Really hard! And will not work. Satalite Pro A10

Similar Questions

• Control Panel more HP Officejet Pro 8600 not lit and will not work

  Control Panel more HP Officejet Pro 8600 not lit and will not work. It worked except the last 4 days. I can use certain features of the computer as a scan but can not manually use Control Panel. Nothing DOES not illuminate. The power button is on but only weakly.

  Hi kwhofms,

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

• When I try to activate it with my old key that I got it comes up with an error message saying its an upgrade key and will not work.

  Original title: installation problem windows

  I recently had to reinstall windows for my pc that my HARD drive is dead and when I try to activate it with my old key that I got it comes up with an error message saying its an upgrade key and will not work. Ive phone microsoft and they say, I have to buy a basic disk and then upgrade with the disk that has always worked for me? any suggestions?

  License upgrade and the key that's exactly right, used to upgrade a previous version (Vista, XP) for the version shown on the license (7).

  In order to use this key, you need to pre-install your o/s original eligible before moving to 7.

• My IPad 2 Air is mad, he gets on its own, and it freezes. Not to mention it locks me. Didn't this iPad for 2 days. Have not been able to use it! I tried connecting to ITunes and will not work!

  My IPad 2 Air is mad, he gets on its own, and it freezes. Not to mention it locks me. Didn't this iPad for 2 days. Have not been able to use it! I tried connecting to ITunes and will not work!

  Hi Kareyfabela,

  For this kind of problem, I strongly recommended opening a pension with Apple iPad case will probably require inspection by an Apple engineer. You can open a file on this site: https://www.apple.com/support/contact/

  I hope this helps!

  Jonty

• I accidentally put 100 files on my desktop and it went to black screen and will not work

  I accidentally put 100 files on my desktop and it went to black screen and will not work

  Hello

  Following methods and check if that helps.
  
  Method 1:

  Step 1:

  Start your computer in safe mode and check if it starts very well.
  
  Step 2:

  If the system starts in safe mode, then there would be a third-party software, causing the issue to occur. I wish that you start your machine in a clean boot State. Clean boot helps eliminate conflicts of third party software.

  Note: Follow step 7 to your computer as usual.

  Method 2:

  If this does not help, you can perform System Restore in safe mode.

• Xbox 360 wired controller works only with Windows 8. Xbox 360 Assecories status when I click on it says I have it has been changed or moved, and will not work.

  I have a controller wired xbox 360, not one of these pieces of plug. I put the USB controller and installed the device. However, it does not work. Xbox 360 Assecories status when I click on it says I have it has been changed or moved, and will not work. I have not touched. When I search for a download for Windows 8 all get them are downloads for Windows 7 and below. It's a bit frustrating to not be able to use it. I would be very happy to help.

  Original title: windows 8 wired 360 controller

  I found the problem. I had the appropriate controller and installed the device correctly. This is the program that runs the unit that had either corrupt or missing files. I uninstalled the program and then installed from the Microsoft Download page. Now he works currently. Thanks for the support.

• I hit the button print and adobe freezes and will not work.

  I hit the button print and adobe freezes and will not work.

  What version of Acrobat, what OS, what printer driver? This happens with all documents or only some?

• How to import bookmarks multi-level IE 8 FireFox 17 if IE 8 is broken, cannot re - install and will not work?

  IE 8 is still installed, but will not work. I can not install any version of IE - I tried. I can import only first level bookmarks. Solutions in the forum assume IE 8 work.

  If you have problems with importing IE bookmarks in Firefox, then export favorites in Internet Explorer to a HTML file and import this file in the Firefox Bookmarks Manager.

  If you don't have the menu bar in Internet Explorer, and then right-click on the toolbar above to activate the menu bar.

  • Export Favorites in Internet Explorer to a file (bookmarks.html) HTML:
    File > import and export
  • Import HTML file in Firefox:
    Bookmarks > show all bookmarks > import and backup > import bookmarks HTML: file

  See "Import from another browser" and "import from file":

  • http://KB.mozillazine.org/Import_bookmarks

• 1 t verbatim USB stick not recognized by the system and will not work

  I used my USB from Verbatim 1 t hard drive in the past and it still works on my Vista computer, but know is is a USB 'unrecognized' device and does not work on my XP.  In the system hardware listing is visible, but there is no driver for it and not available from my computer.  This disc is missing?  How can I get this, my backup disk, of the function?

  Hello

  Try the steps of troubleshooting mentioned in the links below and check if the problem persists.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  Note:

  BIOS change / additional settings CMOS (semiconductor) to oxide of metal bad cancause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?

  http://support.Microsoft.com/kb/314634

  Note:

  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows

• When I try to join my stylesheet css Dreamweaver gives me an error saying that my .css file seems to be a .html file and will not work. How can I fix this so I can join my stylesheet?

  I built a css style sheet in Dreamweaver. When I try to attach it to my website html, it prompt me that my 'css file seems to be a .html file and can not attach. I tried to remove the / * / as suggested by other forums, but this has not solved the problem. I was using stylesheets css without problem 2 days ago. Now, I get this error message. How can I fix this so I can join my stylesheet?

  What looks like the code in the CSS file?

  An external CSS file must be written in CSS only (no html tag like,,etc.).

  It must also have a .css file extension, if yours has an extension .html, that it will not work.

• Is it possible to uninstall McAfree branch of vmware Fusion once installed?  My D: drive shows McAfree lnsigna and will NOT work?

  Is there anyway to uninstall vmware Fusion installed security McAfree?  My D: drive has lnsigna it McAfree and does NOT work?

  Is it possible to uninstall McAfree branch of vmware Fusion once installed?

  I'll assume that your question is in fact to return to the physical optical drive (rather than the image of McAfee), does not actually uninstall McAfee.

  Right click on the D: drive and eject it. Then go to the Virtual Machine > CD/DVD and select use physical disk drive. It is documented in the release notes to the title of "The rest McAfee antivirus ISO mounted".

• Windows XP disc ruined by heat (locked in the car) and will not work. Can I replace?

  I bought Windows XP in 2008 at Office Depot. My hard drive has failed and replaced my tech. I blocked the computer and the software in my car and the heat must have messed up my XP disc. I have new hard drive problems and the drive does not work. I have the original disc and all documents, serial number, etc.. Can I get the drive replaced or I have to purchase again? I have to use XP for my plotter HP 1994 not being supported passed XP.

  Hello

  You can check the link below: how to replace lost, broken, or lack of Microsoft software or hardware: http://support.microsoft.com/kb/326246

• Firefox, stop working and will not work. If I use another browser like internet explore, it works fine.

  I checked my firewall and firefox settings to be allowed and also checked my proxy settings and don't choose any proxy as advised in your help section.

  Worked fine yesterday. Now it does not work today. As I said google chrome and internet explore works very well.

  Please help as I prefer to use firefox.

  • 1

  Some problems occurs when your Internet security program was set to trust to the
  a previous version of Firefox, but no longer recognizes your updated as version
  level of confidence. Now how do I solve the problem: to allow Firefox to connect to the Internet
  Once again:

  • Make sure your Internet security software is up-to-date (for example, you are using the latest version)
  • Delete Firefox to list your program of trusted or recognized programs, then add it again. For detailed instructions, see Configure the firewall so that Firefox can access the Internet.
  • 2

  Launch Firefox in Mode safe
  
  While you are in safe mode;
  
  Firefox Options > advanced > General.
  
  Find and stop using hardware acceleration.

• The product code is more than a year and will not work. NOBODY HAS USED BEFORE.

  I bought lightroom 4 Amazon for more than a year. I waited until I got my new computer to install now my product code does not work. Adobe has made it impossible to get help. What should I do?

  Finally, someone to go for me and gave me a new code after verifying the old a.

• Gamepad Xbox 360 but not installed projection in the DM and will not work.

  I installed my xbox 360 controller. It has first been installed a few months previously and showed upward in Device Manager. then I disconnected and never used until today (or so I tried)... now it does not show in the SM, but you can hear the dingding when I plug in and when I unplug the unit, but nothing happens and I can't figure out how to get my pc to recognize it again. Please help... my console real xbox 360 should be disabled so that it works, or can I use it with my pc while the console is still? Help

  Hello

  Here are some steps that you can try before you contact the Xbox team.

  Step 1:

  Connect your Xbox 360 to the computer power turn it on and restart the computer to see if it is recognized by your computer.

  Step 2:

  Try to run Windows update on your computer, if there are drivers available, they will be installed and could help recognzing Xbox on your computer.

  Step 3:

  Check to see if you can recognize the device through other USB ports on your computer.

  For more information, see the article below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/finding-drivers-what-to-do-when-your-hardware-wont-work-with-Windows-Vista

  Also post your request in the Xbox forums.

  http://forums.Xbox.com/

  Concerning
  Anthony