Receipt of the notice of my validated activities

Similar Questions

• OSITCP_pipe_send: Magic of the pipe is not valid.

  Hello!

  I have big problems with a six month old SG200 - 50 p. Randomly, the switch stops working, seems to restart without notice. Configure a SYSLOG server to intercept any useful information from the device.

  • (Image Active) firmware version: 1.3.7.18
  • Start the Version: 1.3.5.06

  I have attached a copy of the SYSLOG file. But I want to clarify a specific line, as seems to be the real problem.

  % OS-F-CCI: OSITCP_pipe_send: magic of the pipe is not valid. Pipeid - 1702259060, magic - 1634498143 * FATAL ERROR * task Reporting: NCCD.  Software version: 1.3.7.18 (date of 12 January 2014 time 18:01:12) 0x16adc8 0x166f34 0x6df974 0x48fd60 490670 x 0 0 x 490890 0x6e785c 0x4c7950 0x4c7d5c 0x1223fc

  To be honest, I don't know what that means. And Google seems to be useless in this regard.

  I intend to update the firmware of this weekend, because I don't know what to do next. I have the same problem on another switch (SF200 - 48P), but it occurs less often (a perhaps a month).

  No information on this error message would be appreciated, as I try to understand what is happening.

  Thank you.

  Hello

  I see this question once only once but reset factory and the manual configuration seems to solve the problem.

  If you however still see this error please open ticket with small business to engineering team can look into it:

  http://www.Cisco.com/c/en/us/support/Web/TSD-Cisco-small-business-suppor...

  Kind regards

  Aleksandra

• I opened a new tab, but the boxes disappeared and comes with "the address is not valid.

  I opened a new tab and it used to show my recent history in about 12 boxes but now I get this:

  "The address is not valid

  The URL is not valid and cannot be loaded.

  Oh dear.

  Unfortunetly, you'll have to do a clean reinstall of firefox.

  https://www.Mozilla.org/en-GB/Firefox/new/

  Don't forget to restart your PC inbetween facilities

  Good luck

• When I click on my icon of firefox homepage says "the address is not a valid URL. The URL is not valid and cannot be loaded. How can I fix it?

  When I downloaded Mozilla Firefox and clicked on the Firefox icon I get this message on the Firefox homepage "the address is not valid.

  The URL is not valid and cannot be loaded. "I can always access the internet but what do I do to get rid of this message. The home page does not display the icon of firefox.

  You can check the setting of the homepage:

  • Tools > Options > general > startup: Homepage

  Firefox supports several home pages separated by ' |' symbol (pipe).

  • https://support.Mozilla.org/KB/how+to+set+the+home+page

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• I received a signed email (signed by IdenTrust) Thunderbird said the signature is not valid. It says that I do not trust the CERT authority. Help please.

  I sent an email signed by my work at home (which uses Thunderbird). I can read the email ok but get the following certificate error message:

  This message contains a digital signature, but the signature is not valid. The certificate used to sign the message was issued by a CA that you do not trust to issue this type of certificate.

  The issuing authority is: IdenTrust ECA 3

  How can I alleviate this problem? I need send emails encrypted back, but without this work, it is impossible.

  Thanks in advance.

  You must have the root CA cert in the store of certificates of Thunderbird on the References tab.
  The error message indicates that the cert is, but you need to change the trust.

• The address is not valid problem when opening new tab

  opening of firefox (I crash usually close under Task Manager), it reloads all tabs as it should.
  But when you open a new tab, I get "the address is not valid.
  I tried all the parameters of the start of the blank home page and latest opening option.
  I have tried all suggestions in other markets, reset... Subject: config
  I wish it had a document giving detailed information for all parameters
  When on the topic: config and search newtab, the only user adjustment (not default) is
  browser.newtabpage.storageVersion; 1 and I tried 0,1,2,3,4,5 restart no change even between the two.
  Have been re-intall, reset, safe mode, nothing works
  the tab works normally after the error, which means that I can start typing in the address bar and even complete works of auto... I restarted just fz and he did a 27.0.1 update
  that did not fix it either... I'm bored of the default page of fx that has recent photos.

  
  

• I get this error message 'The URL is not valid and cannot be loaded' when I try to go to Firefox home. I uninstalled the modules, uninstaleed and reinstalled a new fresh firefox which did not help

  I get the following error message 'The URL is not valid and cannot be loaded' when I try to go to firefox home. I uninstalled modules, uninstalled Firefox and then install a new version. Still have the problem.
  Thanks for the help

  This problem may be caused by a corrupt installation of Visual C++ or incomplete (several versions can be installed-by-side; SxS) it lacks certain runtime components (redistributable Packages), which depends on Firefox (problem with an embedded manifest file that specifies a specific runtime version).

  You need to install the missing components (for example, Redistrbutable end 2005 ++).

  • https://www.Microsoft.com/download/en/details.aspx?ID=5638
  • [908165/questions/908165] The URL is not valid and cannot be loaded
  • bug 713167 - Microsoft.VC80.CRT SideBySide errors, browsercomps.dll

• Recently downloaded version 9.0.1 and the url is not valid for the default home page. The default home page is still supported?

  I currently have www.google.com set as my homepage, but Firefox says that the url is not valid for the default home page.

  The problem is now solved with the current version of Firefox 10.0. Thanks for the help ccbrunt and SafeBrowser.

• Firefox cannot load a secure website and refuses to either continue with manual approval or fails to add the exception while it confirms the certificate as being valid.

  When you click on the link below, firefox will move the site but a notification that it cannot check the secure connection to the user. Technical details the certificate is not valid (no other useful information here) and the button "get out me of here ' reveals a screen where there is a message saying the certificate is valid and is not necessary to add an exception. All buttons are greyed out and thus preventing access to the site. No overrule or any other method works, so we (= society) are forced to use another browser to access our suppliers e-learning environment. I tried to change the two flags in topic: config, but apparently those who are depricated because they affect behavior. (browser.ssl.override_behavior and browser.xul.errorpages.expert_bad_cert) - edit: apparently the link falls. Here is the link: https://wbt.progress.com/

  There is an intermediate certificate missing (GlobalSign organization Validation CA) who is not sent by this server.

  • http://www.Networking4all.com/en/support/tools/site+check/

  If Firefox has not saved it to move to another site in the past, then you will get the error unreliable.

  • http://www.GlobalSign.com/support/intermediate/organizationssl_intermediate.php

• VISA (Hex 0xBFFF001E) error the specified state, the attribute is not valid or is not supported as defined by the resource.

  Hello

  First of all that I must say I just starting with control of the instrument using Labview. For this reason, it is possible that the problem I have is easy to solve. However, I am looking for any solution for the forum, but unfortunately I can't fint anything.

  While the situation is this: I'm looking to plug a power Analyzer (Yokogawa WT1800) with the PC through GPIB. To achieve this, I use the USB/GPIB Interface of Agilent 82357 B. The connection is done correctly because I can see and communicate with him through the Explorer NI MAX.

  In order to achieve control of the instrument using Labview, I downloaded and installed the driver of Yokogawa WT1800 (Driver instruments ykt1800) using the NI Instrument Driver Finder tool. The problem I have is that when I run the examples, I find the following error message:

  Error 1073807330 has occurred to the property (arg1) node in Yokogawa WT1800 Series.lvlib: Initialize.vi-> Yokogawa WT1800 series continuous measurement Normal.vi

  Possible reasons:

  VISA: (Hex 0xBFFF001E) the State specified, the attribute is not valid or is not taken in charge as defined by the resource.

  I tried to change the input of the open Visa arguments vi because I think that this is where is the problem, but I can't reach any solution. The following image is attached to the block diagram of the initialize.vi:

  

  Any help is appreciated.

  Thank you.

  I suspect the redirect property. Try to remove it.

• ThinkPad Tablet 2 - error 2201: UUID of the Machine is not valid

  I just unboxed my "nine" Thinkpad Tablet 2 and got an Error Message 2201: UUID of the Machine is not valid.

  Network card, sound card, USB camera don't work at all. They said that I have not installed drivers for these devices. Because I can not connect to the Tablet, I'm unable to install a driver for them.

  Can someone guide me to solve this problem?

  TKS you all!

  Yes, you will need to send the machine back for the service.

• NOR-IMAQ: The transmitted session or the interface is not valid, why?

  Hello:

  I am facing an error that I can't explain. I configured a NI 1742 smart camera, to do some tests. The camera is configured in Max Max I can make some shots of the image and image captures without problem, I can do the same thing in the Vision Assistant. However, in LabVIEW I can't even start a session IMAQ.

  

  When I try to log in with the Vi Init IMAQ, I always get an error that says "NI-IMAQ: the transmitted session or the interface is not valid. I don't understand why this is happening. I did some research and found that this error indicates when the specified interface does not exist or the unit is unplugged. But I checked and rechecked, and as you can see in the previous image, the interface exists, and of course the smart camera is connected and working. No error status displays the status doesn't lead. I tried with the VI generated with the Vision Assistant, but had no luck, in LabVIEW always manifest error.

  

  

  I have LabVIEW 8.6, Vision Assistant 8.6, OR-IMAQ 4.3, MAX 4.6.1

  No idea why this error?, I tried, but I can't understand why!

  I really appreciate help. I'm a bit desperate.

  Thanks in advance.

  Robst.

  Hello

  Just to make sure, you run LabVIEW RT? and if you are, you are your VI running on my computer or have you create a project and added to your target of the smart camera and the VI under this goal?

  If you use your VI on your local computer, the error message makes sense because there is no img0 interface in your computer.

  -Christophe

• VISA: (Hex 0xBFFF001E) the State specified, the attribute is not valid or is not supported as defined by the resource.

  I try to open a com port Seraglio in LabVIEW get this error:

  VISA: (Hex 0xBFFF001E) the State specified, the attribute is not valid or is not supported as defined by the resource.

  It occurs in ISA set up a Serial Port (Instr) .vi and seems to be related to the speed of transmission. If I use anything else than 9600, I get this warning. I need to use 115200. I can open successfully to other com ports at 115200.

  I am able to talk to this device using other Terminal programs to 115200 without problem. It is only through LabVIEW and NI MAX.

  The Unit presents itself as "Stellaris Virtual Serial Port (COM12)" in deveice Manager.

  Is there a way to get around this?

  Thanks in advance!

  
  

• A .cab file needed for installation is not reliable. Please check the Cryptographic Services are enabled and that the cab file is valid .__Help! __

  OK, so I need DirectX 0.9 c to the game red alert 3, but I can't on the new directx installed on my computer because of this error
  A .cab file needed for installation is not reliable. Please check Cryptographic Services are enabled and the certificate file is valid.

  have you tried solutions on how to solve this problem posted by mods on the previous posts with a similar problem, but it does not work for me

  help is appreciated, thanks

  Game of automatic encryption Services Cryptography on AutoServices and then try again to install the program. To set the cryptographic on AutoServices, follow these steps:

  1. Start the Administrative Tools utility in control Panel.
  2. Double-click Services.
  3. Click Cryptographic Services, and then click Properties.
  4. Click Automatic for Startup type, and then click Start.

  Reference: http://support.microsoft.com/kb/822798/ and follow all practices listed in the article.

  Man is the only animal that laughs and cries; because it is the only animal that is struck by the difference between what things are and what they could be.

• Outlook 2002/Windows error message 7: can't open this item. The object is not valid.

  I recently bought a new computer (eMachine ET1831-05) with Windows 7 installed at the factory.  I installed Outlook 2002.  My old computer died & I have been unable to export my calendar, contacts, etc., so I'll have to enter everything manually in my new.

  When I save a calendar appointment is periodic (for example a birthday) I'm unable to open the appointment.  When I try, I get a message - cannot open this item.  The object is not valid. If I set an appointment that recurs not , everything works fine.

  Any suggestions?

  Thanks in advance!

  Windows Update has nothing to do with your questions.

  Please post here instead: http://social.answers.microsoft.com/Forums/en-US/outlookcontact/threads

  THX

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft