ReadyNAS 104 to 314 #26833764

Hiya

I have a readynas 104 with 6 TB drives in there, I want to move to a readynas 314 to be able to use the maximum storage space

Can I just slide my readers of the 104 in the 314 and not lose my data?

Thank you

Looking at your case looks like has already set and the remains to have PHP installed at one time was the problem.

Tags: Netgear

Similar Questions

  • Server error ReadyNas 104 and plexmedia

    I recently bought this ReadyNas 104 and install the server software Plexmedia. It was working fine.

    Then I got new disks and decided to build a new system.

    When I looked at the app was now lack of Apps, I downloaded plexmediaserver-ros6-binary - annapurna_1.0.3.2461 - 35f0caa_armel.deb

    The following is the error I get when trying to run this application installed. Activation/deactivation of the service then nothing

    very weird but it worked before, any ideas.

    Sven has soon

    The RN104 is not a unit of Annapurna.

    The RN104 uses other armel package. It should have been clear when downloading from plex.tv/downloads

  • Monitoring of ReadyNAS on ReadyNAS 104

    IM using a ReadyNAS 104 and want to use to record the flow of our surveillance cameras. Unfortunately application of monitoring ReadyNAS does not supports more of a camera and recording on motion that makes it completely useless for my application. Is it possible to purchase a license to get a record on motion works on a series of 100 ReadyNAS or is it simply not supported?

    A little off topic, but I finally got the camera to record directly on a ReadyNAS share. All I had to do was setting a quota for such action and finally formatting worked. What the camera calls of formatting are actually create some files binary index and a bunch of zero-byte files hivXXXXX.mp4 which then slowly getting filled with video data.

  • How long does it take to extend a volume on a ReadyNAS 104

    Hello

    I have a ReadyNAS 104 that I had started to use with a single disc in it, a red WD 4 TB. However as it was close to capacity I had an another Red WD 4 TB to extend the volume on the.

    It took some time (about 12 hours) for the drive to become ready. To increase the volume and use the two discs, I understand that I had to reboot the ReadyNAS. So I did, but since the display said "restart now. See you soon. »

    Have been led to believe that this will take a while, if someone can give a sign of how long, because it's been 48 hours and I am concerened that something is wrong.

    Currently I'm unable to access the ReadyNAS on the network, obviously I guess as it is still starting, so unable to confirm indeed if he does something.

    Thank you

    It seems awfully long for me, and should be able to see RAIDar.

  • ReadyNAS 104 lock, caused by the option of bit rot?

    Hello

    I recently bought a ReadyNas 104, I updated the OS to 6.2.5 but I this gel NAS which often and the only way is to pull the power plug.

    After many trials, I think that I have a system stable but only because I have disabled "bit rot" options for all actions. I don't mind that little rot slows down the NAS, but I fear that the only way out is by pulling on the power cord because noting unresponsive.

    Thanks in advace.

    So far the days I have no blockages.

    The 2 things I did was to disable the "virus scanner" and disable all 'protection rot '.

  • ReadyNAS 104 does not start. Out_of_memory error 354. After the upgrade to 6.4.1 #26323717

    6.4.1 installed from 6.2.5 yesterday. Everything went well. Did all the "computation". has worked well.

    No not from one day to the next with 354 out_of_memory error. now, does not start.

    I tried reinstallOS. No luck.

    totally stuck and he needs for businesses!

    You could try RO mode, see https://community.netgear.com/t5/Using-your-ReadyNAS/Readynas-104-won-t-boot-Error-354-out-of-memory...

  • ReadyNAS 104 unable to boot after power failure

    Hello

    My Readynas 104 unit is in a suspended state. Power blue led continues to blink (for hours) when I restarted after a power failure. The disply screen says "READYNAS 6.4.0" and no button works. I can only remove the power cable and connect back to try again to start, but even once, he ends up in the same State of the Power LED flashes continuously.

    Device answering queries ping but actions / iSCSI and admin page not available.

    Someone of you has faced this kind of problem or can help me solve this problem without losing any data please?

    Thank you

    Hussain

    I want to contact support.

  • Different versions of ReadyCloud on ReadyNas 104 6.5.0

    I have two ReadyNAS 104
    Both recently upgraded to 6.5.0

    A while back I accidentally disabled ReadyCloud on the first and then added new - then after that was to connect to the admin Pages using the 'admin' instead of the main user account account. This works even when am so Ok with it.

    Since the upgrade to 6.5.0 - I need to use the account "admin" on both.

    Now, go to the 'Cloud' of these two tab - ReadyCloud option seems to be significantly different on both. Key settings also gived options.

    Not a big issue that I don't use much, but thought I would check why it is.

    Older machine (ReadyCloud disabled + add):

    Parameters:

    New box:

    Parameters:

    Thoughts?

    Clear the cache of your web browser, close your web browser and then reopen the web administration interface. The admin web UI should then display correctly with both systems.

  • Pass the disk from ReadyNAS 104 again ReadyNAS 104 #26210568

    I just got a replacement from the ReadyNAS 104 factory. I swapped the drives ensuring that I kept the disc # correct. However, when I start the new NAS he don't know the discs. I need to "turn up the volume. However, I fear that will erase the data. Any suggestions on what to do?

    Hello ckovel,

    When you insert the disc on another chassis that is with the same model, you must insert them all to their respective bays before initializing the NAS. NAS should display disks and volume load.

    If this is not the case, one possible reason is the chassis and the disks do not have the same version of firmware.

    You should still be able to get support for it since it is to install the replacement. It is best that you contact the helpdesk to guide you through it. Use the previous case, it can be reopened and increase if necessary.

    Kind regards

  • EA4500 not find Netgear ReadyNAS 104

    Just bought a Linksys EA4500-NP to replace my Linksys Wireless - G WRT54GL

    Have all the configurations works very well EXCEPT FOR Netgear ReadyNAS 104

    When I turn on the NAS I get boot error "unable to connect the server discovery.

    The WRT54GL assigned IP 192.168.1.10 to the NAS

    The assigned EA5400 IP 10.42.181.142
    Devices of will NOT handshake

    DOES ANYONE HAVE ANY SUGGESTIONS.

    All Linksys Tech Support says "call Netgear.

    Configuration of the network attached as photo

    jaholstein wrote:
    @chadster766: great response.

    then could I also change / force the //server be 192.168.1.10... just in case the other DHCP auto-assigns Protocol thing as 10 on the NAS? If so - would appreciate steps & screenshots. Use a DHCP reservation so the server always gets the same IP address of the DHCP server

    Oh and here I have the NAS or disable during the walk cycle for EA4500 then switch you mentioned earlier? On

    Comments above:

  • rebuilt drive ReadyNAS 104 replaced always display data degraded data

    Have a 104 - drive in slot 1 readynas failed-

    tested the new drive all tests

    replaced by model and brand

    It detects and rebuilt volume showing raid 1

    Once rebuilt still happens with degraded volume

    running latest firmware

    Have you tried restarting and once rebooted begins the rebuilding process again?

    Someone has any ideas

    Thank you

    Well I would like to back up the data to another drive if you can (do not try and replace the existing data).

    Then with only good new records in the NAS do a factory default (erases all the data, settings, everything) and restore your backup data.

  • ReadyNAS 104 - Drive replacement / addition of training

    BLUF: Bought 2 new red WD 3 TB disks (WD30EFRX) drives to add to my current 3 x 1 TB. What drive can I delete and in what order? Add to add and to remove the 4th and wait?

    To make the bottom at the front line should give you an idea of what im asking, I did some research on how to add or replace drives, but because I don't have that 3 disks in my 104 I just want to Im sure to do it correctly.

    I bought this ReadyNAS for redundancy of the data on my network (media etc.), so I use my old workstation leads in NAS (I know bad idea, but I have already built the table before the search).

    Here are the disks and their SMART specifications:

    Model family:     Western Digital Caviar Green
    
Phone model:     WDC WD10EADS-11M2B1
    
The data SMART attributes Structure revision number: 16
    
SMART vendor specific attributes with thresholds:
    
ID # ATTRIBUTE_NAME          FLAG     VALUE WORST BEAT GUY      UPDATE  WHEN_FAILED RAW_VALUE
    
  1 Raw_Read_Error_Rate     0x002f   200   170   051    fail pre  always       -       0
    
  3 Spin_Up_Time            0 x 0027   124   107   021    fail pre  always       -       6800
    
  4 Start_Stop_Count        0 x 0032   055   055   000    Old_age   always       -       45074
    
  5 Reallocated_Sector_Ct   0 x 0033   200   200   140    fail pre  always       -       0
    
  7 Seek_Error_Rate         0x002e   100   253   000    Old_age   always       -       0
    
  9 Power_On_Hours          0 x 0032   052   052   000    Old_age   always       -       35631
    
 10 Spin_Retry_Count        0 x 0032   100   100   000    Old_age   always       -       0
    
 11 Calibration_Retry_Count 0 x 0032   100   100   000    Old_age   always       -       0
    
 12 Power_Cycle_Count       0 x 0032   100   100   000    Old_age   always       -       517
    
192 power-Off_Retract_Count 0 x 0032   200   200   000    Old_age   always       -       229
    
193 Load_Cycle_Count        0 x 0032   180   180   000    Old_age   always       -       61742
    
Temperature_Celsius 194     0x0022   104   089   000    Old_age   always       -       43
    
196 Reallocated_Event_Count 0 x 0032   200   200   000    Old_age   always       -       0
    
197 Current_Pending_Sector  0 x 0032   200   200   000    Old_age   always       -       0
    
198 Offline_Uncorrectable   0 x 0030   200   200   000    Old_age   offline      -       0
    
UDMA_CRC_Error_Count 199    0 x 0032   200   200   000    Old_age   always       -       0
    
200 Multi_Zone_Error_Rate   0 x 0008   200   200   000    Old_age   offline      -       0
    Model family:     Western Digital Caviar Green (AF)
    
Phone model:     WDC WD10EARS-00Y5B1
    
ID # ATTRIBUTE_NAME          FLAG     VALUE WORST BEAT GUY      UPDATE  WHEN_FAILED RAW_VALUE
    
  1 Raw_Read_Error_Rate     0x002f   200   200   051    fail pre  always       -       0
    
  3 Spin_Up_Time            0 x 0027   191   185   021    fail pre  always       -       6441
    
  4 Start_Stop_Count        0 x 0032   094   094   000    Old_age   always       -       6277
    
  5 Reallocated_Sector_Ct   0 x 0033   200   200   140    fail pre  always       -       0
    
  7 Seek_Error_Rate         0x002e   100   253   000    Old_age   always       -       0
    
  9 Power_On_Hours          0 x 0032   062   062   000    Old_age   always       -       28299
    
 10 Spin_Retry_Count        0 x 0032   100   100   000    Old_age   always       -       0
    
 11 Calibration_Retry_Count 0 x 0032   100   100   000    Old_age   always       -       0
    
 12 Power_Cycle_Count       0 x 0032   100   100   000    Old_age   always       -       514
    
192 power-Off_Retract_Count 0 x 0032   200   200   000    Old_age   always       -       351
    
193 Load_Cycle_Count        0 x 0032   038   038   000    Old_age   still       -       487882
    
Temperature_Celsius 194     0x0022   101   098   000    Old_age   always       -       46
    
196 Reallocated_Event_Count 0 x 0032   200   200   000    Old_age   always       -       0
    
197 Current_Pending_Sector  0 x 0032   200   200   000    Old_age   always       -       0
    
198 Offline_Uncorrectable   0 x 0030   200   200   000    Old_age   offline      -       0
    
UDMA_CRC_Error_Count 199    0 x 0032   200   200   000    Old_age   always       -       0
    
200 Multi_Zone_Error_Rate   0 x 0008   200   200   000    Old_age   offline      -       0
    Model family:     Western Digital Black
    
Phone model:     WDC WD1002FAEX-00Y9A0

    ID # ATTRIBUTE_NAME FLAG VALUE WORST BEAT TYPE UPDATED WHEN_FAILED RAW_VALUE
    1 Raw_Read_Error_Rate 200 200 051 fail pre 0x002f always - 21
    3 Spin_Up_Time 0 x 0027 174 171 021 fail pre-4291
    4 Start_Stop_Count 0 0032 100 100 000 Old_age always - x 991
    5 Reallocated_Sector_Ct 0 x 0033 200 200 140 front fail not always - 0
    7 Seek_Error_Rate 0x002e 100 253 000 Old_age always - 0
    9 Power_On_Hours 0 x 0032 065 064 000 Old_age always - 26270
    Spin_Retry_Count 10 0 x 0032 100 100 000 Old_age always - 0
    11 Calibration_Retry_Count 0 x 0032 100 100 000 Old_age always - 0
    12 Power_Cycle_Count 0 x 0032 100 100 000 Old_age always - 507
    192 power-Off_Retract_Count 0032 200 200 000 Old_age always - 0 x 240
    193 Load_Cycle_Count 0 x 0032 200 200 000 Old_age always - 750
    194 Temperature_Celsius 0 x 0022 101 092 000 Old_age always - 46
    196 Reallocated_Event_Count 0 x 0032 200 200 000 Old_age always - 0
    197 Current_Pending_Sector 0 x 0032 200 200 000 Old_age always - 0
    198 Offline_Uncorrectable 0 x 0030 200 200 000 Old_age offline - 0
    199 UDMA_CRC_Error_Count 0 x 0032 200 200 000 Old_age always - 0
    Multi_Zone_Error_Rate 200 0 x 0008 200 200 000 Old_age offline - 0
    Using the drive
    

    File system      1 K-blocks      used available use % mounted on
    
/ dev/md127     1943821568 997890704 944950192  52% / data

    So as you can see I have two green and a WD black drives, trying to decide if its more risky to keep black their or pull on black.

    Let me know team!

    I appreciate the support.

    ShoGinn wrote:

    Now should what player I remove my pool?

    None of the drives having errors, remove the cartridge with the number of very high charge cycle (which is the WD10EARS).

  • ReadyNas 104 web inaccessible gui

    So today I wanted to connect on my ReadyNAS however windows was invited me for a user name when trying to access actions to explore what was new and since I tried to enter the password twice without success I wanted to connect the Web gui to check what was going on.

    However the web gui is not available (page does not load as if the service is not running). I change not all apps on the last time I got it online (I usually do not install anything because I just use it as a storage/backup). I tried to reset the Firmware in the start menu, without great success except that now, even the windows sharing appears no more.

    The NAS is started perfectly, saying: it is enough space availabe and it also gets an IP address from my router. Unfortunately I had disabled SSH and also after reset it the firmware's default deativated for sure.

    I have several terabytes of data on these discs, which I just can't afford to lose just because of a software hiccup. Is there an easy way to solve this problem by reinstalling a newer OS or something?

    Kind regards

    Reverse your two SMB changes with

    SC.exe config lanmanworkstation depend = bowser/mrxsmb10/mrxsmb20/ins
    SC.exe config mrxsmb20 start = auto

    These changes should not have had any effect on access by web browser anyway, because the browser is not via SMB.

    As before, you need to run CMD as administrator, and then restart when you are finished.

    You have running on the PC internet security software?

  • 6.2.5 ReadyNAS 104 firmware update is not displayed for ethernet network adapters > links

    I recently updated my ReadyNAS to 6.2.5 firmware 1.04 and the network > links page does not appear any ethernet cards. I recycled the box several times but still no information of the card. Because I can navigate to the page to admin (via IP address), the network works. However, it does not appear in the DNS so I would check the configuration but impossible because no card shows eth. Any ideas on how to solve this problem?

    I finally solve this by manually installing the 6.2.5 new update. Seemed to have solved any problem occurred during automatic update.

  • Need help to save a used readynas 104

    As the title suggests I recently bought this Nas in a COMPUTER store in my area that has been close, but when I try to register was already registered by the former owner.

    Am I totally fucked up here without another option or is there a way to do this? I hate call centers and their useless reading of a script routine and no e-mail account is for support.

    caramoon wrote:

    As the title suggests I recently bought this Nas in a COMPUTER store in my area that has been close, but when I try to register was already registered by the former owner.


    Unfortunately, you cannot save a ReadyNAS to opportunity. There is no guarantee, and Netgear provide any support paid either.

Maybe you are looking for

  • Universal Crossword print yesterdays puzzle. How to print today "s".

    print the puzzle from yesterday

  • FindPattern and 64-bit

    HM, as nobody answers my questions from 32 to 64-bit, I'll keep wondering: Function FindPattern does not seem appropriate for 64 bit, because the starting index continues to expect a regular 'int '. 'Number of bytes' is defined as ssize_t, but this s

  • I can not load of Norton 360.

    I tried to load Norton 360 on my windows XP computer, nothing helps.  Before checking, I used the Task Manager to check the CPU and you see it turn around 7%.  When I try to load 360. It climbs to 100%, and the program does not load.  I tried a full

  • My laptop turns on, but screen remains black.

    My laptop turns on, but screen remains black.  Then it turns off by its self. Please tell me how can I fix?

  • EliteBook2540p: base system device

    I want an installation of this driver that I can't know, and it's the hardware ID PCI VEN_1180 & DEV_0843 & SUBSYS_7008103C & REV_14PCI VEN_1180 & DEV_0843 & SUBSYS_7008103CPCI VEN_1180 & DEV_0843 & CC_088000PCI VEN_1180 & DEV_0843 & CC_0880 Thank yo