Reboots of loop switch

Similar Questions

• reboot/restart loop without end after installation

  Firefox suggested the update of the United Nations, I said okay and got the Firefox Setup 8.0 file in my downloads (details: data of version 4.42.0.0 of Firefox Mozilla file 2011-11-14 to 21:26 size 14.0 MB).
  I ran it and the Installer seems to go ok after she asked the PC must be restarted.
  After the reboot it says
  "Your computer must be restarted to complete previous update of Firefox. Do you want to restart now? Yes/No ".
  When I reboot I'm just back in the same question that is an endless loop.
  The 'funny', is that if I try to uninstall Firefox I'll meet the same question, otherwise said, I can not even uninstall + reinstall Firefox in order to circumwent the problm.
  What should I do? I want to continue to use Firefox, but have now been forced to use a poor competitor.

  Hello

  Please try the solution proposed by "cor - el' here:
  https://support.Mozilla.com/en-us/questions/896337

  I hope it will work for you.

• ACL lost after reboot of the switch

  I have a Dell PowerConnect 5448. I created an acl using the CLI. I have telnet'ed in the switch and created and ACLs on port 19. This works well. He does his job and even after that I reload the switch (or the loss of power of the switch), the acl on the 19 port is never lost.

  I now copy the same acl using the graphical interface, using a web browser - Dell OpenManage Switch Administrator for different ports. For example, I click on Switch - network - links ACL security. I can see the acl on port 19 I created using the cli interface. I use the web gui to copy this acl in a lot of different ports. "bind acl at interface" other ports on the switch. I save the changes. But, after I restart the switch (or lose power to the switch), these "copied" ACLs are lost. I still have the original acl I have created using the CLI, but lost the ones I copied to other ports by using the GUI.

  Is this a normal behavior to lose these 'copied acl"using the web gui?

  I never lose the acl that I created using the CLI, but after a loss to reboot or power, I always lose the acl that I copied using the web gui. Why? Am I missing a step?

  Thanks in advance for any advice or suggestions!

  By clicking on apply changes is just going to implement changes to the running configuration. To save the changes so that they remain after a reboot, the running configuration must be copied to the startup configuration.

  

  See you soon.

• Questions post 1.3.5: problem of Installation of App - required reboot (endless loop)

  OK, so I've updated to 1.3.5 and which went well.  The problem is that I can't install ALL applications in the App Catalog.  Whenever I try to install something the installation fails and I get a message "Reboot required" to which I replied 'YES' and the device reboots (looks like a reboot of the luna, not a full reboot).  However, still impossible to install anything because I get the same message.

  Anyone else seeing this?  I'm trying a full restart now (still in progress as of this post).

  Given partial reset did the trick

• HA considers himself isolated on a reboot of the switch

  Hello

  I've implemented a vSphere infrastructure (more Essentials, 3 guests, 2 LAN switches, iSCSI 2 switches) and we do testing of redundancy.

  Everything works fine, except when restart us a LAN switch: each host considered himself isolated and closed its virtual machines.

  Note that the problem occurs when the switch starts, not when her stockings.

  I activated the beacon probe on each vSwitch and tested again. This time, only ESXi initiated a failover. But it should not happen at all.

  My guess is that when the switch boots, all interfaces go up and down 3 times and there is a change in the network topology. But I can't understand why ESXi considers himself isolated when he has half of its interfaces running.

  Any idea is welcome.

  Kind regards

  Article KB http://kb.vmware.com/kb/1006421 explains the different settings.

  You can also read http://www.yellow-bricks.com/2008/10/27/ha-best-practices/

  Also these settings make sure that you have correctly configured the physical switch port. for example the spanning tree portfast

  André

• Help! HP Envy 100 stuck in endless reset / reboot loop

  My new printer Envy 100 has suddenly been unusable by getting himself stuck in endless reboot / reset loop.

  He started the other day. A message appeared on the touch screen of the printer asking me if I wanted to update the software. As everything works fine to this day, I clicked No. which seemed to he left.

  It restarts, goes through the motions, then as soon as the main home page appears, it turns black again and goes through all of this again and again and again...

  In one of the rare moments where I managed to access the settings before it turns off again, I have established that it * is * running the most up software to date.

  Anyway, I unplugged and back of left unplugged for a few days, and as soon as I plugged the in... He started and cannot be stopped.

  I'm on Mac OS X 10.6.8. No error message appears anywhere, it just gets stuck in this loop reset, without saying why.

  I hope someone can help - I can't use the printer at all.

  Thank you

  Giles

  OK, the solution came in the form of an update of the HP software. As HP offered to replace the item, a new update appeared for most HP printers, and I installed it on the computer. Check on the printer now revealed a new update here as well, so I thought that it is prudent to do both.

  Since then, this problem has disappeared.

  G

• Cannot restart after optional updates from Microsoft. Down arrows don't work when in the loop boot selection page

  Went to Microsoft Update and downloaded and installed a few optional upgrades, including one about a driver. After installation, will not restart. Arrive at the page Windows XP will then black screen and then the boot selection list. Is "glued" to the normal startup and arrows don't work for go mode without failure or any other option. He just times down, try to reboot and loop. Help!

  Hello

  Have updates you installed?

  You can check the KB number for the update in the update history:

  1. Click Start, click all programs, and then click Windows Update or Microsoft Update.
  2. on the Windows Update Web site or the Microsoft Update Web site, click on view update history.

  Step 1: Unplug the power cable, the keyboard and mouse and then reconnect it back. Now, check if you're able to boot in safe mode (by using the arrow keys) or normal mode. Send back the same.

  Step 2: Alternatively, you can restore the system from the recovery console.

  Reference:
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

• How Reboot/restart Dell Powerconnect 6224

  Hello

  My company has 2 powerconnect 6224, 1 is the master and 1 slave, do I know how could restart/reboot my switch in the GUI?

  Can I use the cli to restart/reboot command and what is the command line.

  Thank you

  Using the CLI to recharge the battery, you must use the # reload command. You can add the number of the switch in the command reload members of chimneys. charge # 1, # reload 2.

  You can also use the command console (config-battery) #initiate failover. This command forces a warm restart of the battery. The unit of backup succeeds the new management unit without clear status of material on the stack members. The original management unit restarts.

  In the graphical user interface, you can reboot the switch with entering the system > general > reset. You can also start a recovery using System > stacking > NSF summary. Initiate failover will begin a warm reboot of the switch.

• SGE2000P loses the manually configured ipv4 address after reboot

  I am setting up a new switch SGE2000P as independent. As part of the Setup, I need to assign a new IPV4 address to the switch default instead a 192.168.1.254. After that I applied the changes everything works fine, but when the reboot of the switch get the ip address back to the default. Any contributions to this issue will be appreciated.

  Elkins

  Hello Evillalona,

  I just looked at the issue you are seen and wanted to check with you on this subject.

  When you change the settings in the switch then go to the file management section

  the switch and make a copy of the running configuration to the startup configuration? I just wanted to

  check and see if that would fix the problem you are experiencing. I've heard other people with

  the same problem and that was the difficulty for them.

  Thank you

• How to cause a loop to move to the next item in the loop?

  How to cause a loop to move to the next item in the loop? cfbreak leaves whole loop I want

  < cfloop condition = 'i' less THAN or EQUAL to #ArrayLen (arrData) # >
  
  <!-we need filter so the uplaod problem lines does not crash '->
  < cfif not REFind ("^ [0-2] [0-9] [/] [0-1] [0-2] [/] [1-2] [0-9]" {3} $", arrData [i] [1]") > <! - treat date - >
  loop jump the agenda (IE i ++)
  < / cfif >

  Thank you

  does not the loop move on to the next item in the loop, it mearly incraments var I.

  is actually the loop switch the order of the day. It's inevitable, because I is the loop index.

  In any case, as others have suggested, you can skip the history quite i. Just follow your instinct and code it directly as you feel.

  I want to check each line but if there is a mistake in any column in the same row I want to ignore the whole line

• Lightning Calendar continues endangered

  Lightning Calendar disappears after updates. Don't know if it's just the updates Thunderbird, lightning updates or both, but it often disappears and won't let me reinstall. The icon disappears. When I look into addons, it is not displayed. When I try to add, I get a message that will be enabled when you restart. When I restart, I get the same message and it is not installed. Just gets stuck in this reboot message loop.

  I tried following the instructions in a number of positions to cancel the uninstall, delete profile folders and nothing works. The only thing that seems to work is to remove the calendar information, using something like Mozbackup to save my profile and reinstall Thunderbird. Gets the time some.

  Windows 7 and Thunderbird 38.3. It has happened since early August 2015.

  Thanks for any help.

  Don't know if this solves the problem, but I survived an update by lightning. First saved everything with MozBackup. Completely uninstalled Thunderbird. Reinstalled thunderbird in safe mode and restored profile. Update survived and keep your fingers crossed

• iPad Pro wifi disconnects often, using ios9.3.1

  I just bought this amazing iPad 12.9 ", my home network through TWC, never have problems with the two adolescent, wif, TV with wifi at the same time. Now it's after hours, and my wifi disconnects on a regular basis. Any thought beyond reboot and wifi switching power to re-establish the connection. Y at - it an idle wifi setting that I missed? Thank you

  Hello...

  Follow the instructions here > to connect to the Wi-Fi on your iPad, iPhone or iPod touch

• Portege R700 - 3G wirless internet 'off '.

  I travel a lot with my R700 laptop and use the high device mobile broadband 3G almost everyday of the week.

  However, the mobile broadband has suddenly stopped working, and the Wireless Manager application reports that it is turned off. (It is not!)
  I also note that the blue light that indicates a signal mobile broadband is no longer present.

  I tried all the usual stuff such as a reboot, the wireless switching on and off the power, etc.
  I also checked in the Device Manager, where it is reported as an Ericson FG3607gw adapter and is supposed to work correctly.

  Someone at - he of the clues as to what went wrong?
  I think that it may just have failed due to old age. (The laptop is five years).

  Wide device is available as a spare mobile bandwidth, and it is easy to change.

  (I use Windows 8 x 64 and installed the latest driver Ericson there are a few butterflies.) The BIOS is also updated.)

  However, the mobile broadband has suddenly stopped working, and the Wireless Manager application reports that it is turned off. (It is not!)
  I also note that the blue light that indicates a signal mobile broadband is no longer present.

  If the led does not 'blue' light the 3G module is not IT.
  It would be interesting to know why you are sure that the 3G module has been activated 100%.

  I also checked in the Device Manager, where it is reported as an Ericson FG3607gw adapter and is supposed to work correctly.

  In Device Manager, you will see the devices that are recognized by the system... but this does not mean that the module feature (i.e. WiFi or 3G) is activated...

  However, I think that you should first try to reinstall the drivers.
  First uninstall the driver 3G since the Device Manager...

  There is also a control utility power of RF G 3 for Win 7. The '3 G RF Power Control Utility' active your 3G to start... this software is not available for Win 8 / Win 8.1 but check if you could install the version releaed for Win 7.

  In any case, a newer driver of Ericson G 3 was released for Portege R930 series.
  Check if you get the 3G enabled using this new version of the driver.

• ProSafe GSM7224r cannot access via IP or series

  Hi all

  First post, so go easy.

  I bought what turned out be two GSM7224r switch to a local auction house (listed as a batch). Both powered and have had my machine 'see' the two (after manually configuring the NETWORK card with an address of 169.254.100.0/24) then understood they must work...

  You have their home and could not connect. Have you tried resettting (via the reset button). Both switches turns on, but the power light on each flashes (as if the device is post-ing), but never goes beyond that.

  I can manually configure a connection of NIC devices to manage what should be the default settings - 169.254.100.0/24 address, but can't ping or connect to what must be the address of the default switch - 169.254.100.100. I also connected a null-modem cable to the device (settings 9600 baud, 8, 1, none, none), but this also does not connect.

  Given that the two devices are showing the same behavior, my guess is that something has been done for them when be disinfected (they came out a Dept. of Govt.), and that they should now be reset to the factory settings. Question is, how can I if by pressing the reset button does not work? (FWIW, I tried a 30-30-30 don't reset on one of them yesterday - no change).

  I am quite stuck, so if anyone has any ideas on how to get connectivity to these switches, I would appreciate it a lot.

  Thanks in advance.

  Last updated:

  I was able to successfully flash the two switches with a more recent firmware and now both will correctly start / can be managed.

  I have stunbled this guide https://community.spiceworks.com/how_to/2923-what-to-do-when-my-managed-switch-does-not-boot, who has been very helpful.

  A point to note is that I could not switch to save settings when I tried to 'up' default baud rate 9600 to, say 38400. I would like to configure the switch (via the partially damaged start menu, option 2, I think) and then disconnect / reconfigure hyperterminal to match these settings, but when I tried to log in again, it wouldn't connect. Reboot of the switch "reset" on the speed of 9600 baud by default. This meant that it flashes with 6-7 MB of firmware has had a reasonable period - ~3.5 hours. Something to keep in mind.

  I hope that someone else might find this useful if they acquire similar switches that have been sanitized over-zeaously, and they don't know where to start.

• 9 of LabVIEW with GPIB-RS232 for shutter at fixed intervals of time control

  Hello

  I want to order my pane using LabView. I have a program for that from where I can see this shutter is controlled. But I don't know how can I integrate this conditional opening and closing the shutter. For example, I want to shutter to be close for first "t1" dry and open for the next dry "t2" and again close to the "t1" and he repeated that if arrested. "."

  I am attaching the file also, can someone explain to me how I can do?

  Thank you and best regards.

  Hello

  What you need is two tables with in the first and in the second time, downtime.

  Then in a for loop switch, element of waiting on, turn off wait element.

  Use autoindexing and make sure that the two arrays have the same length in the case against the shorter table will determine the final stages.