Reading problem with string after - stabilizer

Similar Questions

• seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  The 'list' of relevant articles that I know, they are now

  -You can read about the problems in the present statutes and possibly find workaround solutions, particularly in the last

  If you are unable to activate your iPhone, iPad or iPod touch after installing an update - Apple Support

  Apple iOS suspension 9.3 updates for older devices, work on activation fix | IVous

  Apple launches new version of iOS for iPad users 9.3 2 affected by bricking bug | 9to5Mac

  GSM of unfixed addresses Apple iPad 2 Bug with revised Activation iOS 9.3, but the larger question remains - Mac rumors

  If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3 - Apple Support

  9.3 iOS update issues

  Leave a post by: ChitlinsCC

• Diagnostics Windows network, the error reads 'Problem with wireless adapter or access point' and fails to solve the problem.

  «Problem with access point or wireless adapter»

  Hi, I just bought a new laptop & I have the extreme difficulty to stay connected to the internet. When I run Windows Network Diagnostics, error reads 'Problem with wireless adapter or access point' and fails to solve the problem. Help, please... Thank you, Maria

  HI Maria,

  ·         What operating system is installed on your computer?

  ·         You have installed the latest drivers for wireless network card?

  Follow the suggestions below for a possible solution:

  Method 1: Start your computer in a clean boot state in order to check if the applications of third parties or startup items is the origin of the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: See these articles for solve wireless problems:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

   

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

   

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know if that helps.

• Problems with WiFi after put 10.11.2 up-to-date.

  Mid 2011 iMac.  Problems with WiFi after put 10.11.2 up-to-date.  No associated network.  Everything was fine before the update. All the pre 10.11.2 device works fine.  Anyone else having issues?  I have to disconnect and reconnect manually.  WiFi drops every 5 to 10 minutes.  Nothing has changed on the machine something of the update.

  Please do not comment on the age of the system.  Achieve a Mid 2011 arrived at a possible replacement point.  I have many other new Mac at home.  The Mid 2011 is spec'd with 16 GB of RAM, i7 and SSD.  It's always very fast.

  Thank you in advance for the answer...

  Hi Captainsniz

  There are a few things to try. Keep doing this until the problem disappears.

  First of all, if you have not already, shut down the computer completely, wait about 1 minute, then restart.

  Disconnect the wifi network either via system preferences, either by pressing the "Option" key and clicking on the wifi menu bar icon.

  Reset the DHCP lease by going to system preferences > network and show Advanced Options, and then click the button to "Renew the DHCP lease" TCP/IP tab.

  You can delete the wifi network of system preferences > network > network name... then close system preferences. Then reopen and add the network in.

  You can also restart your wifi router, it erases the old connections. Most of the routers you just turn off and wait a few minutes, then restart. You can also reset your ISP modem if you have a.

  Finally, you can try to reset the PRAM and SMC on your Mac. I'll get this info here on Apple Support KBs for your particular Mac.

  Be sure to back up your computer.

  Hope this helps, Greg

• Problem with string to Int conversion

  Dear friends,
  
  Problem with string to Int conversion
  
  I'll have a column where most of the values is digital. Only 4 values are not numeric.
  
  I have replaced the non-numeric values to numeric in order to maintain the data type.
  
  Grade.Grade DEAL WHEN "E4" THEN "24' WHEN 'E3' THEN '23' WHEN 'E2' THEN '22' WHEN 'E1' THEN '21' Grade.Grade OTHER END"
  
  This is the result as inactive
  
  Grade
  
  _0_
  
  _1_
  
  _10_
  
  _11_
  
  _12_
  
  _13_
  
  _14_
  
  15
  
  _16_
  
  _17_
  
  _18_
  
  _19_
  
  _2_
  
  _20_
  
  _21_
  
  _22_
  
  _23_
  
  _24_
  
  _3_
  
  _4_
  
  _5_
  
  _6_
  
  _7_
  
  _8_
  
  _9_
  
  Discount
  -            -            -
  
  Now I want to convert this value in digital and do some math
  
  So I changed the formula as below
  
  Cast (CASE Grade.Grade WHEN "E4" THEN "24' WHEN 'E3' THEN '23' WHEN 'E2' THEN '22' WHEN 'E1' THEN '21' Grade.Grade END as an INT. ELSE")
  
  
  Now I get the following error
  View display error
  Driver Odbc _ returned an error (SQLExecDirectW). _
  Error details
  Error codes: OPR4ONWY:U9IM8TAC:OI2DL65P
  _State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 17001] Oracle error code: 1722, message: ORA-01722: invalid number in the OIC calling OCIStmtFetch. [nQSError: 17012] In bulk fetch failed. _ (HY000)
  SQL issued: SELECT cast (CASE Grade.Grade WHEN "E4" THEN "24' WHEN 'E3' THEN '23' WHEN 'E2' THEN '22' WHEN 'E1' THEN '21' Grade.Grade END as an int. ELSE") seen'Human Capital' 0 - Costing Manpower WHERE LENGTH (Grade.Grade CASE WHEN 'E1' THEN '20' WHEN 'E2' THEN '21' WHEN 'E3' THEN '22' WHEN "E4" THEN "23 ' ELSE Grade.Grade END) > 0 ORDER BY saw_0_
  
  Discount
  
  
  
  
  
  Could someone help me
  
  Concerning
  
  Mustafa
  
  Published by: Musnet on June 29, 2010 05:42
  
  Published by: Musnet on June 29, 2010 06:48

  Are you sure you don't have another non-digital value in your column. I want to get this filter temporarily just to check if your plaster works or not. If it works, then you can remove this filter.

• Problems with mail after switching to macOS Sierra

  Hey all

  After having recently upgraded to macOS Sierra, I am unable to read my mail.

  I get the following error every time I check on "Get Mail".

  There may be a problem with the mail server or the network. Check the account settings "*" or try again.

  The server returned the error: Mail could not connect to the server 'pop1.tribcsp.com' using SSL on the default ports. Verify that this server supports SSL and that your account settings are correct.

  What does this error message mean and how can I solve this problem.

  Thank you

  Hi Michael,

  I see your message that you get an error in the mail indicating that there is a problem with the mail server or the network.  To help get this problem resolved, I suggest that you follow the steps below:
  

  If mail refers to a problem with the mail server, or the network

  Mail will say that it is impossible to connect due to a problem with the mail server or the network. For example, the message may refer to a connection that has expired, or too many simultaneous connections:

  

  If you are connected to the Internet, but the connection has expired, your email provider might be affected by a discontinuance of service. Contact them or see their status Web page to ensure that their e-mail service is online. Examples of status pages:

  • iCloud mail status
  • Gmail status
  • Status of Yahoo mail
  • Status of the AOL mail
  • Status of Outlook e-mail

  If the message indicates the number of simultaneous connections, too many of your devices is check your e-mail account at the same time. Quit Mail on one or more of your other devices.

  If you are still unable to send or receive e-mails

  1. Make sure that you have installed latest version of the Mac software updates, especially if the problem occurred immediately after the installation of a previous update.
  2. In OS X El Capitan or later version, you can see a status icon and the short error message in the upper right of the Mail window, under the search box. The message may indicate 'Network offline' or 'Connection failed', for example. Click the message to see more details on the issue.
     
  3. Check your connection to the Mail connection doctor. It might be able to say more on the issue.

  If you cannot send or receive e-mail on your Mac.

  Take care.

• Analog multichannel peculiar read problem with PCI-6014 - hardware problem

  Hi all

  I see some very special behaviors with a 6014 when I do a multi-channel analog playback.  I am revamping of existing code to a customer, which implies the passing of the traditional DAQ in the DAQmx.  Traditional DAQ does not use a system based on the tasks, my client was in the process of reading clocked by the software for only one channel at a time, depending on what signal was of interest to both.  (application is a series of tests on a control PCB who will interface with some hardware, checking the answers and tensions and others)

  When I rewrote the application using DAQmx, I created a single task that contains all of the analog inputs of the map (AI0:15).  When I am interested in a particular signal, I indexed the channel since the reading chart data.  The strings that contain the actual data are 0, 1, 3, 4, 5, 6, 7, 13, 14 and 15.  All channels are NRSE.

  One of the signals of interest lights AI7.

  When I connect the AI7 signal with an oscilloscope, I read 2.5V - which is exactly what I expect to see.

  When I read AI7 using MAX, I read 2.5V.

  When I read AI7 by itself using a single channel DAQmx reading (i.e. 1 Samp 1Chan or 1Chan N Samp), I read 2.5V.

  When I read AI7 simultaneously with all the channels that have a greater number of channel (i.e. AI8-15), I read 2.5V.

  When I read AI7 simultaneously with any channel that carries a lower channel number (i.e. AI0-6), I read 2.34V.

  ?????

  For example, if I read AI0:15, I read 2.34V on AI7.  If I read AI0:7, I read 2.34V.  If I read AI7:15, I read 2.5V.  If I read AI7:10, I read 2.5V.  If I read AI6:7, I read 2.34V.  And so on.  Any combination of playback channel which includes results AI0 AI1, AI2, AI3, AI4, AI5 or AI6 during a misreading on AI7.

  All channels read because they are supposed to, no matter what channel is included in the job.  AI7 is the only one that illustrates this behavior.

  I wrote code for the acquisition of data for 10 years now and I have never seen anything like this before. The behavior is consistent.  I am sure that it is a hardware problem with the Special Commission that I use.  That's the advice of my customer, I don't know when they bought it, but I think they have had for years.  I doubt that ever, it has been calibrated.

  I guess it's more I'm curious than anything else - what on earth would cause this behavior?

  I'll tell my client to replace the card, if really I just asked my own knowledge.

  
  

• Problems with WIFI after sleep-wake up.

  -Wifi does not randomly after coming out of sleep.
  -Sometimes it can see the network with at least 2-3 bars, but does not connect and the Troubleshooting Wizard offers no help.
  -wifi only way to recover is to uninstall the wifi adapter driver in Device Manager and then reinstall it, and then it works fine.
  -This problem only occurs when I am a little close to the edge (still a lot within wifi range) of the router. otherwise, IE very close to router, there is no problem at all.
  n ' has not had any problems with windows 7 at first, but wifi problems randomly started upward. uninstalled the 2-3 most recent programs with Revo Uninstaller.

  Notes: thinkpad x 61 Tablet, fresh running windows 7 (not upgraded), card express 11 a/b/g wireless lan mini pci, router is an apple Airport extreme from 40 feet away with WPA2-Personal Security.

  Hey art vandelay.

  Welcome to the Microsoft Answers community.

  I suggest you try the methods one by one and check below.

  Method 1:  Uncheck allow the computer to turn off this device to save power option in Device Manager and check.

  1: click on start, go to control panel. In Control Panel, click small icons to DISPLAY.
  2: find the network and sharing Center and open it.
  3: on the left side, you will see an option that says "change the map settings. Open it
  4: you'll be there, two local and wireless connections. Right-click on WIRELESS one, and then select Properties.
  5: now, click on CONFIGURE.
  6: you will see 5 tabs, click on the last one that says "power management."
  7: now simply UNCHECK the first box that says "allow the computer to turn off this device to save power".

  Method 2: Perform the cycle of power modem/router.

  (1) turn off the power to the modem (unplug). If there is the router turn off the power (unplug).
  (2) unplug the Ethernet cable that connects the modem to the back of the computer or router on the back of the computer. Disconnect at the end of the computer. If there is a router, follow the same steps, disconnect at the end of the computer.
  (3) shuts down the computer (not restart).
  (4) wait at least 4 minutes.
  (5) switch on the modem. If there is a router enable the router as well. Wait for the lights on the modem\router to stabilize.
  (6) connect the Ethernet cable to the computer.
  (7) turn on the computer. Now, try to connect to the internet.

  Method 3: The restore of the system on your computer.

  System Restore will take your computer state permeable when it did not face such a problem, this can be done by selecting the correct restore point.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next.
  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.
  4. click on finish.

  For more information visit http://support.microsoft.com/kb/936212/

  You can also try methods provided in the article.
  http://support.Microsoft.com/kb/928152

  Hope this information is useful.
  Let me know if it worked.

  Thank you, and in what concerns:
  Umesh P - Microsoft Support

• Problems with scrolling after update

  IM currently using the BlueJ ide and after updating to the new system / update (macOS Sierra) there is significant lag / jitter when scrolling. This problem only occurs when you use the scrolling with two fingers with the touch pad. When I use a mouse / or click the scroll bar on the side, it seems to go well. Not sure if there is a problem with BlueJ or the new OS. Would be very interested for some suggestions on how to fix this very annoying problem. (Using a Macbook pro 13, 2015).

  Thanks a lot to all the answers

  The obvious question would be if you see the problem of scrolling in Mac OS standard applications such as Mail, Notes and Safari.

  If this isn't the case, it is likely BlueJ.

• Big problems with fonts after upgrade to Yosemite

  Hello

  I upgraded my macbook pro to Yosemite for more than six months and since then, I have serious problems with application of fonts in browsers and many software I use. I googled the problem over and over again and nothing seems to help.

  In general, these are the main symptoms of the problem with screenshots:

  1 system ads are gibberished, or better yet, appearing with something like that, instead of letters:

  

  2. bold letters does not at all (when I use gmail, for example) or leads to an illegible font change:

  

  3. hyperlinks symbols on Web sites or webmail applications simply appear as empty squares and there is no way of knowing what you click on.

  

  Bottom line: before turning to the last option and the resettlement of Yosemite, if someone could help, I'd be more than grateful.

  < image edited by host to remove the serial number >

  You probably have a lot of fonts installed garbage. Follow these steps to recover your Mac for only the fonts installed in OS X.

  (1) open the book fonts and choose restore fonts Standard menu. All third-party fonts will be moved out of the system and root of the fonts in the library files in a new folder next to each named (deleted) Fonts.

  2) click on the desktop so Finder is the name of the app next to the Apple logo in the upper left corner. Hold down the Option key and choose go > library. This will open your user account's library folder. Create a new empty folder on the desktop. Open the folder fonts in your user account. If there is something in it, move them to the new folder on the desktop.

  3) restart in Mode safe mode by rebooting and hold down the SHIFT key. When you reach the office (you need to log in Mode without failure), restart normally. Among other things, this erases all the cache files on the account of the user logged in Mode safe mode and resets the database of book of fonts for this account.

  (4) clear all remaining the system font cache files. Close all the running applications. From an administrator account, open the Terminal application and enter the following command. You can also copy and paste from here in the Terminal window:

  sudo atsutil databases - remove

  Terminal will then ask your admin password. When you type, it will not show anything, so make sure you enter it correctly.

  This command removes all the font cache files. To the system and the current connected to the user account. After you run the command, close Terminal and immediately restart your Mac.

  Now test. With only fonts available provided OS and all data policies implemented cache and other such parameters cleared and reset, fonts should appear correctly in the system.

• Satellite L70-A-118 - problems with WiFi after Windows 8 to 8.1 Win update

  Dear Sir/Madam,

  After that update of Windows 8 for Windows 8.1 WiFi disconnects regularly and if there is a connection
  the connection is limited.

  I followed the update instructions I downloaded with the Windows 8.1 drivers.

  The WiFi LAN adapter settings are intact on DHCP.

  Waiting for assistance to help me a stable wifi connection.

  Kind regards

  Low van Leeuwen

  Two weeks ago I've updated my Satellite U940-103 and everything went well. There is no problem with WLAN. I use it all the time.

  What model of laptop do you have?
  Have you installed the driver for the Toshiba download page or driver provided by Windows update (sometimes classified as important update)?

• Problem with Safari, after update

  I use a MacBook Pro, OS X Yosemite, 10.10.5 - and after the last update, I have problems with Safari (version 9.1). Some Web pages I visit every day is more responsible (I get the message that the page needs to be recharged because she failed the first time, but this does not work then either). This problem started just after the last update. Does anyone else have this problem? What I have to go back to the previous version or can I fix this problem?

  If you have problems to open Web pages, take a look at these techniques proposed by Apple of troubleshooting.

  https://support.Apple.com/en-us/HT204098

  Go to the Safari menu (at the top right of your screen next to the Apple icon), choose 'Quit Safari'

  Press the "Shift" key and while holding this button on your unique keyboard, click the icon of Safari on your Dock.

  Open Safari - Preferences - Privacy - data to remove any Web site.

  Open the menu to go with the Option (Alt) key - library - key locate Safari folder and place it on your desktop. Restart your Mac, open Safari and delete the file from your desktop.

  Also, try the following steps:

  Restart your Mac.

  Try to start:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once your Mac boot, restart dhcpd as you usually do.

  If this does not help, follow the instructions below:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once you see office, start a scan Disk Utility to detect and repair file system errors (remember to choose your primary hard drive)

  -Click on the disc to check, then, if requested to solve the problems on the repair disk

  -After that click on verify disk permissions, and then click Repair disk permissions

  -Once the process is complete, stop your Mac and turn it on again after 30 seconds

  I hope this helps!

• HP laptop - 15-r150nm: problem with wifi after update realtek adapter

  Hello! I've updated some drivers of HP customer service and then restarted computer. When it is on I couldn't use wifi. When I select the problems, it says: 1) "" Realtek 802.11B/G/N WIFI adapter RTL8723BE has some problems to the program control or hardware. "" (it is Croatian, so I tried to translate it for you)

  (2) "a network cable is not plugged in correctly or may be broken.

  What should I do, I have only this laptop and internet wifi, write this work? Thank you!

  Hi @frane53nja,

  Welcome to the HP Forums!

  This is a wonderful place to find answers and advice!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

  Learn how to post and more

  I understand that your laptop works OK and after updating drivers on reboot HP customer service, you have lost your wireless network. When you run the Windows troubleshooting tool, you received a message that there was a problem with the NIC due to recent hardware or software changes.

  Here is a link to HP PC - troubleshooting wireless network and Internet (Windows 8) that should help you.

  Before you perform a restore, as shown in the above troubleshooting steps, you can try this option.

  Go to the nursery of the device

  Click the network tab to expand the list.

  Right-click on the wireless network adapter and select roll back driver.

  Repeat this process for all types of adapters listed.

  While on this screen please check this definition also.

  Right click on the wireless adapter and choose Properties.

  Click the power management tab.  If "allow the computer to turn off this device to save power" is checked, please remove and click OK. Repeat this operation for all types of adapters listed.

  Please let me know the results.

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as you. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts please click the Thumbs Up below.

• problems with sound after installing windows 7

  My sound/audio does not work on my HP Pavilion dv2023tu notebook after a clean installation of windows XP.

  The convenience store said there is a problem with the driver, but I can't find a new driver through windows update, and HP does not either for my model. The device installed on my laptop is called high definition Audio Device. Can anyone help, if not, where can I download the drivers from. It is better to buy driver update software to help locate the right driver?

  Hello

  A lot of Vista for Windows 7 drivers, so try the following.

  Download the Audio driver from the link below and save it to your desktop.

  FTP://ftp.HP.com/pub/SoftPaq/sp34001-34500/sp34387.exe

  Once the download is complete, right-click on the Setup program and select "Run as Administrator" to launch the installation.  If the driver installs successfully, restart the computer and check your audio files.

  Kind regards

  DP - K

• Pavilion p256ur: problems with Wifi after waking up (only)

  I have a problem with my new laptop Pavilion p256ur. After he wakes up (only) the wifi (Broadcom BCM 43142) adapter does not. turned on in device management, it can not find any network. WiFi button (in the system settings menu and status bar) don't respond - it seems that the wifi is turned off. I try to:

  1 power off and power on this card in Device Manager

  2. turn off power off (to save energy) option in the settings of the adapter

  3 (default) old uninstal and install the most recent drivers

  4. install the latest driver for chipset

  5 control wlansvc service-, she strives to after wake up

  but his do not solve the problem.

  If I try to reinstall the drivers wifi after last stride upward of his works, but until the next morning to the top.

  In an event list management device devices there is a message:

  Bcmwl64.inf_amd64_0f3430bbd776c163\bcmwl64.inf installation driver for device with ID PCI\VEN_14E4 & DEV_4365 & REV_01\0000E2FFFFCDD85D00 & SUBSYS_2230103C, supplemented by the following condition: 0x0.

  After the system restart wifi works correctly, so if I want to use the wlan I must not sleep notebok. but restart it every time (or reinstall the drivers) is not comfortably. can you help me please?

  Hi @Medvejo,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your 15-p256ur HP Pavilion Notebook and Wifi problems after wake up. I see that if you change the balanced power plan options option in the book will help. Here is a link that will help you. Go to your power options. Select balance, then click on change plan settings. Click on change advanced power settings. Click on choose what the power button. Figure: 13 choose what the power buttons. -Uncheck allow the computer to turn off this device to save power under the management of the power supply of the wireless adapter.

  Please let me know how it goes.

  You can say thanks for trying to help by clicking on the Thumbs Up below! .

  Thank you.