Rebuilt again drive with the original image, goes into infinite boot loop
Hello
the recovery partition to reinstall vista operating system failure, not a disk failure lasts
a disk failure hard it is why the computer manufacturer would recommend to make recovery disks
I told you what to do
If you are not satisfied with my advice:
as you have problems with the process of recovery of manufacturers, contact the manufacturer
It's their recovery process not microsofts
Tags: Windows
Similar Questions
-
Pavilion dv6-2162nr laptop: install the new hard drive with the system image
I have a hp laptop dv6-2162nr win 7 I am about to install a new hdd Seagate, I have the repair disk and recovery disks that I made at the outset after purchase. I also updated backup files and file system image. I want to recover my file system registered... at what time; using the recovery discs, the new Seagate hdd will be ready to get a picture of systems?
BobO2
Recovery disks do not use the Image you did install Windows and all software/drivers hard disk from the factory original.
You would start with repair cd to restore the Image.
http://www.howtogeek.com/HOWTO/7702/restoring-Windows-7-from-an-image-backup/
-
Hello
One of my largest clients use a PS6010XV storage in production for 3 years. It is equipped with 8 disks SAS 600 GB drive HARD 15'000 rpm and shortly it will be out of space. He ask me full fill the table with hard 16 600 GB.
My sales representative Dell told me that this kind of upgrade is not possible, the 600GB 15,000 rpm SAS drives is not available...
My client is very upset by this situation and I'm trying to find another solution.
Is it possible fill completes the picture with the original disc Seagate Cheetah 15K 3.5 "600 GB SAS 6 GB/s 24 x 7, type ST3600057SS instead of the original Dell disks?
I can see the Dell drive (P/N 0944832 - 01) are Seagate brand and type is exactly the same.
Kind eyes and waiting for your response
Christophe
Hello
No, because it is custom firmware on the brand of Dell disks. The EQL firmware will be search and reject non Dell/EQL brand discs. Do not add any disk brand would also void the warranty.
Kind regards
-
Hello!
A question about DNG. recently, I had to put a bunch of my RAWs to print elsewhere. I copied all the RAWs and XMP files. Then imported on a different PC/LR. Others do not, some reflect my edit-adjustments. RAWS all VINTAGE.
I save now on some DNG of my final print changes.
I'm thinking a DNG in PDF format.
When I export a DNG a RAW processed, is it cooked in? or is it always the original image with the settings of self-development?
Thank you
Alex
Lightroom is a non-destructive Editor. So, you can take any file type (JPG, DNG, RAW, TIF, other) and edit this photo, and always come back to the unedited version.
If you export your RAW as DNG or export your RAW as the 'Original', you can also revert to the unedited export version (but not if you export as JPG or TIF).
With regard to your initial statement that you have 'copied the RAWs to print elsewhere', they may not had the changes written to XMP. It would also be a problem with the DNG format, as I said, you should enable the option to write changes into XMP or issue a command, because by default, Lightroom writes not changes to your DNG or sidecar xmp for the RAWs files.
The copy is different from export.
-
12 elements how to duplicate an image on the screen (as well as the photo tray) so that I can compare any edition with the original?
- In the full Editor, go to Edition > Preferences > general and check "enable floating Documents in full Edit Mode".
- Open the image so that you can see in the project bin
- Right-click in the thumbnail of the image in the project bin and doubles. It will come as a xxxcopy
- On the icon to reorganize at the top, select 2-top. You should see the original and the duplicate in the work area
-
I just opened the photo and every pixel in it became white. There is no way to return to a previous version of the image, as if she had initially being that color. The size of the image remains the same, but each pixel is white.
This is the second time that's happened, but the previous one, I was able to recover the deleted original file on my SD card, which is not an option at this time.
I would like to know if there is an app or option on Preview that allows me to recover the original image.
back-
-
Recovery Manager cannot restore computer using the original image
Hello
I'm working on a Pavilion P6000 desktop series (WW639AA). Windows 7 (64 bit) does not load as it seems that his score is corrupt. I ordered a new restore disc (and additional floppy) HP to restore the hard disk. I tested the hard drive and all past. However, when I run the Recovery Manager and try to restore the computer, I get the following error:
«Recovery Manager cannot restore you computer using the original image.» Contact HP support. ' Error #0xe0ef000e.
All of the suggestions.
Thank you.
blewettjl,
A disk that has been 'cleaned' will have this error with HP rated DVD.
HP has a patch, called CyberLink Recovery disk utility: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-80183-1&cc=us&lc=en&dlc=en
-
Hi, I put a video together for my MOM to 70th and one of her friends has provided a video clip of her playing a classical piece on the piano for several minutes. I would like to cover this clip with other video sequences (landscapes, etc.) whereas the way piano since the main video track in the background.
I tried to let fall the piano video file directly in the audio editing panel and then cut a second 20 segment in the video editing and insert a 20 second video (mute) images of landscape. However, the piano audio from the first video stops as soon as the strike chronology inserted piece landscape and picks up again when it ends, even if the audio scenario shows the audio piano continuously? Am I missing a step or is this not possible? Thank you very much.It should work quite as much as you described in Windows Movie Maker 6.0 (WMM 6.0), then maybe there is a step that is missed. Let me describe how I could do and see if there's something you overlooked.
First of all, I assume that you have already imported the clip of piano and your other clips of landscape in your collection then you can drag the there where necessary. First, drag the piano music to the track Audio / Music in the timeline panel. Note that if you have your video extended timeline, it will show video, Transition & Audio, but you want to get off- below that, to the Audio / Music , to follow. At this point if you play your 'film', you should not to see any picture but just to hear the sound of the piano. You should also only see a waveform on the audio / music.
Now you can put anything you want on the video track. Let's start by putting another copy of the original video of piano, but this time on the video track. If you have developed the video track (to see the Vidéo/Audio/Transition) you will see the video piano and its associated audio waveform. However, in your case, since you already have the audio separated, you want to cut that his partner. Right-click on the Audio (attached to the video) track and select Muteor use the menus (Clip > Audio > Mute).
When you preview the project, you have synchronized video browsing with the original copy of the audio piano. At the point in the video where you want to replace the video with another piano play, making a split (key M). Make another split at the end of the section. It is very import that select you the video track when you add new divisions and you have not also be divide the track Audio / Music .
Important: You want to make sure this divide the part that has the exact duration as well as landscape images, you want to replace. So if you have 20 seconds to add, you divide 20 seconds piano images.
Right-click on the part of piano footage (video track) and choose Remove. Then, insert the part of sequences of landscape (also on the video track) in its place. Once again, you will have need put this added sequence muted landscape (Clip > Audio > Mute).
You should now see and hear the piano play. Without any change in the audio playback in the preview window should implement the landscape images, then returns to piano images.
If you find that your project is not behaving correctly after these splits, but are you sure that you have followed these steps, it could be a problem with your video file types. If in doubt, try to convert all your videos to .wmv format using something like Freemake Video Converter (freemake.com)
In any case, I hope that you are able to achieve, because it is certainly possible. Good luck and post back with further questions or information, you can have.
-
Hello
I copied a file from the shared network folder and it is really important document, so I need to use this file as a file off the local drive connection and backup as well just in case where the cause accidental, but I don't want to save it each time and don't want to use the original file in the network.
Is it possible to automatically synchronize the copied file in the local folder with the original file in the network?
Thank you
Absolutely without interruption would require a program to write that monitors files on the file locks and triggers a sync as soon as he sees a change. So, since we cannot just write a program, the best thing is either:
(1) an icon on your desktop that you can click each time you want to synchronize "synchronize my files now.
or
(2) plan the "my sync files' to run automatically every x minutes. It could be a batch script that checks to see if the file is more recent and copies only files that have changed. Although perhaps a little aggressive, you could plan this thing check-and-copy-a batch file - again to run every 60 seconds.
Batch files allow you to control the operations very directly, but Microsoft has also made a (not supported) tool called SyncToy who does all the same things, but has a graphical interface to select your options. It can be programmed to run automatically on a schedule.
-
3.6 LR is more external changes with the original stacking.
I don't know if it's the result of a recent update, but when I send a file to the PS to edit and save, it not is therefore more superimposed with the original RAW file.
Previously, I would hit CMD + E, a tiff file would open in PS and after saving the new file itnthe appears in LR, stacked with the original. This is not the case more and I can't understand why.
Any ideas?
Yes, it is a small annoyance in LR3. LR3 remembers the photos has changed since the last edition of the battery or not a non-Raw photo as a copy. When you edit a Raw, it uses the last used choice.
The solution is to select an arbitrary non - Raw (JPEG, TIFF) photo and choose «Edit in PS...» ». When the dialog box appears, set the option of stacking downstairs as you like (in your case: activate) and simply dismiss the dialog without actually loading a copy in PS - LR will remember the setting you did. The next time you edit a raw in PS, who remembered setting will take effect (so the new image is superimposed with the original Raw once again in your case).
P.S. in LR4, this has been fixed: the decision whether or not the battery is more made in the dialog box "Edit in..." for no-Raws, but is a fixed configuration in the preferences that apply to the Raws and no-Raws. See also here: http://feedback.photoshop.com/photoshop_family/topics/lightroom_raw_edit_in_photoshop_make _the_stack_with_original_option_available (the issue has been resolved differently from what I proposed, probably because that "Edit in PS...) (' is supposed never to show the dialogs for the Raws, so it was resolved as a preferences option instead).
-
Re-import L/r &; battery with the original file?
Re-L/r & battery with the original file import
Hi, need some help please.
After have exported them to an external editor for re - I want to import the image in lightroom, when I click on this option, prior to export (in re - import), it merely to send the image to the original folder not in the preview pane the long side of the Photo original/s and L/R so if I want to work on this, once again , I open the L/R folder and drag it into an external editor.
I've been under DISPLAY/SORT but don't no if any option to choose here.
Hope you understand the question
Thank you
RussSorted
If image does not appear in Lightroom, check that the Source film indicator and the menu does not appear "previous import." If you have switched to "Previous import", access the menu, and then select all photographs.
-
Camera Raw 5.6 Bridge and Photoshop CS4 - back to the original image
New for Raw formats, bridge and CS4:
Question: I understand that when I opened the bridge images in Camera Raw, and then expand them changes aren't destructive or permanent, BUT I don't know how to get an image to its original data after I changed it. I don't know how to return the image to the original in Camera Raw or when I clicked "Done", returned to the bridge and want to, then try again with the original. How can return an image to its data or the original look?
Help would be appreciated.
Mary Ellen
In Camera Raw select Camera Raw default in the context menu of the ACR or Bridge, select Edit > develop settings > clear to go back to a virgin state parameters...
-
Photos lost track of the original images
I bought Aperture (my equivalent in local currency of 299 USD), then after that Apple stopped supporting the opening, I migrated to Apple pictures. Just today, I found that more than 500 photos imported from April 2016 are now show as zero KB in the Inspector. The original seem inaccessible to the Photos. The editing mode does not come when I click on 'Edit' and when I zoom to 100%, the image is rasterized. I cannot determine the cause of this, but managed to find the original images on my drive, in the files managed by the pictures, and themselves do not appear to be corrupt. It seems that the pictures or its metadata the library software is broken. I tried to restart my Mac and the repair of the library three times (starting Photos while pressing the cmd and alt keys). That did not work. Please can you help me?
In Photos preferences you have unchecked the preference for 'copy items imported to the photo library' (library management and the default and very highly recommended) or you have disabled this preference (a referenced library and strongly discouraged)
How you import these photos and what? What format are they?
LN
-
Satellite A200-1yo restarts from the drive with the CD player.
Hello
Can anyone advise me on my laptop Satellite A200-1yo.
I am currently rebuildingy laptop and I'm going to put the laptop on the screen is black and do give an opition to press any key to start the reconstruction.
He wrote but do want to rebot the drive with the cd player.
What should I do?
Thank you
Hello
You am I entitled?
You are able to turn on the laptop and you can see the Toshiba splash screen at the beginning, but you cannot boot from the CD.
Right?
Have you tested different CD bootable as drive Linux Live CD or recover from Toshiba?Theoretically the question could be just a bad drive but of course the CD/DVD drive could be faulty too if the CD/DVD drive cannot boot from any CD, and then try to clean the lens laser alcohol or cotton tip.
-
Can the Win8 recovery drive and the System Image be stored on the same device?
I intend to create a windows 8 recovery on my USB HDD drive. Then, I want to create a System Image using the file Win7 recovery tool, but put on the same HARD drive, so that I don't have 2 devices. Normally, I believe the recovery drive utility fits on a 256 MB USB key, but why not co-exist with the system image files?
Hello
Yes, you are right. To store an image of the system, the disc must be in NTFS format. Please refer to the information on the following link; If it's for Windows 7, the information is true for Windows 8 as well.
Back up your programs, files and system settings
Hope this information is useful.
Maybe you are looking for
-
How much space Foxfire requires for downloading? How to operate optimally?
-
Develop applications on Motorola Defy android
Hello. I'm going to buy a phone, a Motorola Defy, and I was wondering if I could use it as an android application development environment. The applications will be simple, nothing fancy. So the question is: can I use this phone to build android appli
-
Identifier however not passed correctly with nxWriteFrame()
#define CAN_FRAME 0x00#define NORMAL_FRAME 0x00 u32 ID = 0x18FC9FFE; OutputSingleFrame (ID, CAN_FRAME, NORMAL_FRAME, "ABCDEF0102030405"); void OutputSingleFrame (u32, Type u8, u8 flags identifier, char * PayloadString) { int i = 0; Info U8 = 0; Not u
-
Hey, I opened a page that runs Flash this always whenever rises ' TypeError: Error #1009: cannot access a property or method of a null object reference. to town_fla::Button_237 / frame1 () '. The dialog box gives me two options either urgent cont
-
User login problem I have only one user, and the user name is messed up, so when I try to log on the user name does not match the password. So, I just can't. I tried the F8 key it didn't have anything to help me. All the answers? Please, I beg you. I