Receive the message 'the required in the INF section' what install Epson SX115
I try to install my epson SX115 but the scanner will not install the drivers I just get "section in the inf file" Please help
I'm sorry but I don't know more easy anyway. You have already uninstalled/reinstalled. Make sure you empty your temporary files after uninstallation and before reinstalling. CCleaner is a good tool to use for this - just don't use anythingexcept the cleaning part inside. Let alone register and advanced tools. The only alternative to those (or patch) is to talk to Epson tech support. I'm sorry that I wasn't able to help you. MS - MVP - Elephant Boy computers - don't panic!
Tags: Windows
Similar Questions
-
Received the Error 1606 when installing a Java plug-in
I tried to install a Java plug-in, but an error message came up saying "could not access network location %appdata%\.
I tried to use regedit to fix, but it won't work. I don't know where in the network no they do not find.
Try running this Fixit:
http://support.Microsoft.com/kb/886549
These are the works for Java as well.
-
Error message "a required CD/DVD driver is missing" - install Windows7 via USB
So I recently built a new office because my laptop fried itself, and I ran into the famous message "drver cd/dvd required is missing." I tried many solutions to internet: change SATA AHCI, ATA, IDE; starting with only the hard drive; and the solution that works for 95% of the population: pulling out the USB and insert into another port to the Welcome screen.
Nothing has worked. I have downloaded the drivers for my motherboard out of their Web site, uncompressed them and put the files on the USB key. The drivers are not yet recognised because they don't show up in the "Scanning for drivers.
I used the tool Windows 7 USB Installation and WinToFlash to make the USB bootable, nor work. I have my USB drive plugged into a port DAC - UP, because I read that Windows 7 is not supported with native support for USB3.0.
Please help me!
Well, I just fixed this problem. I found a Youtube video on this specific issue, and he said that the non-existent USB3.0 support was to blame.
I followed the video, mounted the USB3.0 drivers to the boot.wim and booted up my office as usual. This time, he spent the error message and let me install Windows.
I am so happy.
EDIT:
Video link for anyone else having this problem
https://www.YouTube.com/watch?v=yd37BJwTxiM
-
Hi people,
We have a device driver (* .inf) to our application that is added to our distribution , we create in CVI. In the past we did copy the *.inf in the
/dossier inf directly (using the distribution Installer "files"-Tab ""). Recently, we have followed the guidelines described in "Using LabWindows/CVI to install your device .inf files.
So we have now chosen a significant subdirectory of our application as the destination folder for the file *.inf instead of directly copy in the system directory.
Everything works well (besides the fact that our driver has no signature and needs user interaction), while using Windows XP.
DIFxApp (run MsiProcessDrivers) recognizes the *.inf file and installs the device driver.
After completing successfully the setup.exe, the specified *.inf has been duplicated as oem*.inf/pnf under
/INF. But under Windows 7 the *.inf is not installed. I ran "setup.exe/l * v" for the information of the installation log file.
And I found this article:
MSI (s) (8:9 C) [13:56:41:043]: jumping action: MsiProcessDrivers (the condition is false)
Of course the step of installing the drivers is ignored.Choose the
/INF in the folder target to the *.inf (which does not work on Windows XP) everything works fine. Does anyone know why MsiProcessDrives is ignored in Windows 7? It is always ignored or I do something wrong?
Help is appreciated!
Thank you!
Philipp
PS. : The device driver *.inf was written for several OS (XP, Vista, Win7) target according to Microsoft guidelines for this. So it of a universal *.inf file and can be used in each operating system from XP to Win7.
Good,
I solved the problem myself.
The problem is related to the DIFxApp.dll , which is available as 32-bit and 64-bit version.
In my case, I created the distribution as the 32-bit version. That's why 32-Bit DIFxApp.dll is merged into the MSI file that is not compatible with Windows 7 (64-bit).
This is why NOR added to this CustomAction Condition (NOT VersionNT64) for MsiProcessDrivers, which is perfectly adapted to the species but of by not having is not the *.inf file
installed in Win7. I guess the distribution building like Release64 it will use the 64-bit Version of DIFxApp.dll. I'm not able to verify that (still works on XP).
But then it will probably crash on XP.
But anyway. We have a distribution for the two BONES.
Quick & dirty solution I figured out:
-Edit-> files distribution: Add the *.inf file to C:\window\inf
-Manually add VersionNt64 condition in the resulting MSI file under component ->
(you can use the ORCA editor for this) So now, in the case of XP, the *.inf file gets installed by DIFxApp.dll.
Windows 7 using the *.inf is copied directly in the windows/inf folder and installs automatically the first time that the device is connected.
I guess you can merge DIFxApp.dll (32 bit) and DIFxApp.dll (64-bit) to the MSI and manage things together, create conditions. But it is not quickly implemented. At least for me is not...
Regards Philipp
-
The LifeCam Cinema hardware installation error
Tried to install Lifecam Cinema 3.0 but keep on receiving an error message "Required line was not found in the INF" - OS is Vista Home premium editionLifeCam installed on my laptop XP
Hi seuss460,
LifeCam software version 3.2 is available; Make sure you install the correct software for your hardware.
You can download software LifeCam here
Step 1: You can follow the steps mentioned in the article below
Troubleshoot installation of Intellipoint and IntelliType LifeCam software
http://support.Microsoft.com/kb/953691
Step 2: See also the steps mentioned in the article below
Troubleshoot failures to find the new LifeCam hardware
http://support.Microsoft.com/kb/929087
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
When I try to access the content requiring silverlight I receive a message to install silverlight.
When I try to install silverlight, I get a message that it is already installed. In my view, it is already installed, but not working properly.
Thank you.
Original title: silverlight help?
Hello
1. have there been recent changes to the system before the show?
2. when exactly you get this error message?
3. what Web browser do you use?
4. do you get this error when you use Internet Explorer?
Please provide more information on the issue to help you best.
I also suggest you to post here:
Silverlight .NET forums
http://forums.Silverlight.NET/search -
I received a message on my email that my live hotmail is about to be eliminated, and information is required and click on the back with my information. True or phishing?
Hello
This is a phishing scam.
Don
-
Hello
I received the following message when you try to install Photoshop CC, "you run an operating system that Photoshop no longer supports. See the system requirements for a complete list of the supported platforms. »
I use Windows Vista so not sure what to do now! Any help would be greatly appreciated thanks.
CC of Photoshop only works on Windows 7 or Windows 8/8.1. No Vista.
-
Original title: Problems installing Trend Micro 2012
Tried to install Trend micro on my laptop, and towards the end of this way the message; "Your computer meets all the installation requirements, so the installer must stop." appeared. He then read "Windows update," I clicked on the link and also called microsoft who gave me the link updates from SP1 to SP2. I did (ran for almost 2 hours!) and recorded. I then checked the edition of windows under system and it has not saved the update even if it is registered and installed to my files. Tried to do the foregoing twice, still the same problem. Rang Dell and they sought to find an answer to the problem, but did everything they could. Still no answer to the problem after all. I have Windows Vista Home Basic as my operating system and installed Trend micro in the past with no problems. (Not sure if the following has nothing to do with it, but thought it might be useful a mention). I changed to Microsoft Office 2007, which has already been installed on my laptop for Office 2003, because I found it difficult from the laptop to the desktop and I didn't really want to pay for the upgrade of my office, if I didn't need it.
Hello
You need to install Trend Micro Titanium 2012 Vista SP2 or later version
See this: http://support.antivirus.co.UK/trendmicro/kbresolution.jsp?Hmid=53756&ServiceId=51&ApplicationId=345
I suggest you follow these methods and check.
Determine if SP2 has been installed or not?
To see if the update has been installed, review the installation history
To view the history of installation, follow these steps:
a. click Start, point to all programsand then click Windows Update or Microsoft Update.
b. click view update history.
c. find the latest entry for the specific update.
d. If the entry shows the success in the status column, the update has been installed. If it says pending in the status column, the update is not installed.
Post back with the history state of Windows update, mistakes, if there is.
If the update is successful, if it does not show in system properties run System File Checker tool.
To do this, follow the steps in this link:
Follow the steps in this link: http://support.Microsoft.com/kb/929833
In the meantime, you can check this link for the required components, that you must take to install the Vista SP2. Learn how to install Windows Vista Service Pack 2 (SP2)
Also these return these items:Troubleshoot installing or uninstalling programs
http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-installing-or-uninstalling-programs
How to solve problems when you install or uninstall programs on a Windows computer
http://support.microsoft.com/kb/2438651
I hope this helps!
-
Hi all
I hope there, can someone help me with a Lightroom/Photoshop small but annoying issue. (I saw a similar post on the subject here, but it was for an earlier version of Photoshop Camera Raw and the answers did not help me).
Whenever I choose to edit in > Photoshop in Lightroom to edit a file I get the message error "this version of Lightroom may require plug-ins verson Raw Photoshop Camera 9.3 for full compatibility. Now, I know that I can get Lightroom to make the file or hit continue and that he either will get the job done. But I want to the difficulty of what is the cause. I'm on a Mac OSX Yosemite 10.10.5, I have Lightroom 6.3 (known as camera Raw 9.3 in the section about Lightroom) and I use Photoshop CS6 13.0.6 x 64. I tried to click on help > update in Lightroom and Photoshop, but this has not solved the problem. I tried following the instructions on the Adobe Web site to manually update the Camera Raw plugin that is supposed to be located at (from memory) (root folder) library > Application Support > Adobe > Plugins, but I don't have a Plugins folder (and yes I'm looking in the library under the root folder (, not under my user name).
Advice!
Camera Raw 9.1.1 is the LATEST version which is compatible with Photoshop CS6. You will not be able to update to 9.3. In addition, Lightroom now up to version 6.6. See the note in this article
-
Original title: Plustek OpticBook 3600 is not installed
Found new hardware wizard runs, but after scanning stops the disc from the manufacturer with the message ' year error occurred during the installation of the device.» The required section was not found in the INF"
PC system is homebuild which, in theory, exceed the minimum requirements of the system of manufacturers. Operating system is Windows XP Pro with Service Pack 3. The scanner is connected to the USB 2.0 card that is not separately powered, but installed in the PCI slot. I suspect that the problem lies in the PC rather than the scanner. but do not know what the problem is. Any help would be appreciated!
Hello
You can try the troubleshooting provided in the link below steps to fix the problem.You receive a "unable to install this hardware" or "an error has occurred during installation" error message when you try to install a PCI device
http://support.Microsoft.com/kb/841567
Note:
To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756
See also:
Error message: cannot install hardware. An error occurred during the Installation of the device
-
The required line not found in the INF.
I tried to install a webcam Logitech QuickCam® Communicate STX (x 64 compatible Vista) on my new Vista SP2 Home Premium 64 x machine. I received the following message is displayed after the installation of the material: "the required line was not found in the file INF." it does not say what the "required" line is just that it is not found. I downloaded the latest Logitech drivers, and it's the same thing. After much research and attempts to solve the problem with the advice of the Logitech, Microsoft, anyone frome one search on Google that had a suggestion, I bought a "LifeCam Cinema" model number 1393 brought home and follow-up instructions instalation - same as before. I downloaded the latestest microsoft drivers, uninstalled "LifeCam" then installed the latest drivers. The same thing happened again. Is someone can you please tell me what the "required" line is to. It seems not to be in any installation downloads.
Thanks for your suggestions.Hi geojayhwak,
Post here your number for this logitech webcam p/n.If you do not now where you can find it check this document: find the part number, model number and product code on your QuickCam Communicate STX
If you want to say thanks to someone just click on Vote as useful (i.e. under each avatar of the user).
If your issue is resolved, please indicate then your wire is with solution.
-
Updating NVIDIA, I received a message that my browser (Firefox) was corrupt and that I had to do my default browser Internet Explorer with Google as a search engine. I had many major problems with software advertising, viruses etc since I updated FF 2 days. Firefox was hacked? I reported these problems and give all the details in the last days, you can find them if check you email from this account (Stephenwolf) or +. +++ @hotmail.com. Go now will contact again later today.
public email Edition and robots to spammers. You should get an email when there are answers.
I hope that your update was not one of those sites that run misleading ads on the search engines for packages of shit... but it sounds really like your Firefox is not clean yet. Here's my method to track down and clean the bad Add - ons and other hijackers. I know it seems long, but it's not so bad.
(1) open the Control Panel, uninstall a program. After the loading of the list, click on the column heading "installed on" to group infections, I mean additions by date. This can help the undisclosed items bundle smoker who snuck out with some software, you have agreed to install. Beware of everything that you don't recognize / remember, since malware often uses sounding names important or innocent to discourage you remove. Out as much garbage as possible here.
(2) open Firefox page modules using either:
- CTRL + SHIFT + a
- "3-bar" menu button (or tools) > Add-ons
- in the Windows "Run" dialog box, type or paste
firefox.exe "about:addons"
In the left column, click on Plugins. Set essential and unrecognized plugins 'never enable '.
In the left column, click Extensions. Then, in case of doubt, disable (or delete, if possible) not recognized and unwanted extensions. Remember that all extensions are optional, none come with Firefox.
Often, a link will appear above at least an extension disabled to restart Firefox. You can complete your work on the tab and click one of the links in the last step.
Any improvement?
(3) you can search the rest of problems with scanning/cleaning tools listed in our technical support article: Troubleshooting Firefox problems caused by malware. These scanners on request are free and take a long time to run. If they end quickly, especially if they require the payment you have a serious infection. I suggest the specialty forums listed in the article in this case.
Success?
Then we can work on the restoration of your normal settings.
-
Receives the Message "the specified domain does not exist or could not be contacted" when starting
I was working on my machine, normally the day before and I shut it down properly - everything was fine. I'm confused as to what happened between the stopping and starting of the next day!
After you receive this message, he asks me my password for the account of one on my machine. I've never set up a password.
I have tried rebooting several times and it gives me the same message.
I started to run diagnostics, but he appeared to get hooked on a memory test.
Any ideas on how to pass this message/fix, it would be appreciated!
Your system appears to have been related to a field. After that, it requires a reboot to take effect. Once you restarted so he invites to connect to the domain.
There are always local accounts on your computer that allows you to open a session, but they will have a password for all accounts if your system is connected to a domain (as it is a requirement). To log on by using a local account, choose the name of your computer in the ' log on: "drop-down at the login prompt. You will need to know the valid username and password for this computer. If you or someone you know has an account in the domain that is joined to your system, allow you to logon to the domain by providing the valid domain user name and password.
Once logged on you can undo your computer from the domain (right click on the computer in the start menu, properties, advanced system settings, change the computer name, select workgroup and type workgroup name. Click Ok.) You will need the necessary permissions to perform this task.
If you are unable to go further, because you don't have a valid login, you can reinstall Windows. If you format your drive when you re-install you will lose all data on this disc. So if you need all the files from the drive, and you go this route, make a backup first!
-
Receive error message, not allowed to enter the Cookies files in Vista
When I go to Cookies, computer says I'm not allowed to this file... Why is this... I try to keep my cookies for a minum and do not want to use delete temporary files and cookies... because it removes all cookies and I have to sign on some new web pages... can you help me thanks
Hello
Cookies: Frequently asked questions
http://windowshelp.Microsoft.com/Windows/en-us/help/c9daa36b-3bc0-47fa-aea1-5a250e2b4e561033.mspxHow to allow or block Cookies in Internet Explorer for Vistahttp://www.vistax64.com/tutorials/60641-cookies.html
Block or allow cookies
http://windowshelp.Microsoft.com/Windows/en-us/help/ff035adb-411D-40F3-8F9F-23e158f7b8be1033.mspx
Cookie Viewer - free
http://www.KarenWare.com/PowerTools/ptcookie.aspCCleaner - free (allows you to protect specific cookies from deletion by CCleaner.)
http://www.CCleaner.com/======================================================
Here are some easy ways to Take Ownership and Grant Full Admin Control
Add 'Ownership' to the Menu Popup Explorer in Windows 7 or Vista
http://www.howtogeek.com/HOWTO/Windows-Vista/add-take-ownership-to-Explorer-right-click-menu-in-Vista/How to add appropriate to the context Menu in Vista
http://www.Vistax64.com/tutorials/112795-context-menu-take-ownership.htmlTake and Grant Full Control permissions and ownership in Windows 7 or Vista right click Menu
http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-Windows-7-or-Vista-right-click-menu/--------------------------------------------------------------------------------------------
How to take possession of an item in Vista
http://www.Vistax64.com/tutorials/67717-take-ownership-file.htmlHow to change the permissions on the folders
http://www.Vistax64.com/tutorials/157304-folder-permissions.html===================================================
From a post by Rehman F.
Here are the steps to change the ownership and permissions of files and folders:
1. right click on the file or folder, click Properties, and then click the Security tab.
2. click on advanced and then click the owner tab.
3. click on edit and then do one of the following:
· To change the owner to a user or group that is not listed, click other users and groups, and in the box type
the object name to select (examples), type the name of the user or group, and then click OK.· To change the owner to a user or a group is listed in the change owner to box, click the new owner.
4. If you want to take ownership of the contents of the folder, select the replace the owner of sub containers and objects check box.
5. click OK and then click Yes when you receive the following message is displayed:
You are not allowed to read the contents of directory folder name. You want to replace the directory
permissions with permissions granting you full control?All permissions will be replaced if you click Yes.
Note folder_name is the name of the folder you want to take charge.
6. click on OK and then reapply the permissions and security settings that you want for the folder and its contents.
Additional considerations
7· An administrator can take ownership of any file on the computer.
8· Affecting the ownership of a file or a folder might require that raise you your permissions using user access control
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
Maybe you are looking for
-
WiFi unstable and slow Internet high speed
Hello world: Recently, I am facing a problem of unstable wifi, slow speed of the internet of my macbook pro. I hope someone could help me with my problem. Symptom: Internet mainly speed just unstable using a wifi connection. (no problem with wifi con
-
Qosmio X 770-10 G: built-in Microphoe is not detected by viso cam
Hell, I just tried to use Skype and use the integrated camera and microphoen who are original of the 770 10 G X parts. The camera is OK but the microphoen is not detected at all.I do not see in the control panel windows harware and he is not on the N
-
Voice command using bluetooth, when the phone is locked?
I am triggering the voice command using the bluetooth headset when my phone is locked. This happens, the only way is to unlock the phone using the slider and drawn the boss. It's kind of irritating, like one can do this fundamental task in all other
-
When I download XP Service Pack 3, I lose all internet connections.
Whenever I download XP SP 3, my Internet connection fails, the only way to solve the problem is to uninstall XP SP 3 why?
-
TOUCHSMART HP ENVY 15-J184NA: update wifi TOUCHSMART HP ENVY 15-J184NA
Product name: HP ENVY 15 Notebook PC TSProduct number: J1Y23EA #ABU I recently bought the notebook above, I want to upgrade the ac dual band wifi card. I noticed a lot of posts on the issue of the white list, so if someone could suggest this as the c