Receive the error message"this device can perform faster if you connect it to a 2.0 port" in the taskbar

Similar Questions

• Message: This device can perform faster if you connect high speed USB

  Hello

  I have a laptop Toshiba Satellite 2009 of Vista.
  I just bought a multimedia design Memup Feel of the disc hard 500 GB.

  My concern is that when I connect to my PC, I have the following message:
  + This device can perform faster. USB devices can be faster if you connect to a USB 2.0 high speed +.
  + To get the list of available ports, click here. +

  Then I have a list of ports in bold, but I don't know what to do with.

  How to solve my problem?

  Thank you

  Hello

  Are you sure that your laptop is Satellite 2009?
  I put t know this model of laptop.

  But I know that this error message; This message appears if you connect a USB 2.0 device to a slower USB port; That is, USB 1.1
  But I think that your laptop supports USB 2.0 ports either TI problem disc external HARD s or the issue of USB drivers
  Try updating the chipset driver you can also delete all the USB controllers and hubs in Device Manager ports. Restart the unit. After restarting again the OS would recognize all USB ports.
  Then try to reconnect the USB HDD

• T40 USB question "this device can perform faster.

  Hello

  OS: Windows XP sp3.

  The USB is just using USB 1.1 speed and informs "this device can perform faster..." ». I googled for this issue in an hour now without solution. The driver on your page for NT4 system. Where can I find a driver to get the proper speed? Or FAQ post, just something.

  Thanks in advance

  BR

  Christoffer

  In your research, have you been able to find this link? : http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-50838

  Even if the document refers to Windows 2000, this means that you need the latest drivers of Intel chipset for the 845 and 855 chipsets to get USB 2.0 support working.

  The latest Lenovo drivers are available from the matrix of Thinkpad here (which are always old enough):

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-46058

  I had to do something similar (many moons ago) I had on my old T40, but the version of Windows XP is come with the correct drivers, I just need to use Device Manager to update the drivers from the default values of windows to the USB 2.0 version.

  Hope that helps.

  EDIT:

  You can also find information about the troubleshooting of devices USB 2.0 here:

  http://www-307.IBM.com/PC/support/site.WSS/MIGR-4YQHUD.html

  The most useful excerpt of this link is probably:

  Ensure that the USB device is USB 1.1 or 2.0 compatible.
  Connect compatible devices USB 1.1 on a compatible port USB 2.0 will cause an error dialog box to appear. This dialog box details that a device non-haute speed was attached to a port high speed. The device must operate normally, but at a slower speed than if a 2.0 device is connected to the 2.0 port. Most of the USB 1.1 devices will operate normally in the USB 2.0 ports.

  In case, the problem is with your driver (s) machine (s) rather than the hub/port USB driver.

• This device can perform faster ".

  the prompt: this device can run faster ' custody arise and no device is connected?  No usb port has a hip device?

  Again, nothing is plugged into a usb port.

  each comment that the system continues to show me tells me to unplug the unit.  There is no device.  what Miss me?

  Thank you

  Go into Device Manager, there may be something inside your computer, not only a USB / external peripheral. Look for something with an icon of warning or something. See if you can see what's wrong, give a screenshot or two, and we can work from there :)

• Cannot install a network - error message: this wizzard can not configure a network connection.

  Vista Business SP2 32 bit OS

  Impossible to set up a network connection using a wizzard.  Message: This wizzard cannot set up a network connection.

  A broadband connection was founded prviously.  There is no display of the network in 'connect to a network window.

  a new folder by name hiddenpbk appeared on the desktop and through which I can connect to the previously established connection.  but can not connect via "connect to a network window.  Neither I am able to set up a new connection using the wizzard.

  Please helpme.

  Hello

  Can you explain what connection to a network means in your case?

  What exactly you want to connect?

  If you have a valid broadband (Internet connection), you are already connected to a network.

  If you want to check your wireless system follows this process.

  If as a result of this process, you find something wrong, tell us what it is.

  Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  Note * people sometimes make mistakes in writing and retype the password for security.

  Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• T110-107 "this device can run faster.

  Hi, when I move the lid I get the message "this device can perform faster" referring to USB 2.0. USB transfer rate is very slow after this message. Any ideas? Thank you

  Hello

  > "This device can perform faster" referring to USB 2.0. USB transfer rate is very slow after this message. Any ideas?

  You must update the chipset drivers and this error will disappear :)

• Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?

  Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?

  Hello

  I suggest to refer to this link and follow the steps in this link and check if that helps:

  http://support.Microsoft.com/kb/943104

  It will be useful.

• Satellite Pro A60 PL: message: USB device can run faster

  Hello!

  I have a problem with the USB 2.0 drivers in my Satellite Pro A60 PL. everytime when I connect the message apear theres USB 2.0 device this device can run faster. What can I do about it?

  Hi guys

  I received the same message. It s not an error but a balloon tip Windows.
  I didn't find the reason for this message because my phone supports USB 2.0 ports too and I also connected a USB 2.0 compatible device.

  I've tired to remove the Device Manager, the controllers and the USB hubs and updated the Win XP operating system to the last State. I've also updated the driver chipset but sometimes (not always) this message again using a disc HARD 2.5 USB.

  I read in some professional computer magazines that this message is normal and it might appears with some SATA external USB hard drives. So you can ignore it.
  It s nothing serious.

  Greetings

• IBM Thinkpad message: 'this machine can run faster with the USB 2.0 hub.

  Original title: Thinkpad USB 2.0 Hub.

  Hello:

  I have an IBM Thinkpad T-21 which is under Ubuntu & Windows xp.  I primarily use Windows XP.  The pop-up that keeps occurring is "this machine can run faster with the USB 2.0 hub.  Can you tell me how to upgrade my USB 2.0 Hub?  Would like to know because I can't sync my Android phone with my computer until I do it. Thank you.

  Are you sure you copied this error message properly?  In other words, he says that the hub could perform better if connected to a USB 2.0 port?  As far as I can determine that the T21 is not come with a USB 2.0 port, even if you connect a USB 2.0 device (for example a hub), the unit will only race as fast as the port allows it.

  What is the brand and model of your terminal?

  It is possible that the message means the opposite (i.e., your computer has a USB 2.0 port, but the hub is only a USB 1.1 device).

  USB 2.0 was introduced in 2001, so if you bought your computer before 2001, it is likely that you use USB 1.1 or 1.0.

  Open the Device Manager (start > run > devmgmt.msc > OK)
  Expand the category of 'USB Bus controllers'.
  If you see the "Enhanced" work for one or more of the listed devices, you have a USB 2.0 port.  If you do not see "Enhanced", you have USB 1.1.

  

  If the problem is that the USB port on the computer is not 2.0, so your only solution is to buy a USB 2.0 PC Card adapter.  Example and example 2
  If the problem is that the hub is not 2.0, then you will need to buy a new hub.

• error message this device driver has stopped responding, but recovered. What can I do to fix this?

  HP G72-b60US notebook

  Windows 7 Edition 64-bit family

  Intel graphics card

  I play a game and it's going very well for 10 minutes, then screen wil go black and trying to "fight" to override the game to bring up the office. then an error message is displayed to tell the device driver is not responding but recovered. I'm trying to get back into the game, but it doesn't allow me not-screen remains black when I try to turn on or off. so I have to ctrl-alt-del to bring up the Task Manager to stop the game. Then, the computer and the graphics card works fine. I tried to see if the driver for the graphics card needs update but the CV Wizard and windows update tells me that everything is fine. Help?

  Thank you.

  Angie

  Hello

  A.

  Check that your laptop is overheating or not.

  To do this use HWMonitor (free and recommended).

  If it detects overheating, consult this guide.

  B.

  Update the Bios.

  The update of the Bios?

  
  

  Download the last update of the Bios here.

  Connect the power adapter to the netbook.

  Disconnect from the Internet. Close all running programs. Disable anti-virus and firewall.

  Double-click the Bios update exe file. It may take some time, so it is important to remain patient, not to interrupt the process. Allow the laptop to restart after applying the BIOS update.

  Although this update is running are not:

  • Turn off your laptop,
  • Disconnect the power adapter,
  • try to run any software or do anything thereon.

  Note:

  The Bios update process is always risky. You do this at your own risk.

  C.

  Update the graphics driver.

  Uninstall the Intel graphics driver.

  Resources:
  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  Download and install the latest driver from here.

• Receive an error message that Windows can not retrieve information about the disk when I try to put upgraded Windows XP to Windows 7.

  XP Home to Windows 7 upgrade Peoblems

  I can't update my laptop to windows 7, that he will enter the upgrade options, then it will say cannot retrieve information about this disk of computers. What should I do I deleted all leave them and still get this error. Thanks Chris

  It's a little late for this, but anytime you do an upgrade, you must be sure that your computer is compatible. My guess is your drive for windows 7 is a DVD and you have a CD or a witch of CD - RW drive can not read CD

  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

• MrtRate non Plug - and - Play driver displays the error message "this device is not working properly, or does not have all its drivers installed (Code 24)."

  Convenience store recommended remove and reinstall to resolve problems.  Cannot locate the driver using the Add Hardware Wizard to reinstall by troubleshooting tips.

  Do I need this driver for my Dell PC under Windows XP Home Edition SP 3 or if I can't ignore the deletion?

  If I need to reinstall the driver of mrtRate, where I can get it?

  Ganeles Hello death,

  Thank you for your message.  After studying this problem, it seems that it is caused by the Quicken software.  Click HERE and run through the troubleshooting process.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Error message "this font is already installed. You want to replace it.

  Original title: police is already installed Message ALWAYS (but is NOT)

  It is not SERIOUS what I'm trying to install the police even if I've NEVER seen people like her before, it could be just created and updated on the website today and when I install ANY font it says "this font is already installed. Do You Want to replace It? "even if it is NOT installed and it does not MATTER whether I say yes or no, the police does not install! and is NOT in the system fonts!

  Hi Justin,

  What browser do you use to visit Web sites?

  The problem can be solved by using the option of ignore the font styles specified on Web pages.

  Perform the following steps if you have Internet explore and see if it works.

  was: open Internet Explorer.

  b: then click on Tools > Internet Options > general tab

  c: Then click on the accessibility button

  d: mark "" ignore the font styles specified on Web pages".

  e: Click on apply > ok.

  Answer please if you have any questions.

• USB device can run faster

  Hi all

  I recently bought a USB-6008.  When I plug it into my PC, I get a message "this device can perform faster.  This USB device can perform faster if you connect it to a Hi-Speed USB 2.0 port.  For a list of available ports, click here. "When I click on the message, it shows me a list of available ports, but none of them seem not to be USB 2.0.

  All my USB ports are supposed to be USB 2.0.  It is an Asus P5N72 - T Premium mobo.  I have updated the bios, and made sure that USB 2.0 is selected in the bios Setup.  I use Win XP SP3.  According to the Microsoft Web site, there was a known problem with XP supporting USB 2.0 on Asus Motherboards, but that he was supposed to have been fixed in SP1.

  I realize that it is a matter of Windows probably more than a question of data acquisition, but I spent the entire afternoon on Microsoft, Asus and other sites.  Can anyone help?

  Thank you

  Ed

  
  

• Unable to play the game Age Of Empires II, you receive an error message "AppCrash.exe".

  Original title: program compatibility Application Applications Apps game games Legacy Crash accidents Application Hang hangs

  I want to play Age of Empire II...

  but it does not start...

  m make error appcrash...

  Please suggest solution for me...

  My Info system is as follows:

  System manufacturer: Alienware
  System model: M17xR3
  BIOS: InsydeH2O Version 1.0 A09
  Processor: Intel Core i7-2760QM CPU @ 2.40 GHz (8 CPUs), ~2.4GHz
  Memory: RAM 16384MB

  Operating system: Windows 7 Home Premium 64 - bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120830) - 0333

  Display:

  Card name: AMD Radeon HD 6970 M

  Hi Girish,

  Thanks for posting your query in Microsoft Community.

  According to the description of the problem, it seems that you are having problems with the game Age Of Empires II, you receive an error message "AppCrash.exe". I'll help you fix the problem.

  (1) what version of the game is installed on your computer?

  (2) did the problem started recently?

  (3) have you made changes on the computer before this problem?

  Step 1: Let me inform you that the game is not compatible with Windows 7.

  You can check the link below:

  http://www.microsoft.com/en-us/windows/compatibility/win7/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win7&Locale=en-us&TextSearch=Age%2Bof%2BEmpire%2BII&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  Step 2: If the version of Age of Empires II is not compatible, I suggest to install the program under Windows XP service pack 2 compatibility mode and check if that helps.

  Make older programs to run on the version of Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  I hope this helps. Try the above steps and get back to us for further assistance if you have questions about the Windows operating system. We will be happy to help you.