Reallocation of areas may appear too early

Hello.
I have two Sandisk Extreme 240 GB on two different computers.
I have both drives update the firmware R211.
The SMART data says:
Latest for both, business sectors redeployed 1 to 28 days.
For the oldest, 61 days and 13 reallocated sectors.

Both systems use the ext4 Linux format.
I use 'noatime' on the fstab mount options and mount "/ tmp" on a ram-disk to avoid unnecessary stress for the SSD... for that, I was really surprised to read these values.

Is the normal amount of reallocated sectors or should I expect a premature death of my SSD?

Thank you.

Ah good. happy that they take care of you.

Tags: SanDisk SSD

Similar Questions

  • Version of VI is still too early to convert the last version of LabView

    I get this error when deploying a simple loop VI I try to troubleshoot the symptom of not being able to connect to the remote control.

    I have LabView 2014 SP1 version 14.0.1 installed and that's what I used to build the VI (see attachment).  The version of the software on the cDAQ 9139 I work with ranges from 14.0.1 for real-time 14.2.0 for DAQmx 14.5.0 or Web Application Server.  (See attachment).

    How can we still too early to convert to the current version, if the software LabView 2014 is installed on the cDAQ has VI created in LabView 2014?

    Again, the symptom that I see is "Server does not support remote façade panels" when you try to access the façade of a web browser.   I confirmed by working with our it Department IS not blocking all communication.  The Blue Coat standard software is not installed on the computer, I'm trying to access the Panel of (I also tried to connect to the remote control of my computer at home that has no software IS on it with the same results).  Anything related to the NC was added as exceptions to the firewall.  I have tried a large number of configurations of ports and worked through the troubleshooting list, you can find on NI.com when you search for this error.  There must be something tiny miss me.

    In addition, nobody knows what the two links in the HTML file that is generated when you use the Web publishing tool are supposed to do?  One is a FTP link and the other is a link to the plugins page.

    I took two step forward on this issue.  First of all, I reformatted the hard drive of the cDAQ and reinstalled only most of the software as before, I had been all install available on the host the cDAQ.  This seems to have fixed the error 'version of VI is too early to convert the last version of LabView.  Secondly, I discovered an error in my understanding of the port settings.

    In the configuration of the cDAQ web screen, the web application server is listed as port 8080, by default I believe.

    In the properties cDAQ in the Project Explorer window, the web server has been changed on port 80 to eliminate the need to put in the port number to access the remote control.

    I'm sure it's an assumption on my part, and oblivion, but I thought that those who have the same parameter with just the ability to be set from two different places.

    When I try to access the remote control via the web browser uses the web application server port listed in the views of web configuration, I received the error "server does not support the remote panels.  When I try to access the remote control via the web browser using the port listed in the properties of the CDAQ project for remote control Server Explorer, I could see and interact with the remote control.

    This probably also makes perfect sense now that I understand they serve two different goals, but if you define two ports at the same address, you will get the error "server does not support the remote panels.  Interesting that it always provides the correct html page.

    I am sure it was my problem throughout linked to the issue of the remote control.  I was probably just lucky when I put the Panel remote port server during the initial setup and my luck ran out when I upgraded to LabView 2014.

    Hope this helps people who may have the same assumptions I made.

  • lvwutil32 version too early on down to the last version of LabVIEW?

    Hi all

    I want to order the Platinum windows with some of the useful vis stored inside the lvwutil32 lib. However when I tried to open the screw inside the library, an error message saying that the vi version (4.0) is still too early to be converted into my latest version of LabVIEW (8.5.1).

    Is anyway to convert the usable by my course LabVIEW vi? It is a great shame from the Readme file that accompanies the lvwutil32, it seems that there are a lot of useful screws that I would find very useful for my projects.

    Hope someone could provide help on this. Thank you!

    Here is both.

    Don't see much sense in the lvterm.vi. It could be written from scratch in a short time and with the structure of the event, be a better program.

  • DeskJet 3520 prints paper usually ok but food takes hold of the sheets of labels Avery too early

    I have a Deskjet 3520 eAIO (wireless). Print labels Avery fine on other printers, but when I try to print them on the 3520, it seems to start to give the sheet of labels too early which means printing from more down the page (about 1/2 "") as it should. My 8 + yr old Canon print all types of avery labels with no problem, but he just finally bit the dust and I'm stuck.

    Hi panavygirl,

    I understand that you have a problem with printing labels Avery to your Deskjet 3520 printer. I'll try my best to help you solve this problem. Could you please tell me the model number of your printer and the operating system that you are running on your computer?

    HP Deskjet 3520 e-all-in-one and e-all-in-one printer, HP Deskjet Ink Advantage 3520 product specifications the table below shows the types of paper supported. This printer doesn't support label paper. That said when you choose the type of paper in the advance printing preferences menu, try to choose a paper to heavier weight for the printing of labels.

    The following table contains a list of sizes and types of paper supported.
  • TS4.2: VI too early to convert

    Hello

    I get the error-18002 VI too early to convert when I run a file of sequence TestStand 4.2 with TestStand Base Deployment Engine. I created the installer of the deployment with the deployment in TS4.2 tool and installed on a second system. I have added all the necessary runtimes LV and pilots incl. TestStand deployment engine. All installed software shown in the MAX are equal to the developing system. But on the target system, I still have the mentioned error. So I looked on the Forum of NEITHER and found a similar problem, but no real solution for this. I think, that the TestStand Base Deployment Engine on the system target chooses runtime LV evil, something higher then 8.2.1 (this is the version of VI). When I change the map of Labview the development of the system for 8.6.1, I get the same error. But with 8.2.1, everything works well.

    How can I change the default Version of Runtime of LabView for TestStand Base Deployment Engine?

    Thnaks in advance

    M. Tiedje

    You can copy the exe from the user interface to the target system (or deploy with your application). You can find the compiled version of the "full UI recommended" in the directory C:\Documents and Settings\All Users\Documents\National Instruments\TestStand 4.2\UserInterfaces\Full-Featured if you have installed the default directory.

    hope this helps,

    Norbert

  • Outlook Express - my sent messages are not appearing in my "Sent items" folder.

    E-mails are not appearing in my "Sent items" folder  How can I fix it?

    Tools | Options | Send. Is the ability to save a copy in sent items checked? If it is already, you have corruption of dbx files.
     
     
    Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.
     
    Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
     
    In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.
     
    With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.
     
    After you're done, followed by compacting your folders manually while working * off * and do it often.
     
    Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.
     
    General precautions for Outlook Express:
     
    Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.
     
    Information on the maximum size of the .dbx files that are used by Outlook Express:
    http://support.Microsoft.com/?kbid=903095
     
    Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
    http://www.oehelp.com/OETips.aspx#3 
     
    Why you don't need your anti-virus to scan your email
    http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm
     
    Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.
     
    Compact often as specified above.
     
    And backup often.
     
    Outlook Express Quick Backup (OEQB Freeware)
    http://www.oehelp.com/OEBackup/default.aspx 
  • When I turn on my computer, it gets stuck on the ultra-portable gigabyte 3 screen and custom which leave me there 2 hours still no luck the only button that works are TAB rebooting too

    Original title: stuck

    When I turn on my computer, it gets stuck on ultra-portable gigabyte 3 screen and custom wide movement which I gave 2 hours still no luck the only button that works are TAB restart too it can someone help please

    Follow these steps:

    Step 1: Start the computer in safe mode and check if the problem persists.

    A description of the options to start in Windows XP Mode

    http://support.Microsoft.com/kb/315222

    Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Start, run.

    (b) type msconfigand click OK.

    (c) the System Configuration Utility dialog box appears.

    (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

    (e) when you are prompted, click on restart to restart the computer.

  • keyboard problem: @ key appear ", AND" key appear @, too... well

    keyboard problem I use the keyboard to uk vs usa? @ key appear ", AND" key appear @, too... right?

    Hi Ise,

    If you are using a UK keyboard you must ensure that the United Kingdom is selected in the "Region and language" section of the control panel. Open Control Panel and click the language and region. Once the window opens, click the keyboard and languages tab. In the keyboard tab window, click the button of "change of keyboard". In this window check that the English (United Kingdom) is the default language in the "default input language section dialog box. If it is USA then click on the arrow down and change it to the United Kingdom. If UK is not there, then click on the Add button to add this language.

    This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

    John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

  • Photos marked as favourites on the iPhone are not appearing in the Favorites folder in the pictures on Mac

    I mark my favorite photos directly on the iPhone. When downloaded from Photos on iMac selected Photos "Favorites" on the iPhone are NOT appearing in the Favorites folder.

    Apple forces us to use iCloud to operate? Because that I do not use iCloud and I used!

    IF you do not use iCloud photo library, favorite sides will not be synchronized.

  • Windows Live Mail error: the authentication setting are may not be wrong for your e-mail [SMTP] Server outgoing.

    The message could not be sent. The authentication setting are may not be wrong for your e-mail [SMTP] Server outgoing. To resolve this issue, go to help, search for "Troubleshoot Windows Live Mail" and read the section "I have problems sending e-mail". If you need help to determine the appropriate server settings, contact your e-mail service provider.

    The rejected e-mail address was * address email is removed from the privacy *'.

    List of topics 'b - day.
    Server error: 554
    Server response: 554 Authentication Failed, must login
    Server: 'smtp.mail.wowway.com '.
    Windows Live Mail error ID: 0x800CCC79
    Protocol: SMTP
    Port: 25
    Secure (SSL): No.

    How can I fix it?

    original title: 554 error when sending email

    View all Windows Live and Hotmail questions in the appropriate forum found here:
    http://windowslivehelp.com/

  • My MB died and after to put the HARD drive in the new XP machine crashes before the activation screen may appear.

    Original title: XP Pro crashes when MB died and move new HDD PC.

    My MB died and after to put the HARD drive in the new XP machine crashes before the activation screen may appear.

    I can access the HARD drive if I boot from another HARD drive (delivered with the Machine).  Windows just hangs.

    Thanks for any help...

    Hello

    If you try to boot from the hard disk on which windows was installed by using another computer and then, you will not be able to boot from it. You can try to perform a Windows XP repair install and check.

  • Outlook express seems tied up. I may have too many emails stored?

    Outlook Express seemed tied up. When I try to open it, spikes of memory, I may have too many stored emails.

    This site is for the comments of Microsoft answers. Your message should have been asked in this forum and will be probably moved here.

    XP - Networking, Mail, and getting online Forum
    http://social.answers.Microsoft.com/forums/en-us/xpnetwork/threads

    A better description of your problem would be useful.

    1. OE start?
    2. It is completely freeze or hang?
    3. Can you get in tools | Options to make changes?

    Start here.

    When OE crashes or won't start
    http://www.insideoe.com/problems/errors.htm#crash

    Bruce Hagen
    MS - MVP October 1, 2004 ~ September 30, 2010
    Imperial Beach, CA

  • Windows Mail: Message could not be sent. The authentication setting are may not be wrong for your e-mail [SMTP] Server outgoing.

    The message could not be sent. The authentication setting are may not be wrong for your e-mail [SMTP] Server outgoing. To resolve this issue, go to help, search for "Troubleshoot Windows Mail" and read the section "I have problems sending e-mail". If you need help to determine the appropriate server settings, contact your e-mail service provider.

    The rejected e-mail address was * address email is removed from the privacy *'. "Subject 'Welder must build raised bed (Georgetown)', account: 'pop.gmail.com', server: 'smtp.live.com', Protocol: S account: 'pop3', server: 'pop.gmail.com', Protocol: POP3, server response: '-ERR not supported ca5pf6356717vdc.15', Port: 995, secure (SSL): Yes, Server error: 0x800CCC90, error number: 0x800CCC18MTP, server response: ' 530 5.7.0 must issue a STARTTLS command first ', Port: 587, secure (SSL): no, the message could be sent. The authentication setting are may not be wrong for your e-mail [SMTP] Server outgoing. To resolve this issue, go to help, search for "Troubleshoot Windows Mail" and read the section "I have problems sending e-mail". If you need help to determine the appropriate server settings, contact your e-mail service provider.

    The rejected e-mail address was * address email is removed from the privacy *'. Object ' Roadtechs.com post: PIPEFITTERS NEED LOUISIANA ', account: 'pop3', server: 'smtp.gmail.com', Protocol: SMTP, server response: 530 5.7.0 must issue a STARTTLS command first. r5sm16402004vdg.17', Port: 587, secure (SSL): no, Server error: 530, error number: 0x800CCC78Server error: 530, error number: 0x800CCC78

    Ensure that the analysis of the electronic mail is disabled (see www.oehelp.com/OETips.aspx#3).  Then delete the account completely and compact and repair the database (see www.oehelp.com/WMUtil/), and then try to add the account back again.  Also check webmail works fine.

    Steve

  • Dates are not appearing in the column start and Finsh of MS Project 2010. They become W31/4, W31/5, etc. Instead of 7/31/20113. How can I fix it?

    Dates are not appearing in the column start and Finsh of MS Project 2010. They appear rather like W31/4, W31/5, etc. When it should be like this: 7/31/20113. How can I fix it? Note: Dates listed do appear correctly.

    Hello Charlie,.

    You are welcome. It is what we are trying to do... help people! Thanks for letting me know that the problem is solved. Don't forget to mark it as your response so that we can spread the knowledge more far.

    Kind regards

    BearPup

  • Error message: "Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. »

    Original title: problems of residential group after system recovery

    I started a homegroup on my computer.  I added another computer to the homegroup.  Everything worked fine until I had to perform a system recovery on the laptop that I used to start the homegroup.  I implemented the homegroup again, but I can't access the files on the other computer via Windows Media Player.  I get an error message that says "Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. "I can access all the music files via Windows Explorer.  I have to start over with a new password?  Can I just create a new homegroup?  What other options do I have?  You can provide any help would be greatly appreciated.  Thank you.

    Hello

    Please follow the methods and check the issue:

    Method 1:

    Open the homegroup troubleshooting utility:

    http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

    Method 2:

    Why can't I access my homegroup? :

    http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-access-my-HomeGroup

    For reference:

    Homegroup: frequently asked questions:

    http://Windows.Microsoft.com/is-is/Windows7/HomeGroup-frequently-asked-questions

    Method 3:

    See the steps in "include a folder shared in a library" from the link below:

    Access to files and printers on other homegroup computers: http://Windows.Microsoft.com/is-is/Windows7/access-files-and-printers-on-other-HomeGroup-computers

    I hope this helps.

Maybe you are looking for

  • Apple ID lockout - HELP Please

    Hoping someone can help me find my iPad old dads for him. I managed to fix it for him after he threw it on the floor using google/here, but I could not sign in its identifier Apple at the time that he does not accept the email address, that he insist

  • Satellite C660 - 13r PSC0LE - BIOS update problem

    I bought the Satellite c660-13r 11.05.2011 After installing and configuring Internet conection, only he had messages on the Bulletin Board, NEW BIOS update the bios of the laptop of TOSHIBA BULLETIN BOARD. I updated the bios to 1.30 without any probl

  • Impossible to install the latest version of the Realtek Audio worm 6.0.1.7737, A04 on Dell XPS 15 9550 driver

    Question cannot install the latest recommended driver Audio Realtek worm 6.0.1.7737, A04 When you point to the location of the driver is generic message > "Windows has determined the software driver for your device is up to date. "Windows has determi

  • Telepresence server, control assets drops Conference after 30 seconds

    Much of community support. I have the following Setup: 10.5 (1) version CUCM Conductor of telepresence Version XC2.3 Telepresence Virtual Server Version: 4.0 (2.8) EX60 TC 7.1.4 Cisco 9971, Firmware 1.0000 SR1 Some other phones (7962, 6941) All the e

  • Mode for blackBerry Smartphones Bypass in case - Storm2

    Is there a way to bypass mode 'sleep' so that in the case? I use it like a vent riding in my car; It's the only thing I use this holser for and I know that he uses a lot of battery. He will be in a charger while I drive. Any suggestions? Thanks in ad