Reassign the group identity of endpoint massively in ISE

Similar Questions

• Server process could not be started because the configured identity is incorrect (massive failure Windows 7)

  I had worked in Vista x 64 for more than a year and upgraded to Windows 7 x 64 Ultimate a week ago. IT has worked so far and things suddenly got completely screwed up without obvious reason. I'm into the following loop, where I can't go out:

  1. after booting, two minutes is spent with the message "waiting for Group Policy Client" (normal startup takes less than a minute).

  2. once I enter the password, it passes to another two minutes with "Please wait for the user profile Service...". "(normally, the connection is instant)

  3. I'm connected (I am administrator), but a lot of things is false:

  -Without Aero. Single base type GUI Windows 2000 gray

  -Lack of network

  -A bubble message appears in the status bar:
  Unable to connect to a windows service
  Windows could not connect to the service user profile Service.
  This problem prevents standard users to log on the system...

  -Almost nothing works. Attempts to start to explore causes this error message:
  SOLUTION EXPLORER. EXE
  The server process could not be started because the configured identity is incorrect. Check the user name and password.

  -Try to start the Panel of results in the following dialog box:
  Window title: {26ee0668-a00a-44d7-9371-beb064c98683}
  Message:
  {26ee0668-a00a-44d7-9371-beb064c98683}
  The server process could not be started because the configured identity is incorrect. Check the user name and password.

  -Try to start most of the results of Windows programs in the variation of the above two messages

  -Event log is not functional. I am able to start-> Run-> Services and don't start all services of the event log, but it always says "The event log Service is unavailable".

  4. the things I have already tried and that has NOT worked:

  -System Restore to a point a few days ago when everything worked did not help
  -When you log on under different user accounts (administrator or not administrator), I have the same symptoms.
  -Try to re - install Windows 7 from the DVD fails - it says "source is no longer available...". "or something like that

  That did not help.

  In safe mode, the same problem occurred - cannot do anything and get the same error - "...". configured identity is incorrect... ».
  There is no missing or damaged file.

  in any case, thanks for responding.

  I was hoping that Windows 7 would solve the problems of stability of Vista, but I was wrong - things are even worse.
  It was the last straw - I decided to empty Windows and had Ubuntu Linux.

• Could someone explain Radio button groups and how to identity, the individual borders in the name of the Group?

  I guess that there is a way to declare the name of the Group and then to identify the boxes of individual option within the group that way out put or "choice radio button: text that has been entered and is different from all the other within the same radio button group...»

  If you could point right to a tutorial that can help would be nice...

  Yes, myRadio is the name of the group. To get the correct number, which is determined by the order in which the individual radio buttons have been created (which can be different from their position, ordered on the page), you may need to use a bit of trial and error. The first is number 0 and you would increment from one to refer to the following.

• Residential group number! I can't change the password or leave the group. Convenience store can not solve the prob

  I did a clean install of OS win7 ultimate. If I try to change the PW, it says that windows cannot configure a homegroup on this computer... but still, he said that this computer belongs to a homegroup. If I try to leave the homegroup, it says windows could not remove the computer from the group. Troubleshooting, declare that the Peer Name Resolution Protocol service or peer network identity Manager is not open. If I go in services, it shows that the NIBPM is automatic and the PNRP protocol is manual. If I try to start the PNRP protocol, it is said that windows didn't start the service because of the error code # 0 x 80630801. Peer Networking Grouping also gets error code # 1068.

  Hello

  On the Start Menu, open the control panel and open Folder Options.  Click on the view tab, check the radio button titled "Show hidden files, folders and drives" and out the box "Hide extensions of known file types".  Click on apply to apply these changes.

  Then go to C\Windows\ServiceProfiles\LocalService\AppData\Roaming to Local disk and open the PeerNetworking folder.  Inside, you should see a file called idstore.sst.  Delete this file.  Close this window and return to Folder Options then re - hide hidden files folders and drives and extensions of known file types.

  Restart the PC and let Windows load completely.

  Now, check if the following services appear as shown below, and if they are not, if you can set them up now.

  Peer Networking Grouping this should see the service type as Manual and the service is expected to show that started.

  HomeGroup Provider should show as Manual startup type, and the service should show as started.

  Peer name resolution should see commissioning type as Manual and the service is expected to show that started.

  Peer Networking Identity Manager should display type as Manual startup and service should show as started.

  If they are all able to start, or have already started, see if Homegroup now works properly.

  Kind regards

  DP - K

• Definition of access a single device, from the Group of GANYMEDE

  Hello

  Here's my situation: I have a Lantronix device and two groups of users who need access using Ganymede (ACS 5.6).  I don't want to put all the users in a group because many of the users would then receive access to other restricted devices.

  Basically, I need to combine peripheral access 1 - 10 but Group B only able to access devices 1.

  I've been reviewing the authorization policies, but I'm not clear exactly where to go.  Any help would be grateful.

  Thank you.

  Daniel

  daniel.m.williams1,

  I don't know how the ACS 5.6 Menus have changed compared to 5.4 ACS (us still have but began to abandon to ISE 2.0 for GANYMEDE). But I'll throw my idea anyway and hopefully give you some progress. I'm not familiar with the Lantronix devices but they are configurable with GANYMEDE?

  Here's how I'm going to try to solve this problem in ACS 5.4. Make sure that you also have approriate profile of Shell and the sets of commands in the authorization below rules.

  1. users and identity stores > identity groups > create Group A and B > save.

  2. users and identity stores > internal identity stores > users > create users > when creating users, assign them to their respective membership in step 1 group (Group A and B) > save.

  3. users and identity stores > identity store sequences > create identity store = Local for example > in additional recovery search attribute list, select users > save.

  4 policy elements > Session Conditions > network Conditions > device filters > filter device create Group A = > tab select an IP address then check mark peripheral IP > add the ip address of the devices > filter device create Group B = > tab select an IP address then check device IP > add the ip address of the devices > Submit.

  5. political access > Access Services > create Access Service > identity = Local to step 3 > authorization > customize > add filter device and group identity > click OK > create an authorization rule 1 > select device filter = Group A > select a group identity identity of Group A in step 1 > click OK > create an authorization rule 2 > select device filter = Group B > select a group identity identity of Group B in step 1 > click OK

  HTH

  Please note and mark the correct comment if you find it useful. Thank you *.

• What is the value mentioned in the 'group' in the form of definition list of choices.

  What is the group in the form of definition list of choices. Is this something I need to create a group first and then assign it here or just type a group, it will be created?

  I created a list of choices like below

  

  (2) created a sandbox and a search box with list drop down option in the console of sysadmin. (not as a searchable list of choice).

  (3) created a sanbox in the console of the identity and trying to add a list of value of the ADF, nothing is coming (not able to see the field).

  For this field of type lookup should I select only one ADF option or select one choice, instead of the ADF value entry list?

  

  Please suggest.

  Hello

  On the creation of research of the Group field is just for research or to specify as a result of research belonging to a specific group. For example, you can specify your specific project for all custom research chain, that you created so that in the end, you can recognize your custom research and research OOTB.

  The user interface component is depend on your condition for example if you want dropdown and a single value undergo framework that you can use selectonechoice ADF and ADF LOV alone is different where all values given in different pop up and on the selection of a value of the same value obtained on LOV but I have tested this web composer LOV component and don't forget not there is a problem with this element of the adf. I added outside rather than web composer LOV.

  To try and discover what ADF UI component is adapted to your condition by activating your sandbox and when you finalize the component that only publish your sandbox.

  Kind regards

  Shantanu

• I have 10 devices all under the same identity of apple my partner can see all my contacts, call logs and use of all other web internet devices. How can I change this, to keep my contacts and call log on my phone only?

  I have 10 devices all under the same identity of apple my partner can view all my contacts and call logs and vice versa.

  The device can also see all internet pages use the devices, but mine isn't... How to get our contacts and call the newspapers private their own device and how can I get to keep an eye on web pages using my children? So how do for my phone, the master device / hand who is in control of access for all, because it has my info from apple id and card credit on all devices.

  Stop sharing an ID first. They are not meant to be shared. Then set the sharing of family. Each individual should have their own code.

• Apple Watch: can I receive all messages from whatsapp on my Apple Watch, but not the Group whatsapp messages, don't know why... Help, please. Besides, my watch is custom in Spanish, but only answer messages Whatsapp understands English... someone kn

  I can receive all messages from whatsapp on my Apple Watch, but not the Group whatsapp messages, don't know why... Help, please.

  Besides, my watch is custom in Spanish, but only answer messages Whatsapp understands English... anyone know why? Thanks to you all!

  Hello

  To change the language for a response on your watch: Press answer > firmly press the screen > press on choose language > select Spanish.

• Sent by second Outlook identity received from the main identity

  Hello Mozilla Community,

  I use Thunderbird 31.8 (1:31.8.0 + build1 - 0ubuntu0.14.04.1) on 64-bit Linux Mint 17.2 and I'm trying to set up a second identity for my Outlook account.

  I have two identities configured as an alias in Outlook, and I used both via the web client for a long time. I have the account set up in Thunderbird (IMAP, SMTP) with the main identity works very well.

  Now, I'm trying to configure the alias second in Outlook as identities in Thunderbird just to send email from the identity of the second. I configured the second identity with a name and the same email address that I have as an alias in Outlook, leaving the other default options (because they are ok for me).

  I did several tests, send emails from two identities to a gmail account that I have (and it is also configured in Thunderbird). The main identity works well but the e-mail sent by the second identity is received on the account of gmail from the main identity.

  I looked in the folder "Sent" to the Outlook account (in Thunderbird) and there are 2 emails saved for each test with the second identity: the one that says it's main identity and another who says he is the identity of the second.

  Any help would be appreciated.

  P.S.: I have sought the support of Mozilla and also google about it, without success.

  Outlook identities DO NOT WORK WITH E-MAIL CLIENTS. It's all e-mail clients, just bot Thunderbird

  Initially, I wrote an article in the knowledge base on the subject (which I need to change seriously now, I guess...) Could I interest you in this Toad?)

  No matter what you set up in your e-mail client, Outlook will converted as it passes through the SMTP server of your primary identity. They are unashamedly on the subject and claim it as a kind of safety device. But Microsoft were claiming bugs as features since the mid-1980s

• Move the group between several windows tab

  Is it possible to use the function "Move to the group" from the contextual menu to move a tab from one window in a group of existing tab to a different window?

  By default, Firefox does not show me my groups of a window in the other window.

  Thanks for your help!

  Robert

  guigs2 said

  Use tab groups to organize a large number of tabs is what I have, and that's what I could find in Add ons: https://addons.mozilla.org/en-US/fire.../?src=search
  It seems that currently, it is not a feature of the right click menu in Firefox.

  Thank you. It seems that this feature will never be made the devs plan to remove the feature of Panorama of the heart.

  Bugtracker: https://bugzilla.mozilla.org/show_bug.cgi?id=836758

• How can I put several addressed in a 'group' that I can send using the group name?

  I have an address book and you can send an email to several at once by adding each in hand and the cc or BCC fields. As I often do, I need to 'collect' in a group, so I can use the name of the group to send to several people.

  _ http://KB.mozillazine.org/Thunderbird: _FAQs_:_Create_Mailing_List

• Disable the group messages

  My group of messages has been turned OFF and yet I keep getting responses from people outside the message.  In other words, my mother's iMessage me.  It will look like that just only my mother until I get a text separated from someone else, that she sent the Group message.  Then... My texts do not arise in the form of group messages, but I get RESPONSE of EACH and their.  I end up getting texts from 1 million foreigners and answers to everything from everyone.  How can I stop this? Someone please help - it is becoming so annoying!

  This is because your mother included you in a text for the group. You have no control over this. Separate responses are because they always have you included in the created group your mother. Your mother needs to withdraw from the draft of the group.

• When transferring a message from the sent folder, it does not select the default identity, but one of the others. How to configure it to send to my address

  If I am sending an e mail to my sent folder, the field does not automatically select the default identity but insterad he sends e-mail to e of my daughter and I select the default value in the drop-down list. can it be configured to send the file sent using my default email instead of having to remember to change on the menu drop-down

  Looks like this add-on is more suited to your needs:

  https://addons.Mozilla.org/en-us/Thunderbird/addon/folder-account/

• with Thunderbird, the name of the sender of my yahoo groups no longer put up, but it is rather the name of the Group

  It started on May 11,

  1. go in any position of the Group
  2. on the email itself, right-click on the name of the group in the column 'from '.
  3. click on "edit contact".
  4. click on 'change details '.
  5. make sure that "Always prefer full name on the message header" is checked.
  6 remove the display name, so it's empty.
  7. click on 'OK '.

  That should do it.

• I have a large group of students to the text but I don't want these numbers shared by the group that I can bcc texts?

  What is the community for my question? Students enrolled in a course using their cell #s and I want to text them as a group, but I don't want the numbers shared by the group.

  No ITC in Messages