reCAPTCHA does not load properly, I get an image unsolveable select recaptcha instead of the recaptcha, loads fine on Chrome box

Similar Questions

• When I click and drag a window to move its location on the screen does not move properly.

  When I click and drag a window to move its location on the screen does not move properly. It leaves a "track" of windows. Whatever the problem is scroll is also affected when the page moves in waves. Why he started to do this, and if someone can offer a solution? Thank you!

  original title: "leakage" of windows

  It is a common problem with how XP displays the items on your screen. When things get a bit bogged down, you'll start to see trails of the window as you drag. Unfortunately, there is no solution, but future versions of Windows do not have this problem with a new rendering of the graphics system.

• I downloaded Multi Access Tool from Mcafee with Firefox Mozilla, how do I reinstall if it does not work properly?

  I downloaded Multi Access Tool from Mcafee with Firefox Mozilla, how do I reinstall if it does not work properly?

  My sincere apologies, my Mcafee came via the Optimum/Cablevision, not Mozilla. I now managed to solve my problem and appreciate the 2 above responses. Thank you.

• Since the new update Illustrator does not recognize the graphics card to my SURFACE PRO 2 and the digitizer stylus does not work properly.

  Since the new update Illustrator does not recognize the graphics card to my SURFACE PRO 2 and the digitizer stylus does not work properly.

  Any ideas out there?
  I know the pro 2 surface is not the real model, but at least it should work fine.

  arwinq,

  You can see the system requirements, including the maps here.

  https://helpx.Adobe.com/Illustrator/system-requirements.html

  but I fear that you may be taken in this GPU issue described by butz in post #13 here:

  https://forums.Adobe.com/message/7773402#7773402

  You can try to switch between GPU and CPU by pressing Ctrl / Cmd + E, or you try disabling GPU performance by clicking on the icon of the rocket in the bar of the App, or on the top of the menu bar, deselect the box Performance GPU. You may also uncheck performance GPU in your preferences.

• I get an error code, ""this device does not work properly because Windows cannot load the drivers required for this device. " (Code 31) "on the computer.

  My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  Is anyone know how can I access my hard drive again?

  Thank you

  Hello

  You has made changes to the system before the error appearing?  Cancel the changes.

  (1) in Device Manager > right click on the driver, and then select uninstall

  Reboot and Windows will reload the driver

  (2) remove the upper & lower filters that cause errors in Code 31

  http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm

  Access the manufacturer's Web site and search for updated driver

• Computer does not recognize network. -This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Hello!

  I have problems connecting to my network. I stay in a House (not my own) and I can't connect to the network in this House. When I choose the option 'connect to a network', nothing happens. I followed the instructions to display the "Device Manager" and watch the 'map', and he said:

  "This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  When I click on this button, nothing happens... Should I simply wait for Microsoft to return to me - or is there something else I need to do?

  Thank you!

  Hello

  You must get the drivers latset for m computer support site.

  Delete the "false: entry in Device Manager and install the new drivers."

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Error: This device does not work properly because Windows cannot load the...

  I get this error message "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) "via a wired connection. And that's the Microsoft 6to4 adapt #7 and the same card but the #4 one.  Are these drivers or another file that I could use DL?

  Hi JasonBedgood,

  1. Once you get the error message?
  2. did you of recent changes on the computer?

  This error occurs if the required driver is not installed or the driver is damaged.

  I suggest that you update the driver for the device and check.

  How can I update the driver for network card on the computer

  1. click on Start, click Control Panel, and then double-click System.
  2. click the tab hardware , and then click Device Manager.
  NOTE: If you are prompted for an administrator password or for confirmation, type the password, or click continue.
  3. click on network adapters to expand.
  4. under network adapters, double-click the entry for Microsoft 6to4and then click driver .
  5. click on Update driver software.
  6. follow the Wizard update software driver to update the driver for NICs .

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the device driver update did not help then check the link below for one of the thread with the question and try the steps mentioned by Lionel Chen on January 9, 2008
  http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/3a503cdb-e61c-44BC-97c4-0b38b0e5f929/

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Skype does not load properly and leaves no connection either.

  Hello.

  I recently installed Skype 6.21, however it does not load properly. And it won't let me log in either. I tried to uninstall and reintsalling but still the same. No idea what is the problem? Here's a screenshot of it

  

  Your image is not yet visible. It may take a while before this image is approved by one of the moderators of the community.

  You see something similar to this?

  http://community.Skype.com/T5/Windows-archive/Skype-login-looking-weird/m-p/2258915/highlight/true#M...

• Installation of FSX does not load and gives me two choices: remove 1 or 2 repair. Whichever one I'm taking, I get an error code 1605

  It does not load on my calculation of FSX Deluxe or gold. a screen asking me to choose to repair the existing files or delete all files.  Whatever it is I want the same message comes back, this software and only repair or delete files when the files have been installed previously, and then I get an error 1605.  I tried the resetsldl.exe command and it say I was seccussful in the license reset, but when I try to install the software, the code 1605 back.  bought another copy and the same thing happens

  Please do not let your Windows version a secret.

• I get the error code 66A with an update that does not load

  a windows update does not load, I get an error code 66A, its boring, I can't get an answer anywhere

  See Andre.Ziegler response to a previous post about the error code:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/107c5a3a-3126-4EAA-930E-815aed8a2582 >

• This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Original title: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in the graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel, what do I do to fix this help please.

  Jake

  Hey Jake,

  Follow these methods.

  Method 1: Follow these steps:

  (a) restart your computer if you have not already done so. There is always the possibility that the error Code 31 that you see was caused by a temporary problem with Device Manager. If so, a simple reboot can solve the Code 31.

  (b) have you install a device or a change in the Device Manager, just as the Code 31 error appeared? If so, it is very possible that the modification caused the Code 31 error.

  (c) cancel the change if you can restart the computer and then check again the error Code 31. Depending on the changes, some solutions may include:

  Remove or reconfigure newly installed unit.

  Restore a version prior to updating the driver.

  Use system restore to undo the Device Manager recent related changes.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  (d) to remove the registry values filters upper and lower. A common cause of errors in Code 31 is the corruption of two registry values in the class of the CD-ROM/DVD-ROM drive registry key.

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: Update the latest graphic drivers.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• Huawei Mobile Connect 3 G Modem this device does not work properly because Windows cannot load the drivers required for this device. (Code 31).

  System: Windows 7 Ultimate 64-bit. QC processor 2.5 Ghz, 4 GB RAM, Nvidia 9600GT. The work of modem very well until about a month. Uninstalles the device, I reinstalled it but the same messages. I've updated the driver and software, still nothing. In safe mode, the modem driver is loaded and the devicemanager reports that the device is functioning properly. Once the system is booted in normal mode divcemanager reports: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). Help, please. I check the settings for the 6to4 drivers and there is no problem.

  Thanx

  Hi rui2010,

   

  Place your machine in a clean boot State to see if another application is in conflict with the modem.

  If this fails, I recommend you reach out to the community Hauwei for assistance:

  http://Forum.Huawei.com/jive4/Forum.jspa?forumid=46&orderStr=9

   

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• How can I get a plan if the page does not load?

  Whenever I click on the link to find a plan for the purchase, the page does not load. I just want to buy a plan! And I can't! What should I do?

  Hi Sara,.

  In case you are still unable to purchase online, you can contact Adobe sales team to place the order.

  800-585-0774.

  Kind regards

  Sheena

• Safari for Mac OS does not load certain pages

  After upgrading to Mac OS on my Mac Mini (end of 2011), everything seems to work properly. I rebooted the Mini just to be on the safe side. Everything went well. It was Tuesday night.

  Thursday morning, the first opportunity, I get to mess with it, I opened Safari, try to connect to my router Asus RT-N66U (with the latest firmware), but somehow Safari doesn't seem to like https, nor does it like .asp pages. Here is a screenshot of what's on my Mac Mini Safari:

  

  I then decided to download Google Chrome. I installed (never had on this Mac Mini), but the page works perfectly and quickly.

  I have reset everything I could on Safari, including clear them cache, clear history, tried the developer mode (no matter WHICH mode in there still gives the same results)... on the cable connections and wireless. Chrome works without a hitch, as Safari before Tuesday. Now, nothing...

  ... However some pages such as Google.com or Apple.com loading properly. I haven't checked if there are applets missing in the back or a dark rendering problem.

  Any ideas how to solve this problem? (I'll use Chrome until it is.)

  Safari - no support for third-party modules can cause Safari to suddenly quit, or have performance problems

  Safari does not load a page or webpage elements are missing

  Safari / other browsers - Web site does not

• Recovery DVD does not load

  Hi guys,.

  I use a HP Pavilion A6120N Vista. It has a SATA RAID 0 HD value.  Machine will not start. After ordering the HP Recovery Disk Set, I tried to run the program of recovery.  It displays a message that "Windows loading files...". ». When the progress bar is completed, I get a small bar (2 1/2 inch long) with a few lines on this subject moving from left to right.  Below I have the symbol of copyright and Microsoft Corporation.  But it makes no further along than that.  I put the devices to boot from first and second for the dvd player.  I tried to start with each of them the three DVDs.  I tried to start with disk 1, 30 minute wait and the withdrawal of disc 1 / insert disk two.  I tried booting with the UBCD and another bootable cd and then insert disc 1.  I tried to start with the two disc and pressing F11 I got "Disk Boot Failure, Insert System Disk and press Enter". When I replace it with two disc, I get the same results as above.  Nothing works. If anyone has any ideas, I'm open for them.

  After trying on & more, I got another result.  Without the disc in the drive, if I do not press F11 at startup, I get a choice of starting recovery or start windows normally.  These two choices lead to the small bar mentioned above with the lines moving from left to right. If I press F11, it goes straight to "Windows loading files...". "and the little bar with lines.  I chatted with HP support and they said the 800 number.  They told me that the OS is corrupted which causes the restore disc does not load.  Now, I thought that starting a CD/DVD without going through the operating system.  What's in Vista?  Can he change?  I saw as a warning to the other cd/dvd drive (dvd - rw 16 x pbds dh-16a1L) requires an update of the firmware to recognize the HP recovery discs.  I have the drive HL-DT-STdvdrrw.  Could it have the same problem and it had not just been documented?  So far, I am at a total loss.

  Thank you

  Message edited by TennBlues on 30/12/2008 21:58
  Message edited by TennBlues on 12/31/2008 12:03 AM

  AFAIK boot failure disk means one or both of the drives went bad or BIOS (F10) must be set to zero by default. So if the raid 0 Setup and a defective hard driveis then you need to get out that the hd and run recovery on the drive to work or wait until you get to another replaced.

  No, you do NOT have a corruption of the operating system, and Yes, the recovery disc bypasses the operating system on the drive. Windows Vista disk hard is not effect or prevent recovery disks because the disks will always wipe clean first the drive working.

  Try the following steps.

  (1) reboot the pc and go into F10 for installation (for vista)

  On the MAIN tab, check to make sure that your hard drives are both recognized where says 1st or 2nd disk, etc.

  It should look like WDC, SAMSUNG, ST... etc.

  (a) if it is not in the list, then check the SATA cable and power cables inside your computer to make sure it is plugged both ends properly and reconnect the cables to the two discs.

  (b) if only 1 disk is listed, then the other one may went bad on you and I would be the wrong drive breaker go back into the BIOS F10 menu and check that the right drive appears under you devices.

  I would then run a recovery disk of 1 until you replace it. In this case you will not have a raid 0 configuration more since she was only 1 player used.

  (2) try also reset the BIOS default settings by going to the menu of the BIOS F10 at startup and press F5, then press Yes then enter then F10, then Yes, then enter to restore the default BIOS settings.

  (3) after the reboot back to the BIOS menu and go right on the Startup tab and choose boot DEVICE PRIORITY and set the 1st boot device to the Group of HARD drive, then save the changes and exit the BIOS.

  If you want that you set the CDROM boot first yo group.

  You can also turn on the pc and press ESC to boot from the hard drive or a disk drive group.

  I recommend first resetting the default BIOS settings and check the devices first, before opening the pc.

  Message edited by c0rnel on 12/31/2008 01:42