Receive a stop error message when you try to install Windows XP.

Similar Questions

• I receive the following stop error message when you try to install Windows XP: Stop: 0x0000007B

  I need help with this error code: Stop: 0x0000007B (0xF7C85524, 0xC0000034, 0x00000000, 0 x 000000000)

  I'm a noob Microsoft Answers. I have an old computer, I'm trying to reinstall Windows XP.  It's a Dell XPS Dimension 3 (3.40 gigahertz Intel Pentium 4, 1 G of RAM).  It does start normally or in Safe Mode.  I tried to use Fixmbr, Fixboot, Bootcfg/Rebuild, chkdsk/r, Memtest86, Killdisk.  I tried to install using another hard drive (which leads me to believe that it is perhaps a hardware problem).  He gave the same error code, I think, even if I didn't write it.  The only thing I found that I have not tried is "How do I recover from a corrupted registry that prevents Windows XP startup" because it is said that it will not work on OEM devices.  The error code is Stop: 0x0000007B (0xF7C85524, 0xC0000034, 0x00000000, 0 x 000000000).  I tried to install Ubuntu on two disks and they have installed and worked properly.  I don't know what else to try except hardware troubleshooting, although I'm not too good with hardware problems.  If you have any recommendations that could put closer me to a resolution I would be very happy!

  PS Windows XP actually ran on the second hard drive, I have tried (which is currently the drive in the machine at this time).  I installed it and it starts directly in Windows.  Yay!  I have restarted this configuration several times without any problems.  But I had a problem with the Microsoft Security Essentials update so I thought that a clean install would be better.  In hindsight, I wish I had tried harder to solve this problem, but I did not.  The first hard drive suffered a crash of Windows led me to be upgraded to a Windows 7 computer.  It was more than 1.5 years ago.  I just thought that the full back story might help.

  Hello

  I'm close to some (but my experience tells me very little is certain at 100%), which has a generic windows installation CD install without the need for the Setup F6 disk, as long as the BIOS is set to RAID Autodetect / ATA (or possibly 'mix'). AHCI is a more efficient disk access method but requires F6 floppy or "slipstreaming". If the CD is already slipstreamed for your PC, AHCI should work without F6. As you say your default BIOS to auto detect RAID/AHCI, I expect a CD specifically for your system to support it, while a generic CD would not.

  I doubt that they will provide F6 floppy but you never know. If you do not ask that you probably won't get.

  You can mark the answers on this topic as "answers"...

  

  .. But if I remember correctly, you can only score a maximum of 2 'responses. I offer my final diagnosis (and maybe my first answer) as candidates, but it is completely at your discretion. You can even hold off on tagging the "answers" until you get another CD from Dell and try. It also helps other people viewing this thread hoping to find a solution to 7B stops.

  You can designate the other answers as useful if you think that it is appropriate.

  Tricky

• After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help?

  After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help? (My disk utility shows that she in MAC OS extended (journaled) format.)

  It shows that it is Mac OS extended, not journaled. Click enable logging in the toolbar.

  The thing you read is if you format the drive using the RAID settings you have selected. You have to look at the bottom of the window where it shows the Format.

• I get the following error message when you try to install Windows Live Essentials for Windows 7-64-bit: __One installation files seems to be corrupted. HR:0 x 80070003

  I get the following error message when you try to install Windows Live Essentials for Windows 7 64-bit:
  One of the installation files seems to be corrupted. HR:0 x 80070003

  Hello Amawob,

  Thank you for using the Microsoft answers Forums.

  Solution:

  Follow the steps in the web link below.

  You cannot install some programs or updates.

  http://support.Microsoft.com/kb/822798

  Reset the Windows Update components.

  http://support.Microsoft.com/kb/971058

  That should solve the problem for you.

  Thank you.

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

• I receive an internal error message when you try to install Adobe 9

  I receive an internal error message when trying to get Adobe 9 to install?  In addition, I cannot print from Publisher and can't understand why

  For the problem of Adobe:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  They will help you with your question in Forum Vista programs at the above address.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  For the problem of the Editor:

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Publisher&lang=en&CR=us

  Discussions of general issues of editor

  See you soon.

  Mick Murphy - Microsoft partner

• Has received an error message when you try to install Windows XP Service Pack 1.

  Service Pack 1 Setup error

  The server did not respond. Go to Windows XP Service Pack web site and select "problems downloading the service pack.
  .. This will give you instructions on how to download a verson of the CIP tht service requires an Internet connection during installation. When I go there, I don't get any link to get this version, he told me to get, please... Thank you

  Try to download directly to your computer from these links.

  Service pack 1 and service pack 2 Service pack 1 has joined in.

  Here are the links where you can download and install Windows XP SP.

  Service Pack 2: http://www.microsoft.com/en-us/download/details.aspx?id=28

  Service Pack 3: http://www.microsoft.com/en-us/download/details.aspx?id=24

  I hope this helps.

• Error message when you try to install Windows on OSX 10.10.5 10

  I have a Mid-2014 retina Macbook Pro and I am trying to use the Bootcamp Assistant to install Windows 10 on OS X 10.10.5 and Bootcamp version is 5.1.4. I can't upgrade to El Capitan from now due to work related software, long story!

  I took the steps so far:

  (1) reset the PRAM.

  (2) reset SMC.

  (3) ensure that only a single partition is present using disk utility.

  (4) check the permissions of the drive and repair at least twice.

  (5) check the disc.

  (6) use Bootcamp assistant create the Windows Installer by using 64-bit Windows 10 iso file downloaded from Ms. All boxes have been checked.

  (7) in a suitable place when Windows Setup asks me what partition choose, I select created Bootcamp partition and click on Format. Product key has been entered each time.

  (8) installation continues until the point where it says "Ending up", then a pop-up window comes up saying "Windows cannot update the configuration to start the computer, Setup cannot continue."

  (9) I click OK and the window behind what is said "installation has been cancelled, any changes made to your computer will not be saved."

  (10) the computer is stuck on this screen for awhile. When, finally, he tries to restart, I just get a white screen. and eventually everything goes off.

  (11) when I turn on again, if I hold down the Option, I can see the OS X partition, partition Windows, recovery disc, then Windows on my USB (in yellow) and the "EFI Boot' in yellow.

  (12) I tried to click on Boot EFI, and goes through the same installation process and gives me the same error.

  (13) I tried to click on the Windows USB button, it starts to install (with the normal resolution unlike every other time) and this time gives me the error message "Windows cannot be installed on partition disk 0" (View details) "when I click it, it says"Windows cannot be installed to this disk. The selected disk is the GPT partition style. »

  I'm pulling my hair out on this one (and I don't have much to lose) Please HELP!

  Your Mac of 2014 is able to support two different types of Windows, most modern BIOS or EFI old installation.

  The Windows icon on USB is the method inherited from the BIOS while the start EFI icon is the most recent and modern method. Each has its own requirements for partitioning.

  2014 BC on 5.1.4 Assistant should have three check boxes. The first two should be checked only once to build the installer, while the last one can be used as needed.

  1. use the last checkbox to delete the current partition of BC.

  2. use only a USB flash drive (USB2 is preferable), other USB devices or SD cards cause problems.

  3. run SMC/NVRAM reset external storage after everything is disconnected.

  4. the USB should be directly connected on the Mac. Do not use a USB hub.

  5. your ISO source must be an ISO only 64-bit and about 4 + GB. ISOs larger and mixed-mode are not valid for MCR, although they can run on an ordinary PC.

  6 re - run BCA and check the last box - only install or delete... and try again.

• Error message when you try to install Windows Imaging Component ' wic_x64_enu.exe «installation cannot find the file update.inf...» »

  I'm installing MS wic_x64_enu.exe and get the error message: «Setup cannot find the update.inf file needed to update your system» I run SFC.exe and found no errors. I also reinstalled. NET40. and I still get the same error message.
  I am Windows 7 Ultimate SP1 64 bit on a HP PC with an AMD Phenom 9150e Quad Core processor 1.8 GHz and 8.00 GB RAM.
  I worked on it for a few days without result.
  Any help will be much appreciated.

  Giles

  Try this search http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/windows-imaging-component-installation-fails-in-my/a13c1e1d-361e-4601-8fc4-4d416edef853?tab=AllReplies#tabs in the registry.

  Run-->--> look forthis key regedit. Already installed.

  I have encounterd this problem by reinstalling .NET.

• Receive Visual C++ error message when you try to install HP deskjet D1600 in Vista

  error Microsoft Visual C++ will not let me install my new printer HP deskjet D1600

  * original title - trying to install new printer HP *.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3811075&LC=en&cc=us&DLC=en&submit.y=9&submit.x=7&lang=en&cc=us

  Above HP link uses drivers for it.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=3811075&LC=en&cc=us&DLC=en&submit.y=5&submit.x=9&lang=en&cc=us

  Installation/upgrade in place, manuals, how to use, etc., to the above link.

  For any other problem with your new printer, contact HP:

  http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=us&product=3811075&lang=en

  See you soon.

  Mick Murphy - Microsoft partner

• Error message when you try to install Windows Server 2008 64 bit

  Hello

  I have ESX 3.5 SP2 running on Dell 2950 2 x Quad-core servers and I wanted to watch Windows 2008 Server - 64 bit. When I tried to start the server after creating the new machine virtual and on installing the software on it, I received the message attached - how can I go about fixing/work around this?

  Thank you

  Paul

  (A) make sure the BIOS of the ESX PHYSICAL host has VT extension enabled.  Power off the computer, then power it restore AFTER the change.

  (B) configure the VM for 64 bit instead of 32 bit.  change the settings for the virtual machine.

  So if you all were doing correctly, your VM should now start

• Just recently, I receive the following error message when you try to access the web sites. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" then I have to click ok. There is a problem with some plugin?

  Just recently, I receive the following error message when you try to access the web sites. I use Firefox browser version 10.0.2. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" as the web site page is displayed in the browser winder. So, I have to click ok. Any link/website I go to what happens. There is a problem with some plugin?

  It is only a problem for the SiteAdvisor users who are still on 3.4. This problem is resolved in the latest version of SiteAdvisor, which is 3.4.1.195. Go to http://siteadvisor.com and click on download. This will fix the problem.

  Meanwhile, SiteAdvisor team will push down a JS update in the coming days 1-2 to automatically resolve this problem in version 3.4.

• Receive an error message when you try to INSTALL, can someone please pick up my computer and help me install?

  Receive an error message when you try to INSTALL, can someone please pick up my computer and help me install?  I'm on a MAC Version 10.13.3.  Thanks for the help!

  to do this, you will need to contact adobe in the pst time support by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html

  but they can refer here for help and no one here will (or should) have on your computer.  If they do, or someone offers to contact you via Skype, you're about to be a victim of fraud.

• that means a 42 b error message when you try to install an update

  What does a 42 b error message when you try to install an update?

  Hello
  • Updates are not installing?
  • What is the full error message that you receive?
   
  You can read the following article and try to reset the Windows Update components and try to install the updates.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
   

• Error message when you try to download Windows Defender: "first remove Microsoft Client Protection." Cannot find this file through the Add/Remove, search, including hidden or Win Explorer.

  Original title: trying to download

  WinXP SP3, Security Scan run and d/ld: error message when you try to download Windows Defender: "first remove Microsoft Client Protection." Cannot find this file through the Add/Remove, search, including hidden or Win Explorer. What to do now would be much appreciated.

  Also have a related problem about MS Maliciouws software removal tool. For download, but read in the KB that: in XP, the vacuum cleaner will remove the malware, but doing so may trigger the File Protection Win with damages to my operating system.  the tool will attempt to repair the damage, but to rehabilitate prior to infection, that I need to insert the CD of Win. As my computer came with Windows preinstalled, I do not have a disk and will not take the risk of damage, that I can't fix. Do I not download or not... ? Another solution... ?  I also fear that this tool could settle into the routine Win Update and need guidance on the prevention of this facility, if possible, or what to do if it cannot be prevented.

  It can have nothing to do with any of the foregoing. " I'm relaying only because it occurred during the same mission of update: had msg of error that Win Firewall has not been set as a default, which reset, but found this hidden file when searching for the Protection of the customer: "Win 32/Hackdef' - it was a config with the extension ini file and was deleted by Scan."

  Thanks a lot for any assistance.

  scate 39

  Hello

  ·         You have Microsoft Security Essentials on your computer?

  If you have windows installed on your computer security essentials, then you will not be able to install Windows defender. Windows Security Essentials has antispyware component installed.

  You get the error because you have installed MS Security Essentials, which has its own function to antimalware. You don't need or want to install Windows Defender, too. Leave MS Security Essentials installed and do not turn it off.

  See also:

  You can turn on or turn on the firewall in Windows XP, please see the link below:

  http://support.Microsoft.com/kb/283673

• Installation error 112 Setup error message when you try to install the software of the camera Kodak DC200/DC210 Zoom 1995

  Original title: initialization error 112 Setup

  1995 installed Kodak DC200/DC210 Zoom camera software.

  Explanations with the error: decompress the program files not all charges.

  Note: A message previous said that some files can not be installed at this time, because the areas have been used, and records still awaiting loading would be installed when the computer was restarted. (My phrase).

  I may not be a problem, but I don't know how I would like to know whether the error 112 was relative to the previous announcement requirement of a restart or another unrelated with error 112.

  Thank you

  Destry

  PS: You know; In appearance, it could be as silly a question as it seems... But I deal with my share of 'Error' messages, so I'll take the risk that the crazy and ask anyway.

  D.

  Hi Destry,

  1 windows operating system you are using?

  If you use Windows Vista, it seems that the Kodak camera is not compatible with Windows Vista.

  For more information, please visit the following links:

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/search.aspx?type=software&s=Kodak%20DC200%2f%20DC210

  http://wwwca.kodak.com/global/en/service/digCam/dc210/ownerManual/05inSf.shtml#88364

  You can try to install the device in Windows XP compatibility mode and check.

  Check out the links for more information:

  How to troubleshoot program compatibility issues in Windows Vista

  http://support.Microsoft.com/kb/927386

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  Also read the following article:

  Error 112 Setup Installation Error message"when you try to install a program

  http://support.Microsoft.com/kb/326678

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.