receive battery WARNING on start up. the battery meter indicates "94% plugged in, does not support".

Similar Questions

• In Vista when I hover over the battery icon, it shows plugged in, does not support

  When I hover over the battery icon, it shows plugged in, does not support.  Why my battery not charging?

  Hi Retha_T,

  1. What is the brand and model of your laptop?

  2. when the problem started?

  3. did you of recent changes to the computer?

  You can read the following article and check if it helps to solve the problem:

  Solve battery problems

  Hope this information is useful.

• My battery stopped charging. For four days, the power button says "59% available (plugged in, does not support)."

  * Original title: charging the battery

  My battery stopped charging. For four days, the power button says "59% available (plugged in, does not support)."

  How can I get the computer to start the battery again?

  The battery is probably faulty. You can say as follows:

  1. Shut down Windows.
  2. Remove the battery.
  3. Wait an hour.
  4. The power supply is cold? If Yes, then the laptop consumes no power (which is normal).
  5. Insert the battery.
  6. Wait an hour.
  7. The power supply is hot? If so, the battery is recharged.
  8. Start normally and check the charge level. If she's still around 59% while the battery no longer accepts the full load. You need to replace it.

• Plugged in, does not support? 4% battery

  My mother has recently bought a new laptop Toshiba, running Windows 7 64 bit, and I just noticed today that is not supported. I turned on her laptop today and the battery said 3% so I stop it, plugged and turned, and then turn it back on. The battery read 4% (plugged in, does not support). I did not notice the do not load at first, until he was 4% for a very long time. Then I looked at power management and advanced settings and there is nothing about this problem. I turned off the laptop and the battery light has not yet come, and when I turn the charger on / off power to the outlet, the light load on the laptop turns on only for a second and then turns back off the coast. I took out the battery, put it back in and then plugged in and now he is in charge. But when I turn it on it stops to load again, what is happening here? I know that my laptop doesn't charge no problem, what I can do to solve this problem?

  Since this is a brand new machine, contact the place she bought, or Toshiba directly. No sense screwing around with it while it's still under warranty.
  It sounds more like a problem with the hardware than software, and if you do too much in how to disassemble things, they are likely to say you cancelled your warranty.

  SC Tom

• "The files are on a volume that does not support Trash. You want to permanently delete the item? »

  All of a sudden I started getting error "files are on a volume that does not support Trash. You want to permanently delete the item?

  iMAC OSX 10.9.4.

  LR 5.6.

  Camara 8.6 gross

  Any idea?

  Please help me...

  Thanks in advance

  Jose

  It's quite common - there are several discussions about this.

  Simplest solution is to an empty folder on the disc, and drag it to the trash. LR will then work until you restart. You can empty the trash or not. Don't forget to make a different folder when you restart the computer.

• This is the error I get when trying Adobe Premiere of 13 elements of the configuration.  ERROR: This Setup program does not support installation on a 64-bit Windows operating system. Please download the 64-bit version of Premiere Elements.

  This is the error I get when trying Adobe Premiere of 13 elements of the configuration.  ERROR: This Setup program does not support installation on a 64-bit Windows operating system. Please download the 64-bit version of Premiere Elements.  How to work around this issue and get this downloaded.

  Lisa, please try of products download Premiere Elements | 10, 11, 12, 13 and let us know if you need help with this.

  Atul_Saini

• Battery - plugged in, does not support

  Hey,.
  
  I bought my laptop 13, 14 months ago...

  At the beginning, it appears 'Low battery' on the 15%, then new attention to 10%, then it turns off automatically.

  But since the past 10 years, 15 days my laptop charging time decreases every day...

  I noticed, 10,12 days ago, it was usually stops at 25% without showing any message "battery low"...

  After a few days, it starts to stop 40% without warning, and then again after a few days it starts to stop at 60%...

  (Originally my laptop take until 01:30 hours for 100% charging, but after getting in this situation, my load time is also reduced, as when it was stop at 40%, when I plug in, it will load entirely whitin half an hour and at 60%, charge time is more diminished and get completely loaded only in 15, 20 minutes..)

  But nowadays, laptop turns on only when I plug (and showing, hip, does not support) and down I took out. I checked by removing the battery and connect the charger, laptop works very well and can easily log on windows without battery...
  
  Someone please, detect and specify the problem and kindly let me know the Solution.
  
  Thank you HP...!

  Computer laptop specifications:
  
  
  Battery information:
  

  Well you could go on eBay and ask for part number hp or order it from hp.

  It's easy just take your battery and search search for model number on eBay but if ur stuck ask hp.

• Re: Satellite A500 (PSAR9E) battery - plugged in, does not support

  Yesterday, I noticed that my battery is at 74% - plugged in but not charging. Laptop not working ok, no problem.
  Before this problem occurred, I started it upward, he worked for 10 minutes on the battery without connected charger.

  Then it just stops what it self. I thought that maybe the battery was low so I plugged it on. After a while, I noticed that it does not load, I have it plugged into power-it shuts down as there is no current battery. Tried to remove the battery, plugged into the cable from the Jack, put back them, the battery cable, it starts and still nothing... Today it of about 72% and still does not support... Laptop is 2 years old. Battery has been working great until now.

  Please help if you know the solution, thank you!

  What to say?

  Start the laptop without battery and when the windows are fully charged put the battery in place.
  I imagine that the battery will be recognized correctly. Is the same situation when this happens?

  It will be interesting to know how it works with a new battery. At the moment, we can say more about it. The problem is battery or maybe electronic power?

  It is not easy to say what the problem is here.

• How much data transfer during the thin VMFS copy to NFS, which does not support thin?

  1. I copy using - VMFS volume thin for a 2003 hosted server NFS volume.  However, there is no indication that the destination in charge it is thin, and the size of the file becomes the size declared.  When I copy the NFS share that does not support thin volume VMFS does, the file becomes thin.

  a. when I copy volume VMFS volume NFS, the amount of data actually traverses the network?

  b. when I copy volume NFS volume VMFS, the amount of data actually traverses the network?

  2. I have two identical servers with the same 5.1 ESXi on them.  When I copy one of them, starts immediately to 0% and charges while the other starts immediately to 10% and progressive count.  I have never seen this on another server.  If anyone has seen anything like this before?

  Thank you!

  IT_Architect wrote:

  I know already that thin size and thick.

  If the sizes are well apart from each other, it would be easy to see how much is transferred.

• Could not load the doc Pages to iCloud. Said does not support the docs in packages. Why?

  When I try to drag a page to icloud file when it is opened in Firefox, I get the comment:

  Firefox does not support the download documents saved as packages
  Please use Safari

  What does that mean? What are packages?

  Hi Royden1,

  What is a page file and the template that you used to and what are you trying to use? Please research what the .pages file is compatible with, that means that Firefox does not support this file type. http://www.Macworld.com/article/20633.../how-to-work-with-iWorks-new-file-formats.html

• L50D-B satellite plugged in, does not support 0%. Battery in good condition health

  Hi guys.

  I've always had pretty good battery life out of my laptop 18 months old, but suddenly it says "0%, plugged in, do not load.

  The second I unplug power cord turns off (must restart completely when it is plugged in). I used the Toshiba PC Health software and it said that my battery has good health.

  I ordered a new charger online (pending on what happens). But I suspect it's more a problem of software - I don't know WHAT? Can anyone help? My computer took upon himself to update to Windows 10 this week, but what was going on before, but now, I'm stunned about where to find still something on this stupid system and my head will explode.

  Battery replacement is not an option due to the funds - I'll deal with it, if I owe to the track.

  Anyway, can until someone you please recommend something I can do? I read through the forum and through google, but the sudden upgrade to windows 10 has made it really difficult (and used all my mobile data, making it an expensive and unsolicited upgrade!)

  I had the same problem but seems to have got it works with Toshiba support assistance. It's what makes us
  1. turn off the power, remove the cable, remove the battery.
  2. replace the battery and cable
  3. turn on
  4. once the utility press F9 and Yes
  5. Press F10
  In my case the bars began to fill and the battery is charging. Then turn off and wait 30 minutes for the battery to fully charge.

  Funny, but the only reason why I got this result was because the computer store told me I had a week 4 wait a new battery and I need to be able to use it without the cable. He also said that the new battery has been the only solution...

  Guilbert

• Yoga 900 - battery plugged in, does not support.

  Hello

  I seem to have a 'No load' intermittent problem on my Lenovo Yoga 900.

  This happens often when it is fully charged and I unplug for a few minutes and then plug it in again. If I let it go below 93 to 95% it will tell usually "plugged in, charging" again.

  Is this some kind of glitch or a feature? I tried looking to see if I had the setting of 'conservation' and I do not have.

  I have a few days to take it back to the store if I need to. I'd really rather not send it because we have problems of the Stagecoach drop packets that end up getting robbed because we live in an apartment with several locked doors, so they usually it plant next to the door and run off and then someone else takes off with our business. Had it happens a few times with orders from Amazon. (grr)

  Thanks to anyone who can answer this question!

  Comment to Moderator: The model is added to the object for clarity.

  Good day and welcome to the community.

  It is my experience with my 900 Yoga and the Yoga s 900. In this way the system does not constantly on 1 or 2%, which is not good for the battery. In contrast, Mode of Conservation will be charge at ~ 60% and then stops. That has certain advantages, too. Personally, I don't use The Mode of preservation, and so far I have not seen no negative effect on my batteries.

  I hope this helps.
  Kind regards.

• Failed to start 'Google Earth'. Error indicates that DirectX mode is not supported. Had no problem in the past to connect to Google Earth in DirectX Mode. .

  Using Windows XP

  Hi Hazel,

  Method 1: Install the latest version of Direct X

  DirectX 11 is the latest version that has been published by Microsoft. You can install it on Windows XP:

  Use DirectX Runtimes (February 2010)
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=0cef8180-e94a-4F56-b157-5ab8109cb4f5

  Method 2: I suggest you to follow the article in the Microsoft Knowledge Base and check if it helps.

  Error message "Problem getting information" when you try to run the DirectX Diagnostic tool

  http://support.Microsoft.com/kb/817858

  Method 3: If the problem persists, please uninstall Google Earth of XP computer and reinstall it.

  (a) click the Start button

  (b) select 'Settings'

  (c) open ""Control Panel " "

  (d) open "Add or Remove Programs"

  (e) select ' Google Earth ' , and then select Remove

  (f) restart the computer.

  (g) download and install Google earth on your computer.

  http://www.Google.com/Earth/index.html

  Please post back with the result. If the problem is still not resolved, we will be happy to help you further.

• I just purchased Lightroom 6 and tried to install.  The program says "OS system req disappointed, does not support Windows Vista", but my operating system is Windows 7

  I was wondering if anyone else has this problem?  Any suggestions on what to try if your computer system tells you Windows 7 with Service Pack 1 , but the program disk Adobe Lightroom 6 says you have Windows Vista ?

  Copy disk files to a desktop directory.

  install from this directory.

  If you see this error again, right-click on the configuration file, and then click Properties > compatibility and the compatibility mode for win 7.

• ATTENTION: Target Version does not support the Option of role of subform

  Hello

  So I created a pdf file in which I defined fields called Total1, Total2 total 3...

  Now, ultimately as Grand Total, I am adding all those providing this command under calculate:

  this.rawValue = (Total1.rawValue + Total2.rawValue)

  while I do this, the Grand Total don't watch anything and warning message comes at the botton.

  Description: Target Version does not support the option of role of subform.

  Type: Target Version

  Supported by: Reader 7.0.5

  I would really appreciate if anyone can help on how to solve this problem

  You can send the form to [email protected] and I'll take a look?

  Please include a description of the problem in the email.

  Paul