Reading only the numerical value of data packet?

I have an entry that gives me: 122345, %, 0000 0000

I want just the 122345 part so that I can graph the value in real time as data are to be listened to in the computer. How can I choose for this? Now I just have a straight read command and read buffer indicator, I did just unroll the package according to the number of bytes I tell her to read.

Watch the channel for several functions in the palette of the format string.  If the values are always integers, and always at the beginning of the string, the decimal string to number feature will work without extra effort.

Lynn

Tags: NI Software

Similar Questions

  • SQL: How to tell the difference between the numerical value and Alpha numeric

    Pls check the following requirements and let me know how to prepare the SQL:

    1. I want to find the product that begins with Alpha value separately

    2. I want to find the product that starts with the numerical value separately

    data are the following:
    CREATE TABLE prod
        (product_code                   VARCHAR2(4) NOT NULL)
    INSERT INTO prod
    VALUES
    ('L016')
    /
    INSERT INTO prod
    VALUES
    ('A035')
    /
    INSERT INTO prod
    VALUES
    ('B001')
    /
    INSERT INTO prod
    VALUES
    ('1717')
    /
    INSERT INTO prod
    VALUES
    ('7151')
    /
    INSERT INTO prod
    VALUES
    ('7019')
    /
    INSERT INTO prod
    VALUES
    ('0729')
    /
    INSERT INTO prod
    VALUES
    ('0730')
    /
    INSERT INTO prod
    VALUES
    ('L007')
    /
    INSERT INTO prod
    VALUES
    ('C013')
    /
    INSERT INTO prod
    VALUES
    ('D008')
    /
    INSERT INTO prod
    VALUES
    ('L021')
    /
    INSERT INTO prod
    VALUES
    ('0710')
    /
    INSERT INTO prod
    VALUES
    ('0718')
    /
    INSERT INTO prod
    VALUES
    ('L005')
    /
    INSERT INTO prod
    VALUES
    ('0716')
    /
    INSERT INTO prod
    VALUES
    ('0711')
    /
    INSERT INTO prod
    VALUES
    ('0701')
    /
    INSERT INTO prod
    VALUES
    ('0724')
    /
    INSERT INTO prod
    VALUES
    ('0728')
    /
    INSERT INTO prod
    VALUES
    ('0714')
    /
    INSERT INTO prod
    VALUES
    ('0704')
    /
    INSERT INTO prod
    VALUES
    ('7150')
    /
    INSERT INTO prod
    VALUES
    ('L024')
    /
    INSERT INTO prod
    VALUES
    ('L033')
    /
    INSERT INTO prod
    VALUES
    ('0721')
    /
    INSERT INTO prod
    VALUES
    ('0708')
    /
    INSERT INTO prod
    VALUES
    ('0723')
    /
    INSERT INTO prod
    VALUES
    ('L004')
    /
    INSERT INTO prod
    VALUES
    ('L018')
    /
    INSERT INTO prod
    VALUES
    ('0725')
    /
    INSERT INTO prod
    VALUES
    ('0719')
    /
    INSERT INTO prod
    VALUES
    ('0726')
    /
    INSERT INTO prod
    VALUES
    ('0712')
    /
    INSERT INTO prod
    VALUES
    ('0727')
    /
    INSERT INTO prod
    VALUES
    ('0703')
    /
    INSERT INTO prod
    VALUES
    ('TEST')
    /
    Kind regards

    Yamen
    1)select * from prod where translate(substr(product_code,1,1),'#0123456789','#') != '#'
    
    2)select * from prod where translate(substr(product_code,1,1),'#0123456789','#') is null
    

    Ravi Kumar

  • How do you get the numeric value of an image

    How do you get the numeric value of an image

    This in a small example

    var Red = ' \u00FF\u00D8\u00FF\u00E1\x05oExif\x00\x00MM\ '.



    Here is a link to a script open source that generates a string that represents the data of a file binary, especially useful to integrate a small image in a script or file patterns in a JSON structure, for example:

    Get the data from binary string

    HTH,

    Domestic-

  • return only the decimal value

    What function can I use to return only the decimal value of a formula

    (97 * 2.2) / 14 value returns 15.24

    I only want to use le.24

    Salvation is

    Use the formula - INT (formula)

    In the special case above:

    =(97*2.2)/14 - INT ((97*2.2)/14)

    You see two places to the right of the decimal separator in reason to be rounded off to the value real, in the shape of the cell to only show as two decimal places, either by setting the width of the cell close enough to force the rounding of the displayed value.

    Note that if the result is rounded (using the ROUND function) the actual value of the cell will be the rounded value. For the other two cases, the value displayed indicates only two decimal places, but the real value in the cell (and the additional calculations used by referring to this cell) is 0.242857142857144, which could lead to surprises in the results of the calculations downstream.

    Kind regards

    Barry

  • How can I get the numeric value of a reference?

    I would like to get the numeric value of a reference.  If I look at any reference with a probe, I can see it has value, i.e. F280006B.  I would like to enter this value in a digital indicator for some troubleshooting I do. but running a Ref directly in a digital indicator introduced the code. Somehow the probe's work, it must be accessible. All advice out there?

    Type caster in U32.

    Lynn

  • change the color of a function of the numeric value indicator bar

    I'm trying to customize a digital indicator, a bar of tank, to change the color of the bar according to the numerical value.

    I assumed that I could to make it by creating a property node for change FG and BG, connected to two color within a structure of the case box, but when I can function returns an error message.

    does anyone know how to customize?

    You must use the property 'fill color '.

  • Is it possible to connect a simple 1 d array to a digital indicator or what would be the best way to display the numeric values of the array on the front panel?

    Is it possible to connect a simple 1 d array to a digital indicator or what would be the best way to display the numeric values of the array on the front panel? Examples or suggestions would be greatly appreciated.

    Thank you

    Tunis

    Thank you Adam, it's originally in a while loop, I placed it in a loop for example, wired County in the for loop and presto, this son of a digital indicator. It works very well. Thanks for the help folks.

  • How to display only the total value in the upper part of the chart stacked

    Hi all

    I need to display only the total value at the top of the stacked chart in the report of obiee 11g. Can someone help me on this please.

    Thank you

    Hello

    Will be a little different approach suit you like the below a? Total for a day is displayed next to the attribute of the day. Here, the "daily amount" is also an attribute instead of a measure.

  • What is javascript customized for converting an estimate of the numerical value in equivalent term?


    Hello fellow Adobe users,.

    I'm trying to find a way to see the numerical value of average and presents its equivalent word.  Rather than display the number, it should show the following:

    A numeric score from 3.1 to 4 should show as pending

    A digital index of 2.1 to 3 should show meets expectations

    A numeric score from 1.5 to 2 should show as below performance

    A rating of 1 to 1.4 should show as failure

    Should what simple javascript I type the javascript custom in the text field properties?

    Looking forward to your comments.

    Thanks in advance!

    Jonathan

    You have a field that is the calculation of this average in number? Let's say you do and it's called 'average '. You can then use this code as the custom for the field "Average in the words:" calculation script

    event.value = "";
    var a = +this.getField("Average").value;
    if (a>=1 && a<=1.4) event.value = "Fail";
    else if (a>=1.5 && a<=2) event.value = "below performance";
    else if (a>=2.1 && a<=3) event.value = "Meeting Expectations";
    else if (a>=3.1 && a<=4) event.value = "Outstanding";
    
  • How to get only the year of a date?

    I try to shoot only the year of a date and does not know how this can be done. I tried the SUBSTR function but its does not not how I think. What I want to do, it is write a condition indicating the year of birth of point = current year minus 23, I have a calc than the figures of the age of the difference in the date of birth and the current year, but I'd really like to just write a condition based just a years. Is this possible?

    Hello
    SUBSTR only works on a string. To extract parts of a date, you must use the TO_CHAR command.

    For the year, you would use this: TO_CHAR (the_date, 'YYYY')

    To_char takes 2 switches, the date to be handled and the part to be extracted, with the portion between apostrophes.

    Once you get used to manipulate dates as this other common areas are: DD - extracts the day of the month, MY snippet code to 3 characters for the month.

    For example, you can use this: TO_CHAR(sysdate,'DD-MON-YYYY') and it converts the current date, June 7, 2012 to June 7, 2012

    Hope this helps
    Best wishes
    Michael

  • How to interpret the data cache setting and the current value of data cache?

    How to interpret the data cache setting and the current value of data cache? We found that even, we configure a larger data cache in Essbase 2 GB for example, the current value of the data cache is always much lower. Does that indicate an activities of data at very low recovery or something else?

    Thanks in advance!

    Hello

    When a block is requested, Essbase searches the data for the block cache. If Essbase is the block in the cache, it is immediately accessible. If the block is not found in the cache, Essbase in the index for the appropriate block number and then uses the index of the block entry to retrieve from the data on the disk file. Retrieve a block requested in the data cache is faster and therefore improves performance.

    So as you say that its current value is much lower then % is very low, that a requested block is in the cache of Essbase data.

    Hope that respond you to the.

    Atul K

  • Window7 has an attribute of file for reading only the value that requires a reset, how can I?

    I just dated windows from vista to windows7, when I went to play WOW, I got an error message because a read only attribute was introduced thyat opposes writing data to files. I read several answers and tried everyone. I can't always reset this secret attrtibute, whats Suur or should I go back to vista if I can.

    SUCCESS, IT WORKED!
    Reinstall your games in one that is NOT located in Program Files.

  • Read only the SPI using the box USB-8451

    I am using the NI USB-8451 box to read the SPI of a Honeywell digital pressure transducer data.  The difficulty comes from that part of Honeywell uses only the SPI in half-duplex mode, meaning that it only transmits data, but does not require anything beyond the appropriate chip select signal and SCLK to start transmitting its 32-bit sensor data.  To facilitate experimentation with the sensor, I bought a USB-8451 SPI Interface thinking I could easily configure the 8451 to read data from the sensor.

    However, if I understand the situation, there is a problem.  The 8451 considers full duplex data, i.e. a data word must first be sent to the SPI device in question before the unit will start to transmit back data of its own.  And since the MOSI data writing periods, since this particular device starts transmitting immediately once a clock is applied, synchronizing the unused address data will cause the unit will return its data before the 8451 begins listening for data in return.  The call used by the 8451 to write read action can be divided into the individual reading and actions of writing of any kind that I could discover.

    Can someone tell me if I missed something in this operation or if there is some quick tips, that I could use to be able to use the 8451 therefor?  Thank you!

    Doug G.

    Exactly correct. It's nice when things are easier than expected. Hope it works as easy as it sounds.

  • How to interpret the numerical values of SQL_ColType()?

    Hello

    After the execution of:
    ..
    Call SQL_Connect("abcDB","user","pw","") ' abcDB is an ODBC link to my Mysql 5 database
    Call SQL_ExecDirect ("SELECT id, temperature, tsdat FROM v$ _header WHERE id")< 1000")="">
    ..

    > the SQL_ColType(1..ColumnNo) variable shows me the data types of each column to a numeric value, for example:

    SQL_ColType (1) = 4
    SQL_ColType (2) = - 9
    SQL_ColType (3) = 93

    What real data types are behind the values? It would be nice to get a complete list of all possible values?

    Thank you.

    Hi ddehn,

    The SQL_... orders () are the old method for DIAdem to connect to SQL databases, using the ODBC approach.  Since the tiara 10.2 the ADO approach is the recommended method.  This is the function that I used to use to make sense of the values SQL_ColType():

    Function GetODBColTypes()
    Dim j, jMax, ChTypes
    jMax = SQL_ResultCols
    < 1="" then="" jmax="">
    ReDim ChTypes (jMax)
    FOR j = 1 TO jMax
    IF SQL_ColType (j) = 93 THEN
    ChTypes (j) = "DateTime".
    Else if SQL_ColType = - 1 OR SQL_ColType (j) (j) > 8 THEN ' STRING
    ChTypes (j) = "String".
    ON THE OTHER
    ChTypes (j) = 'number '.
    END IF ' SQL_ColType (j)
    NEXT ' j
    GetODBColTypes = ChTypes
    End Function ' GetODBColTypes()

    Brad Turpin

    Tiara Product Support Engineer

    National Instruments

  • Where can I find the numerical value for GenICam standard pixel formats?

    I am putting in place a structure of case for the reconstruction of image formats using the pixel as IMAQdx output format. Confirmed the consistent property of 'Pixel Format' numeric U32 in id IMAQdx from camera to camera, but it's just a number, and I don't see that the number of image formats used by the cameras I (I need code for other formats I've yet to see). The GenICam standard 1.1 supports 52 image formats, and no doubt IMAQdx has a corresponding U32 value for each format. Where can I find this list? The .pdf for the GenICam standard lists the formats available in name only and does not have a corresponding numerical value.

    Hey Nasgul

    The attribute 'PixelFormat' is actually a list of name/value pairs. For GenICam cameras (such as GigE Vision) these names and these values are determined by the camera, no IMAQdx XML file. The names themselves are normalized by the part of the "Standard feature Naming Convention" of GenICam (but aren't their values).

    I think you speak for the Format of Pixel property node. I think you are right that it is a digital. It's probably because the available modes can not be known before you actually run the code and the LabVIEW enumeration values must be known when editing, no compilation. The node itself as a digital is probably as a relic of the firewire interface. It would be probably more useful as a string, I imagine.

    You probably want to use the generic way of manipulating the attributes instead. You initially set the property 'Attribute Active' in 'PixelFormat' and then you can then query a list of name/value pairs available or simply set the value. IMAQdx allows you to set the value directly as a string (using the standard names) rather than having to translate it into a numeric value.

    Eric

Maybe you are looking for

  • graphic recording as image?

    Is there a way to save scatterGraph xy in .net as a image such as tiff file? Thanks in advance.

  • smoking NEC 6023E FPGA

    We had 2 6023e boards go bad on us. The NEC D65654 FPGA on the Board smoke. None of the protection of conditioning and surge of the signal, that ics are visibly damaged. And the FPGA is the furthest connector/o chip. What could cause this? I want, I

  • I can not get the updates from the Windows for my XP Home SP3 site

    I can't get updates - Microsoft site says "the website has encountered a problem and cannot display the page you are trying to display." It also displays the error code 0 x 80070424. I have XP Edition SP3 family. I get the "XP antivirus" thing feared

  • Blue tooth created with windows 7

    I just installed windows 7 and need help setting up wireless blue tooth with my Deskjet 460 printing a. make me no signal wireless to the printer. How can I activate Bluetooth xmitter? Once it is turned on can b. I set up printing wireless using Wind

  • E420S - fingerprint reader, me burning

    I have an E420S and since 2 days I noticed that the fingerprint reader will suddenly HOT, quickly. So hot I have a couple red burns on my palm. I'm out of warranty, so all I can think is uninstalling the drivers for the fingerprint reader, but I can'