Recalling saved worth States of Rohde & Schwarz NUMBER VNA with Labview

Similar Questions

• Error BFFF0015 on viRead occurred at Rohde & Schwarz-FSV

  Hey,.

  I work with a Rohde & Schwarz FSV Signal/Spectrum Analyzer. I want to create an application using Microsoft Visual Basic 2010 Express which connects to the Spectrum Analyzer using a GPIB-USB connector (here the GPIB-USB-HS of OR). So I download this sample program in VB.Net on R & S website.

  To use this example, a pilot (rsspecan) R & S is required to work with the device. The import of the driver in my Microsoft Visual Basic 2010 Express project works very well and I am able to access the functions of the api.

  The sample program above caused a time-out (BFFF0015) error when reading data with the function "m_Instrument.QueryTDomPowerResult (1, 0, 0, resultPeak).

  With the program Trace NOR I could get the orders of Visa:

  

  You have any ideas? Any input would be appreciated.

  I'm using:

  Software:

  Win7 64 bit

  Microsoft Visual Basic 2010 Express

  NI-VISA 5.1.1.

  NOR-488. 2 version 2.8.1

  rsspecan Driver of instruments for 64-bit Applications (see www.rohde-schwarz.com)

  Material:

  R & FSV S

  GPIB-USB-HS of NOR

  Thanks Andyy

  This work, user: password tool: 894129 (R & S headquarters phone number)

  Note the resolution must be larger than 1024 x 768 for the "Softfrontpanel" available. Press F6 to say - / activate (http://www2.rohde-schwarz.com/en/service_and_support/Downloads/Application_Notes?type=20&downid=2499...

  VNC works as well, see: http://www2.rohde-schwarz.com/en/service_and_support/Downloads/Application_Notes?type=20&downid=5141

  BR j.

• Under settings, where device iPad or serial number starting with a D?

  Parameters of sixth, where can I find my device number, begins with a "D"?

  I found my answer to the title of "General / about.

• Serial number starts with the (s)

  New mobile bu66us has the serial number starting with (s) whatever that means?

  If the serial number of the device is starting with S, it could mean that the system is manufactured in a country for which HP is coding in the "S" form. It is purely for internal decoding. Please do not much worry about the serial number.

• If I buy a new hard drive, I use the activation number provided with my computer to re - install Windows XP?

  activation and replacement hard drive

  Greetings from St. John's Newfoundland. My wife has given car for my birthday washer and I wiped the ENTIRE hard drive, including the operating system. (XP). I have recovery CD but the computer will not read and install XP. I want to know it is if I buy a new hard drive, can I use the activation number provided with my computer to re - install Windows XP?

  Hello

  Yes, you can use the activation code for re - install Windows XP.

  Note: If you have exceeded the number of times to activate the product, then you would not be able to activate, you may need to contact the manufacturer to perform a factory restore.

• I have hp photo creations, and I saved all my projects. now, I'm done with them, how the unsaved?

  I have hp photo creations & saved all my projects, now I'm done with them. How do I possibly them?

  Hi Rocky.

  Are you saying that you want to Remove your projects?

  Until you do this, consider saving them to a flash drive or download them with the Share button. If you click on the "customize and print" box, you will be able to print your new project or change it later. (See image below).

  Our customer support team can help. They are [email protected].

  

  Thank you for using HP Photo Creations,

  RocketLife

• I need to change the VAT TAV number associated with my account, but he knows not way to do

  I need to change the VAT TAV number associated with my account, but he knows not way to achieve.

  I just redirected to a general ' contact' page, but nothing to solve the problem.

  H I'mmiguel,

  Please contact our customer service team, follow the link below:

  - Contact customer service

  Sign in using your Adobe ID & click on "still need help? Contact us button.

  Kind regards

  Nicos

• How do I register a very old acrobat from adobe and then download the upgrade? It seems that the serial number is not consistent with the serial number required by the adobe Web site. My serial number starts with the letter instead numbers.

  How do I register a very old acrobat from adobe and then download the upgrade? It seems that the serial number is not consistent with the serial number required by the adobe Web site. My serial number starts with the letter instead numbers.

  Please see:

  Redeem your student and teacher edition purchase, convert a redemption code to a number of series and much more .

  I hope this helps.

  Concerning

  Megha Rawat

• ADOBE does not recognize the serial number provided with my product - Photoshop Elements - as a serial number valid.  No telephone support!  How to install this?

  Someone had a problem installing Photoshop elements with the serial number provided with the product?  I don't know how to fix this, I can't afford to just throw this product and buy the most expensive suite.

  Please visit: https://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

  I hope this helps.

  Concerning

  Megha Rawat

• Serial number provided with the software is yet to come as being invalid

  Serial number provided with the software is yet to come as being invalid

  What software does?

  Error "serial number is not valid for this product". Creative Suite
  http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-valid-product.html

  To locate the serial number:
  ----------------------------

  http://helpx.Adobe.com/x-productkb/global/find-serial-number.html

• Why a new course after launch program run whenever I start my computer? The startup program is from XI player. The only name on it is a number starting with 141___.

  Why a new course after launch program run whenever I start my computer? The startup program is from XI player. The only name on it is a number starting with 141___.

  See also https://forums.adobe.com/thread/1654402

• Serial number provided with the download doesn't work, now what?

  Serial number provided with the download doesn't work, now what?

  Contact support directly by phone or web chat.

  Mylenium

• Rohde & Schwarz SMFP2 control

  Hope you can help push me in the right direction, learning exercise for me, non-commercial only.

  I have an old & R S SMFP2, with control GPIB described as IEC 625 - 1 (IEEE) 4888 datasheet.  I also have a not quite as old NI GPIB-ENET (not the 100 or 1000). This setting is configured with a static IP 10.0.0.200.

  Pilots of are all loaded on my version portable 2.2 and map has been updated with the latest firmware A.5 and the 4888.2 NOR getting started Wizard says that everything is OK when I check the installation of hardware and software.

  When all connected up to the SMFP2, I ran solution under devices and measurement and Automation Explorer and the interface tree sees GPIB0 (GPIB-ENET) and who can see Instrument0.

  Main address is 30

  Secondary address 0

  Identification of the device has not responded to a * IDN? query

  GPIB interface number 0.

  At this point all looking good so I will now try to communicate with the Instrument using the Communicator. And it comes to have I can't get reliable answers to the instrument.  I copied the sections of the manual here, sorry this is long-term.

  Each statement to modify a parameter consists of at least an initial charater (header) and the last character (deliminater).  When data on a framework must be transferred, eneter the data bewtween the two characters limiting.  All characters are transmitted in code ISO 7-bit ASCII.

  When the measurement is complete, the result will be called before a new m, easirement is done, because otherwise the data would be overwritten.

  The deliminater for the output is defined in the tester as CR.  If you enter a string of fauolty, a service request (SRQ) is sent through the CIS.

  The control statements are listed:

  The function code

  Recieve AR

  AM AA

  FM (ALBERTA)

  CCITT DC

  etc.

  #

  Functions of Code entry

  SIG Gen AG123.4567 where 123.4567 is the frequency in MHz

  etc.

  So I have been tring that I thought maybe the correct things to type in the Communicator send window channels such as:

  30 AR

  AR

  These do not work, but I get better results with 30, or AR, AR, but have to send twice before getting action

  Even if I want to put the frequency 30, AG222.4444 sets the frequency after only two starts, I can't question the instrument or reading, he thinks so I do not have the right format.

  Can anyone help, if you recognize the former instrument etc.

  Please provide a pointer. trying to remember how to program in C will come much later.

  If I need to provide more information please, just ask and I will try my best.

  See you soon

  Adrian

  Hi Dennis

  I accept that I am not making sense in many.  Please bear with me.

  Old machine, it looks like that's not 488.2 as he was listed as CIS 625/ieee488 and date from the beginning of the 1980s

  The manual says that the deliminater for the output string is defined in the tester as a carriage return.

  A default command is AR

  or AG123.4567

  or BO99

  I have been going through some of the documentation and used MAX, where he could find my instrument is attached to the GPIB/ENET and there is a function to communicate with the instrument "Communicator of NOR-488. 2,"where it seems that I can just enter a string and click the write button, or enter a string and click on the button of the query if I want to read data from the instrument.

  I could not it works.

  AR must switch on the generator of signals, but not entering AR as the chain and hit the write button.  For some reason, I tried the combinations that I thought I might have to enter the address of the instrument 30, so I tried 30 AR or 30, AR and strangely if I hit twice the write button, it worked?

  That's why I asked the question initially.  I've proved since the instrument is fully functional, I now external software that speaks and is fully functional with the instrument.  But I would still like to send commands to him myself as a learning exercise.

  While going through the site search facilities NOR I fell RPIC legacy interactive control and I will have more success with that.

  What he just told me in the documentation, it's even if I put the EOS as 0x000D, I must still enter using \r.  So guess what I just tried in the Communicator of NOR-4882, entered string AG123.4567\r click on the write button and the device responds first time every time.

  So I guess I'm happy with my first steps.

  When I wrote, Communicator, I can't close the sending (0, 0x001E, "BO99", 4 (0x4), NLend (0x01)) I was using spy OR to monitor external software and then enter my strings and see if I managed to get near my captured file.

  Anyway happy now all for the want of a \r now give up for the night.

  Adrian

• Buy an iPhone Unlocked 7 in Apple stores in the United States without effective phone number and SSN?

  I am a foreign student in the United States, without SIM card and SSN, can I get an iPhone Unlocked 7 Apple store?

  If you pay full price, you may download the Verizon model at this time. That's assuming they have everything.

  If the store is close to go and ask them.

• Saving the State of the application to resume later

  I have an application that runs a few pumps and saves about 40 items (from two typedeffed different clusters) every few minutes. The rate of pump are determined by about 10 of these elements. I want to add features to get the application and empty the State of these poles into something like a spreadsheet and later all these values that have been set up. Theres also a graphic wave form which I like to keep the data, as well as some front panel States of objects (buttons are disabled etc.)

  How did you guys would handle this? I tried to use somehting like a variant of flatten it to a string, but it is riddled with errors.

  ijustlovemath wrote:

  I was just looking for other reviews, I usually find a lot of them on this forum! I will certainly find in config files and weigh the benefits. Thank you!

  It's mostly a question of readable how you want the files are located.  If you want to read clearly the information contained in a text editor, go with the configuration file.  If you want something a bit dark, but still a little readable, go with XML.  If you don't want users to be able to read this thing at all, just save a binary file which will be faster and probably smaller.