Reading takes a long time to start

Even though I have good requirements, I have always problems in execution of Adobe first Pro CS5. Rendered in the preview window (reading) takes long to start and hick-ups in video and audio is displayed. Jump to a point in the script takes awhile, sometimes 10 seconds.

Project

My project contains four media (broadcasting sport event) MXF files, each long about a hour and 20 GB in size. I also imported certain components of an After Effect project. Videos audio files have already peak files, located in the same directory as the original files.

Configuration

Since I thought that the current 4 GB of RAM was the bottleneck, yesterday I bought some extra RAM and have now 9 GB works fine. Here is my configuration of my Dell XPS 435MT:

  • Processor: Intel Core i7 920 (2.66 GHz, 8 MB cache, 4.8GT / sec)
  • RAM: 9216 MB (3072 MB (3 x 1024) memory DDR3 1067 MHz + 6144 MB (3 x 2048) 1333 MHz DDR3)
  • HDD: 750 GB Serial ATA (7200 RPM)
  • Screen: 21.5 inches S2209W Widescreen Trans European Black Value (1920 x 1080) - DVI - D
  • Graphics card: 512 MB ATI Radeon 4850 card graphics card
  • Audio: Audio Integrated HDA 7.1 Dolby Digital capability
  • OS: Windows 7 64-bit


First, preference Setup > memory is 6 for Adobe and 3 GB for other applications. First, the record was good, but after a few minutes, the beginning of a preview takes more time, once again. Sometimes after you quit and restart first, it's going well for a while.

When previews took a long time to start, I started to see performance data. I do not have any other big process, my CPU keeps exhausted and my RAM is fairly constant at 4 GB. So, which seems to be OK.

My hard drive might be a problem? I have a hard drive that is partitioned into two disks, where all programs are on C: and D: contains the project and all the video and audio files (a 60 GB of free space).

Another small thing I spotted is that stuff in After Effects are deposited Summit whenever I open the project. For a specific component on AE, I already count 48 files peak. Other video files don't are not in peak filed again. Is first a new file of the art for all the imported components, even if some components are intact? I don't think this is the cause, but it seems strange.

Are there other things to watch? Any help would be appreciated kindly.

Requirements minimum ages being a DEDICATED for the video player. Adobe is very hard to be quite vague on this subject and many complaints have been posted here, but Adobe foolhardedly continues by saying only what is needed to install the program, do not to use it. Common wisdom is at least two better but three different physical disks.

Tags: Premiere

Similar Questions

  • Satellite M300 PSMDCA takes a long time to start

    I have a Toshiba Satellite M300 PSMDCA - 01800C and there are some problems with it.

    First of all, when you start the computer, it takes a long time to start and activate Outlook.
    I am running Windows 7Home Premium.
    Computers arrow where I bought the computer told me that it can take up to three hours to go back through each process at startup?

    Is it normal that all I wanted was a simple portable easy fast, but it seems that I am stuck again.

    Also, when I go back to the computer, even after some time the mouse it does not provide new and pushing the Start button just a blank screen. Alt + Ctrl + delete, then he activates Windows again and then after having put my password and I have to wait for that be again loaded everything that takes so long. Any ideas?

    Also I often get the message when the computer starts "error has occurred in Toshiba PC Health Monitor. He will leave the application. "Main.frm.cpp (184). Any ideas?

    Quite often when I am scrolling with the mouse, the screen will turn black and flash and a message «the NVIDIA display driver... couldn't Reg...» "and he will correct itself after awhile. Frustrating!
    Quite often when scrolling on the websites of the page I'm going to freeze?

    I use MS Office 2010 and there is a problem trying to save Word documents and a message comes up with "a file permission error.

    Any thoughts? Thanks, Shirl51

    > First of all, when you start the computer, it takes a long time to start and activate Outlook. I am running Windows 7Home Premium. Computers arrow where I bought the computer told me that it can take up to three hours to go back through each process at startup?

    This nonsense!
    The system should boot up quickly my laptop needs 30 seconds to start.
    In my opinion, the system is screwed

    In your case, I recommend to reinstall the system.
    Did you create the recovery disk?
    If this isn't the case, I think that detailed instructions should be placed in the user's manual.

    After the recovery of disk has been created, restore the system, BUT save the data before doing so because the recovery disk would be to format the HARD drive and you lose data!

  • With 32-bit and a clean install also takes a long time to start and a very long time to stop.

    I use 32-bit and a clean install also, it takes a very long time to start (and sometimes it will not) and a verlong tike to close

    Hello Duane,

    For more clarity and response, I divided it in its own thread.

    After your post, it seems that Vista 32 bit takes a long time to start and a very long time to stop.

    What are the specifications of material of this machine?

    We might want to try a clean boot and see how that affects the issue.

    More details about this is located at the following link:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    Let us know if this helps solve this problem.

    Best regards

    Matthew_Ha

  • Z10 Z10 Blackberry BlackBerry takes a long time to start when the parameters "SIM card PIN lock" is activated

    Device: BlackBerry Z10
    Model: STL100-1
    Software version: 10.2.1.537
    OS version: 10.2.1.1925
    Carrier: Beeline (KZ)

    Z10 takes a long time to start when the parameters 'SIM card PIN lock' is running

    Tried to activate or disable this setting, the result:

    On - 5 min 13 sec (on-screen progress bar has reached 100% for ~ 1 minute, then waited for another 4 minutes in this State)

    Off - 1 min 17 sec

    What is the problem of the time difference?

    Good, thanks

  • Visual Studio 2008 Pro takes a long time to start after the installation of measurement Studio 2009

    After installing Measurement Studio 2009, I noticed that it takes a long time (30-60 seconds) to open a Visual Studio project.

    I do not have an internet connection on my development computer and suspect he might be waiting on some kind of operation of the network to time out.  I had problems with Visual Studio in the past as well and had to work around them by adding entries to my hosts file (to redirect some addresses of Microsoft to the local IP address - this causes network operations to expire immediately).

    Just curious if anyone has encountered this kind of slow startup time and found a solution.

    Thank you!

    I found an article referring to a question similar to MS 8.1.  I don't know if the problem has simply not been corrected or why I am still having this problem.  Workaround "per computer" listed in the article solved my problem.

    http://digital.NI.com/public.nsf/allkb/18E25101F0839C6286256F960061B282 I have

  • Computer HP laptop 14-d004tx - takes a long time to start whenever I turned it on

    It really bothers me that my new laptop, (just a week) when takes a lot of time before it starts. After the HP logo, it displays a blank page where my cursor can be moved, so he'll stay a very long time so I find myself stopping and then turn on again and again until it finally starts.

    Is this normal? It really takes a lot of my time specially I use my laptop for work. What should do?

    Thank you! I really need help here...

    Hello

    Since it is a week it would be better to contact HP in your area & report it.

    Meanwhile, a test of full hard disk & memory test by pressing F2 or F10 as soon as you turn on the system and on entering the BIOS, pass-> component test system Diagnostics.

  • 7 OCX WMP on Windows ce 6.0 R3 takes a long time to start playback of video files.

    I try to use the WMP OCX 7 under windows ce 6.0 R3. My application written in c# and works fine, the only problem is the time it takes to start plaing a video file. I noticed that the more the file is large the longer it takes to start. With the debugger, I tried to step of the procedure of game, and the statement that takes all the time is the parameter of the URL property of the OCX.
    Have you ever seen something similar? Can you help me solve the problem? I have not found information about this behavior in on line documentation.

    Hi Danisan,

    Since you are facing problems with Windows CE, you can ask your question in the following MSDN forum to improve assistance:

    http://social.msdn.Microsoft.com/forums/en-us/category/EmbeddedWindows

  • After reformatting Windows 7 laptop takes a long time to start and load office

    hiiii! I use the computer hp 620 laptop. who has windows 7 Home Edition premium installed with 4 GB of ram. c drive partition size is 250 GB. When I start my laptop it takes * a long-term on windows startup. then once this process is completed it must also load the desktop. I recently formmated my pc. 2nd question:-when I right click on my computer and click Properties. It shows the memory of 4 GB installed and usable 2.90 GB usable. I use windows 7 64-bit edition Home premium. Wait a rply

    First of all, I would like to launch the troubleshooter of Performance to see if there are problems.
    Then, use the steps listed in optimize Windows 7. This will usually help the most to get the best performance from your system.

    (1) open the resolution of performance issues by clicking on the button start , and then clicking Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under system and security, click on search performance issues.

    (2) use the following link as a way to improve and optimize your configuration of Windows 7.
    http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance#section_3

    (3) you can review how to speed up your computer.
    How to make a computer faster: 6 ways to speed up your PC
    http://www.Microsoft.com/atwork/maintenance/speed.aspx#fBid=A3wXPV89pfU

    (4) If you have not already, delete the temporary Internet files of Internet Explorer. Loading these files can sometimes slow down the startup of your.
    Article number: 260897 - How to remove the content of the Internet temporary files folder
    http://support.Microsoft.com/kb/260897

    (5) run the Microsoft Safety Scanner to check that you don't have malware or viruses on your computer. They can slow a computer at startup too. This is a free download.
    You can download from the following link:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Hope this will help you with your computer start faster.

    Sincerely,

    Marilyn

  • iTunes takes a long time to start because I have upgraded to Windows 10

    I upgraded from Windows 7 to Windows 10 a few months back.  Since iTunes then takes like 10 minutes to start.  I tried the setting in compatibility mode for Windows 7 and the other versions.  I tried to run as an administrator.  Nothing seems to work.  Is there a kind of diary where I might be able to see where it hangs at startup?

    Thank you

    Jim

    You should try to completely remove iTunes. Follow this link:

    Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

    Download and install the latest version of iTunes from http://www.apple.com/itunes/download/ 12.4.1

  • Applications sometimes take a long time to start on my iMac to 2013

    On my other 2 Mac (macbook pro running Mavericks and mini mac running Snow Leopard - both with 8G of RAM) are super fast and responsive. My newish iMac (2013) with 8G seems to take time to log in (sometimes) applications. After I reboot, think is great, after a week or two, things slow down. Especially after that I have wake the computer and try to do something (with the applications that are already running). I keep the reader all the time.

    I ran EtreCheck and found a few red elements on insufficient RAM.

    Launch system officers:

    [loaded] 6 tasks Apple

    [loading] 148 tasks Apple

    [operation] 64 tasks Apple

    [killed] 18 tasks Apple

    18 killed processes lack of RAM

    Launch system demons:

    [loaded] 43 tasks Apple

    [loading] 143 tasks Apple

    [operation] 84 tasks Apple

    [killed] 17 tasks Apple

    17 killed process lack of RAM

    I can post the report as a whole if anyone thinks it would help.

    I thought that 8G only is not enough. I am running the latest version of El Capitan. I am considering getting Apple to add more memory. The iMac, I replaced was under Snow Leopard and was super fast, also with 8G or RAM.

    I had the hard drive replaced a few months (under warranty) because she could not and was the reason for which that my machine was not long like a dog, but now it isn't bad, until it starts to slow down.

    One last thing...  We have 3 users on the iMac. All signed at the same time. We do not have something strong, just email, browser, calendar and the application of greater occational.

    Thanks in advance.

    Do not post the full text of the report. A 8 GB computer shouldn't have killed during the launch of the process. Before running the program, restart the computer so that we can see what it looks like charges.

  • Satellite U500 - take a long time to start Windows

    Hello. How are you all? I need your help.

    my laptop Info: Satellite U500 - 18K (PSU8SE) operating system: Windows 7 64-bit

    My problem:
    My time to take cell phone longer than usual to start windows and that I know and look for changes in startup programs list but cannot find changes, I have also all the necessary updates for my laptop and there are no performed by viruses.
    I tried to use system restore, but it has not solved the problem...

    So please help me to get the solution?

    You should check if the tempro installed on your computer, this utility can cause a lot of time to boot. Also check if installed face recognition software

  • Problem with Windows XP takes a long time to start

    Hello, I am running Windows xp3 House. I have a problem with my firewall loading Windows. It takes about 2 minutes to load and it is that nothing works (Avira antivirus, Lynksys wireless monitor, etc.) until it starts. Sometimes it loads immediately, and then it's not? Weird. In a search, I found this, http://support.microsoft.com/kb/823612 I ran it.

    He stopped and not responding so I had to turn it off and restart it manually. When I did I got a pop up telling me to activate my Windows, 3 days to activate. I did nothing to mess with windows, it has been installed on my pc when I bought it used and I have no cd or manual as I assume that it is installed at the factory. I know not where the i386 file is and have never been able to actually identify because I'm familiar with it. If my pc becomes unusable because of that I won't be able to use it and I don't know what to do. I did a system restore and it did not work. How to activate Windows if I must / I have to? How can I stop it? I don't know what to do and I need help. Thank you
    Dell Computer Corporation Dimension 4600
    Windows XP Edition Service Pack 3 family
    AVIRA Desktop Version 12.3.0.15
    Linksys Wireless-G PCI adapt
    Piriform Ltd - CCleaner Version 3, 20, 0, 1750
    SUPERAntiSpyware Version 5,
    GlarySoft Ltd. - Glary Utilities Version 2.46
    Malwarebytes Anti - Malware Version 1.60.0080
    GlarySoft Ltd. - Glary Utilities Version 2.46
    It is quite possible that all your problems are due to this dangerous program!

    Of course, any software can have a phenomenon of chance but, I have been using Glary Utilities for years and have never had a single problem.

    To the OP

    Malwarebytes Anti - Malware Version 1.60.0080

    I guess you use Malwarebytes as a scanner at the request since the version you list is obsolete. There are several malware that can cause false activation. My advice to you is first, make sure your computer is not infected. To do this you must first update Malwarebytes and run a full scan. Once that is completed and you have deleted everything which, on the contrary, that was detected you should do the same with SuperAntispyware. View your results.

    On another note, by the unlikely chance, you have the professional version of Malwarebytes and SuperAntispyware know you can't run both at the same time by using the real-time protection. As long as you use one of them as an on-demand scanner, you're ok.

  • Windows XP SP3 computer takes a long time to start and stop

    original title: where to get support for Win XPsp3?

    computer takes long to START and CLOSURE and the search can't find anything

    Try to carry out the instructions in the link below firstly to improve the speed and performance of your computer:

    http://www.Microsoft.com/windowsxp/using/Setup/expert/northrup_restoreperf.mspx

    In addition, you can get technical support for Windows XP by using the link below. In the link provided, simply select the appropriate version of Windows XP you are using. You have the ability to chat, e-mail or telephone.

    http://support.Microsoft.com/select/default.aspx?target=assistance&C1=509&

    You can also get in touch with them by calling the 800-936-5700. Their opening hours are from Monday to Friday from 05:00 - 21:00 and Saturday-Sunday 06:00 - 15:00 Pacific time.

  • Why dose my laptop take a long time to start?

    My lap top takes 3mins to start why?

    Hello

    Three minutes is not long however you can probably cut that with these methods.

    You can use these to control which startup programs. Many others who settle start-up are not
    really need to be there. As Acrobat Reader (Adobe), Agent of WinAmp and many others who
    load chunks of themselves to start more quickly (not a problem on the machines of today ' hui) and to make sure that they
    can control the files they support (to be sure that you continue to use only). Those who are not common
    examples and not meant as a slam on these programs very well.

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135
    How to check and change Vista startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    Autoruns - free - see what programs are configured so that it starts automatically when
    your system boots and you connect. Autoruns also shows you the complete list of the registry
    and where applications can configure Auto-start for the files settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

    -------------------------------------------------------------------------

    Performance and maintenance tips
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Since the update to 36.0.1 Firefox takes a long time to start.

    V36.0.1 has been installed automatically yesterday and since then, it takes a minute or two so that it starts every time. I nhave tried to do a clean reinstall, and it made no difference. Any help would be appreciated.

    Hi dwilden, other users have reported that this problem was caused and can be solved by adjusting the parameters of their norton running affected systems software: https://support.mozilla.org/en-US/questions/1048938#answer-696520

Maybe you are looking for