received email does not display the exact time

My computer is a Microsoft windows XP version 2002.  I use Enternet Explorer Windows to my email.  The problem I have is when I get e-mail, time showing when it was sent is not the exact time.  This happens on all the emails that I receive.  For example, if I received and email this morning the date would be today, but the time to show it was sent at 14:45.  I tried to go to the toolbar to adjust the date/time.  Date and time are correct on my computer.  I don't know where else to look at in order to remedy the situation.  Unfortunately, I only have basic info when it comes to solve a problem on my pc.

Hello pinnaclelil,

Thank you for visiting the Microsoft answers community.

·         Is - this problem within an application on your system (outlook, outlook express, etc.), or a web-based E-mail (hotmail, gmail, etc.)?

o If you use web-based e-mail, go to the options in your account to check your time zone settings, otherwise follow the steps below.

·         This problem occurs with all received mail, or just a sender?

o If it is a question of a sender:

§ The sender to verify the time and time zone on the system settings.

o If there is a problem with all the mail receipts.

First, § lets go ahead and check your settings again.

§ Double-click on the time located in the taskbar. Check your time and date to ensure that they are configured correctly.

§ Click the time zone tab. Make sure you have your correct time zone selected.

§ Click OK.

§ Then, the mail time server is set incorrectly. In this case, you will need to take a look on the headers of messages in order to determine if this is the case. If it is established that the mail server is configured incorrectly, you must contact the owner of the mail server to correctly set it up.

Hope this helps

Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • calendar-clock does not retain the exact time when the computer is turned off

    original title: calendar-clock

    Clock only works when the computer is turned on.  It does not update the time.

    date does not update also. It is a program in windows vista.

    The year stay as the exact year, or back to a previous year, after restarting the computer?

    If the above applies:

    You probably have a failed in your motherboard CMOS battery.

    It's a battery power supply NET, size piece that keeps your system settings when your computer is off.

    They cost about $5 to replace.

    http://www.computerhope.com/issues/ch000239.htm

    How to replace the CMOS battery in the above link info.

    See you soon.

    Mick Murphy - Microsoft partner

  • yahoo email does not display the images on certain messages

    I have a MacBook Air, OS 10.11.3.  In the yahoo email, Safari and only in some emails images will not appear.  It confuses me because some emails are so perfect in others the images does not appear.  All emails from yahoo are received perfectly on the iPhone and my MacBook Pro, but not on the MacBook Air.

    Try to update on 10.11.5 and see if there is a change in behavior.

  • Weather gadget does not display the correct time

    original title: WINDOWS 7 HOME PREMIUM, IE9 IMAP WEATHER DESKTOP GADGET

    This gadget not only did not recognize established cities, but the climate is always a week behind, which gives suggestions out there in the strange world of the nothingness of the technology gone bonkers, invasive and just plan to update every 4 hours!

    Hello

    Please uninstall and reinstall the weather gadget and check.

    Check out the links.

    http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

    http://Windows.Microsoft.com/en-us/Windows7/install-a-program

  • The clock on my new HP P7-1020 with Windows 7, AMD Phenom II 960 t does not observe the exact time.

    I set my clock and it keeps for a few hours and then starts to lose time.  Normally, it's time, it's fake.  Currently, he lost three hours.  The minutes are correct.   Any thoughts on a solution?

    See the following link for the solution in this regard:

    http://support.HP.com/us-en/document/c01853713

  • Windows does not display the CD-ROM drive

    A week ago, my computer stopped showing me an icon for my DVD player. When I go into the Device Manager there is no option for CD/DVD players. I tried Microsoft Fix It, and he told me that there is no CD drive. I can not re - install a driver because the Device Manager does not display the CD players.

    I did not major changes to my computer I know so I can't imagine what the problem is. Help?

    Trevor

    Hello

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ==========================================================

    After the foregoing:

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • My firefox does not display the icon fonts!

    I use fontello.com for my web design project. But recently it does not display the icon.

    and the strange thing is that its OK my Firefox friends and just my PC have the problem.

    for example, this page shows icon on my friends firefox but I can't see the icons
    https://DL.dropboxusercontent.com/u/28793409/fontello-d3b0f38a/demo.html

    That's what I see
    https://DL.dropboxusercontent.com/u/28793409/shot.jpg

    If Safe Mode is good, the more likely culprits are one of your extensions or incompatibility of the graphics driver. To work around the second question, you can disable use of the hardware acceleration Firefox to see if that helps.

    "3-bar" menu button (or tools) > Options > advanced

    In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

    It takes effect the next time you exit and restart Firefox.

  • After installation or upgrade to Firefox 31, starting Firefox does not display the home page, personalize displays a blank page and the radio button does not work

    I am the admin of Windows for a University Department and install PC with Firefox all the time. This problem does not occur with every PC I would maintain, only a selection bit (model different laptops with Windows and update 1 8.1.) Until today, it has happened with the new user (with admin rights) accounts that I place on laptops for our staff. Today, this happened with the account administrator while setting up a new laptop. In all cases so far, I have install Windows from a registered image that was created by using sysprep.

    I tried many suggestions to reset Firefox, removing the profile of Firefox users, removing the Windows profile users, uninstalling/reinstalling Firefox, uninstall/reinstall of Firefox and the latest Java, but nothing helped. After uninstalling, I run an application to delete the caches and temporary files and even remove manually the keys to register HKLM\SOFTWARE\Mozilla and HKCU\SOFTWARE\Mozilla. I restart and make sure that the installation folder is deleted after uninstalling.

    Results are the same: after installing Firefox 31, the initial settings for migration, IE or Chrome pop up and after having clicked on the button finish, Firefox starts but does not display the home page of the new user, only a blank page. By clicking on the Options (3 bars) button does nothing. Right click in the appropriate box, the shortcut menu appears, so I can choose to customize, but which opens another tab with subject: Customize the URL and the page is blank. In the right click context menu, I can activate the menu bar and get options from that.

    My last attempt helped a little. I uninstalled Firefox 31, cleaned, removed the profile user Firefox, rebooted and then installed Firefox 30. Initial start-up runs and tells me that I'm not up-to-date and the works of button Options. But I can't always customize.

    Then I upgraded to Firefox 31, but then it's back to no start page, no options button and no customization. I can go down to 30 and get customize practically works again.

    Addon only is for McAfee Scriptscan to Firefox 15.1.0, just after installation is disabled.

    Any help would be appreciated. Thank you.

    You can try a different theme of Windows?

    Have you tried to start the computer using Windows safe?

    Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.

  • When I open a link in a new window does not display the web address.

    When I open a link in a new window does not display the web address. What have I done wrong? It used to work and it works if I open the link in a new tab, the problem is that I hate to use tabs prefer a new window every time... Help!

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • The Task Manager does not display the process and tabs, even if the menu can be seen.

    Dear community, I had a serious problem on my task manager. It does not display the process and tabs, although the menu is visible. Also, any time I open a program or system of adjustment, some and especially no option can be seen since there is no specified words.

    Here is a link that you can see a screenshot on my problem.

    http://kepfeltoltes.Hu/121231/592911021Untitled_www.kepfeltoltes.hu_.PNG

    Thanks in advance for your help

    Original title: Task Manager problem

    I managed to solve the problem by looking for alternatives. Apparently, the problem was caused by a dat file (C:\windows\system32 folder called FNTCACHE.) (DAT) I deleted and it worked like a magic. Everything was normal again.
    Deleted it and the work of all the graphical interfaces as it should.

    Thanks for your answer, in any case. I just post the solution here if someone ever faced with such a question in the future.

    Kind regards
    Laszlo

  • Is it possible to display the dynamic value in the ToolTip? I tried: this.assist.toolTip.value = this.rawValue; for a text field 'property MouseEnter', but it does not display the current raw value. It displays a previous raw value of the field... Guilty

    Is it possible to display the dynamic value in the ToolTip?

    I tried:

    this.assist.toolTip.value = this.rawValue; for a text field on 'ownership' MouseEnter

    but it does not display the current raw value. It displays a previous raw value of the field...

    I wrote 'YYYY', but is not displaying on the first mouseEnter event

    Capture_1.JPG

    When I show event mouseEnter for the 2nd time it gives good value.

    Capture_2.JPG

    Now, I changed the "BBBB" value but the first mouseEnter event it displays the value previous i.e. "YYYY."

    Capture_3.JPG

    I found the solution. I wrote the script ("this.assist.toolTip.value = this.rawValue ;") on 'property MouseEnter' but the need to write the script to the "Output" of the field event. ")

    Thank you.

  • Firefox does not display the changes on the site after the remote host; Refresh does not work

    I recently had to reinstall Windows 7 on my machine, and since it has been wiped off I installed CS5, reconfigured my Dreamweaver site and made changes to our page index.html (so far).  After you put the files on my remote server, I noticed that Firefox does not display the changes I made to this file - it is to show the page previously recorded on my CS4 version.  Thinking it was a cache problem, I emptied, refreshed/reloaded several times, restarted Firefox - nothing has worked.

    I checked the page in IE8 and all changes are not displayed correctly.  I used BrowserLab to display a preview in IE, Firefox (same version 3.6 which I use) and Safari, and all 3 display correctly version update of the page.  Visualization in 'live' of Firefox seems to be the problem, and I've looked everywhere for answers. Help is needed and appreciated!

    It is possible that you redefined the site incorrectly and put the files to the wrong address on the server. Carefully check both your local and remote sites definitions.

  • My Firefox has just automatically updated itself to the version 42. The extention under modules page does not display the extensions I have installed.

    My Firefox has just automatically updated itself to the version 42. The extention under modules page does not display the extensions I have installed. The plug in page shows the plug ins I installed. How can I fix it? This happened on my 64 bit Windows 7 partition. I installed the extension "classic add-on" to see if she could solve the problem. There is unfortunately no. I have a screenshot. I'm not sure if I have permission to upload it to the media gallery. I also use Linux, but I did not upgrade that are still there.

    It is possible that there is a problem with the files that store the registry extensions.

    Delete the files (extensions.json, extensions.sqlite, extensions.ini) extensions.* and compatibility.ini in the profile folder of Firefox to reset the extensions registry.

    New files will be created if necessary.

    See "extension corrupted files:

  • my iphone 5 s has been disabled. I'm trying to restore my iphone with itunes and itunes asks me to put the password for my iphone. but my iphone does not display the unlock screen. What should I do now?

    my iphone 5 s has been disabled. I'm trying to restore my iphone with itunes and itunes asks me to put the password for my iphone. but my iphone does not display the unlock screen. What should I do now?

    Hello

    Follow the instructions here:

    If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

  • URL address box does not display the current page.

    With the 4.0.1 update, the URL address box does not display the current page.

    All that shows is the text: «Go to web site»

    To now see the url of the current page, you need to make a right click the empty space is the address box and press the button "esc".

    Is there a way to display the url of the current page?

    This problem may be caused by an extension that is not working properly.

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

Maybe you are looking for

  • Green

    Can someone help me, I recently installed Skype on my HTC sense and everyone I said video call I am green, I can't imagine there is a problem with my camera? All ideas

  • Re: Satellite P505-8007 - update of graphic adapter

    Is it possible to upgrade the graphics adaptor (ATI Radeon Mobility HD 4200): at least 512 MB 256 MB?

  • Display and graphics with my Satellite P100-192 issues

    Hello I have following problems with my almost 3 year old Toshiba Satellite P100-192: In the last few weeks my latop ran very hot when I played games or used another difficult software. Last week, the computer began to freeze the screen for a while a

  • Pavilion DV6: upgrading RAM for Pavilion DV6

    I'm looking to update my RAM and would appreciate any help in determining what to buy to upgrade my RAM full system. It is a product B5S11UA #ABA Pavilion DV6, totally stock number. I think that the vehicle currently has 6 GB of RAM. Thank you!

  • Drive external DRIVE does not display full disk space

    Hello I have an external 500 GB HARD drive and it is stated only 93GB is available. I want to format the drive to FAT32 so I can use all of the space. I know there are limitations when using FAT32. Can someone tell me how to format the drive and use