I was told it's because it recognizes all messages.
I opened to suggestions of how best to implement the interface.
I guess I can use CAN2 and separator to work around this problem, but I would use an interface if possible.
Thank you
Hi Rus,
The XNET hadrware takes care of most of the low level of detials for you. The reading and writing of the circuits are both connected to the bus at any time. When you write to the hardware it will try to put a frame on the bus at the first opportunity he can. If the frame loses arbitration material re - will attempt to send the frame up is successful. Reception equipment monitor activity on the bus, regardless of what it conveys. The material received will usually throw a framework that was sent by communication equipment, but there is an Echo property pass to circumvent this behavior too.
Take a look at the example of the expedition: MAY-> NI - XNET-> Sessions-> multiple Sessions Intro-> CAN even exit entry framework Port unique Point.vi. Keep in mind that this example you will need to use a second CAN interface to recognize frames, it transmits. I would recoment against the example CAN output Frame Single Point which would mimic your ECU if you choose a type of cyclic frame running this example.
-
Need to show daq reads per second, but only to record a reading every 10 minutes, need help
You are also looking to taste to 1 Hz data acquisition?
My approach would be to use the DAQ acquisition to time your loop display reading each acquisition, then use the loop counter to control the logic of your writing to file. For 1 Hz and 10 minutes write I would use 'quotient and remainder' I / 600; If rest = 0, then write the data point.
For the date and time, under Calendar palette use the time get in seconds food a DateTime Format to a string.
-
I need help importing audio from a reader audio tapes and then burn it to a cd or dvd. We have some old audio cassets with our children and other parents record and want to put them on a CD or DVD media. I can't understand this. Thank you!
I need help importing audio from a reader audio tapes and then burn it to a cd or dvd. We have some old audio cassets with our children and other parents record and want to put them on a CD or DVD media. I can't understand this. Thank you!
=================================
The free Audacity software might be worth a visit:(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Audacity
http://Audacity.sourceforge.NET/Features of Audacity
http://Audacity.sourceforge.NET/about/featuresHow to scan discs vinyls, audio tapes and minidiscs?
http://Audacity.sourceforge.NET/Help/FAQ?s=recording&i=records-tapesTransferring tapes and records to computer or CD
http://wiki.audacityteam.org/index.php?title=Transferring_tapes_and_records_to_computer_or_CDVolunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
Need help to install vista on a pc that can not read the DVD
OK so my pc with vista family venus premium pre installed and somewhere along the line of my dvd read Hothead on my drive so now it only reads CD... ok here is my question how to install vista Home premium without being able to read my dvd system... I can burn and read cds... What can I do? any help greatly appreciated, thanks in advance
* original title - HELP, need help to install vista on a pc that can not read dvds(i have a legitimate vista key) *.
# Preinstalled Versions of Windows Vista are OEM versions. It cannot perform an upgrade from Windows XP. In addition, you can modify or reverse engineer OEM manufacturer of computers version of Windows Vista... it will never activate. Carey Frisch
-
After execution of the new update (2015.2), I can't read the imported video. Rendering seems to be a color chroma confused. I need help NOW please
FAQ: Why am I getting yellow and red lines running through my images on pause?
Update of El Capitan.
-
I need help for my reader to USB drive on my windows 10 ACER?
I need help for my reader to USB stick on my chrome windows 10 plug ins acer. Can you help me?
What Adobe application that you use?
This is the Adobe Media Encoder forum, and you did not mention anything on this subject. If you can let us know what Adobe application, you need help, we can help you make the right forum.
Thank you
Regalo
-
I need help to download and install Adobe Reader XI & Flash Player freed.
IOS Android or ? or Windows Tablet?
-
Hello, need help for Adobe Reader DC playing animation files that are specified in the pdf output by script Latex Beamer. My Adobe Reader DC refuse to open any format that I gave him. Thank you very much
Hey ihorl18351266,
Please note that you can open PDF files using only the CD player. Any other format will not be supported by the software.
Kind regards
Ana Maria
-
I need help installing Acrobat Reader - unable to connect to a DDE server messaged. Cannot access documents
Please see if "acrobat could not connect to the dde Server" when openning Adobe Acrobat PRo XI help.
-
I need help pass my Photoshop 7 from my old laptop to my new laptop running Windows 7 Enterprise. I have in vain two routes. I have the installation CD, it does not autoplay. I run Autoplay.exe in the root directory, I'm greeted, I choose English, I accept the EULA, I get the choice window Install / explores, with the install button already selected, click the button in Photoshop, CD towers, and nothing happens. In the 2nd attempt I run Setup.exe in the directory of Photoshop and nothing happens at all the. I'm never even offered the opportunity to enter my product code. What should I do?
There is probably a problem of compatibility between the old software and the more recent operating system.
-
Hello. I need help. I use Photoshop Elements 10 on my MAC, but is no longer reads discs. Can I download it from internet with my serial number original package? Thank you
Yes, from here:
-
I need help! I try to open my PDF but I get this message on my Macbook Pro! "Before you display PDF documents in the browser, you must launch Adobe Reader and accept the end user license agreement, and then quit and relaunch the browser." What should I do?
Do exactly what the message says, and it will go away.
-
need help on installing adobe reader im getting an error 1935 consignment... pls help
Please confirm the version of player and the operating system.
You can follow the article http://helpx.adobe.com/acrobat/kb/error-1935-install-acrobat-reader.html .
Maybe you are looking for
-
I'm new to Mac. I copied pictures on my new MBP. At one point he asked me if I wanted to import in the "Photos" application I said yes. A little later, I received a message that said I had used up my quota of storage clouds for photos for the day. Th
-
Satellite C650 - impossible to find recovery discs to perform a full recovery
Had to use recovery disc recently only to discover, too late, that I had lost the creator of two media drives to complete the reboot. Can't find them on the base - help homepage!
-
Cannot install Windows Update - 8024AFF error Code
original title: 8024AFF error Code Hi, I can not install updates on Windows Vista. I get the message Error Code 8024AFF. Can anyone help? Thank you!
-
Printing problems with a Canon Pixma MX882 do not print the correct paper size.
This is a new PROBLEM. Never had this problem before. I'm under Windows8, 64 bit. I am suddenly unable to print all labels postage to NORMAL size = 100%. He coinstantsly everything shrinks to half size no matter what I change settings. I've looked t
-
problem importing from dvd in windows movie maker
made a dvd with windows movie maker home but now I want to change it, it is possible to re - import into windows movie maker on the dvd that I did?