Receive the error "Windows has stopped working" after installing the update of security for Vista (KB977165)

Similar Questions

• I just download aa3 game without problem, uninitialized probs, but as soon as I start the game a window appears saying "error, windows has stopped working", what is wrong?

  I just download aa3 game without problem, uninitialized probs, but as soon as I start the game a window appears saying "error, windows has stopped working", what is happening, please help.

  Hello
   
  Follow the suggestions and see if it helps.
  Method 1
  You can check if the problem exists in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  Method 2
  If the problem persists, you can uninstall and reinstall the game.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  You can provide the event logs in Event Viewer.

  You can provide the exact error in the Event Viewer logs to find out what caused the problem.

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  You can also see the article for more information.
  The problems of the game performance
  http://Windows.Microsoft.com/en-us/Windows-Vista/fixing-game-performance-problems

• on dv6 fingerprint reader has stopped working after installing Norton 2012

  Fingerprint reader has stopped working after installing Norton Internet Security 2012 on both of my notebooks from HP.

  Product name: HP Pavilion dv6

  Operating system: Windows 7 64-bit

  Error message in Device Manager under biometric devices in Device Manager displays an exclamation mark beside validity sensors (WBF) (PID = 0018). The following message is under the general tab: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ».

  Driver is present and seems to be up-to-date.

  Appreciate your help.

  I have finally isolated the problem of my software lack of HP dv6 fingerprint reader. I think Norton Removal Tool, available online at www.symentec.com/nrt, was the reason. I am sure this conclusion because the exact same problem occurred after I installed Norton Internet Security 2012 on laptop HP same as my wife. I tried, in vain, to uninstall and reinstall the driver for the biometric fingerprint device provided by Validity Sensors, Inc.

  After spending a day and a half to try to "solve" the problem, I decided to restore my system and go back to the prior agreement of the point of the installation of Norton. Thank you HP to make this process quick and painless. Don't forget that if you installed anything after the restore point, it will have to be reinstalled.

  Fortunately, there's a less intrusive on CD of Norton removal tool. This utility uninstalls an older version of Norton you are requested to restart and then installs the latest NIS. It is a method of removal safer that wide brush offered by the Norton Online link, which wipes everything remotely suspect.

  After reinstalling Norton Internet Security 2012 from the CD, everything works as it should, including the fingerprint reader.

• Error 800719E4 when you install the update of security for Vista(KB972270/KB978207/KB951847)

  Hello

  I need help for error of update of address 3 for Vista security:

  (1) 800719E4 error during the installation of update of security for Vista (KB972270)
  (2) Cummaltive security for Internet rexplorer 7 Vista (KB978207)
  (3) Microsoft.NET Framework 3.5 service pack 1 and the .NET Framework 3.5 Family Update (KB951847) x 86

  Thank you

  See the section "How to get help", for example, http://support.microsoft.com/kb/972270

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Desktop Window Manager has stopped working after loading of updates 12/10/10 MS

  Once the download and installation of updates for Windows 12/10/10 patches, Desktop Window Manager has stopped working.  Event viewer lists under Applications:

  Name: Application
  Source: Application error
  Date: 2010-10-13 09:59:47
  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: has
  Description:
  The failing application name: Dwm.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc541
  The failed module name: nvwgf2umx.dll, version: 8.17.12.5922, time stamp: 0x4c5424d5
  Exception code: 0xc0000005
  Offset: 0x000000000007c160
  ID of the process failed: 0xb0c
  Start time of application vulnerabilities: 0x01cb6aefa117a51c
  The failing application path: C:\Windows\system32\Dwm.exe
  Path of the failing module: C:\Windows\system32\nvwgf2umx.dll
  Report ID: e6dfd048-d6e2-11df-9660-00271383b7fe

  The operating system is Win 7 x 64.  Video card is a Gigabyte GTS450OC1 with its latest driver running on an Intel DP55KG MB with 8 GB memory Corsair XMS3.  The system was fully functional and stable immediately before the update.  I don't know which of the 18 patches is in conflict with the nvwgf2umx.dll file.  Device Manager reports no hardware problem with any component.

  In my attempts to solve the problem, I run chkdsk f, sfc/scannow (which have reported no problem) and reloaded the video driver (without uninstall first).   Nothing works so far.  I even tried to defragment the master file with Diskeeper 2010 start time Table Defragger (based on another post, I've found), also without success.

  What is the reference for this?

  This may seem like the thing the more janky to post, but I got the same error several months:

  Problem event name: APPCRASH

  Application name: Dwm.exe

  Application version: 6.1.7600.16385

  Application timestamp: 4a5bc541

  Fault Module name: nvwgf2umx.dll

  Fault Module Version: 9.18.13.1422

  Timestamp of Module error: 51427a 68

  Exception code: c0000005

  Exception offset: 000000000013fe0b

  OS version: 6.1.7601.2.1.0.256.1

  Locale ID: 1033

  Additional information 1: bd9d

  More information 2: bd9dfb84ef7bbf0c089fd3d5f079469b

  Additional information 3: ec39

  Additional information 4: ec39233315f018bea3fd5d4de7e9458f
  And could not cancel the record/re-record the dll it error out on an entry point missing or whatever.
  So what for some reason any worked for me is to rename C:\Windows\System32\nvwgf2umx.dll to nvwgf2umx.dll.bak (all other copies of this file are in the folder DriverStore).
  After that, I ran from an administrator command prompt
  net stop uxsms
  net start uxsms
  
  
  And miraculously all started working again.  I'm running a GTX570 with latest drivers nvidia from Scripture.
  Note: You probably shouldn't be move/rename things in System32 unless you are confident and have your data backed up.  It worked for me, but who knows you.

• Desktop Window Manager has stopped working after installing Defender Pro 2012 5 in 1

  Hello

  My father has a Windows Vista. It works very well. Until we installed Defender Pro 2012 5 in 1,

  It was a bit slow... the screen flickers of its lights for a few seconds every 10 minutes, I get this... I already have contact Defender Pro, and they said that it was not their fault.

  Help, please!

  DESKTOP WINDOW MANAGER HAS STOPPED WORKING
  Windows can check online for a solution to the problem

  -> online and are looking for a solution (recommended)
  -> close

  APPCRASH
  Application name: Dwm.exe
  Application version: 6.0.6002.18005
  Application timestamp: 49e02696
  Fault Module name: ntdll.dll
  Fault Module Version: 6.0.6002.18327
  Timestamp of Module error: 4cb74dd3
  Exception code: 80000003
  Exception offset: 0000000000045f00
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033
  Additional information 1: 0fef
  More information 2: 0d8b4b37a0c1e529a7398b6615cc3528
  Additional information 3: f196
  Additional information 4: acf765d48a0657c8822f379a6b5f3b91

  Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Sorry to tell you,

  I already solved the problem.

  Just to let you know, I buy the product, because

  I used the free and they don't really work (IN MY OPINION).

  Anyone has this PROBLEM (appcrash)

  Go to start

  Click on Control Panel

  go to appearance and personalization

  Click on appearance color of windows.

  then click on settings in the appearance of progress.

  under the gaze of point for the theme of basic or something like that.

  Want more info on Dwm.exe?

  Click here-> http://www.howtogeek.com/howto/windows-vista/what-is-dwmexe-and-why-is-it-running/

• Satellite U300-130 - TosBtMng has stopped working after installing Nokia PC Suite

  I have the same problem too... with Toshiba Satellite U300-130.

  Bluetooth worked well enough before I installed the Nokia PC Suite for my mobile on my PC (new version 7.1.26.0 Web site).

  To be correct, as a first step, I even managed to maintain a connection between the PC and the Nokia Bluetooth and ran the synchronization of the contacts. I tried several times, but each time synchronization run ended with the message "PC couldn't get response from your Nokia.

  After the reboot, my PC went crazy and started broadcasting the message "TosBtMng has stopped working" and it restarted every time that I ask him to close.

  Installation of the new version of BT Stack (6.40) does not resolve this error.

  Help, please

  I also use Toshiba Satellite, I use this [suite Nokia pc | http://www.softsea.com/review/Nokia-PC-Suite.html] version

• Logitech TrackMan disables the update of security for Vista (KB973565)

  When I install the update of security KB973565 it disables my Logitech TrackMan (trackball) wireless and may not be re-connected thereafter. I can only restore the TrackMan to uninstall this update of Windows Vista. Can I use a wireless mouse Logitech after installation of the update, but not wireless TrackMan. Is it possible to fix this?
  Gordon

  [Is there a driver update available that you have not yet installed the TrackMan?]

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• My keyboard stops working after a random update. Œuvres for keyboard right up until I get to the password screen before entering Windows.

  After doing a windows update, my keyboard stops working.  I got a new keyboard, and the other does not.  I can press F2 at the splash screen and enter the establishment and the keyboard works then, but as soon as he comes to the sign on screen before moving on to windows, it does not work and I can't type my password.  So I can't even in the computer to solve anything!  How can I be me my keyboard to work or go beyond the password screen in order to check the drivers and understand the real problem?  Thanks much for any help you can offer!

  Hi BlondeMommy

  Welcome to the Microsoft Answers Forum!

  We would like to know

  ·         Who is the manufacturer of the keyboard?

  ·         What is a USB or a wireless keyboard?

  I recommend you to check the latest drivers for the keyboard and try these methods

  Method 1:

  Try to connect another keyboard and check if the keyboard is detected.

  Method 2:

  Restore the system to the date it was working fine the windows recovery mode

  i. put the Windows 7 installation disc in the disc drive, and then start the computer.

  II. press a key when you are prompted.

  III. Select a language, a time, a currency, a keyboard or an input method, and then click Next.

  IV. click repair your computer.

  v. click on the operating system you want to repair, and then click Next.

  VI. in the System Recovery Options dialog box, click System Restore

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• new faucet botton has stopped working after a few updates

  Hi, FireFox has had a few updates for IDM modules as usual, but after he (new tap botton) stopped working, even the new tap since the right-click option does not work, please help

  Uninstall the toolbar Ask and it should work again. There is a compatibility issue with the Ask and Firefox toolbar that prevents the opening of new tabs.

  There are a few places to check for the Ask toolbar:

  • Check the control panel Windows for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
  • Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

• Vista 'Open file location' has stop working after installing IE9 Beta

  My context option 'Open file location' has quit working on all the shortcut files (.lnk).  Choosing 'open file location' triggers WITHOUT ERRORS and seems to not trigger any increase in CPU activity, or I can't detect any change in process explorer, it's just nothing at all.  BUT it doesn't seem to work because he used for the FIRST time (and only the first time) I have choose it from a shortcut on the desktop after a reboot... as long as I do not first open all records.  PLEASE NOTE that this behavior only started in the morning, after I installed IE9 Beta on my computer.

  I use Vista Ultimate SP2 on a box of Dell, Intel Pentium D 3.00 Ghz with 3.5 GB of Ram.

  I rely heavily on "Open file location" to navigate through my system so that your help will be greatly appreciated.

  Here's the sumery of FileExtInfo.exe of my .lnk file associations:

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  Information of the file association [.] LNK file type]
  Page generated by FileExtInfo v2.0 on 20/09/2010 10:13:13

  FileExtInfo © 2005-2007 Ramesh Srinivasan.
  Homepage: http://www.winhelponline.com
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  [HKEY_CLASSES_ROOT\. LNK]
  @= "lnkfile".

  [HKEY_CLASSES_ROOT\. LNK\ShellEx]

  [HKEY_CLASSES_ROOT\. LNK\ShellEx\ {000214EE-0000-0000-C000-000000000046}]
  @= "{00021401-0000-0000-C000-000000000046}.

  [HKEY_CLASSES_ROOT\. LNK\ShellEx\ {000214F9-0000-0000-C000-000000000046}]
  @= "{00021401-0000-0000-C000-000000000046}.

  [HKEY_CLASSES_ROOT\. LNK\ShellEx\ {00021500-0000-0000-C000-000000000046}]
  @= "{00021401-0000-0000-C000-000000000046}.

  [HKEY_CLASSES_ROOT\. LNK\ShellEx\ {BB2E617C-0920-11d1-9A0B-00C04FC2D6C1}]
  @= "{00021401-0000-0000-C000-000000000046}.

  [HKEY_CLASSES_ROOT\. LNK\ShellNew]
  "Handler" = "{ceefea1b-3e29-4ef1-b34c-fec79c4f70af}".
  "IconPath" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00,------.
  74,00,25,00 5 C 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73,------.
  00,68,00,65,00, 6 c, 00, 6 c, 00, 33, 00, 32, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 2 c, 00, 2d, 00,------.
  31,00,36,00,37,00,36,00,39,00,00,00
  'ItemName"="@shell32.dll,-30397 '.
  'MenuText"="@shell32.dll,-30318 '.
  "NullFile"=""

  [HKEY_CLASSES_ROOT\. LNK\ShellNew\Config]
  "DontRename"=""

  [HKEY_CLASSES_ROOT\lnkfile]
  @= "Shortcut".
  "EditFlags" = DWORD: 00000001
  'FriendlyTypeName"="@shell32.dll,-4153 '.
  'IsShortcut '=' '
  "NeverShowExt"=""

  [HKEY_CLASSES_ROOT\lnkfile\CLSID]
  @= "{00021401-0000-0000-C000-000000000046}.

  [HKEY_CLASSES_ROOT\lnkfile\shellex]

  [HKEY_CLASSES_ROOT\lnkfile\shellex\ContextMenuHandlers]

  [HKEY_CLASSES_ROOT\lnkfile\shellex\ContextMenuHandlers\OpenContainingFolderMenu]
  @= "{37ea3a21-7493-4208-a011-7f9ea79ce9f5}".

  [HKEY_CLASSES_ROOT\lnkfile\shellex\ContextMenuHandlers\UltraSentry]
  @= "{8EBAD5CA-D4BF-44CF-84D8-C38B1464303D}".

  [HKEY_CLASSES_ROOT\lnkfile\shellex\ContextMenuHandlers\ {00021401-0000-0000-C000-000000000046}]
  @=""

  [HKEY_CLASSES_ROOT\lnkfile\shellex\DropHandler]
  @= "{00021401-0000-0000-C000-000000000046}.

  [HKEY_CLASSES_ROOT\lnkfile\shellex\IconHandler]
  @= "{00021401-0000-0000-C000-000000000046}.

  [HKEY_CLASSES_ROOT\lnkfile\shellex\PropertySheetHandlers]

  [HKEY_CLASSES_ROOT\lnkfile\shellex\PropertySheetHandlers\ShimLayer property page]
  @= "{513D916F-2A8E-4F51-AEAB-0CBC76FB1AF8}".

  [HKEY_CLASSES_ROOT\SystemFileAssociations\. LNK]
  "FileOperationPrompt"="prop:System.ItemType; System.FileOwner; System.Author; System.Title; System.Subject; System.Comment; System.DateModified; System.Link.TargetParsingPath ".
  "FullDetails"="prop:System.PropGroup.Description; System.ItemType ".

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\. LNK]

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\. LNK\OpenWithList]

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\. LNK\OpenWithProgids]
  "lnkfile" = hex (0): "."

  Thanks for the reply Martinez!

  1. sometimes for all the shortcuts in all folders, including the office.

  2. sometimes for shortcuts related to music files, JPGs, microsoft word files, exe files, and others.  The shortcuts are in several different directories.  It is worth noting that the target location listed in the properties files is correct exe programs will be running, and music or photo files will play/display double clicked.  Only problem is NO way to open the folder of file location of the shortcut target.

  Step 1: Permissions for all folders that I normally use are the same they have been for years, which includes the folders that contain the shortcuts and those containing targets.  They are: 1) the permissions of system-all verified.  (2) MyName (HOMEPC\MyName) - all verified permissions. (3) Directors (HOMEPC\Administrator) - checked everything except special permissions.  The exception being the 'Programmes' to root folder that has no permissions other than read, execute, and list.  Subfolders for individual programs have the same permissions as mentioned above for my usual records.

  Step 2: I uninstalled IE9 Beta and the location of the file open function has been restored as if by magic!  .Lnk file associations appear to be identical to what they were when that was the problem.  IE9 has maybe a bug or an incompatibility in this somewhere1?

  Thanks for your help... I'll check to see if it is what I do for IE9, like the speed increase!

• Sony motion eye cam on my sony vaio vgn-fe48g has stopped working after installing win7

  Please could someone help me to set up the Board Sony motion eye cam and FN keys that don't work after upgrading from Vista to Win7, Sony are no help at all.

  Device Manager can't even see the cam. I tried to install it manually and the nearest me am added the cam, I was able to start.

  Maybe you are missing the drivers. Are there drivers available for this W7?

  You should check with Sony for your specific model and area/region Web site to see if they provide any W7 drivers at all. If Yes, have you installed them for the web cam?

  EXAMPLE - this site is for the India, they have a few drivers for Vista HP 32 bit, but none that seems for W7 HP 32-bit. - http://www.sony.co.in/support/product/vgn-fe48g

  This is a missing driver for W7 then issue you might try to install drivers vista in compatibility mode, but this is not guaranteed and can cause other problems. Back up your data first to be safe. See http://www.sevenforums.com/tutorials/98073-drivers-install-vista-drivers-windows-7-a.html and you need the correct version of the pilot 32 or 64 bits depending on the case.

• Outlook stop working after you download Service Pack 2 for vista

  Auto Update for vista sp2 and now cannot open office outlook 2007.  Put just a message saying it cannot open Outlook.

  Hello Jon,

  Thank you for choosing Microsoft answers forums for Windows Vista.

  Please let us know the exact error code. It can be found in the windowsupdate.log file. Just click on start and in the search type windowsupdate.log box. Scroll down to the bottom of the window to check the error code.

  Apart from that, you can try the following:

  Step 1:
  
  Try to restore your computer to a time where it was working fine.

  It uses system restore to return your system files and settings to an earlier point in time, without affecting personal files, the restore points.

  For more information such as how to perform a system restore, you can follow the link below:

  http://windowshelp.Microsoft.com/Windows/en-us/help/517d3b8e-3379-46C1-B479-05b30d6fb3f01033.mspx#EI

  Step 2:
  
  Disable any security software or firewall. (Note: once the problem is resolved, you can activate it back)

  Step 3:

  Install the stand-alone package for Windows Vista service pack 2.

  Visit the link below to download the SP2:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en

  For your reference:

  How to obtain the latest Windows Vista service pack:

  http://support.Microsoft.com/kb/935791

  Kind regards

  Savan - Microsoft technical support.

• Explorer Windows has stopped working after the installation of svc. Pack 1 for Vista Home premium

  have the toshiba p205D-S8802 model. I am away from home and don't have my boot drive or my program files. I can send and receive e-mail and can browse the web. I can upload files to an external hard drive, but cannot recover in a normal way.

  Please answer all the questions of diagnostic following by number in your very next answer (no need to quote this post):

  1. what application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  2 to give application Norton or McAfee application ever been installed on this computer?

  3. do you have a free trial Norton or a McAfee free trial come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4. When did you install Vista SP1?

• Satellite P200 - Microphone has stopped working after installing Windows 7

  My Satellite P200 came with Vista Ultimate, the mic has worked for a few months, all of a sudden it stopped. I decided to install Windows 7, but the microphone still does not work.
  Any ideas anyone?

  I use this laptop for skpe my people a lot. I can use an external mic very well, but really want my only integrated works again.

  Hey Buddy,

  Sounds like there of something wrong with your installation of Windows 7 so the microphone doesn t work anymore...

  I recommend updating the driver of the webcam, because the microphone is a part of it. You can find updates driver here:
  http://EU.computers.Toshiba-Europe.com

  I put t know what Satellite P200 you have exactly, but if you can t find a driver Windows 7 for webcam, choose another model which is fully Windows 7 taken in charge, e.g. by Satellite P300.