Reboot the error message

Similar Questions

• Cannot start the computer, the error message "Reboot and Select proper Boot device or Insert Boot Media in selected boot device and press a key any."

  Original title: can't access my BIOS, but blocked on select boot device

  I have a laptop Toshiba Satellite Pro. I gave up some time ago and removed the HARD drive to see if has been affected by the decline, as that was my first thought. "When turned on the laptop back, the error message:" Reboot and select clean boot device or Insert Boot Media in selected boot device and press a key. My HARD drive is installed correctly, that am a qualified technician. The laptop goes directly to this error message, when turned on, so cnnot access to the BIOS. Help, please.

  Hi Ryan,

  Please contact Microsoft Community. I will surely help you this question.

  To better understand the issue, let me know if you have tried pressing the F12 key or the key that is used to start the BIOS on the computer?

  Method 1:

  You may need to press the key (which is used to start-up the BIOS) as soon as you turn on your computer before Windows starts. See the article for more information.

  http://forums.Toshiba.com/T5/Windows-7-knowledge-base/how-to-enter-the-system-BIOS-on-Windows-7-computers/Ta-p/275629

  Method 2:

  If the problem persists, I suggest you to return the item and check if it helps.

  What can I do if my laptop Windows 7 or Windows Vista does not start?
  http://forums.Toshiba.com/T5/computer-troubleshooting/what-can-I-do-if-my-Windows-7-or-Windows-Vista-laptop-won-t/Ta-p/285717

  If the problem persists, I suggest you to contact the Toshiba Support for assistance.

  http://support.Toshiba.com/support/home

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• All of a sudden my 5.7 LR on win10 64-bit start fails with the error message something like "error reading from the cache of the preview... Please restart." reboot, repair, reinstall, or rename SLCache helps to repair.

  All of a sudden my 5.7 LR on win10 64-bit start fails with the error message something like "error reading from the cache of the preview... Please restart." reboot, repair, reinstall, or rename SLCache helps to repair.

  

  Hello

  Greetings!

  Close to Lightroom.
  Navigate to the location where the catalog is present (default value is within the pictures folder lightroom file)

  And delete the file previews.lrdata.

  Note: do not delete the catalog with the extension .lrcat file.

  Concerning

  Jitendra

• I deleted Adobe Reader 11 and rebooted and reinstalled Adobe Reader 11 and I still get the error message "Adobe Reader is blocked because it is outdated". Using Windows XP with the latest updates (SP3).

  
  

  I deleted Adobe Reader 11 and rebooted and reinstalled Adobe Reader 11 and I still get the error message "Adobe Reader is blocked because it is outdated". Using Windows XP with the latest updates (SP3).

  Screenshots attached to e-mail responses will not come back on the forum. You must connect to the forum and post in your topic using the camera icon in the editor.

  Google Chrome is a problem:

  • If you use the clean Chrome PDF Viewer, the results are unpredictable.
  • If you use the Adobe Reader with Chrome plugin, it can reject (block) If this isn't the latest version.  11.0.08 drive is the latest version for Windows XP, but Chrome can insist on the current version 11.0.10.

  My suggestion; Use a different browser!

• Satellite Pro M10 will not start again and comes up with the error message

  My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
  The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

  What can I do to get the notbook again reboot?

  Hello

  Seems that there are problems with the files of GoBack.

  Try to boot in safe mode and remove the Norton System works from your laptop ;)
  If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

  Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

  Good luck

• Satellite Pro L series starts with the error message

  Someone played with the BIOS or whatever on my laptop.

  Now, I can't get beyond the log in screen safe mode (black and white) and the error message that oxoooooo7b OXF7A8E63C OXC0000034 rises.

  I can not find discs to reboot or something else and don't know what to do to solve the problem.

  Any help will be most appreciated, because I'm really at a loss for what to do for the best, that I don't know much about computers as of how put the right problems like this.

  Hello

  You can try to repair the system.
  Switch on and press F8,
  Now, you will see the advanced boot options:
  Here you can choose the option: last known good configuration

  If this option does not help, restart the device and press F8 again.
  Choose the first option: fix my computer
  Here, you can choose between different options.
  You can enable Win 7 to find the problems and fix automatically or you will use the Toshiba HDD recovery option to restore the entire system.

• HP Pavilion a1220n starts cold start, but gets the error message to "restart".

  Restart in function, the error message: "reboot and select proper boot service or insert boot media in selected boot device and press a key.

  One way to start is to power down then upward.  Windows will load.  What is the problem with the hot start?

  Running WIN 7 Home Premium 64-bit.

  Any suggestion is appreciated.

  Hello

  Disconnect all USB devices except the keyboard and mouse.  Don't forget that the CD drive is empty.

  Try to clear the CMOS memory.

  Looks like your PC is trying to boot from LAN.  If this is the case then to clear the CMOS will change all the parameters of the bios to the default values.

• Cannot install Windows update, the error message "" Windows update canoe currently check for updates, because the service is not running ".

  Initial version of updated title: windows

  My "Windows update" is not updated. The problem started recently and its shows the error message "Windows update canoe currently check for updates, because the service is not running. You may have to restart your computer "." I tried it with several reboots, but there still is not up to date. Kindly help.

  Hello

  Have you made changes on the computer before this problem?

  Method 1:

   

  Troubleshoot problems with installing updates.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  Try the procedure described in the following article and check the status of the issue.

  http://support.Microsoft.com/kb/822798

  Restart the computer and check it please for windows update.

  Hope the above information is helpful.

• Unable to connect to the Windows Vista profile, receive the error message "logonui.exe - bad image".

  Original title: bad image Logonui.exe

  I have laptop Dell XPS M1530.  Last night when I tried to start the computer, it went through the movements until he got to the login screen.  Rather than get the profile to connect to, I got the error message following "logonui.exe - bad image.  C:\windows\winsxs\x86...\COMCTL32.dll is not designed to run on Windows or it contains an error. "When I click ok on the error message and wait for an another error message appears" logon.scr bad image. "  I tried to run the Startup Repair and restoration of the system without result.  I cannot lose the files on the hard drive, but have run out of ideas and options on how to solve this problem.  Someone at - he had this problem and managed to fix it?  I've exhausted the System Support of Dell, as they have failed to: "format the drive and restore to original state."  That is not an option right now.

  I went into the Commpand prompt and delete files that have been raised as errors.  When I rebooted, it came in fine.  I got the files I needd for backup and then rebuilt the system.

• I downloaded for brother's keeper genealogy software and got the error message comdlg32.ocx is not properly registered a file is missing or invalid

  I tried the following:

  -J' downloaded comdlg32.ocx from a source linked and registered successfully in c:\windows\system32. Restarted. Tried to open the program and got the same error message.

  -Uninstalled program. Downloaded again with mozilla set to run as administrator, rebooted, got the same error.

  -Recorded in system32 times Comdlg32.ocx and the folder of the program in c:\program files, set to run as administrator, program can always put the error message.

  -Tried to set the compatibility to Windows XP program, get the same error.

  -Tried to set compatibility to run as administrator.

  The program will run in Mode without failure. I'm just an average user and I'm frustrated to the point of tears. Can you please help? Thank you.

  Thank you very much for the help.  I solved the problem by uninstalling the software and then create an admin login.  I logged in as admin and downloaded the software, installed, then it worked fine.

• Smartphones from blackBerry Desktop Manager "disconnected" and I cannot get rid of the error message

  I just bought a Blackberry Curve 8530, running v5 software, my computer is Windows 7. I installed the 501_b073_multilanguage software that I downloaded from the site Web of Blackberry. When I run the Desktop Manager I get this message: "Before you start, check that your current BlackBerry device is connected to your computer." Troubleshooting functions I've seen on this forum: many tips (ones I've tried is below). One in particular, that I can't do is "Office Manager shows"off". ".
  -Make sure that the user has entered in the Desktop Manager and select options > connection settings > detect. »

  ... because I can't get rid of the error message dialoge box, and I can't click on the menu options in the BB Desktop Manager.

  I tried the following:

  • uninstalled and reinstalled twice - 2nd uninstall was a "hard" uninstall where I deleted the registry files by hand
  • installs the cable to the USB port at the back (after having tried both ports at the front) of the computer
  • rebooted the computer several times
  • hard starts the phone by removing the battery
  • plugged in, removed and replugged in the phone.

  Also:

  • The phone is properly install when I plug it in, but the software still does not seem to see it.
  • In Device Manager, the BlackBerry appears under portable devices. Double clicking on it gives me the message "this device is working properly." of reassurring.
  • The Com1 port is working properly, according to Device Manager.
  • A double-click on the icon of the Device Manager to get the properties indicates that the Com1 port is "disconnected" - when I try to set it up, it appears just back to the disconnected state.

  If someone has an idea or something that I have not tried, I'd be happy of course!

  Thank you!

  K

  

  

  Good, people, after a phone call from 3 1/2 hour with a (very patient) phone support person to Blackberry, here's what I learned.

  You can check your drivers USB in this way:

  1. Plug your phone into your USB key. Assuming that your Blackberry is "seen" by your computer...
  2. Go into the Device Manager on your computer (Panel)
  3. Expand the Universal Serial Bus controllers at the bottom of the list item
  4. Right-click on the BlackBerry smartphone, and then select Properties
  5. Click on the driver tab
  6. Click the driver Details button
  7. You should see a driver. I saw two. The one like the BlackBerry is the RimUsb one.

  So here's what NOT to do: we threw any driver who has been the "extra". This actually made using my mouse and keyboard cannot, because they are USB and my poor husband has sent in the basement to find a million-year-old keyboard (and mouse) with the old fashioned type of connectors (PS2). Bleh. Don't, don't.

  Here's what I did that worked (not saything this will work for you - it changes the registry to a backup system with this backup and restore if you are nervous about this kind of thing):

  1. On the start menu, choose run and type regedit into the registry editor.
  2. Follow this path to the file: HKEY_LOCAL_MACHINE, SYSTEM, CurrentControlSet, Control, computer, class
  3. Click: {36FCE60-C465-11CF-8056-4445535400000}
  4. If there is an article called law "UpperFilters", delete it. (See photos)

  Hope this helps someone.

  Karin

  First photo: Watch 'before '.

  

  Second picture: displays the full path of the file and 'after '.

  

• Display driver hangs on the computer and the error message "display driver NVIDIA Windows Kernel Mode Driver Version 306.97 has stopped working and recovered."

  Original title: NVIDIA Windows Kernel Mode Driver Version 306.97 display driver has stopped working and recovered.

  Hiya,

  I have recently installed Windows 8 Pro, installed all of my usual applications etc..
  The problem I've encountered is maintaining display driver crashing. Or have waiting periods. The exact error message reads;
  "Display driver NVIDIA Windows Kernel Mode Driver Version 306.97 has stopped working and recovered."
  Until now it expires randomly even when the computer is idle, and more frequently when I watch videos online. Also, watch a clip full screen on some sites like YouTube is ok, but on others, it is very laggy (updated maybe once per second the image) and the sound is out of sync.
  I can't find a way to properly uninstall the graphics driver.

  At least yours is working semi... I have the GTS 450 (uses the same drivers) and the mine does not at all... Stuck with the regular game pilot integrated ATM and can not all games... Microsoft told me to wait a few weeks and for the reminder and Nvida said 10 ways to uninstall and reinstall the drivers for same. Hope someone with to get a fix for this soon.

  Hi guys,.
  Looks like this isn't just me.
  Just an update, that I can not confirm it as a solution, but I have not encountered any problem (a little screenlag aside) since the installation of the drivers beta. For me, the beta version of the driver is 310.33, R130. The only other change to my system updates Adobe Flash version packaged with Google Chrome to 11.4.31X to 11.4.402 to eliminate serious problems when you watch the video in full screen.
  Information system;
  Operating system: Windows 8 Build Pro with Media Center 64-bit, 9200
  CPU: AMD FX-8150 eight physical cores
  GPU: ASUS NVIDIA GeForce GTX 560 TI
  Main hard drive: OCZ Vertex 3 120 GB
  It may be useful
  Edit: Still not falling down, 11/02/12, 4 days
  
  
  New edition;
  
  
  If you still receive the error message, try the following steps;
  Has. try to perform a clean installation of the driver.
  Download the latest drivers for your graphics card. Run the downloaded file, and select "Custom Installation". In the next screen, you will see a checkbox or similar labeled "Clean Install".
       
  
  You can do so by visiting nVidia Driver Downloads (www.nvidia.com/Drivers). Automatically detect the right driver or download using the form. The best way in my opinion is to use the GeForce experience, who will do anything for you in two clicks and a reboot.
  B. close all other programs
  It is possible that the error was caused by too many programs that need to use the resources provided by the graphics card/chip. It is also possible that a certain program caused a conflict that pilots crashed.
  You can try closing some currently open programs one by one and see if the error persists, or restart your system with disabled startup programs and allow them one by one to find the culprit. If the error is too persistent to do the above, it would be easier to start in safe mode option.
  More information can be found below
  http://support.Microsoft.com/kb/2665946/en-us

• My computer randomly gave me a blue screen, the error message "DRIVER IRQL NOT LESS OR EQUAL (Wdf01000.sys).

  Original title: driver error

  They just showed me an error on my computer. I am currently running Windows 8. I was in the middle of games on Steam and my computer randomly gave me a blue screen. He told me that "DRIVER IRQL NOT LESS OR EQUAL (Wdf01000.sys). It restarted and now I'm on that's fine, but I was wondering if there is anything I can do to prevent and what should I do to remove if it's going to be a recurring problem. Thank you.

  Here is a list of the help page instructions:
  «' ' ' Exact error message: DRIVER IRQL NOT LESS OR EQUAL (Wdf01000.sys)»»» "
  -Your program and Version: don't know what to put here.
  -Your operating system and Version Windows 8
  -Your browser and the Version of Google Chrome Version 28.0.1500.72 m
  -All soft/hardware you have recently installed or removed - None.
  -Any recent changes that have been made to the system - None.
  -What you did to solve the problem of Google there as the error message recommended, read a few results, thought I would ask here.
  Specification of the computer if necessary:
  HP - Sleekbook 15.6 ENVY "
  AMD - processor A10
  -DDR3 SDRAM
  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  
  

  WE NEED AT LEAST TWO FILES DMP TO SPOT TRENDS AND TO CONFIRM THE DIAGNOSIS.

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  If you are overclocking stop.  (chances are if you are unsure if you are, you are not) a

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.

  * Zip up the copy (compress)

  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

  Link to find out how to download below.

  http://www.WikiHow.com/use-SkyDrive

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.

  * On the Advanced tab, click Startup and recovery... Settings button.

  * Make sure that automatically restart is unchecked.

  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).

  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.

  * OK your way out.

  * Reboot if changes have been made.

  Please also run MSinfo32 and download the output as well.

  To run MSinfo32 please go to start > run > MSinfo32

  Go to 'file', 'save' and download the PDF is saved with the DMP

  System specs are extremely useful then please include everything you know.
  
  
  Blue screen view and that crashed are often wrong and should only be used in case of emergency...
  
  
  You can learn more about BSOD here
  
  
  
  
  Team Zigzag3143.com  

• Can someone help me with the error message "Creative Cloud Files folder missing"?

  Hello

  I'm on a Mac (OS X 10.10.1) and recently changed the folder name 'users' of my system to something else. I think that I followed all the steps correctly Apple to make sure that my user account name and the directory of the user are in alignment after the change. However, the creative cloud do not update the extension / address of the location to sync files. I went into the preferences of creative Cloud and saw the location of the file ' ' was still announcing the former name for the folder my Mac user. I used the dropdown to select 'Other' and then selected the folder of the newly appointed user. Creative application Cloud then began loading (presumably to restore the sync connection), but then gave me the same error again. When I return in Cloud creative preferences, the location of the file ' ' now shows the newly named good, user folder, but I still get the same error message every time I try to turn on sync. Even with the correct file shown as the 'file location', the error message always refers to the old extension / address of the location of the file.

  How can I get Creative cloud to update the address of the file? He seems to have accepted my change the 'location', but the address of the file itself has not been updated.

  FYI: clicking 'Restore' option does not at all help. It produces just the same pop-up over and over again until I got disabling sync.

  UPDATE: I restarted my computer and went through the same exact process above and now looks be it resolved itself. the error message no longer appears after that I have turn on sync. In my opinion, everything works fine now. Basically, it seems that the solution is to completely reboot your computer.

• Get the error message when you try to launch the 64-bit CC bridge.

  Get the error message when you try to launch Bridge from Photoshop CC 64 bit.  "Cannot complete order because the extension cannot be loaded."  Need of difficulty.  Thank you.

  Hey Adobe Bubba,

  Please uninstall the software, run the cleanup tool, reboot your machine and install again.

  Cleaning tool: http://www.adobe.com/support/contact/cscleanertool.html .

  Kind regards

  Romt Sinha