Receive the error «your computer is not assigned a network address...» "often when I performed a Network Diagnostics

Similar Questions

• After the last Windows 7 Corel Draw update gives the error: your computer may not be connected to the internet

  After the last update of microsoft don't work plugin CorelDraw Whatthefont. Use corel capture. I can see only: your computer may not be connected to the internet or you may have a firewall installed that blocks access to the internet.

  We try on Windows 7 and Windows XP, the two are not working. In Corel forum have said, it's the beginning after the last microsoft update.

  Can solve you?

  Sorry for my English.

  Thanks, problem was in router (probably). During weekend router died, now we have new (same type) and it s working on two PCs.

• Error, your computer could not reboot after a unexpected, stuck on the black screen

  Original title: Vista startup repair freezes after that give the message "your computer could not restart" and he said that it is looking for problems. I use the original windows disc

  We had a power failure and the computer showed only a black screen.  When I rebooted it, she ran correct problems and they went to green the black screen with scrolling icon on the bottom, which freezes after 30 seconds or more.  I put in the original disc of Vista and ran the fix repairs.  He said it is looking for the most likely, but freezes with blue tab, stopping in the middle of the page.  any thoughts?

  Hello

  You get an error message or code?

  Method 1:

  First of all I suggest you to disconnect all devices external one except keyboard and mouse and try to start your computer and check.

  Method 2:

  Step 1:

  I also suggest you try to start the computer in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you're able to boot in safe mode, you can perform the system restore to the date when the computer was working fine and check.

  Step 2:

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Access the link below for more information on the Startup Repair:

  Startup Repair: frequently asked questions

  
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode-1

  Hope this helps and keep us informed if you need help.

• When I try to create or convert a PDF file in Acrobat DC I get the error "your request could not be performed. Adobe Acrobat DC license has expired or not been activated. "This will happen even if Acrobat is installed via a Customization Wizard

  When I try to create or convert a PDF file in Acrobat DC I get the error "your request could not be performed. Adobe Acrobat DC license has expired or not been activated. "This happens even if Acrobat is installed via a package of the Customization Wizard of the product which takes care of activation and the license is not expired. What could be the cause of the issue?

  Uninstall your creative cloud application that basically allows you to download apps and redownload it. This should do the job. Your system just lost you license update.

• Adobe Player/Flash receives the error notice that he not use 32-bit 64-bit

  problems when you try to view things through Adobe Player/Flash receives the error notice that it uses 32-bit 64-bit not, I try to follow the instructions how to fix problem with on any what success iohow to use

  Help please, problem with the Windows Vista, 64-bit computer.

  Whenever I want to display items through opinion of get Adobe Player/Flash that he not use 32 bits 64 bits, I try to follow the instructions.

  I'd appreciate it, step by step instructions how to solve the problem, cannot view images, videos, etc. via internet.

  Thank you

  Marty 720

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/babaa5f8-FF06-4EA2-aef6-a9416d65f981

  Read all the foregoing by PA bear MVP.

  See you soon.

  Mick Murphy - Microsoft partner

• Getting the error "your computer hardware should be upgraded" during the upgrade from Windows 7 to Windows 8. 1

  Hello

  I recently bought a DVD of Windows 8.1 and when I try to update my Windows 7 to Windows 8.1, I get error "your computer hardware must be upgraded. I have Dell Inspiron N5110 notebook with Windows 7 Home Premium 64 - bit Service Pack 1. The laptop is running on Dell BIOS A09. I did a google search for this error and found that I need to update my BIOS to version, but most of the reviews in said Internet Dell BIOS A11 running 'black screen' after being upgraded to Windows 8 or 8.1. How can I solve this problem to upgrade my laptop for Windows 8.1? Any help is greatly appreciated!
  I thank very you much in advance!
  Thank you
  Srini

  Contact Support latest Tech Dell to see if they have an update of the BIOS.

  http://support.Dell.com/

  Note: Have your number of practical service.

  Also before you upgrade do a backup of Windows 7 Image just in case the issue of the "black screen" is not resolved. The Image will allow you to restore Windows 7.

  EaseUS Todo Backup Home V6.1 http://www.todo-backup.com/
  Free version: http://www.todo-backup.com/products/home/free-backup-software-features.htm
  (Note: Todo Install, then create a diskette "emergency" before you start creating your first image backup)
  Version 6.1 supports XP, Vista, Windows 7, 8 and 8.1

  Acronis True Image 2014 - has a 30 day trial version available, trial key sent by email.
  Note: Initialization of cloning and the road (creating a MBR) are not supported in the trial version.
  For the trial version, only pick up is available when booting from a Bootable Acronis media.
  Install Acronis and then create a bootable media restoration/rescue CD before you start creating your first backup image
  http://www.Acronis.com/homecomputing/products/
  30-day trial: http://www.acronis.com/homecomputing/products/#tryorbuy
  True Image User Guides and documentation:
  http://www.Acronis.com/homecomputing/products/TrueImage/#resources
  2014 supports XP, Vista, Windows 7 and Windows 8

  J W Stuart: http://www.pagestart.com

• Unable to save the Page as that received the error "ga.js could not be saved, because the source file could not be read." Try again later or contact the server administrator.

  Unable to save the Page as that received the error "... ga.js could not be saved, because the impossible source file read try again later, or contact the server administrator.

  You have installed the Ghostery add-on or something similar?
  It can block Google analytic and .js file could not be read.

• I have Windows 7 boot receive the error - melesp.dll could not be found error message.

  I recently removed a Trojan horse (js/Medfos, js/seedabutor and win32/tracur) using a combination of Malwarebytes Anti Malware and Microsoft Forefront.   The two programs report successful removal of serious threats.   Now on startup, I get the error message:

  Users/shirley/AppData/Roaming/melesp.dll

  specified model is not found.

  I am running Windows 7 (64-bit) and Internet Explorer version 9 (9.0.8112.16421).

  Apart from this error at startup, everything seems to work OK.

  How can I fix or remove the error message?

  Thank you

  Shirley

  Hello Shirley,

  Thanks for posting your query in the Microsoft Community Forums.

  According to the description of the problem, I understand that you receive an error during the startup of Windows 7.

  Now let us perform some troubleshooting. All the steps in the same order as listed.

  Start the computer in safe mode and check if the problem persists, if the question does not persist then perform the clean boot and check if the problem resolves.

  Step 1

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed. Please click the below mentioned link.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2

  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  http://support.Microsoft.com/kb/929135

  Note: After completing the steps in the clean boot troubleshooting, follow step 3 from the link to start the computer to a Normal startupmode.

  It will be useful.

  Let us know if you encounter problems with Windows in the future. We will be happy to help you.

• "Receive the error message" operating system not found '.

  Original title: studio dell 1555

  account held a computer dell laptop but not initialize password is protected F2 and F12 works. screen says operating system not found help

  Hi Gary,.

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, you have problems with the computer not start.

  This problem can occur because of a hardware problem.

  Proceed as from the link below and check if that helps.

  "Operating system not found" or the "Missing operating system" error message when you start your Windows XP-based computer

  Warning: Be careful when you change the settings of the BIOS (Basic Input Output System). The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly. BIOS update should be made only if necessary (to solve a compatibility problem, for example). It can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.

  Meet us if you face problems with computer not start or any other issue of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• Fix the error your computer menu

  I have a Dell Inspiron 1525 and I tried to restore factory settings, however it is not letting me. It started when I recently updated windows, because on connecting to my office once it was finished, the vista Aero theme was gone, even in the menu dropdown. Kinda weird, but don't worry too much until I kept getting pop-ups and redirects, so apparently I had picked up a few conscious/malware along the way.

  I ran spybot, cleaned what she has, start AVG 2011 just make sure. AVG detects something immediately and guests to move it to the vault and I try, but it keeps encounters an error by. I restart my computer to see if it would be useful, and I noticed that the Aero theme is back, but not for long. Windows has encountered an error of a process host several times, and every time I ended the program when he went. Tried the Microsoft removal tool, once again, he finds something, cleaned. Then after running ad-aware for almost 7 hours in a row, he finds four things, cleaned up, those-, but the problem continues, as for pop-ups and redirects. I've finally had tired and didn't didn't have much important on the laptop, so I was going to restore the factory settings and cross my fingers.

  Then I stopped, booted up and press F8 at the start of Dell for the advanced boot menu screen. As soon as I hit enter to fix your computer, he met another mistake that I did not see before it loaded windows normally for some reason any. Then when the Vista Home screen came, my profile was gone, and there was just the empty box for 'user '. Again, are out, I rebooted, it's even less this error message, it just goes straight into the start menu advanced to start windows as usual when I try to access the repair menu. Started up a little while later and just let go on its own and the Vista of the screen, my profile was there all right, nothing has disappeared or changed AFAIK and boring and other redirects are still there.

  I've had this laptop used without the discs, so I don't know what I can do after running so many anti-virus scans and cannot restore the factory settings and with none of the discs. So tell me guys, this thing is just completely ransacked or is there another option another that spend hundreds of dollars for another drive in windows?

  From what you described, it is clear that your PC is infected with the virus. I suggest running online scanner:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Run a full scan, it is recommended to run in safe mode, but if you couldn't run in safe mode, run with both normal.

  Then clean the threats and restart your PC and if the problem persists, then contact Microsoft security support:

  http://supportservices.Microsoft.com/support/services/virus_malware_removal

• How can I get rid of the error "this computer is not running genuine windows? I feel I have tried everything.

  I tried several of the fixes discussed on mine, the problem of the popup saying "this computer is not running genuine windows". I'm tired and ready by using Microsoft. I bought this computer with windows installed in 2011 and about a month ago I got the error. When I look at the properties of my computer, it says windows is activated. Help please.

  As expected...

  I downloaded a file - sluicom64.zip - for my OneDrive to OneDrive Christmas

  Please download and save to your desktop.

  Right click on the saved file and select extract all...

  Save it in the default location

  This should create a file sluicom64.reg

  Right-click on the file and select Merge

  Accept the warnings, you should then get a 'Success' message

  Close all windows and restart.

  Run another MGADiag report and view the results.

• Receive the error message"you do not have new updates"

  Original title: update of THE

  Mr PRESIDENT, I did not upgrade update when I'm looking for the update is to show that "u is not new updations:

  Hey Sivan,

   
  1 have you set Windows to automatically install updates?

  2. were there any changes (hardware or software) made to the prior computer
  the question?

  3. When was the last time you had installed Windows updates?

  You can set Windows to automatically install important and recommended updates or to install important updates only. Important updates provide significant benefits, such as improved security and reliability. Recommended updates can address non-critical problems and help enhance your computing experience. Optional updates are not downloaded or installed automatically.

  It may be possible that your computer is up to date and there is no update is available to be installed.

   

  Windows Update: frequently asked Questions

  see (how can I find out what updates have been installed?)

  http://Windows.Microsoft.com/en-CA/Windows-8/Windows-Update-FAQ

   

  Please respond with the information required to help solve you the problem on that.

   

• I receive the error RE5DX9.exe - Ordinal not found after installing Resident evil 5.

  Original title: error message

  Hai I use windows 8 pro recently I installed resident evil 5 on my pc, I get an error ' "RE5DX9.exe - Ordinal not found." " Here is the error in the event viewer. The 5297 ordinal not found in the dynamic link library xlive.dll. "How to solve?

  Hi Adhithyaraja,

  I suggest that take you a look at the existing thread resident evil 5 in xboxlive.dll the ordinal not found error that describes exactly the same problem and a possible solution (RyanT response - Support Engineer, October 5, 2009).

  Hope this helps and solves your problem. If Yes please mark your post as answered if this can help others in the community - thanks in advance.

  See you soon,.

  LZ.

• Event ID 1001 DHCP computer was not assign a network address

  Unreliable Internet connection.  Like event log below.  Any ideas?

  Your computer not was not assigned an address from the network (by the DHCP server) for the network card with network address xxx.  The following error occurred: 0 x 79. Your computer will continue to try and obtain an address on its own from the server network address (DHCP).

  Log name: Microsoft-Windows-Dhcp-Client/Admin

  Source: Microsoft-Windows-Dhcp-Client

  Date: 28/04/2011 09:04:15

  Event ID: 1001

  Task category: State of Configuration address event

  Level: error

  Keywords:

  User: LOCAL SERVICE

  Computer: John-Netbook

  Description:

  Your computer not was not assigned an address from the network (by the DHCP server) for the network card with network address xxx.  The following error occurred: 0 x 79. Your computer will continue to try and obtain an address on its own from the server network address (DHCP).

  The event XML:

    

      

      1001

      0

      2

      3

      75

      0 x 4000000000000000

      

      1187

      

      

      Microsoft-Windows-Dhcp-Client/Admin

      John-Netbook

    

    

      6

      70F1A13DE4FC

      121

    

  I solved the same problem by disabling my connection #2 wireless network adapter (Microsoft Virtual WiFi Miniport Adapter).  I found this by comparing the MAC address listed in the error message with the release of CMD > ipconfig/all.  Noticed that this adapter is continually attempted to communicate with my DHCP server, and I was not still use it.

• Getting the error "this file does not have a program associated with it for performing this action" when choosing "open with" from the context menu on any type of file

  I get this error since I uninstalled an application called DriverCure. Now when I choose 'open with' any type of file I get this error this is really boring, I also tried reinstalling the app and also do a system file check, but it was of no use.

  Hello

  Thanks for posting your query in the Microsoft Community Forums.

  According to the description provided, I understand that you are unable to open any type of file on the Windows 7 computer. I will certainly help you in this regard.

  You can deal with these issues, if the file is corrupted. I would refer you o suggest the help article and run the Fixit tool.

  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program

  http://support.Microsoft.com/kb/950505

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Back to us for any problem related to Windows. We will be happy to help you. We at Microsoft try to provide our customers the best experience.