ReadyNAS OS 6.6.0 - T117 error in services settings


Advertisement

Hello

Services settings now works correctly.
Solved with the new OS 6.6.0 - RC1 and a few minor updates to MS Windows 10, don't know who did.

Concerning
Ulf

Tags: Netgear

Similar Questions

  • Canon 70 D my internal flash does not fire. It is broken or do I have an error in the settings.

    My Canon 70 D internal flash does not fire. I'm not sure if I made a mistake in my settings.  I usually shoot with a distance of exile 580 flash on the slave. The custom internal flash now or trigger a pre-Flash. So I think that it's broken by need help to rule out any possible error in the settings... Thank you

    CCTeen wrote:
    All these answers are in the correct sessions. If the "bulb" can break on the flash?

    Yes, certainly.

    High value Multi Shot Noise reduction option ISO NR will also disable flash, however.  To check this option too.

    If in doubt, perform a reset to the default values.  Now I'm really out clues .  You will need to send it.

  • "Why what I get"Error contact Service"Please try again later.

    Original title: Windows Media Player.

    "Why what I get"Error contact Service"Please try again later.

    Hello

    Welcome to the community forums of Microsoft and thanks for posting the question. Please answer a few questions to refine the question.

    1. Once you get this error message?

    2. are you aware of changes to the computer before the show?

    3. What is the full error message?

    4. what version of Windows Media Player installed on the computer?

    "Your question contains all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help. »

    See this link for more information on:

    http://support.Microsoft.com/kb/555375

    Please answer the questions so that we can help you solve the problem that you are facing on the computer.

  • laptop does not recognize the phone samsung S3 31 error: the Service starts

    Original title: error 31: Service starts
    I'm trying to get my laptop to recognize my phone of samsung S3.  I downloaded ' Microsoft_User-Mode_Driver_Framework_Install - v1.0 - WinXP.exe'... this driver is needed to get my laptop to recognize my phone. but, the service of this driver does not start... How can I get this service to start?

    Hello

    If resetting the phone does not help then you can contact samsung support.
    http://www.Samsung.com/SG/support/main/supportMain.do

  • I also, I get the error "the service user profile Service has no connection, failed to load the user profile" but I have not been able to correct the problem by following the listed solutions.

    I got the error "the service user profile Service has no connection, failed to load the user profile" when you try to use my desktip.  It is on the login page.  My account icon loads and the guest account. I have enter my password as an administrator and get the error message listed above. I followed all the solutions I could find and it is not corrected.

    I have a slight hitch, after several failed here, I checked the domestic Group on my laptop and I have high listed as connected to the Group Home Office; with all the files.  How can I fix the desk top to coinside with his status of being online.  Yet once, my counter top will not recognize the password, but the desk top shows online in the home group.

    Home Group is Windows 7.

    Here is the Vista Forums.

    What operating system do you use?

    Vista info below:

    ·                        Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not work:

    ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    See if the information in the above tutorial will help you.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    Difficulty of a corrupted user profile

    After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/kb/947242

    A temporary profile is loaded after you connect to a Windows Vista-based system

    See you soon.

    Mick Murphy - Microsoft partner

  • What happens when you disable the service "Windows Error Reporting Service" in order to avoid an annoying and misleading popup error message?

    I kept getting annoying "authentication failure.  Please check your user name and password of the account '... xyz. "" error every 30 seconds. "

    I tried to restore my system and antivirus running - even to reinstall my anti-virus.  I deleted the accounts in question and kept still getting the error message.  Note, receive emails has never been a problem.

    I finally disabled the element of the system of "Windows Error Reporting Service" MS configuration and now the error pop ups have disappeared.  Is it correct to keep this function disabled?

    Thank you.

    To check the event logs, go to start / Control Panel / administrative tools / event handler.

    To achieve the reliability and performance monitor, go to start / search and type in reliability, and then double-click the program icon that appears.

    I hope this helps.  You can always check these sites periodically and do not need WER to warn you of a problem (even if it is perhaps faster) - you can check manually.  WER serves a purpose and he gives notification of a problem (which is good), but not in the circumstances that you knew.  This is a "nice to have" feature - not absolutely necessary.  We can try testing again to see if we can find the problem with WER if you're at it - or you can simply leave it off and make periodic checks of manual (decision is yours).

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Windows Error Reporting service stopped recording of events in the event log, and now when it spawns werfault.exe, the process consumes the CPU until he is killed.

    Windows error reporting service ceased to record events in the event viewer. The last successful entry was 26/03/2010. Since then whenever the service generates Werfault.exe to handle the error, the process seems stuck in a loop of consumer processor, but do nothing. It uses 99% of CPU (80% preferred), is not e/s and number of handles, thread, & working set do not develop.

    Three Windows updates were installed in shortly after the last successful log entry (automatic update is enabled):

    KB915597 def 1.79.702.0 & def 1.79.495.0 both for Windows Defender

    KB980182 for IE 7

    I think that my system is clean, at least Spyware Doctor think it is. I also did some tests Ad-Aware. Windows Defender analyzes every day without error.

    Has anyone else encountered this problem?

    Hi Wannknow,

    It's good information - and thanks for the thanks! You really only need to run an adware or virus (malware) program at the same time. What I would recommend is that you choose an adware program - either "Windows Defender" or "spyware doctor" and disable the other. This can be your root problem, so at this point I turn back on 'report of problems and solutions' and see if you experience the same problem:

    Again, here are the instructions:

    1. open Control Panel. (Press Ctrl-ESC and type 'control' is faster access method).

    2. click on "System and Maintenance" and then click "problem reports and solution."

    3. click on change settings in the left panel of the problem reports and Solutions window.

    4. Select Advanced settings.  In the "for my programs, problem report is: ' select 'off '. Click on CLOSE the

    Hope this helps,

    Steve <> Microsoft partner

  • Problem connecting to Windows Error Reporting Service

    Some reports may not be uploaded to the "Windows Error Reporting Service". Please try again later.

    How much later?

    Hi Bob,

    Welcome to the Microsoft community.

    According to the application, you experience problems connecting to the Windows Error Reporting Service.

    To help solve your problem better, could you give us the following information?

    1. Since when are you facing this problem?
    2. Do you receive an error message when you connect to the Windows Error Reporting Service?

    Method 1: check if Windows Error Reporting Service is started or not.

    1. click on start

    2. in the start search box, type Services

    3. click right on - RUN as ADMINISTRATOR

    Check if the below mentioned services has mentioned State and type start.

    Windows Error Reporting Service started Automatic\Manual.

    Also check the dependency services that are required for Windows Error Reporting Service to run.

    To verify that double-click the service, and click the Dependencies tab.

    Method 2: I suggest you run the checker system (SFC) analysis files and check if it helps.

    See the Microsoft support Article to start the scanning of the SFC.

    Use the System File Checker tool to repair missing or corrupted system files

    http://support.Microsoft.com/kb/929833/en-us

    Method 3: use the cleanup utility disk and check if it helps.

    See the Microsoft Help Article on how to perform a disk cleanup.

    http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

    For any future reference.

    https://TechNet.Microsoft.com/en-us/library/bb490841.aspx

    Try these steps and let us know the results for assistance.

    Thank you

  • Problem connecting to the Windows error reporting service

    Whenever I try to check for solutions in the Windows 7 Action Center, I get the following error message: problem connecting to the Windows error reporting service. Some of the reports can not be uploaded to the Windows error reporting service. Please try again later.

    This problem began to appear a few days ago, even if I did not any changes to my computer. I do not have any firewall (with the exception of the default Windows Firewall) and all my other programs work very well on the Internet.

    Any ideas what could cause the problem?

    Problem solved.

    I actually had to purge all existing reports by using the disk cleanup utility.

  • Windows Error Reporting service connection failed

    For some unknown reason to me, the Windows Error Reporting service has decided that it cannot send crash reports to Microsoft.

    I get the above error when I try to "Find a solution" review problem reports dialog. 'Try again later' does not work. I've tried several "recommended fixes' including digitization of system files corrupted, by ensuring that the WER service is running, and check firewall issues. Reports of incidents used to work, so I'm at a loss as to why this is happening. Can someone shed light on the possible cause?

    Hi BaradaNikto,

    Thanks for the reply.

    Before you repair your operating system, you can purge all existing reports by using the disk cleanup utility, and then see if you get the error.

    For the instructions, you can consult this article. Delete files using disk cleanup

    http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

    If this is not enough, please answer with the information asked Gerry C J Cornell , which will help us to solve the problem.

  • Windows Error Reporting service not connected to the internet

    Since the center of the Action, when checking for Solutions is selected, the following error message is returned;

    Problem connecting to the Windows error reporting service.  Some of the reports can not be uploaded to the Windows error reporting service.  Please try again later.

    I had the same problem with Vista and now 7 does too.  Any ideas?  (I know that I'm connected to the internet, as I am posting this...)

    Hello Mr. Merritt,

    Welcome to the Microsoft Answers Forum!

    To solve the problem better, please let us know the details mentioned below.
    (a) if it works well before?
    (b) have you done with the latest changes on the computer?
    (c) is your computer connected to any domain?

    I suggest you to check if error reporting service Windows has stopped working. Try to start the service by following the steps below:

    Click Start > type of search in the services box, press enter > find windows error reporting service in the list of the list of services > right click and then click Start.

    Also run the service as automatic, please follow the steps below.

    Right-click on the service from the list of windows error reporting services and then click on properties > there will be a pop-up screen > check for startup type and select Automatic under drop down menu and apply the settings.

    Also I suggest you to temporarily disable the security software and settings of the firewall and check if it helps you to solve the problem.

    I hope this information helps. Please get back to us if you have any other questions on this subject.

    Thanks and greetings
    Mir - Microsoft Answers Support Engineer                                                              
    Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads

  • 10.2 Gold: libpng error: zlib wrong settings

    10.2 IDE before the Gold version, everything works well.

    libpng error: zlib wrong settings

    Now, with the Gold Medal:

    ---------------

    1. with the help of 10.1 SDK works fine in OS 10.1

    2. with the help of 10.1 or 10.2 SDK sucks in OS 10.2 gold.

    3. the app complied 10.1 works IDE & SDK very well in OS 10.2 gold.

    Everything works fine on OS 10.2.0.341, but NOT under 10.2.0.1157

    Front of gold:

    ---------------

    1 10.2 beta IDE with 10.1 SDK works fine in Mac OS 10.2 beta.

    How to solve this problem?

    In my case, it's proven does not have a bug in the operating system. I included sources of zlib in my project. This has worked well up to 10.2 Beta. With 10.2, it gave the error message mentioned because 10.2 links of gold for a more recent version of libpng, which apparently does not work with older versions of zlib. Delete the sources of zlib to my project has solved the problem. I would say that there is a good chance that this also applies to your case.

  • Problem connecting to the Windows error reporting service. Some of the reports can not be uploaded to the Windows error reporting service. Please try again later.

    Hello

    When I present reports of error and asks me to send additional information, I get the above error. I have read and tried all the solutions already asked for this problem except for the removal of error reports (because if I do that, how could they be downloaded for analysis?)

    Just to confirm, I have:
    Restarted with a clean Windows with only Microsoft services running and no boot entry and retried the upload.
    A ran the SFC system without any problems.
    Insured to the logs and alerts are allowed through the firewall and temporarily disabled my virus scanner traffic analysis

    The persistent questions seem to be Google Reader goes down, and several accidents related to my AMD video driver.

    Hope you can help.

    Hi Kyle,.

    Did you do any change in software of hardware on the computer before this problem?

    You can read the following steps and check if it works.

    Method 1:

    Check if error reporting is enabled.

    For do I suggest you check if error reporting service Windows has stopped working. Try to start the service by following the steps below:

    a. click Start> type of search in the servicesbox, press enter > find windows error reporting service in the list of the list of services > right click , and then click Start.

    (b) also to run the service as Auto, please follow the steps below.

    c. right-click on the service from the list of windows error reporting services and then click Properties > there will be a pop-up screen > check for startup type and select Automatic under drop down menu and apply the settings.

    Note:

    The purge will remove the existing report but if the problem reappears to collect the reports again and you will be able to move forward with the process of reporting errors.

    Purge all existing reports by using the disk cleanup utility, and then see if you can send information to the server of problem reports.

    Refer to this help article.

    Delete files using disk cleanup

    http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

    Method 2:

    Please refer to Google Drive Known Issues, you can also ask your question in the support of Google using Google Drive question forums.

    For the problem with the AMD video driver, you can try to update the drivers for the latest on the manufacturer 's Web site and check if that helps.

    To know better the question you can always check the event viewer details related to the issue.

    With the event in the Event Viewer logs, you can get information about your hardware, software and components of the system and monitor the events of security on a local or remote computer. Event logs can help you identify and diagnose the source of current system problems or help you predict potential system problems.

    Open event viewer

    http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

    Please return to the State of the issue and also let us know in case you need assistance on issues related to Windows.

  • Gettitng error message "service error: Windows cannot start the BITS service on Local computer" when you start BITS service

    When I try to start the Windows Services BITS service, I get the popup error message "service error: Windows cannot start the BITS service on Local computer.»  Error 2 ther system cannot find the file specified. »

    Where can I find the required file?  It is available from Microsoft to download?

    Thank you

    It could be a missing/incorrect servicesdll value. See if a request would help the BFE (#11) service registry fix in this page:

    Register various fixes for Windows 7/XP/Vista:
    http://www.Winhelponline.com/blog/Misc-registry-fixes-for-Windows-7-XP-Vista/

  • Getting error messgae"problem connecting to the Windows Error Reporting Service. Please try again later! "when you use the error report feature

    Original title: error report function

    When I use the error report feature a warning appears "problem connecting to the Windows Error Reporting Service. Please try again later! »

    It started some time ago and I have plenty of backup errors.

    Using W7

    Hi John,.

    I suggest running Disk Cleanup and selecting Remove all the Windows Error Reporting log files by selecting the checkbox and then click OK:
    Check if you are then able to start the Windows Error Reporting Service.

Maybe you are looking for


HashFlare