Reading text file and graphic

Hello everyone. I'm new to Labview and have started using it only a week ago. My advisor gave me a difficult project and I'm stuck. My goal is to recover data from a Keithley instrument by setting voltage and current measurement. I could find a driver to do, but now he wants me to take my measurements and make a different chart that is already in the driver. The graphic I get is for X vs Y that has tension on the horizontal axis and the vertical current. After I receive this information, it is then saved in a .txt file. Which wants me to my Advisor, is to take the values that are recorded and divide (V / I) which is equal to the resistance and then to draw resistance depending on the tension. Since I am very new to Labview, I have trouble reading the text file, strength design values and the tracing result. To add to my troubles, the computers I use have only up to Labview 7.0 Express. If anyone can help me please, it will be greatly appreciated because I would rather graphic using Labview values instead of using Microsoft Excel. Thank you.

Sorry, misunderstood how you want to display the data. The first table seems to be the tension and the table that is the output of the divide is the resistance. Instead of build table and a graphic waveform, you'll want to use the bundle where the upper entrance is your x axis and the background is the y axis and sire of the output of the present in a XY Chart.

Tags: NI Software

Similar Questions

  • How read text file and decode

    Hi, I have a file which consists of 2 columns, it is first of all time/date stamp and 2nd is ON / OFF text.

    I would like to determine the time when the text is ON or OFF.

    I am not able to analyze the data in separate columns 2 and then read, can someone help me on this?

    The example of the file is attached.

    I was going to throw away the solution, but bob and cruz are probably right, that he is HW.

    What is the problem with your vi above, is that you are matching the model from the OFF, but you don't have a table, so your search through your entire text file and on the OFF first display you text in front of her. You must first create a picture of your spreadsheet from the read text file string. This can be done either by using a string of worksheet function array or as cruz said the spreadsheet file. Im not sure of your desired end result, but from there you can feed in a for loop and find each item ON or OFF.

    That should help you get started.

  • Reading text files and databases

    There the good tutorials on read/analyze the text files and databases out there? I've been looking around, but I can't really find anything.

    Yes - Here are some links:

    http://gotoandlearn.com/play.php?id=168

    http://forums.Adobe.com/message/4674478

  • How read text file and store it in the database

    Respected by all,

    I have the text file on my computer.
    I use forms6i and oracle 9i.
    I want that when I press the button then specifice world in text file is read and display on the form to be stored in the database.
    Please provide a solution.

    Kind regards

    Hello

    Studying the functions of the package TEXT_IO()

    http://www.Oracle.com/webapps/online-help/forms/10G/State?navSetId=_&Navid=3&vtTopicFile=f1_help/Oraini/c_text_io.html&vtTopicId=

    François

  • CFFILE - reading text file and maintenance of line breaks

    I am using cffile to read a text document, then add then display the content of the text document in a file .xml for an atom feed. Everything works fine, but it seems that cffile is stripping on the line breaks in the original file so that the contents of the variable which is save has more no line breaks. Is there an attribute that I'm missing that will control this behavior or I have to go about it in different ways. Thanks in advance for any idea on this issue.

    Why do you say that line breaks are removed?

    If you just say that because when you look at the results in your browser.  Recall that the HTML standard ignores all the line breaks and most other white space.  A quick overview of the source will tell you if the line breaks are there or not.  Using the HTML code

    ...
    Tags is the right way to tell a browser not not to ignore white space in the source.

    But it is possible that somewhere along the process of conversion of text file to XML data line breaks are stripped.  But then, we would need to see significant process pieces for a chance to help you.

  • Reading text file and adding to start

    var file = File(myFilePath);
    file.open("a", "TEXT");
    //alert("file opened! it is: \n" + file);
    
    
    while (!file.eof){ // Loop doesn't trigger here
        var line = file.readln();
        alert("line is:\n" + line);
    }
    
    
    file.close();
    

    CheminMonFichier is a string that contains a file path in a text file on my drive.

    Two issues here:
    (1) why not the time loop trigger? Is expressions of the folklore of the position by default when you open a file for addition? ("a")
    (2) how to open a file for add-to-start (' a + ')

    The case is the following:
    I have a file already existing with some properties of the object. I want to open this file and add additional properties to top/beginning of it.

    This script alert help?

    What new eyes can do, but mine was 75 years old and new new goal is good.

  • Reading a text file and store it in a table, guard return 0.

    Hello, I have an application where I need to read the speed and rate of a text file. For this application, I use a myRIO NEITHER and I want to save the text file on the drive the myRIO aboard in the tmp folder. I simplified my request to isolate the possible problem and I will attach a sample text file and my VI is used.

    Overview:

    I use a myRIO project because in my real application I myRIO VI of PWM and encoder. I noticed that my problem goes away when just open the main VI and run the application in LabView. My problem then that chairs the VI on a project myRIO folder.

    To address the issue:

    My question is, when running the VI of the hand of a project myRIO folder everything works as it is supposed to, but when you open the text file in my Subvi, it returns 0, as if nothing is in the text file. Now if I open the VI outside myRIO se project file it works just assumed that when X = 1, it opens the text file written data in a table and then close the text file. I can't understand why he reads nothing in the text file executing the main VI of a project of myRIO and when I use run to highlight one can see it opens the text file and then returns nothing. The text "test" file must be placed in the tmp folder on board the myRIO to validate my way.

    Is there a way to fix this?

    I assume because I use a myRIO project I can't access the file text, or because of how LabView?

    Any help is appreciated, thanks in advance!

    You don't have your son wired error upward.  You're files showing error functions?

    What context are you running VI when you are within the project and what context from outside the project?

    My suspicion is that in one case, you run on your PC, the other on the cRIO.  Your file exists only on one device or the other.  And also that when you change your PC for the cRIO, your file path must change.  It's very strange that your watch VI access you the disk R:\.  I bet that the R:\ car n does not exist on your cRIO.

  • Reading a text file and it trace

    Hi friends,

    I have a file, the screen shot is attached to this letter, what I need is, I want to read this file and it draw in a chart

    (In the file between the two values, it is a specifier to tap)

    Give an example of labview for this program?

    Thank you

    Best regards

    Tom

    Thank you altenbach.

    Problem solved. Thanks again

    Kind regards

    Tom

  • I'm doing a script that takes a list of e-mail from a text file and then allow me to select a save as a string. I found some ways to get the path of the file, but I'm in check by pulling the list

    I found some ways to get the path of the file, but I am defeated by pulling the list from that. the function of the path get gives me the path as "Macintosh Users:: Documents: extractedb.txt (myUsername).

    What I can't understand is how to get a dialog box to display a list that represents the content in the text file, I need to change the contents of the text file, I need the box to show me what I chose and I want to save my selection as a single string.
    e '.

    example of extractedb.txt information:

    [email protected]

    [email protected]

    [email protected]

    * has a random number of emails as well *.

    I want this is to pull those emails from the text file and turn them into a list so I can get to be a selection in my dialog box.

    Any help would be great = D

    Assuming you have a text file with your example e-mail addresses, the following AppleScript will read this file in a list (mf_List) and then use this list as input to choose among the list. Because multiple selection is allowed (control button), the output is sent to a list (sel_addr). We check if the Cancel button was pressed by testing for false and if this condition is met, we the script error.  Based on a single or multiple list item content of the list, display accordingly.

    game of mf to ((path to the folder as text) & "mail_list.txt")

    the value mf_List to {}

    the value sel_addr to {}

    the value mf_List to paragraphs of (read file mf)

    the value sel_addr to (choose from the list mf_List with title ¬

    ('Mail list' with multiple selections allowed without empty selection allowed)

    If sel_addr is equal to false then

    Error number-128

    return

    end if

    If length of sel_addr is equal to 1 then

    sel_addr display dialog box as text

    on the other

    the value Point to the text of TID to AppleScript delimiters

    the value Point text in AppleScript return delimiters

    display the dialog box elements of sel_addr in the text

    the value Text of point AppleScript delimiters to TID

    end if

    return

  • Can I read text files in Multisim 11.0?

    I want to take data outside. So, read text file in Multisim 11.0? Or, can I import Chart 11.0 Multisim LabVIEW?

    Hello

    Here is a step by step tutorial:

    The use of LVM in Multisim

    There is something when you configure the file LVM in LabVIEW. In the window to write in the file of the measurement , value X column field, check that you select a column only. Multisim must have this explicit time column when you import data.

    If you still have problems to fix your VI, LVM file and the circuit.

    Kind regards

  • close the reference on "read text file" - Ref num vs prefer class conflicts

    Dear users,

    Vi Analyzer asks me to close the refernce created by VI "read text file". So, I would close a refnum created by primitive VI "read text file". I used a direct wire, wiring by top and bottom of the casting, but each of them attend class conflicts (see the screenshot below). It is even possible to correctly transform the refnum (byte stream type reference) to refer (reference VI generic) and remove the refnum?

    See you soon,.

    You must use the close file.

  • My Internet EXPLORER Favorites list include several photos, text files and downloaded web pages, of which none appear when I import my Internet EXPLORER Favorites list in Firefox. Is there a way I can remember those?

    My Internet EXPLORER Favorites list include several photos, text files and downloaded web pages, of which none appear when I import my Internet EXPLORER Favorites list in Firefox. Is there a way I can remember those?

    There is a work around:

    Export your IE Favorites to an HTML file, and then import it into Firefox. If you have questions more do not hesitate to ask.

  • How to convert a text file and give the table

    Hai

    How to convert a text file and give the data of the table

    ISN'T THERE!

    You must put this

    SET_BLOCK_PROPERTY ('TEST_MS', insert_allowed, property_false);
    SET_BLOCK_PROPERTY ('TEST_MS', update_allowed, property_false);

    just before the last exception...

    Published by: Dora on January 19, 2010 14:54

  • Problem reading text file

    CVI programmer for several years, but it has been awhile. Trying to read in a text file that displays fine in say Notepad. The first line of text in the file is:

    All temperatures in ° F.

    If I use the scan function, say:

    public static char cdum [2048];

    ScanFile (DataFile, "%s > %s", cdum); I get these results:

    cdum [0] is - 2

    cdum [1] is 65 (which is the ASCII character 'A')

    The rest of the cdum is all zeros.

    In a hex editor in decimal display grouped by bytes, the line is:

    0 255 254 65 0 108 0 108 0 32 0 116 0 101 0 109 0 112... as the display looks like

    ybA.l.l.. t.e.m.p.e.r.a.t.u.r.e.s.. i.n.. °. F....

    So I get the scan function is to see the start character, then by pulling the 65 and placing in the location cdum [1], then strikes the character 0 and leaves the function of scan as she found an end of line. Trying to read in the entire line and the subsequent data float line, but is not serious, I can understand that our after I get over the initial problem above.

    Can someone help me with this? I have no problem reading in ordinary text files, but this one is as it is grouped in words rather than in bytes. Have you tried a bunch of different Scan function modifiers source and target [xt0, w #, etc.], but nothing seems to work.

    Data file attached.

    Thank you-

    Scott

    Hello

    I downloaded your file, it is opened in Excel because of its extension and the settings on my computer. I then wanted to save it as a text file normal to see in Notepad and read with a simple C program. In doing so, Excel told me: some features in your workbook may be lost if you save it in Unicode text.

    This is consistent with your observation of 16-bit data.

    LabWindows/CVI, unfortunately, does not support the Unicode character set and functions of the library operated at only 8-bit characters.

    So I would say to convert your file to 8-bit characters; You can also support the pursuit of the Unicode support in CVI here

  • Read text problem and precision

    Hi all

    I have a problem in reading the text. I tried to open the file with "reading worksheet file. VI. I think that there is a problem in the format and precision. But I can't draw the graphs correctly. I have the text file that I have attached the first column is the x-axis and I love to draw the other 6 columns to that.

    Please help open this file so that I can see all the graphs.

    Thank you

    Bala

    The file looks like perfectly suited for "reading spreadsheet file. How you have configured this VI?

    Be sure to read data from precision DBL and use the TAB as the separator.

    Probably you need data transposed for the way you try to draw it?

    You can post your VI?

    EDIT: or the zeros at the end of the file are probably causing problems in your tracing code.

Maybe you are looking for

  • Firefox is not redirect when it gets an HTTP 302

    After completing a simple form on this page: https://bitdango.com/register/email The page should redirect to this page: https://bitdango.com/register/verify Instead, nothing happens. The browser is not simply redirect. I tried a relative and full URL

  • Facebook iPad app always "breaking lines" in return for News.

    I always get the two lines of teeth break up of my news feed. I try to "Refresh" over and over again but the lines remain {and between the lines are all day new messages.}. Every once and awhile, after an attempt to refresh over and over, Newsfeed wi

  • My contacts won't save

    Hello world My iPhone suddenly decided to 1) stop save contacts and 2) losing the details of the contacts that I have on the phone - some of which are there for years. Help! I'm worried about losing more, plus I have text messages that I now have to

  • iOS 9.2 cannot download the CNN app and voice recorder on iPhone 5 s

    I have a 5 iPhone with iOS 9.2 on it from now. Apple customer service had updated me to iOS to iOS 9.2 9.1 thought, it would solve this problem, but it didn't. I tried all day download the CNN app and voice recorder app on my phone. It will be partia

  • Change the keys F1 - F12 on Lenovo Ideapad U430

    I would use the standard F1 - F12 keys without having to hold the fn on my newly purchased Lenovo Ideapad U430. For example, in Excel, I wish I could go inside a cell by pressing right on F2. Instead, my computer makes me press Fn + F2 for this featu