Real-time System Manager

Hello world

How can I open real-time System Manager to monitor on my project of myRIO resourses?

I've already activated the VI server on the target.

If I select Tools-> real-time Module I find only "Project Wizard", "set up Time-triggered network" and "viewer of Trace".

Thank you in advance,

Lorenzo

The "Distributed System Manager" is an application/executable separated - you can find it, if installed, on the start menu under the folder "National Instruments". If it is not there, then you probably have installed as part of your installation - raise your LV Installer and choose to install.

Alternatively, you can use the System Configuration API to read the various parameters (e.g. CPU / memory) on the target itself to monitoring the health of the system.

Tags: NI Products

Similar Questions

  • Realtek AC97 Audio Driver works on my map its microsoft? (under vista and need some sort of broad legalization of real-time system)

    Vista and the need for a kind of wide equalization system in real time for audio... and this driver seems to provide what I need... but will it work on my microsoft Driver card hd audio?  If it is not possible, then what program could I use for an equalizer?

    Hello

    What is the model number of your sound card?

    The drivers are specific to a device.  RealTek drivers don't work for its Microsoft Map, you must install the correct driver for your device package works very well.

    For more information about the driver, see the links below

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

     

    Update drivers: recommended links
    http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

     

    Equalizer you can see link below, also look on the internet for software that can help you in this task.

    Change bass, stereo, and other audio effects in Windows Media Player

    http://Windows.Microsoft.com/en-us/Windows-Vista/change-bass-stereo-and-other-audio-effects-in-Windows-Media-Player

    Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  • NOR-DAQmx compatibility with the system in real time

    I try to use a time system 11 with LabVIEW Real-time. When I try to connect with the driver OR DAQmx, an error saying that the version of the NOR-DAQmx drivers are bundles with the one on the real time. I tried to use different versions of the NOR-DAQmx drivers that are available in the table of compatibility, but not those who worked. I have an old computer working with the same real-time system that uses LabVIEW 9 and has the driver NOR-DAQmx 9.3.5 f0 driver installed on it but I can't find the drivers on the web. What should I do?

    I am using LabVIEW 2015 in my current computer.

    Thanks in advance.

    Looks like you can just have a lag in the versions of software installed on your host computer and the target.  In order to deploy the code from your host to your target, the two must have corresponding to libraries of functions.  See this link for instructions on updated versions of the software on your target match those installed on your host computer, the wizard of the LabVIEW RT software.  If you have already done this, and it did not help, please provide a screenshot or error code of the message that is to appear.

  • Real-time target - change IP and shared network varables

    Hello

    I create an application for the system in time real (Compact RIO).

    All data between the (current running on a windows PC-based) GUI and the real time system - is transferred via shared network variables.

    Shared variables are hosted on the target.

    I attributed the static IP address to the real-time target.

    Now for the question:

    After the deployment of the application in real time on the Rio target compact

    If I change the IP address of the target: how the shared variables 'know' to connect to the target?

    There is no place in the GUI (running on windows PC based) I set the IP address of the target.

    So I change the IP Address of the target (and for the sake of argument if I change the IP address of the PC, but they are always on the same subnet) - how to 'know' how to connect?

    Looks like a basic question I am absolutely certain I'm missing something to understand shared variable...

    Thnaks

    Hello Hazkel,

    The IP address of your shared time variable real target is located in the *.aliases file when you create an executable file, you will need to change there.  See the example below:

  • No device available in real-time on desktop PC mode

    An acquisition of data of my friends computer built in the following maps:

    PCI-6229
    PXI-6259 (via the pxi-1033 chassis)

    They are very well known and work perfectly start this computer with Windows XP.

    If I start that computer with a hard drive in real time of "Microcomputer", I don't see any two devices in MAX. I do not see the PXI-1033 chassis, but all locations are listed as empty.
    I would have assumed that at least the PCI-6229 would show up - but no.
    My desktop PC real-time system has all of the installed packages available.

    What can be the problem?

    Hello

    Hello and I hope that your well today.

    Thanks for the post!

    If you try to bit the PC in real-time under remote systems in MAX from another machine?

    What version of DAQmx did you installed on the remote PC in real time?

    Lack of devices OR-DAQmx in Measurement & Automation Explorer (MAX) under systems remotely (target real time)

    http://digital.NI.com/public.nsf/allkb/6B06A4E228CF62098625750000614B57?OpenDocument

    Deployment of DAQmx on PC in real-time

    http://digital.NI.com/public.nsf/allkb/79CB44F7E228AED88625756E00445151?OpenDocument

    Hope it starts to help,

  • Robotics/control system with LabView real-time + OR DAQ

    Hello

    I am building this real time application in which you can try control methods for a particular system (construction of the algorithm of control in LabView on Windows) and then with a DAQ board (I have the E-Series SCB-68) communicate with the hardware (actuators).

    Is this DAQ card enough or should I try with any other advice? For the application considered, it is important that the price of the freq is at least 1 kHz.

    Thanks in advance

    The 6220's card perfectly fine for your current application.  It is true that windows is not deterministic and cannot compete with the hardware/software in real time, but your DAQ will be responsible for the management of timing and synchronization you will be fine.  If the advance until you need a very quick response in real time of your application, you can always buy a RT LV system.

  • Install Windows on SMU-8133 (with time real operating system already installed)

    Hi all

    I have an SMU-8133 NI with a real-time operating system (OR Real - Time PharLap 13.1). Now I want to install Windows on it and make it dual-boot (I want to keep the original real time operating system). So my question is how do I install Windows without erasing the current real time operating system?

    I tried to just install Win7 (starting from USB) but it says "Windows cannot be installed on disk 0 Partition 1" because she needs NTFS (what we have is the FAT I think). If Win7 is unavailable, Windows XP is also correct, but I still prefer Win7.

    Thank you!

    As a general rule, Windows don't play well with other operating systems installed on a drive, there will be some efforts to preserve the existing installation of RT OS if it is a requirement.  The simplest approach would be to wipe the entire disk, installing Windows and then reinstall LabVIEW RT.

    If you can start from scratch, you must first make sure that the partitioning is correct.  Since you did not purchase this as a Windows / controller dual boot RT initially, you do not have Windows installation media OR, correctly configure the partitions from disk for you.  You will need to do this manually during the installation of Windows.  The best approach is to create two partitions, one for the RT and a Windows.  RT the partition must be the first partition on the disk.  Install Windows on the second partition.  Once Windows is installed, convert the 1st partition to FAT32 using the built in Windows or a 3rd party partitioning tool utilities.  You should now have a system with Windows installed correctly and ready to be fitted to RT.

    Change your SMU-8133 to boot RT using the BIOS Setup menu or hardware DIP switch.  It should boot to safemode RT.  From another host PC, find your target in MAX.

    You can now put your target if you want to switch to the FAT32 file system the system of dependency files.  You can do this through MAX, or by using the utility RT USB key.  See herefor details on this step.

    Warning: Before doing this, ensure a MAXIMUM target shows already the correct amount of disk space for partition 1, you created.  If the RT operating system can see a usable partition (FAT32 or dependency) it will set up only that partition by avoiding to touch the rest of the disc.  If the 1st partition is not used, the formatting process will claim rather all of the disk because no usable partition has been found, and you may lose your Windows installation.

    After that, you can perform the installation of the RT of MAX software as usual.

    If you try to preserve your existing installation, you can try to combine the above process with one of the options available for the creation and restoration of RT disk images, although I am not very familiar with these tools and can not comment or creating an image on a single disk partition and restaurant then a disc multi-partition will be successful.  Here is a good linkto start with which describes the options available.

    -JoshH

  • monitor thread on the system in real time

    I have a SMU-8101 controller in my PXI system. I have it running with a system of operating in real time. I inherited some software WHICH has been used on a program of LabWindows used on a PC with a Windows 7 operating system. The SOFTWARE seems to work OK. My problem is when I leave the program I get an ERROR of EXECUTION NOT DEADLY

    "

    Source position thread ID unknown 0x000000EC

    Your CVI program ended on the target in real time. However, there still on the target in real time, the threads that are running or have already run the CVI code.

    Please check that your application cleans all its threads. Son left running after that your application can crash the target in real time when your application is unloaded.

    "

    As I said I got the code and there is a lot of it. I am looking for a smart way to track down these threads. I was wondering if there are tools available that could help with this? Or any other suggestions on how to run these lines down?

    Hi DPearce,

    This article knowledge base has some information on why CmtDiscardThreadPool causes your program hang and gives some recommendations for fixing it.

  • Using FTPClient on a real time with system Exec.vi

    How can I tell FTPClient.exe address target when I start this executable with system Exec.vi in Labview?  I don't want to reinvent the file FTP utility used by MAX with targets in real time. I want to run this executable to a labview support utility without using MAX to do.

    Is this possible?

    Danny

    Thanks for the info.  Your "bad mood" response "suggests" a response to my question.  However, the full answer to my original question is that it is not possible to use FTPClient.exe outside MAX.  It is therefore not possible to spend in the address target at run time if the FTPClient.exe runs external to MAX.  FileZilla is a good choice - there are also other FTP clients out there, but you pointed out a solid choice.  Thank you.

  • Can I download a background on the system in real time and run it?

    Hi, I would like to take advantage of some tools in the system in real time.

    I thought that I could download it by file transfer,

    and then did something like this in the system in real time.

    Probably it is not...

    However, there is other ways to achieve my thought in the system in real time?

    Do you mean the exe was built for windows, so that it is not allowed to run in time real system?

    Fix.

    I have to communicate between CompactRIO and servers through an ethernet cable...

    so... you write a program runs on the cRIO and bring it to your servers over TCP.

  • Updated in real-time with text of exec system indicator

    I was wondering if anyone knows how to get LabVIEW to update an indicator of text with information from a command prompt in real time?  So, as if you ping IP show he ping and not just wait until the end to update it.  I try to have a batch file that processes the code displayed on screen so that the user can see that she is running and that it is not frozen.  When I ran the test originally she had a cmd window pop up and show that information was passing.  Since I opened the program with the exec system, it no longer displays anything so I thought that if she showed in a text indicator the problem could be solved.

    Thank you

    Derek

    Help for the system Exec VI

    (Windows) To use a DOS command, insert cmd /c before the command.

    Then try this way the system Exec VI

    cmd /c 172.18.81.54>"C:\temp.txt ping.

    Change the IP address to your needs.

    The quotation marks around the path is necessary if you have spaces in the path of the file.

    Now when you do this you will get nothing back from the exit of stardard, because you have redirected it.

    The results should be read from the file.

  • On a Linux operating system, what tools need to developed a real-time application that communicates with FPGA?

    On a Linux operating system, what tools need to developed a real-time application communicating with FPGA?

    It is not unclear to me by reading the documentation on the website OR tools or drivers should I install on a Linux operating system in order to develop a C++ real-time application (that interact with FPGA) which will take place on a sbRIO-9651.

    Is this possible at all?

    Thank you

    Michel

    Everything works very well with an FPGA VI, compiled with LabVIEW FPGA 2015.

    1. I have installed Eclipse on CentOS 7 with cross-compiler found at this link:

    Compilers C & C++ GNU for Linux ARMv7 (Linux host) 2014

    2. I also install a debugger crossed to debug application c / c++ remotly. Once on the page go in the section "Linaro Toolchain for Cortex-A" and download the second link linux "linaro-toolchain-binary (big-endian).  The binary gdb is in there, so you must point towards him in the Eclipse debug configuration:

    Linaro Toolchain for Cortex-A

    3. I installed the linux drivers from NOR-RIO 15:

    Driver OR RIO 15.0 for Linux

    4. I was able to program an application to c / c++ opening and running a LabVIEW FPGA Bitstream in a few steps:

    Example of API Interface FPGA C OR real time Linux and Eclipse

    Michel

  • GetDiskSpace on real-time operating system

    Is it possible to query the free space on the disk in a PXI system running the operating system in real time.   I get a lot of linker errors when trying to use the GetDiskSpace function which works under Windows. (In Labview, it is apparently something called read Volume information but I was not able to find an analogue to the CVI 8.5)

    Jim

    Hey Jim -.

    The problem is that GetDiskSpace is implemented in the Toolbox of programmers, who is not yet supported on Pharlap.  However, you should be able to pull parts off toolbox.c (\CVI85\toolslib\toolbox\toolbox.c).  All the work to get this function is done by the GetDiskFreeSpaceExWin32 API function, which is supported on Pharlap.

    Take a look at the source code and let me know if you have any questions.

    NickB

    National Instruments

  • Install OR Vision on the system in real time

    Hello

    I am trying to install NI Vision RT and NOR-IMAQ RT on my controller PXI-8108. However, I still get an error, there are unresolved dependencies and that some version of NIVISSVC is necessary.

    Does anyone know a solution to my problem?

    Is this problem related to the problem described in the knowledge base (Document ID: 46PK6PP6)?

    Some data from my host system:

    -LabVIEW 8.6.1

    -Measurement & Automation Explorer 4.6.1

    -NI Vision 8.6 (treatment of Image and Machine Vision, and Services)

    NOR-IMAQ 4.1

    OR-IMAQ I/O 2.2

    NOR-IMAQdx 3.2

    The PXI controller:

    PXI system (OR PXI-8108)

    PCI-GPIB

    -Chassis 1 (PXI-1042 (q)

    PXI-6733

    OR PXI-8432/4

    PXI-6233

    Thanks in advance for your help

    Bernd

    After installing Vision 9.0 and NOR-IMAQ 4.4 on my host, I had no more problems with the installation on the system in real time.

  • The 1473R CAN be used with the real-time operating system of NOR?

    Hello, I am trying to determine if I can use the OR 1473R framegrabber PCIe FPGA in a PC based computer time real OS OR. Anyone know if this is possible? So I think that it should appear to the OS in real-time as a target FPGA that can transfer the data via DMA, but I wanted to make sure the drivers would work in real time of NEITHER.

    I appreciate any info on this!

    lukepike,

    Yes, you can use this device with real-time OS of NOR.

Maybe you are looking for

  • How can I restore my emails that they don't?

    My emails aren't coming since 09:00 this am and it is simply not possible. Don't know if I did something that I have or what is happening. Can you help me?

  • Tecra M9 - no hard drive when installing XP

    Hi people, I've scoured Google, and it is a common problem with SATA drives.There is an easy way to just change the Bios to IDE, then install XP and restore after. It's problem... the V1.5 of the ACPI Bios has no options to make this change, or switc

  • HP officejet 8699 N911: enlarge or reduce to printer

    I have the officejet printer all-in-one 8600n911. I use it wireless with window 8.1.  I bought specifically to reduce or enlarge the print.  But during the audit, I can not uncheck where it notes page is 100%. When I print something, it comes out to

  • Missing features on the meeting place 8 Android

    I held my 8 for a week now. Seems they took a bit of functionality. Probably to justify the low price. -No multi user option. -No shortcuts app lock screen (it has no lock screen widget) there is an icon at the bottom of the lock screen, but the only

  • Installation of Office Professional 2007

    Hi all OK, it's just a check I installed Office Professional 207 on my PC and the new generation, the new install of Win 7, all with Office 2007 so far seems OK. However the odd thing is that when installing it counts only disc one & without any poin