ReadyNAS NV Factory Reset cannot connect Admin Page

Similar Questions

• Cannot access Admin page, nor showing in Explorer after update to Firmware #26923836

  Hi, I just upgraded to 6.4.2 to 6.5.0

  Before I reboot:

  Cannot access admin page, became a loading bar with the NetGear logo, to receive a connection error message.

  I could see my SIN in Solution Explorer and browse the files.

  I rebooted and now it is happening:

  I get the connection error when tring to access the admin page. -Failure error as if he had nothing to this address. Same thing when I use the IP address.

  I ping the Ip and get an immediate response.

  I found some indications that I should be able to connect in SSH with putty, but it does not work for me.

  The LCD display indicating the right host name and version. I also got a message for the encryption to the startup key.

  Don't know what I can do at this point...

  We have tried to reinstall OS and nothing has changed.

  We have tried to unplug an ethernet, nothing has changed.

  The question has been reassigned to lvl 3. They came into tech mode.

  They discover that one of my 2 hard drives is a not synchronize properly and some corrupted system files. Simply, I removed the HDD and restarted normally. Everything was fine.

  I put the HARD drive bad and resynchronization.

  hope this helps someone else.

  PS, The Netgear Customer Service is good and fast - recommended!

• K1: apps are forced to close + cannot connect to the internet + factory reset cannot

  All of a sudden, my ideapad K1 keep poping up of messages saying that * stopped unexpectedly and force close.

  I try to upgrade the fireware all realize there is no wifi to connect (wifi works well on my other devices).

  After trying tons of method, up to call the customer service that seems to care about nothing and just ask me to do a factory reset. I finally decieded to make the patch more stupid - factory reset while it is said that 'com.android.setting' stopped unexpectedly and leaves.

  I'm trying to remove the application one by one and after reboot, all applications are still there.

  So, basically, I can't do nothing changes.

  Anyone has an idea how to solve the problem or how to do a hard factory reset? Thanks in advance.

  BTW: why my Panel for this community is in Spanish even if I put it in English?

  I know, I tried a thousand times. When I click on privacy, an error occurs and closes.

• RAIDr found ReadyNAS after factory reset

  Hello

  I have a ReadyNAS Ultra 2 with 2 x 2 TB disks inside.

  I needed to start from scratch, so I went to the factory reset my ReadyNAS using the start menu (press and hold the reset, press power etc), and RAIDr finds my ReadyNAS first so that I can click on Setup and choose a RAID type.

  I then click OK and it starts to do its thing.

  RAIDr then cannot find the ReadyNAS on the network.

  I thought it may come and go during the installation but I left for almost two days and RAIDr can't seem to pick it up on my network.

  It has an IP address, which I got from my routers connected devices page, and I can ping but RAIDr does not pick up it and navigate to the admin page fails.

  I have tried the factory reset (the two XRAID & clear) & reinstall OS, but still, it seems to me to run things but disappears forever more.

  Has anyone else had this problem, any suggestions on how to fix?

  Thank you

  I have sent you a PM.

• Factory reset cannot

  I have a slatebook Jelly bean 4.3 android running. I forgot the password lock screen, I should be able to correct by a factory reset power off. Holding the power and volume buttons as shown, but nothing happens. Any ideas?

  Hello @Chewwy,
  
  I suggest to do the following:
  
  Whereas Slatebook is turned off
  -Press and hold the down volume, low volume button is held, press the power button.
  -Keep the low volume button waiting until recovery menu appears.
  
  I hope this helps!
  
  -zzxeN

• Cannot access admin page

  Hello

  I have a unit of the RN102 running v6.2.5 firmware. The problem I have is that after a day or so of the unit in place, I'm more able to access the admin page - it just expires. Everything else still works well, I can still access the Web user interface for other applications on the device (for example. BitTorrent Sync, Plex) then the device has completely locked up to drop off the network.

  By turning the NAS and the new solves the problem for another day or two, and then I lose access to the admin again page. In addition, he shut down using the power button on the front of the unit does not work, I have to pull the power cord to get it to turn off.

  Anyone have any suggestions for how to fix this?

  Thank you

  Sounds like Plex used too much memory and the system has met a low-memory condition.

  You might try rebooting the NAS. Then you should find access to the administration web page.

  The 100 series is storage economic and designed to work both in a limited quantity.

  If you do not use an application for example Transmission then I would turn off.

  There is a newer build ARM of Plex 6.x to plex.tv/downloads that I guess you can try if you want.

• After factory reset, cannot download KB2868116

  Hi, on a factory reset on my lap top and after taking advice on this forum "CT", I was able to download all windows 7's updates except for KB 2868116. It show the error 800b0100 code. Can anyone tell how to solve this problem.

  Hello

  To help you in your query, you can check the following:

  • Open the Windows Update Troubleshooter
  • Article on error 0x800B0100 when updates installed by Windows Update or Microsoft Update.
  • SFC scanner. Analysis (sfc) System File Checker will Windows replace corrupted or missing system files on your computer.

  Scan SFC enforcement procedure:

  1. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. Click on continue or provide administrator credentials if prompted.
  3. In the command prompt window, type the following sfc/scannow and press ENTER:

  Refer to this article for more information.

  Let us know how it goes.

  Thank you.

• Cannot connect Admin Apex

  Hello
  
  I am trying to install the apex 3.2.1 on 11 g.
  As part of the configuration of the HTTP server, installed OHS 10.1.3.
  
  After completing all the pdf post installation steps, apex / http://hostnale:8080 / apex_admin
  the page doesn't load does not images and control will also, after providing the password and admin user name, no the case.
  Do not open the admin page and no errors in the http log.
  
  What is the problem? I missed something?
  
  After the pdf, run the script @apex_epg_config /apex.
  /Apex is my home directory where my express application software was unzipped.
  Then he did EDIT USER ANONYMOUS ACCOUNT UNLOCK;
  
  
  Thank you
  Kouadio

  Kouadio,

  New: you mix EGP and HTTP server. You must decide which one (only one!) you want to use.

  If you opt for the EPG, you don't need an Oracle HTTP Server. ->, Follow the Instructions of Installation EPG (or XE, it's the same thing).

  In the EPG, files are not stored in the file system, they are stored within the XDB.

  Maybe this Post helps a little: http://daust.blogspot.com/2006/03/where-are-images-of-application.html

  Peter

• 5 ESXi VMware vSphere Client need to password reset cannot connect to all the

  Have a question about the use of vSphere VMware esxi 5 Client.The root user has been disabled while we could use another name for root. Is there a way to reset this password to users so that we can open a session.

  When reinstall there is the possibility of preserving VMFS store.

  You must make sure you choose which

• Cannot connect to Admin page

  Hi guys,.

  After a power failure, the virtual environment is down.

  At reboot, vCOPs service returned to Foundation mode even if it is allowed with a key Advanced Suite.

  
  

  I tried to re-register vCOPs with the vCenter server but cannot connect more to the page/admin.

  By clicking on Login button that it remains a "check login information." literally 5 minutes then fails with a "General error has occurred."

  I checked the disk space on/data on both virtual machines and it is less than 10% used so it is not a question of space and so I did not add a new measure/data disc (see KB 2016022).

  I've done the usual audits of common sense but no luck...

  I need your help guys

  THX,

  Didier

  Hello

  I got the same question but used 2013358 KB to fix.

  I ran the script resetadminpwd.sh that came out with the error: "the password was not correctly reset" because of the command of psql not found... but it worked on the UI VM.

  Note that I used the same password that previously set, which violates the new requirements of the SP2 SLES-password only my root password was to be performed.

• Cannot access admin (ReadyNAS 102) Panel

  After turn on my NAS gets 192.168.2.25 IP address, I can ping from my PC. Power led blinks constantly after power to the top, I can't disable it only by unpluging power cord. I can't access Admin Panel by browser (connection refused) in Chrome and IE. I tried the procedure of resetting factory and OS reinstall that brings no improvement. RAIDar software is the realization that one SIN, but the firmware version is empty, so I guess there's the problem. Is there a way I can download the firmware - for example from USB when I have no access to admin panel? I am very disappointed because this is the State of the new product and my business really needs it goes fast...

  Hello CPR,

  Welcome to the community!

  The operating system and data are saved on the disc that is inserted in the ReadyNAS chassis. Without the records, there is no, you will not be able to access the admin page. SSH is also disabled by default, so if you want to access via SSH, you must Access the first admin page and then allow it to from there. Telnet access is designed for engineering and support of L3.

  Kind regards

• Cannot access the local admin page after first start

  Hello

  I am not able to access my newly purchased RN202, SN 45Y2535W003FC. I just plugged the power cable and turned on, but the power light keeps blinking even after hours. The NAS will connect to my local network with the ip 192.168.178.32 and ends by RAIDar under this address. However, the local admin under https://192.168.178.32/admin and https://192.168.178.32 page (even with http://) is not accessible. The connection is not accepted (cannot be connect-page in the browser). Also access more ReadyCLOUD is not possible, because the NAS cannot be discovered. Currently, there are no hard drives in the NAS. I also tried to insert a HARD disk already formatted in combination with a factory reset, but it does not work with the same result. It's already a replacement unit by my retailer the first device showing the same behavior, so I excluded a technical defect. What I am doing wrong? Any help would be greatly appreciated.

  Best regards

  Patrick Schmidt

  OK I found the solution by myself. Without a HARD disc inserted the NAS will not start correctly. As mentioned, I already tried to insert a HARD drive and then do a factory reset. Now, I saw that I have is to not properly place the HARD disk. If you open the lock on the grid (the thing in which you put the HARD drive), then you can not insert in the case completely and do not connect the connector of power und data. Maybe a little more detailed manual on it (for Dummies like me) would be useful. Argh...

• iPod touch will not got to some Web sites - "Safari cannot open the page because the network connection has been lost."

  Safari refuses to go to certain websites (facebook.com, youtube.com) on my iPod Touch and instead displays this error:

  S afari cannot open the page because the network connection has been lost.

  The bubble at the top where I typed in the URL doesn't change, it always says "facebook.com" or something else.

  No matter where I am, so it won't get fixed by resetting my home Wi - Fi router. Other sites load fine. I have reset the iPod, too, by pressing the sleep button and one on the front (whatever it's called) until I see the apple logo. I also did 'Story clear and data Web site' in the Safari settings.

  I searched the web and found a number of threads that start with similar complaints, but I can't find one where the problem has been resolved in fact.

  Thank you!

  Not "no matter where I am," means, it happens with all networks?

  If so:

  Try:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  -Restore factory settings/new iOS device.

  If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

• LAPN600 could ' t connect to the admin page

  Hello.

  The first time that I also tried to connect to the admin page it worked. But now when I try to connect if I'm lucky, I can log in, but after that I just got "page cannot be displayed".

  I HAV tried to reset the LAPN600 but it dosent resolves the problem.

  Someone at - it more then me that have this problem?

  I found the problem. It was me

  When I tried whit my windows 7 computer was wired and my Windows 8.1 was wireless.

  I found a setting "Access of Configuration management->" Wireless: activate

  So my problem is solved.

• Factory reset wireless router connection problems?

  Hello

  I recently did a factory reset on my HP6745f desktop running Win7 sp1 and I don't know if my problem is with HP or Linksys/Cisco (my router). I already contacted the support Cisco who reported the problem seems to be "a matter of HP, a corrupt driver or other third-party issue" and then offered to help, for a price. I'm hoping to avoid that if possible.

  This office computer is directly connected to the router via an Ethernet cable. Cisco software was that I want to install that 'control' of my router (called Cisco Connect) and when I try to install the software, I get a message saying: "We could not find your router" (that's why the software will not install) - although I am accessing internet through that router. Even if I try to enter my network name and the password, it cannot find anything. I am also unable to access the router via my browser "168.198.1.1".

  I am unable to connect wireless with the same desktop so, my 2 wireless laptops have no problem of connection at all, which leads me to believe it's something specific to my desktop pc.

  The Cisco Connect software has already been installed on my desktop and it worked fine. I guess my question is: someone has any suggestions for me? This could be a driver problem? How can I identify what (s) for 'check '?

  Any help would be greatly appreciated.

  I thought about it! My router can use a "network key" to connect other computers to the router. I guess when I reset my pc all this info has been removed and the router could not communicate.

  I have just created a network key on a flashdrive USB of my laptop, plugged the USB in my office and hop, I reconnected properly. Thanks for the suggestions, I really appreciate the help.