Receives the "Acquiring Network Address" message when I try to connect to my network, but never connects to the internet.

Similar Questions

• I have an Airport Express, which gives an unexpected error message when you try to connect to an existing network of WEP.  Any ideas.  Tried the factory returned. He was knocked offline when someone dug into the telco cables.

  I have an Airport Express, which gives an unexpected error message when you try to connect to a router WEP (Verizon) existing iOS9.3.2

  It flashes orange, but can not be reconnected to the router or to the title of the Setup Assistant or Airport utility.  Is there a way to reconnect to WIFI or should I bite the bullet and connect via Cat5e and be done with it.  My VPN works much better without AirPort Express connected.

  Sorry, but there is no WEP settings AirPort Utility on the iPhone or iPad, or any Mac version of AirPort Utility which was used for the last 4 years or so.

  If you have an older Mac still running AirPort 5.x utility or a PC with the AirPort for Windows utility installed on the device, the WEP settings that could be used to get the Express to connect to a WEP network there.

  As you know, WEP has not been secured for a number of years, and there are any number of free utilities available on the Internet, which is crack a WEP network in a few seconds. Thus, all those who want to be on your network will not have problems to do very quickly.

  But it's your call.

• I keep getting the 'Network security Key Mismatch' message when you try to connect using my wireless internet connection. I don't know that I use the password.

  I keep getting the 'Network security Key Mismatch' message when you try to connect using my wireless internet connection.  I don't know that I use the password.

  Hi oms1957

  I recommend you try these methods

  Method 1:

  Reset the wireless network and make sure that you set the level of security to WPA2-Personal, as it is recommended.

  Here are some links that will help you set up the wireless network

  What are the different wireless network security methods?

  Method 2:

  If this does not clear if installed third-party antivirus and then try to connect. If the problem is resolved, you have to uninstall the antivirus and reinstall back or check with the settings.

  Method 3:

  Cycle power to the router and check if this is useful.

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Keep gettig this error message when you try to connect to Firefox, the proxy server refuses connections.

  Redownloaded Firefox and keep getting this error message when you try to connect: proxy server refuses connections

           Firefox is configured to use a proxy server that is refusing connections.
  

   Check the proxy settings to make sure that they are correct.
   Contact your network administrator to make sure the proxy server is
     working.
  

  Go to Options > advanced > network > connection > settings, then choose 'no proxy '.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  It is important that you keep updated IE. The information included with your question indicates that you use IE7; you need to update to IE8 for your own protection. IE9 will be available for Windows XP.

  • http://Windows.Microsoft.com/en-us/Internet-Explorer/products/IE/home

• Get 810 error message when you try to connect to the VPN using L2TP protocol

  Original title: L2TP will not let me connect.

  I am in Workstation 9 and in each virtual machine, I have an AD - DC (2K8R2Enterprise), CA and RRAS (2K8R2Enterprise) and my last vm is a win7 (they are all tests).  All are not updated, but the PPTP, IKEv2 work without problem.  The second server that has the CAs and RRAS is a member of the AD - DC server.  The Win7 is not on the domain and I have Win7 a client certificate.  I have ensured that the CA root of trust is in the user store and computer Trusted Root CA.  I have also ensured that the Win7 client certificate is in the user store and personal computer.  I get a 810 error message when I try to connect to the VPN using the L2TP protocol.  I have exhaustively studied this problem and I can't find a solution to this problem.  I also raise the functional level of the domain to 2K8R2.

  I think this should be a simple and easy solution, but where can I find the answer?
  Please help me.
  Thank you for your time.
  Allan.

  Hi Allan,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

  If you need any other assistance, let know us and we would be happy to help you.

• Receive dns error message when you try to connect to the internet.

  I'm trying to access the internet but I can't and I am connected but whenever I try to open a web page to his not to come but keeps on saying dns server responds not... How to solve this

  I can't access any web page either and I am connected but cannot access web... troubleshooting report indicates that the dns server is not responding.

  Hi sandyrb,

  1. What is the error message when you try to access the internet?
  2. You use Internet explorer to access the internet?
  3. Did you the latest changes on the computer?
  4. What is the type of internet connection you use?
  5. You have security software installed on the computer?
  6. How do you know that the computer is connected to the internet?

  Method 1

  Check if the problem persists in mode safe mode with network mode and post back with the result.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 2

  If the problem does not persist in the safe mode with network, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 3

  If the previous step fails, then reset TCP/IP on the computer and check if that helps.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  How to troubleshoot connectivity TCP/IP with Windows XP

  http://support.Microsoft.com/kb/314067

• error message when I try to connect to the internet wireless

  When I try to use the Internet, I get a message saying 'the settings saved on this computer for the network do not match the requirements of the network. I don't know how to change the settings so that it works.

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path? Good luck that the router settings have changed, or maybe it was
  reset - do you have other computers that connect to this router? You system connects to other
  WiFi as a library, Starbucks or other sites?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Object moved here - error message when you try to connect to the live account.

  I have Vista Home premium. When I try to log in my account online, I get a message saying: "Object moved to here" and I do not get the sign in page. The error message appears for two seconds and disappears. Then the screen become white. I contacted the phone support and they suggested the higher post my question here. Any suggestions? Thank you in advance.

  Hello

  The question you have posted is related to Windows Live and would be better suited to Windows Live help community. Please visit the link below to find a community that will provide the best support.

  http://www.windowslivehelp.com/product.aspx?ProductID=15

• Error message when you try to connect to the remote desktop

  I got a set up for a while - Remote Desktop connection, but yesterday, my power is out, turn off my computer while I was on it.  Now, whenever I try to connect to my remote desktop I get the following error Message: "unable to load the ActiveX control terminal services."  Make sure that c:\windows\system32\mstscax.dll lies in the path"I use Windows Vista.  Any help would be GREATLY appreciated! :)

  Hi Kit_b25,

  Try to run the system ("sfc/scannow" command) File Checker. More info...

  Ramesh Srinivasan, Microsoft MVP

• Firefox 15.0.1 gives an error message when you try to connect to my account @u.boisestate.edu

  I am a student at Boise State. When I try to access my broncomail account, or when I try to access broncomail mailed to Firefox, I get the following message is displayed.

  The page is not redirecting properly

           Firefox has detected that the server is redirecting the request for this address in a way that will never complete.
   This problem can sometimes be caused by disabling or refusing to accept
     cookies.
  

  Cookies are not disabled, and I have not had this problem with earlier versions of Firefox.

  The other thing I notice is that the little green circle on the tabs for Blackboard BroncoWeb often seem to never ceases to turn.

  Firefox reload usually does not help that much because most of the problems are caused by settings and customizations. Before you try this, you might want to try Firefox reset. More info in this article: Firefox Refresh - reset the settings and Add-ons.

  I should have checked that before... when I click on connect to Broncomail, I find myself at Google. Is Broncomail actually a customized version of Gmail? I think one or two people say this problem on Gmail every week.

  The typical cause is probably crossed to cookies, so if you a not already clear your cookies from Google.com , please try this.

  About performance issues, try disabling use Firefox of accelerated graphics hardware. You need to restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Orange Firefox button or classic menu Tools > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

• Having 2 error message when you try to connect to in__1. Unable to connect to a windows service__2. Location is not available

  System: Windows Vista Ultimate Edition

  Whenever I try to open the computer, I get two error message.

  1. impossible to connect to the service awindoes: Windows could not connect to the user profile service.  This problem prevents limited users to logon to the system.  As long as administrator, you can go through the system event log to see why the service did not respond.

  2 C:\\Windows\system32\config\systemprofile\Desktop makes reference to a location that is unavailable.  It could be on a hard drive on this computer or on a network.  Make sure that the disc is inserted correctly, or that you are connected to the Internet or your network, and then try again.  If it can't be located, the information may have been moved to a different location.

  Please help, I have of these massege error for some time.

  Try the system restore
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Try to connect as a different user if the symptoms were not your user profile is damaged.
  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  I hope I could help

• (ox 80070424) error message when you try to connect to windows update view

  so I can't connect to the view to get the new directx driver.  I need cause I lost all sound on my computer

  Hello

  · What service pack is installed on the computer?

  · What is the version of directX installed?

  Try the following steps:

  Step 1:

  Run the checker system files on the computer. Link, we can see: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747

  Note that: if he asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker: http://support.microsoft.com/kb/900910 (valid for Service pack 3)

  Step 2:

  Follow the steps from the link below: no sound in Windows: http://windows.microsoft.com/en-US/windows/help/no-sound-in-windows

• Muse of error message when you try to connect / publish to Business Catalyst

  This morning I have problems when you try to publish sites British Colombia through Muse.

  Someone else?

  

  Are you facing this error whenever you publish? Is this related to a specific file or is happening with all the sites that you are trying to update or publish?

  Please create a website and publish it as a trial, after having managed to publish, open the actual file muse and then proceed to publish.

  Thank you

  Sanjit

• When I try to connect to my internet in my house is not picking up my my modem signal... any suggestions

  Since the other night, I tried to connect to internet in my house and for some reason that my computer will not pick up the signal from the modem. It does not make sense to me. He'll go get my neighbors and other peoples but not mine. My office receives the signal very well, but my laptop will not.

  Hello

  All changes made to the computer before the show?
   
  Method 1:
  Check out the link and follow the steps.
  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
   
  Method 2:
  You can also visit this link and follow the steps.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
  Method 3:
  Check out the link and follow the steps in section allows you to configure a wireless connection.
  Setting up a wireless network
  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

• "Gteko Brkr Svcs application has stopped working" error message when you try to connect to the computer

  When I connect I get this error "Gteko Brkr Svcs application has stopped working" my screen will become gray before all load.

  I can't find anything online about this.  Can someone help me?  Thank you!

  Hello

  1 did you changes to the software to the computer before the show?

  Start the computer in safe mode and check if the problem persists or not, if the question does not persist then perform the clean boot and check whether the problem is resolved or not.

  Was: start the computer in safe mode

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Start your computer in SafeMode (Windows 7)

  B: Perform the clean boot and check if the problem is resolved or not.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note: perform step 7 to reset the computer to start as usual after the boot process.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Hope that helps.