ReadyNAS disrupts TV?

Similar Questions

• After update to Sierra, Mac does not connect to the ReadyNAS device

  I have two Macs at home - an iMac and a MacBook Pro.  I also have a ReadyNAS device, which acts as a time for both Machine.

  I've updated the iMac to macOS Sierra.  The upgrade went smoothly, no error reported.  However, once it was up, I found that the iMac has questions is authenticating with the ReadyNAS via AFP (and / or he would authenticate, then delete the connection) and also not able to connect to the service of Time Machine on the ReadyNAS device.

  To be sure it wasn't the ReadyNAS, I went to my MBP - it still works under OS X 10.11 and shows all the problems.  AFP shares are accessible without problem, and Time Machine works as expected.

  Has nothing changed with Time Machine or AFP protocols under macOS Sierra, which could cause this?

  The ReadyNAS is a ReadyNAS Pro 4, running 4.2.28. firmware, if it is useful.

  Thank you very much for your help!

  AFP is not used by Sierra. Try using SMB instead, if your NAS supports. Or contact the technical support of the manufacturer for assistance.

• Disruption of the page

  Disruption of the page
  I see a cluttered pages.
  I disabled the plugin and the extetion, but my problem is not solved.
  http://picpaste.com/11-01-2013_09-07-48___-__-3TYSaaI1.PNG
  (I am currently using the new private window that does not have this problem)

  Hello

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• iCloud disrupts the Internet connection

  I had a lot of power outages Internet randomly and finally isolated the problem to my backups iCloud iOS devices and/or iCloud photo library will be mailed.

  (3 iPhones and iPads 4) devices are connected to a wireless router (currently a Netgear WNDR4300v2) and work perfectly well throughout the day. Only when I plug in a device to load the fact so disrupt the router's Internet connection. As expected, the devices to begin with iCloud download when they are connected to the load.

  I tried 3 different routers and you experience this problem on all of them. As soon as the device (iPhone or iPad) tries to download to iCloud, the Internet stops almost completely. I can ping from a laptop ethernet-cable-connected, but it is extremely slow and cut in half the packages. I can still connect wirelessly to the router and to interact with its administration interface, but the connection Internet is basically dead until I have unplug the iDevice download from the network or unplug it (which disables the backup iCloud).

  An iPhone 6 especially cause the majority of the question because I take a lot of pictures with her (she also monthly extra storage iCloud add-on). Other devices have also caused disturbances, but those who don't last as long. I tried to set many different parameters and frequencies on my routers, but nothing is done even a little.

  Is this the iPhone 6 with lots of photos have also OPTIMIZED enabled?

  It's a lot of traffic from router. If you optimize the phone and iCloud communicate constantly that the phone downloads new photos and iCloud analysis local storage of the phone, sending new files optimized down to the phone based on the amount of space on the phone. It can choke the warmest router.

  Then add the traffic from day to day and other devices...

• Satellite Pro L500-1 t 5 BlueScreens and visualize disruptions

  A few days ago my laptop crashed when I he began and showed a blue screen with the code:

  0 x 0000116 (0xFFFFFA8007AF8010, 0xFFFFF88004AC3D9C, 0x0, 0,)
  0 x 0... (02) atikmdag.sys address FFFF88004AC3D9C base at FFFF88004AB1000

  After that, it was impossible to boot the operating system (Windows 7) regularly.
  The PC is very slow and had a lot of disruption in the display (some columns with horizontal stripes across the screen). Start the computer in safe mode was possible, but the disruption was still there.

  My first idea was to uninstall the graphics card (ATI Radeon 4650 Mobility) and it worked.
  I could start my OS normally.

  But the laptop kept crashing in a BSOD after a few hours.
  The report after it was:

  BlueScreen
  6.1.7601.2.1.0.768.3 OS version
  ID: 1031
  BCCode 116
  BCP1: FFFFFA800580A010 (in an accident later it was FFFFFA80040BB010)
  BCP2: FFFFF88004A2F7F8 (later FFFFF88004AA07F8)
  BCP3: 0... 0
  BCP4: 0... 02
  6_1_7601 OS version
  Service Pack 1_0
  Product 768_1
  Data to descripe the problem:
  C:\Windows\Minidump\010314-23602-01.dmp (bzw. 010314-22791 - 01.dmp
  C:\Users\Myame\AppData\Local\Temp\WER-79388-0.SysData.XML

  I sent it using Toshiba, January 3, but I did not answer until now. So I hope that someone here could help me.

  I tried many things (drivers update, windows update, tests of software malware and many more), but nothing really continuous working. Sometimes the disturbance disappeared for a few hours just return again. When I started a game, the laptop crashed immediately. So I suspected a lack of memory.

  I did a witch proven my computers memory memtest work perfectly and during a hardware test my hard drive seemed to work too - but I'm no expert in this. When I did a full test material (with a trial version of EVEREST) the tool always crushing when the test reaches OpenGL. I disabled my video card and the test passed. After that I could use my laptop regularly... but without a video card.

  Yesterday, everything has worked perfectly - there was no accident and no disturbance of the display. When I tried to stop the computer, I noticed, that windows wanted to install a new update for ATI Radeon Mobility 4650 (which was in fact very old). It happened several times in the last days and never did something good.

  And of course it would reactivate the dev video. So I tried to prevent it to disable the updates.
  But it does not work. Installed the WIndows update and it came to pass that he should be: that day crashed my computer, when I started it and since this time, the disruption of the display again. And this time it seems to stay... disabling the card does not help this time.

  I don't know what else to do. Does anyone have an idea?
  I suspect a problem with the drivers. But I can't install the drivers with the official Catalyst software.
  I have my Toshiba laptop for summer 2010 and never had any problems like that.

  0 x 0000116 > (0xFFFFFA8007AF8010, 0xFFFFF88004AC3D9C, 0 x 0... 0, 0 x 0... 02) atikmdag.sys address FFFF88004AC3D9C base at FFFF88004AB1000

  From my point of few graphics card is the troublemaker.
  The atikmdag.sys file that occurs in the BSOD message, belongs to the ATI driver.
  I don t think that the graphics card driver might cause this problem. If GPU driver problem, new installation or update should fix the problems. But it seems that helps too.

  This is why I think the GPU chip is malfunctioning.

  By the way: you should not send an email to Toshiba, but contact the Toshiba authorized Service Provider (ASP) in your country. Service guys are usually the first point of contact in the event of hardware problems.

• Qosmio F10 - a few disruptions, watch television in the Media Center & Qosmio player

  Hello

  I have a Qosmio F10.
  The motherboard died and was replaced by Toshiba with a new saw 915 chips.
  I was watching TV in media library and Qosmio player with no problems.

  But recently, I noticed that after playing for awhile, the TV has a few disruptions.
  The video is not yet clear, but the screen has vibrations (for lack of a better word).

  It's like when you watch TV on low voltage. I thought that it may be due to dump excess files and temporary files. So I deleted them.
  It seems to work very well so far, but I wonder if it's because of the RAM.
  His only 512 MB. Should I update? If yes then how much.

  Thank you.

  If the manual says this, then it could be possible that this is the cause
  Sorry, but you can find using only the notebook with the settings and accurate portrait of Toshiba.

• ReadyDATA of ReadyNAS data import

  We are trying to deploy a ReadyDATA 5200 and refocus our ReadyNAS 4200. Is there a quick way to transfer data or actions of a ReadyNAS to the ReadyDATA. I looked at the link of imports by volume, but this seems to be only for import data from the seed.

  Yes, the import function is just to import seeds for ReadyDATA jobs repeated data.

  I recommend you create the necessary actions on the ReadyDATA. Enable SMB or NFS on the shares.

  Then create on the ReadyNAS backup jobs using the ReadyNAS built-in Backup Manager. Create a job for each action and push data across the ReadyDATA by using SMB or NFS.

• Incomplete backups after the recent firmware update (ReadyNas NV +) 4.1.15

  Hi, I had the system work perfectly without any problems until he informed me of the 4.1.15 updated. I went ahead with the update and now the backups are incomplete. It stops around folders starting with Mr. to make things worse, backups are reported as successful. I checked the old backups and they do not have a problem. Is it possible for me to go back to the old firmware update? I'm not sure than I had before but and I don't know how to find out who. Model: ReadyNAS NV + [X-RAID] Serial: 23J5127N0033D Firmware: RAIDiator 4.1.15 [1.00a043]

  Should he behave differently if you select Remote: Windows/NAS (Timestamp) ?

• ReadyNAS NV + V1 Frontview page broken (again) :-(

  https://community.NETGEAR.com/T5/using-your-ReadyNAS/ReadyNas-NV-v1-FrontView-page-broken/m-p/945237

  It happened again, I tried to download the logs and frontview page became corrupted, as SIN by answering the ping requests and is displayed in raidar but I can't connect to it

  Tried PuTTY it but the connection is refused

  MDGM maybe you can save me again?

  TIA

  Solved

  make OS reinstall

  seems to work

• ReadyNAS 2100 does not start

  Hello, I am experiencing problem with ReadyNAS 2100

  I made an update of the operating system to last my 2100 has frozen after startup

  I tried to reboot several times

  I tried the upday firmwear, os reinstall etc it won't go past the menu option

  IE if I reinstall bhouse firmwear the or os will be just Frezza and not go any further

  I know that the drives are ok it's just softwear problems I need urgent help much thank s

  Ty for your help I got unit replaced per person that I brought but now have another more urgent problem in another message in the end

• Replicate Readynas does not - code output: 12 (error in the protocol stream)

  Hello, I hope someone can help,

  Having a problem with a 212 and repeated.

  I get the below error

  Files size: 312,82 GB

  Total of files transferred from size: 0 B

  Average speed: 0 B/s

  Exit code: 12 (error in the protocol stream)

  It worked until 6.5.2 update and I have restarted both readynas since then and still today.

  Anyone know what is happening?

  Thank you for your answer, you're the only guy who answers on here haha!

  We have 8 different jobs repeated or main nas and 6 of them work and 2 did not, after changing the routes over which the readynas uses to go to the internet, they are all seem to be working now, very strange as the other 6 worked a treat.

  You can mark it as fixed, will update all the nas with the last update this week.

• Server error ReadyNas 104 and plexmedia

  I recently bought this ReadyNas 104 and install the server software Plexmedia. It was working fine.

  Then I got new disks and decided to build a new system.

  When I looked at the app was now lack of Apps, I downloaded plexmediaserver-ros6-binary - annapurna_1.0.3.2461 - 35f0caa_armel.deb

  The following is the error I get when trying to run this application installed. Activation/deactivation of the service then nothing

  very weird but it worked before, any ideas.

  Sven has soon

  The RN104 is not a unit of Annapurna.

  The RN104 uses other armel package. It should have been clear when downloading from plex.tv/downloads

• ReadyNAS online (disconnected VPN)

  ReadyNAS Remote app only works in LAN, when I log off VPN site located in the SIN, and then disconnects. Can someone help me, THANKS

  It never works for you with remote connection? Or it has stopped working recently?

  Have you tried to unsubscribe and save it with your ReadyNAS Remote account, to see if it helps to put online?

  Thank you.

• ReadyNas remote control device

  Hello

  I don't see any device on readynas remote (on readCloud Agent (PC)).

  My connection is correct.

  If I use Readycloud on the web I see my 2 NAS (after click on Find button)

  On the Readynas Replicate web site, I see my 2 NAS

  ReadyNas 212 V 6.6.0.

  6300 port is not enabled on NAS

  Thank you

  I contacted support.

  READYNAS REMOTE is no longer compatible with OS 6.6.0. (or 6.5?)
  I use the READYCLOUD client

  Good bye

• ReadyNas 314, impossible to access via Windows Explorer

  Have spend the last 3 hours trying to find a solution on other posts, but nothing helps.

  Novice at most, so when you can, please explain as I am 5.

  I have a new 4-Bay ReadyNAS and installed 4 new 4 TB drives. Currently connected to the router by ethernet.

  I use a Plex server on my PC. I store all my media on an external drive. I moved all my multimedia elements from the outside to the NAS.

  However, the last step is to map the NAS server to the letter of the drive that was older externally. For the life of me, I can't do it. I connected the NAS to your PC via ethernet, but when I try and click on the NAS, it says that it cannot access. I tried to do a variety of solutions, but none have worked so far. Quite possible I'm not on the right, and it's a simple solution.

  Please let me know what you all need additional details. I am really puzzled.

  Finally found the solution. I had to go to my Windows credentials manager and add my NAS server out there. Thank you!